Fedora Installation :: Got An Error Found Something That Said Add "vga=ask" To The Grub Loader, Which Still Loads Into Shell?
May 27, 2009
00:12.0 VGA compatible controller: nVidia Corporation GeForce 7150M (rev a2)Linux rpmL 2.6.27.24-170.2.68.fc10.86_64 #1 SMP Wed May 20 22:47:23 EDT 2009 x86_64 x86_64 x86_64 GNU/Linuxere my predicamenti got a HP pavilion laptop running that Nvidia graphics card, on that build. So it was a fresh FC10 install, but it would hang up, and only load if i hit the keypad/mouse, which it still does. Eventually it gets to the shell login screen. root login and i then did a yum update, which got me to the current build. that didnt work. NO x window still.
tried startx again, got me an error. found something that said add "vga=ask" to the grub loader, which still loads into shell, but when i do startx, it made me a xorg.conf.new, which i copied into /etc/X11 rebooted and tried again. still have to move the mouse or keypad for the load to start (no idea y) but it loads to shell, and startx works.
View 2 Replies
ADVERTISEMENT
Oct 12, 2010
I am unable to get a knoppix poor mans install to boot using grub and opensuse 11.3. I have tried the same method on another box, same opensuse 11.3 and it boots fine. However, no matter what partition I put the knoppix files in on the problem box, it is the same error. I also have several opensuse kernels listed in the grub menu that were added when the kernel was updated, so the knoppix grub entry is off the screen. I have to down arrow to list the knoppix entry. I read that with this kind of error using ubunto as the host system, that running update-grub will force grub to look for bootable kernels and add it to the menu of boot choices. Does the same fix apply to opensuse 11.3? I have two versions of puppy linux working on this box as a poor mans install, so I am at a loss why it will not see the knoppix kernel. Can it be a problem of too many kernels listed in the menu.lst file? This box is a live update from opensuse 11.0.
View 13 Replies
View Related
Jan 2, 2011
I've installed Ubuntu desktop edition 10.04 so far, using alcohol tool as I wanted to install "inside Windows".I successfully installed it everything seems to be fine to me. But, the problem is when I select Ubuntu from boot menu it stops at a console with some grub loader message and doesn't shows login screen.
Please, not that I had installed it a couple of time before and it worked perfectly for some reason and Windows problem I had to uninstall it.
I can also post pictures of that screen if you require, I've to capture it through my mobile phone, which is with suck graphics.
Message:GNU GRUB version 1.98-1ubuntu5
View 4 Replies
View Related
Sep 2, 2009
A failed upgrade, from disk images, of Fedora 10 to 11 resulted in no GRUB bootloader main menu appearing on bootup (no WIN, no LINUX choices from which to boot). I am booted directly into the GRUB command shell...so, no WIN, no LINUX, nothing. And my understanding of GRUB shell commands is very low.I have 2 hard disks, WIN on the first, LINUX on the second. I believe GRUB Bootloader is on the first disk.Sadly, I have no external install media.An old grub.conf hardcopy indicates that root =/dev/sdb2, root (hd1,0), kernel /vmlinuz....olderversion...(relative to /boot),initrd /initrd...olderversion... (relative to boot). and WINDOWS on (hd0,1), with chainloader +1
I need to somehow get past this grub shell, and re-install/re-instate the grub bootloader, so it can boot normally.What grub command(s) must I use? I've played around with the commands, but with no success.I worry that if I can't resolve this, the whole machine may be useless.
View 9 Replies
View Related
Nov 16, 2010
I have a laptop with windows vista installed on the internal hardrive.Last March I installed wanted to start to use linux so I brought a separate external hardrive partitioned it to enable media storage on one section and installed ubuntu on the other half. It works fine and so does the windows vista on my internal hardrive, however I have to have the hardrive plugged in to boot.Until now this hasnt bothered me, however I've recently started to take my laptop into university and cannot switch it off unless I have the external hardrive with me as I cannot switch it on without it.With it plugged in it loads up GRUB and then gives me the option to load either Ubuntu or windows vista, however if it is not plugged in when I power up it says GRUB loader failed.It also occured to me that if for some reason my external hardrive fails in the future I wont be able to use my laptop anymore.Has the installation of ubuntu (and GRUB) altered the MBR?
Is there some way I can edit the settings so that I can load windows vista without the hardrive plugged in, and then if it is plugged in I get the choice which one to load?
View 6 Replies
View Related
May 24, 2011
Ive installed about 50+ boxes with ubuntu/mint/fedora/etc but f15 is giving me a real headache...
