This is the third time I try unsuccessfully to install Debian as a second OS on a hard drive. When it gets to the end of the installation process the installer asks whether I want to go ahead with the Grub Boot Loader, I choose yes. The end result is however that I can't boot that partition within the hard drive -- i.e., Debian. Can someone tell me what is going on? Should I not use the Grub Boot Loader when I have more than one operating system on a machine? Should I not install Grub on the Master Boot Record (MBR)?
I've had to give up trying to install linux. It just won't work on my machine, a Presario 6370us that has been upgraded over the years such that it is not compatible with linux, apparently. (You can read my travails elsewhere on this board; thanks very much to all who tried to help.)
Now, how do I remove the GRUB boot loader from my system? I need the system to boot directly to Windows XP.
I can't start linux in any way, shape, or form, so I need to either edit GRUB inside the GRUB environment itself, or to do so from Windows.
Ideally, I'd like to remove GRUB entirely. Failing that, I'd like to edit the GRUB config file so that only Windows is an option. Failing that, I need to make Windows the default OS.
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
Installing upgrade from Open SuSe 10.3 to 11.3. I did it on a 32-bit laptop, aborted half way through and couldn't get back on because GRUB loader was corrupted. No problem as there are lots of 32-bit GRUB loaders available for download, install was successful 2nd time. I need to do the same for a desktop x64bit dual core Intel. Can't find a x64bit GRUB loader on internet - how do I extract from my current set-up an emergency GRUB-loader CD?
I've installed Ubuntu on my new desktop alongside Windows 7 (each OS is on a separate drive), I seem to have run into a small problem. Let me start with what I did:
- Unplugged 1TB drive from the PSU, BIOS was not seeing my formatted (and thus empty) 500GB drive and I couldn't put it into the boot order at all with the 1TB turned on.
- Loaded up the boot CD and was able to install Ubuntu 10.1 on my 500GB drive.
- Did a bit of configuring, shut my PC off and plugged my 1TB (with Windows 7) drive back in. I tried to see if I could now see my Ubuntu drive in BIOS but nothing is there - just the Windows drive is in the list of available drives to boot from (along with DVD-ROM and USB).
This is where I've run into my problem. What I want is to have a nice GRUB boot menu at the start like any other dual-boot system but just have the two operating systems on separate drives altogether.I did it this way because I was having issues with the advanced partition menu on the boot CD so just went ahead and followed the KISS method by unplugging the Windows drive.
I was told by a friend that if I put my Ubuntu drive into the first position in my boot order and the Windows drive in the second, then I could boot into Ubuntu and run a GRUB update command (he told me to google it) and that would create the necessary GRUB that had the entries for Windows 7 and Ubuntu.Both operating systems are 64-bit, I imagine that might make a difference in whatever help you guys can offer me. I love the hell out of both OS's and want to be able to use them interchangeably.
I was installing sqeeze i386 on my laptop VOSTRO 1400 and got this the 'grub-pc' package failed to install into /target/. without the GRUB boot loader, the installed system will not boot.
I am thinking about maybe trying "LILO" [URL] ....
For my boot loader, from what I have read it sounds even more tempting.
I am totally sick of GRUB, even though it is what seems to be the most popular,and is what normally is used as the "default" when any linux system is installed, that is what the install ISO's use, but anyway, that is another topic, over the years, "grub failing", has been a problem for me , many times.
Disk 0 (500GB): Windows Vista Disk 1 (1TB): Windows 7 Disk 2 (160GB): Ubuntu
My boot disk is Disk 0. Currently when I turn on the PC, GRUB loads from Disk 0. I can then choose either Ubuntu or Windows Loader. If I choose Windows Loader (also located on Disk 0), I can choose to load Windows Vista or Windows 7. I like this setup, but I would like to move the loaders (exactly as they are) to Disk 1 so that I can format Disk 0.
One thing I notice and hope someone here can steer me in the right direction. When I start up my computer I have the list of options to choose from, if I choose to boot into Win 7 I am the presented again with another boot menu from windows. I would like to remove the Windows boot loader.
is it possible to use a Windows-based recovery partition on a dual-boot computer to overwrite the Ubuntu partition and remove the GRUB loader? For instance, if you booted up your computer, accessed the hidden recovery partition and used it to reset the computer to it's factory default settings, would that effectively remove the Ubuntu partition and the GRUB loader? Would a completely new installation of Windows overwrite/uninstall Ubuntu and GRUB automatically?
I have XP, Win7 Pro and F 11 installed. Before I installed F 11, Win 7 boot mgr was working fine. I then installed F 11 and I went to System/Admin/bootloader to edit it and it wouldn't bring up the boot loader. In the attachment was the error msg. Now my only option when I boot up is F 11.
I do not have access to the Win 7 DVD only the F 11 install disk since I am on a fishing trip and need to use Win 7. How can I repair to the grub boot loader to boot into Win 7?
I have Lenny, and Jaunty Jackaope installed on the same hdd. Jaunty Jackaope was installed 2nd so it has control of grub (I don't know if that is the correct expression) I want to remove Jaunty Jackalope however I know from past experience that after I do this I will no longer be able to boot into Lenny as I will get a grub error at startup. How to I give boot/grub to Lenny so that I can remove the other operating system?
I'm trying to install Fedora onto a computer that has Windows XP on the first of two SATA drives. Windows 7 is on the second drive.
I installed Fedora no problems on a 14 gig free space I created on the first drive and told it where and what my other OS's were. Fine so far. I didn't tell it to overwrite the MBR on the XP (first) drive. I took the second option which I "think" put the boot loader on the fedora partition.
All good - till I rebooted and I just saw my Windows 7 loader with my options for XP and Windows 7 but no Fedora.
So, if I overwrite the MBR on the first drive, will that mean I can't access my Windows 7 installation?
I can't boot to the grub boot loader now. It only boots into the grub command prompt. What should i do?I understand grub is the bootloader but I don't know what else to call the command prompt
I am currently rebuilding a couple laptops and a desktop to dual boot Windows and Suse 11.2. Windows is installed on partition 1. On the laptops, the build goes fine and dual boot with grub is OK. No issues. But on the desktop, the exact same build (after all the on-line updates, etc) fails with "Operating system not found" on the final (and first) boot. It seems that the Suse 11.2 build is somehow resetting the active partition and the boot does not see grub or Windows. When I reset partition #1 back to "active, only Windows loads. So I guess I need to fix this by reinstalling grub. Or use the Windows boot loader.
(1) Where is grub located on my system?
(2) What partiton is the Linux master Boot record If I wanted to use the Windows boot loader and do the following command to grab the 512 bytes I need:
dd if=/dev/sna? of=grub.bin bs=512 count=1
My partition layout is below. This is output from gdisk.exe in DOS7. It's an 80gig drive.
I want to set up grub for a dual boot system of xp and vista. The thing is that I have vista installed and would have to install it ance again after setting up XP in order to use the microsoft bootloader. And secondly I slowly want to get into linux...
This is how I tried it: I have four partitions on my HD and want to install the Bootloader on /dev/sda3. I started up the ubuntu live cd, mounted partition3, opened the console and tried this command line which I found in a tutorial
grub-install --root-directory=/media/hda3 --recheck /dev/hda However I get the following error message:
mkdir: cannot create directory '/media/hda3/boot': No such file or directory
I installed ubuntu using wubi and then I tried installing grub 2 but it failed. I need a way to reinstall the mbr sp it will load the windows 7 loader from the first partition.
I just did a fresh install of 11.4 and I LOVE IT!!! One of the little issues I am having though, is that there is no login screen. No matter what settings I change it still auto-logs me in.
I am using GRUB and the Boot Loader Location has both "Boot from MBR" and "Boot from Root Partition". Is this right? I would think that I should just boot from the MBR.
I would like to recover my grub installation in a dual boot system. if there is an easy way to recover grub using flash disk? If yes is your suggestion opensuse developed? (currently running 11.3) . It would be nice also to have some gui just to make things easier. If not I assume that then the only option is the boot from dvd. Is that right?
A failed upgrade, from disk images, of Fedora 10 to 11 resulted in no GRUB bootloader main menu appearing on bootup (no WIN, no LINUX choices from which to boot). I am booted directly into the GRUB command shell...so, no WIN, no LINUX, nothing. And my understanding of GRUB shell commands is very low.I have 2 hard disks, WIN on the first, LINUX on the second. I believe GRUB Bootloader is on the first disk.Sadly, I have no external install media.An old grub.conf hardcopy indicates that root =/dev/sdb2, root (hd1,0), kernel /vmlinuz....olderversion...(relative to /boot),initrd /initrd...olderversion... (relative to boot). and WINDOWS on (hd0,1), with chainloader +1
I need to somehow get past this grub shell, and re-install/re-instate the grub bootloader, so it can boot normally.What grub command(s) must I use? I've played around with the commands, but with no success.I worry that if I can't resolve this, the whole machine may be useless.
I install windows XP and then unix centos. But again when I reinstall Windows xp then my unix centos not shows in boot menu. It automatically goes in windows xp. Now how can I recover my Unix centos.
Im currently not an linux expert so I turn to this forum after several attempts to fix my issue with grub.
I had a dualboot single HD with both win7 and win8.1 when I decided to install debian wheezy from usb.
I deleted the win7 partition and installed debian there. The partition scheme is separate /home
After reboot I automatically get into the "Grub rescue mode" and now I´m stuck.
I tried the commands:
set prefix=(hd0,msdosX)/boot/grub/ Insmod normal
I have msdos1, msdos3, msdos5 and msdos6 but nothing is listing anything from the grub rescue mode.
I get the "UNKNOWN FILE SYSTEM" error and cant get past that.
I also tried booting into rescue mode from usb iso install but nothing happens when choosing to repair GRUB.
The listed devices in rescue mode are:
/dev/sda1 /dev/sda2 /dev/sda3 /dev/sda5 /dev/sda6 debian uses sdb 1-2 and sdb1 is the only option to Reinstall GRUB on but it gives me "Unable to install GRUB in /dev/sdb1 This is a fatal error" message /dev/sdb1 /dev/sdb2
I installed Win7 after Ubuntu (10.10). I attempted to reload grub so that I would be able to run them dual boot and now I can't load anything.
I followed the guide here: [url] and went threw it a couple of times now to make sure it wasn't user error.
I am using a live cd from 10.04 because it's the only one I have. Any chance that's why it isn't working properly? I wouldn't think so, but I assume that it's possible.
If that is the case; Any way to solve it without using the live cd? I cannot burn a new disk because I have to boot from disk to use my computer right now.
I just get a flashing cursor on a blank screen when I try to load.
I have Windows 7 on my machine right now but want to dual boot with either Ubuntu or another Win OS.....is there a way to dual boot with ubuntu and keep my windows boot loader or do I need to have grub?
i want to install opensuse on my new lap top i partition my hard (600gb) with 5 parts:
c: 97 gb d: 150 gb e: 150 gb f: 100 gb g: 50 gb and 38 gb unlocated part
in opensuse instalation , the yast makes a 2gb for swap 14gb = root , 21 gb = home, but in Instalation Overview under Booting has a red error: the Boot loader Installed On a Partition that does not Lie Entirely Blew 128 GB .The system maight Not Boot;