I tried a fresh install over f14 with this drive (sdb, sda is my backup disk)
Installed obviously in part7
After rebooting (successful copied live image on hdd)
Code:
After another couple of installs (with lvm & w/o lvm) & even disconnecting the second harddrive -> same issue
Typing 'ls' in the rescue grub prompt returns
Code:
Cant 'ls /' into a single them - unknown filesystem (grub is installed in mbr of sdb) 'linux rescue' (wanted to try manual grub installation) command didnt work either.
Now again on fedora 14, same installation procedure, works fine. (and i wont bother doing a full distro upgrade from f14)
View 1 Replies
View Related
Jul 15, 2010
I had Fedora 12 and windwos 7 installed,today i reinstalled windows, and when i restart i dont get anymore the boot menu to choose between linux and windwos and i tried to reinstalled fedora but i am getting this error Grub Loader error 17,what can i do to solve this problem,i am new to linux
View 4 Replies
View Related
Feb 13, 2010
I used proprietary software (acronis trueimage) to clone an Opensuse 11.1 machine, onto another machine with somewhat distinct hardware (different motherboard, less memory). I expected to have to change entries in /boot/grub/menu.lst, /etc/fstab, etc. I was told a good way to do this was to use the Opensuse DVD's "repair installed system" feature.
When I ran the repair, I was informed that "bootloader configuration file contains errors". I attempted to re-install the bootloader, but received this unhelpful error: "An error occurred during boot loader installation. Retry boot loader configuration?". When I boot the system, I just see the text "GRUB ", followed by a flashing underscore character.
View 4 Replies
View Related
Jun 5, 2011
I performed a clean install of Fedora 15 from DVD and it goes fine until the end when the install program says to reboot the computer. Once I do that, the computer hangs before Grub loads, i.e. just after all of the BIOS messages, so there isn't any error message to indicate what is wrong. I had no issues with Fedora 14.
View 3 Replies
View Related
Jun 8, 2010
What I like is to install Fedora13,Win7,WinXp, and Musix. One HD 1.5TB Ilike on that is win7 and Fedora13,the other one with 400GB WinXP and Musix. What should I do so I can setup on GRUB. How can I set up like that.
View 2 Replies
View Related
Mar 20, 2011
I installed Fedora 14 alongside windows, overwriting my old Ubuntu 10 partition. Unfortunately, now the GRUB loader only recognizes my Fedora partition and the built-in windows recovery utility partition. I checked the disc utility and my windows partition still definitely exists, I just can't seem to boot into it.
View 7 Replies
View Related
Feb 4, 2010
I tried to install Open Office following a guide in OpenOffice.org but after several attempts debian refused to boot properly. I decided to re-install Debian 5.0. When we came to the installation of the boot loader GRUB refused to be installed. I stopped the installation expecting to go back to the beginning. But now it tries to boot saying:Grub loading stage 1.5.
Grub loading, please wait...
Error 15
This is an old Toshiba 3110 with Windows 98SE installed which I have successfully customized and do not want to loose. What can I do to get back into W98SE and then re-install Debian properly?
View 14 Replies
View Related
Jun 10, 2009
I successfully installed Fedora 11 from the DVD iso. At the end, the installation program prompts me to reboot the system. But when the boot loader appears after rebooting, there are only the old entries.
I have 2 IDE disks and one sata disk. The first IDE disk is hd0, the second IDE is hd1. The SATA disk is hd2. In the setup, I selected hd0 to install grub. Fedora 11 was installed on the SATA disk (hd2).[edit] I forgot to say, that Fedora 10 is on /dev/sda and Fedora 9 on /dev/sdb
View 7 Replies
View Related
Jan 25, 2010
I installed fedora 12 to a 4GB flash usb flash drive. When I reboot and select windowsxp, grub displays a blank screen and hangs up.
[root@localhost Terry]# fdisk -l
Disk /dev/sda: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x41ab2316
Device Boot Start End Blocks Id System
[Code]....
View 2 Replies
View Related
May 24, 2010
I do not know what to do, i cannot load windows partition. it just loads grub again. this must have been something that happened when i upgraded to the 10.04 or w/e. can someoen help me out with what i can do to stop this or fix it. maybe i can reinstall but i want to know what will work first, i do not have a lot of time to fool with my computer like this again. i spent a week getting ubuntu on my computer the first time so i do not ever want to spend that much time again especially in finals week. !
View 1 Replies
View Related
Jun 7, 2010
I have an HP Pavilion m7480n PC with Windows XP installed on the C-drive. I successfully installed FC 12 onto the spare USB drive. When I rebooted the PC all I got was a blinking underscore at the extreme upper left position of a totally black screen. After a bit of experimenting I found that if I hit the F1 key during the boot process, go into the BIOS setup, do nothing within the setup, and press ESC to get out of the setup then the PC will go back into the boot cycle a second time. During the second time however a small text message appears with words to the effect "Press any key to enter GRUB..." after which the GRUB splash screen comes up with the choice for FC 12 or "Other" (referring to Win XP). At that point I can boot into either one.
View 4 Replies
View Related
May 21, 2010
My problem now is: After booting my laptop, Ubuntu doesn't load and i'm stuck in a GRUB command prompt and not sure what to do. If i type "boot" I get "error: no loaded kernel"Here is how I got there:1. I ran 9.1 healthily until I was prompted to do an upgrade. I ran the upgrade but some packages weren't authenticated so I ran a partial upgrade. 2. I reboot but I'm faced with "Error 15: File not found". After some research and going through the forums, I thought I found the solution by following these instructions to copy the GRUB files from the Live CD (https://help.ubuntu.com/community/Gr...0from%20LiveCD)3. Once I completed this, I'm now stuck at a grub> prompt when rebooting (the error 15 has disappeared). (the screen header informs me i'm dealing with "GNU GRUB version 1.98-1ubuntu5"Any thoughts on what I might have done wrong? From my reading today, I might have installed GRUB2 (even though Grub legacy would have been appropriate?). What is the best way out?
View 9 Replies
View Related
Nov 2, 2010
Have a Dell Inspiron 4100 laptop. 1GB RAM and 1 Ghz processor. Has a working install of Oracle Enterprise Linux 5.4 OEL uses Grub version 0.97 My OEL install works well and I do not want to make any changes to it such as upogarding GRUB to a later version etc.
I have installed Xubuntu mini and this completed without a problem.
I have a single hard drive.
I went into OEL and mounted the Xubuntu root drive so I could see the /boot/grub/menu.lst file.
I copied the entries for the main xbuntu kernel etc and pasted them into my OEL grub.conf.
title Ubuntu 10.10, kernel 2.6.35-22-generic
uuid d6ed555c-54a3-4639-af25-3582c60624ad
kernel /boot/vmlinuz-2.6.35-22-generic root=UUID=d6ed555c-54a3-4639-af25-3582c60624ad ro quiet splash
[Code]....
I am doing this so someone else can borrow this laptop for internet use for a few weeks and OEL is not very user friendly and also want to protect my install.
View 9 Replies
View Related
Dec 17, 2010
I did the Synaptic Upgrade to Maverick Meerkat 10.10 on my laptop. Win 7 on one of two separate hard drives, and Ubuntu on the other. I kept all the previous configurations the same when the software asked the question about changing to the new formats. On boot up the laptop went right into "grub rescue >".
I located the partitions and found the Ubuntu partition on (hd1,1).
I set the prefix and root which now show:
prefix=(hd1,1)/boot/grub
root=hd1,1
I am not sure what Modules to Load, because I can not find any references to them in my big Ubuntu Book.
I tried "insmod /boot/grub/linux.mod", but it returns "error 'grub-xputs' not found".
When using the "initrd" command, it responds "unknown command". Trying to exit Grub 2 with "normal" also yields an "unknown command".The command "exit", "help", and "linux" returns an "unknown command".
The hold up seems to be that pesky 'grub-xputs'. I can not find out what it is.
Is there a list somewhere of Grub 2 Commands?
I had a similar problem upgrading from 9.10 to 10.04 last April. I was able to reload grub and get the laptop operating normally. This time I am unable to get the laptop out of grub rescue.
View 9 Replies
View Related
Aug 11, 2011
I've had my Ubuntu crash and had to reload it. I;ve reloaded 9.1 and am now getting the error
GRUB loading.
error: file not found
grub rescue>
I have tried a number of solution attempts I've found on the internet with no success.
I have Windows 7 also loaded however I'm not getting a Grub menu only the error above. I seem to have a number of Linux partitions I believe my correct one is on sda7. I had at one stage tried to have a boot partition on sda4.
View 3 Replies
View Related
May 19, 2010
I just (for the first time ever) installed a version of Ubuntu. It is 10.04. I installed off of the Live Disk. I was having a great time until the first time I went to boot into it and I got the message
"Error: No such device: "long number" Grub Rescue> "
[Code]...
View 3 Replies
View Related
Jan 7, 2010
I just got a new computer that has Windows 7 Ultimate, and I want to install Ubuntu to a partition that I created. I want to be able to re-add my Windows 7 to the GRUB, without erasing either of my operating systems. I have seen people that changed the menu.lst file, but got the BOOTMGR not found error. Will I get this problem? My computer came with one drive split in two partitions, WIN7 and DATA. I took 150GB out of the DATA partition to make a new one called Linux. So, how would I put Windows 7 in GRUB, but not erase eithr operating system, and will I get the BOOTMGR not found error?
View 3 Replies
View Related
Sep 21, 2010
I was installing sqeeze i386 on my laptop VOSTRO 1400 and got this the 'grub-pc' package failed to install into /target/. without the GRUB boot loader, the installed system will not boot.
View 3 Replies
View Related
Nov 28, 2015
I just installed debian from debian-live-8.2.0-amd64-standard+nonfree.iso and after installation, which finished without problems, I cannot boot the system. I get the error:
Code: Select allfile '/boot/grub/i386-pc/normal.mod not found
From grub-rescue via ls command I see that I don't have the i386-pc folder inside /boot/grub. I have only two files:
unicode.pf2 and grub.cfg
View 7 Replies
View Related
Apr 30, 2010
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
View 9 Replies
View Related
Jun 29, 2010
I have a Windows 7 OS installed as my main OS, it installed on its own HDD with 3 other data storage drives.
On my 5th drive I installed a copy of OpenSUSE 11.02 to see if I like it. I have decided I don't wish to keep it so I reformatted the drive while in Win7. Of course on restart I got the Grub 1.5 Error 22. All my HDD's are seperate and there are no partitions.
I have had to reinstall OpenSUSE just to get my PC to boot.
All I want to is remove OpenSUSE from my computer without losing my Win 7 install.
My Win 7 install disc fails to recognise my Win 7 so I can not get the recovery command prompt/repair options.
Can someone explain in say 5 simple steps to get back my original MBR so I can boot straight to Windows as I can't seem to find a guide that actually explains what to do. Either by doing it in OpenSUSE 11.02 or Windows 7 Ultimate 64-bit.
View 9 Replies
View Related
Jan 10, 2010
I have a dual boot Vista/ Kubuntu and my vista SP2 has made both my vista and kubuntu unable to boot completely. I've been through many steps to recover vista but no restore point works and such so I am going to use my Toshiba recovery partition to reinstall but what I'm wondering is if after I do that will the grub loader be affected and give me the error 22? The two are on separate partitions and I've been meaning to get rid of Kubuntu from my laptop since I have it on my pc
View 1 Replies
View Related
Jan 15, 2009
I'm running Fedora 10 [KDE] on an Acer laptop and am having problems configuring "hot keys" for it. First thing that needs to be mentioned is that the hotkeys used to work when I was running it on Gnome without me having to do anything. I assumed that this will be the case with KDE too. In any case, I think driver installation is supposed to be quite straight forward. There are two packages: acer_acpi and acerhk and different installation instructions for each one of them. The problem I am having is when I run the makefile script for either one of these, I get the following output in the terminal:
Quote:
Makefile: line 5: KERNELSRC?=/lib/modules/2.6.27.9-159.fc10.x86_64/build: No such file or directory
Makefile: line 6: KERNELSRC: command not found
Makefile: line 6: KERNELSRC: command not found
Makefile: line 6: shell: command not found
Makefile: line 6: shell: command not found
Makefile: line 8: KERNELVERSION: command not found
[Code].....
I think build-essential and some other packages are normally needed, but since you can't get them for Fedora (?), I groupinstalled "Development Tools" and some other group.
View 4 Replies
View Related
May 13, 2011
Short story: upgraded to Natty, slowed graphics, re-installed Lucid, got Error: file not found and grub rescue prompt
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 1 Replies
View Related
Jul 5, 2010
i just installed the Debian on my old laptop. The install went fine but after that, the GRUB menu loads and freezes. I simply can't do anything. I checked menu.lst and the timeout is set to 5 but still nothing happens. It won't load. I then tried to load with the "super GRUB disk"but the same problem - as soon as it loads from the CD, it freezes and I can't do anything. Before I had Xubuntu on the same laptop but there was no Grub menu. It simply loaded. There's only 1 OS on the laptop /currently Debian/ - no windows, no other Linux.
View 14 Replies
View Related
