Ubuntu :: Uninstalling Kubuntu - Grub Loader Error 22
Jan 10, 2010
I have a dual boot Vista/ Kubuntu and my vista SP2 has made both my vista and kubuntu unable to boot completely. I've been through many steps to recover vista but no restore point works and such so I am going to use my Toshiba recovery partition to reinstall but what I'm wondering is if after I do that will the grub loader be affected and give me the error 22? The two are on separate partitions and I've been meaning to get rid of Kubuntu from my laptop since I have it on my pc
View 1 Replies
ADVERTISEMENT
Apr 30, 2010
Not a major issue but my Ubuntu boot screen change to the old classic Orange theme after i installed Kubuntu on a different drive and ofcourse a new Grub loader as the Kubuntu installation prompted. It can't be because of the Kubuntu installation but i can't find any other reason for that to happen.
View 3 Replies
View Related
Feb 4, 2010
I tried to install Open Office following a guide in OpenOffice.org but after several attempts debian refused to boot properly. I decided to re-install Debian 5.0. When we came to the installation of the boot loader GRUB refused to be installed. I stopped the installation expecting to go back to the beginning. But now it tries to boot saying:Grub loading stage 1.5.
Grub loading, please wait...
Error 15
This is an old Toshiba 3110 with Windows 98SE installed which I have successfully customized and do not want to loose. What can I do to get back into W98SE and then re-install Debian properly?
View 14 Replies
View Related
Mar 15, 2010
I installed Backtrack 4 and it is set up as a dual boot with my Windows 7 x64 bit. I want to uninstall Backtrack because I am going to put it on a different computer. The problem is - I can't do it. My laptop is an Asus K61IC, and it doesn't come with an installation CD, because the OS was factory installed. It comes with a recovery wizard instead, which gives me the options to 1) recover to first partition only, 2) recover to entire HD, and 3) recover to entire HD with 2 partitions. Because of Grub and it asking for me to choose what operating system to boot when I start my computer, when I recover Windows 7 to the entire HD and try to boot, it gives me Grub error 22. I need to fix my MBR so that the grub menu is also deleted and all of Backtrack 4 is removed, actually letting me back onto my Windows 7. I need a way to delete the Linux partition, and fix the MBR, but I don't know how to do that because I don't have an installation disk.
View 9 Replies
View Related
Nov 16, 2010
I have a laptop with windows vista installed on the internal hardrive.Last March I installed wanted to start to use linux so I brought a separate external hardrive partitioned it to enable media storage on one section and installed ubuntu on the other half. It works fine and so does the windows vista on my internal hardrive, however I have to have the hardrive plugged in to boot.Until now this hasnt bothered me, however I've recently started to take my laptop into university and cannot switch it off unless I have the external hardrive with me as I cannot switch it on without it.With it plugged in it loads up GRUB and then gives me the option to load either Ubuntu or windows vista, however if it is not plugged in when I power up it says GRUB loader failed.It also occured to me that if for some reason my external hardrive fails in the future I wont be able to use my laptop anymore.Has the installation of ubuntu (and GRUB) altered the MBR?
Is there some way I can edit the settings so that I can load windows vista without the hardrive plugged in, and then if it is plugged in I get the choice which one to load?
View 6 Replies
View Related
Jun 29, 2010
I have a Windows 7 OS installed as my main OS, it installed on its own HDD with 3 other data storage drives.
On my 5th drive I installed a copy of OpenSUSE 11.02 to see if I like it. I have decided I don't wish to keep it so I reformatted the drive while in Win7. Of course on restart I got the Grub 1.5 Error 22. All my HDD's are seperate and there are no partitions.
I have had to reinstall OpenSUSE just to get my PC to boot.
All I want to is remove OpenSUSE from my computer without losing my Win 7 install.
My Win 7 install disc fails to recognise my Win 7 so I can not get the recovery command prompt/repair options.
Can someone explain in say 5 simple steps to get back my original MBR so I can boot straight to Windows as I can't seem to find a guide that actually explains what to do. Either by doing it in OpenSUSE 11.02 or Windows 7 Ultimate 64-bit.
View 9 Replies
View Related
Jul 15, 2010
I had Fedora 12 and windwos 7 installed,today i reinstalled windows, and when i restart i dont get anymore the boot menu to choose between linux and windwos and i tried to reinstalled fedora but i am getting this error Grub Loader error 17,what can i do to solve this problem,i am new to linux
View 4 Replies
View Related
Oct 12, 2010
I am unable to get a knoppix poor mans install to boot using grub and opensuse 11.3. I have tried the same method on another box, same opensuse 11.3 and it boots fine. However, no matter what partition I put the knoppix files in on the problem box, it is the same error. I also have several opensuse kernels listed in the grub menu that were added when the kernel was updated, so the knoppix grub entry is off the screen. I have to down arrow to list the knoppix entry. I read that with this kind of error using ubunto as the host system, that running update-grub will force grub to look for bootable kernels and add it to the menu of boot choices. Does the same fix apply to opensuse 11.3? I have two versions of puppy linux working on this box as a poor mans install, so I am at a loss why it will not see the knoppix kernel. Can it be a problem of too many kernels listed in the menu.lst file? This box is a live update from opensuse 11.0.
View 13 Replies
View Related
Feb 13, 2010
I used proprietary software (acronis trueimage) to clone an Opensuse 11.1 machine, onto another machine with somewhat distinct hardware (different motherboard, less memory). I expected to have to change entries in /boot/grub/menu.lst, /etc/fstab, etc. I was told a good way to do this was to use the Opensuse DVD's "repair installed system" feature.
When I ran the repair, I was informed that "bootloader configuration file contains errors". I attempted to re-install the bootloader, but received this unhelpful error: "An error occurred during boot loader installation. Retry boot loader configuration?". When I boot the system, I just see the text "GRUB ", followed by a flashing underscore character.
View 4 Replies
View Related
Sep 1, 2010
under gnome (OS: ubuntu lucid 10.04) i installed KGet and it was working fine with no problems or ( extra PKGs installation ) ... then i wanted to try KDE desktop so i installed kubuntu-desktop , after that gnome windows and message alerts have been transformed to KDE form even if i was logged with gnome ...
I uninstalled kubuntu-desktop using instructions provided here : [url] but then i lost kget .... now when i try to install it again , synaptic iforms me that i have to install a lot of extra packages as well .. what is the shortest way to install and run KDE program on my gnome desktop properly .. ?
View 4 Replies
View Related
Jan 20, 2011
I have windows 7 installed on my copmuter and I ran the alternate disc cause the live disc didn't work for me. So installing was smmoth and I did everything right excpet for the grub part. It asked to be a master loader or something and I said yes. After restarting I see the grub menu but I only see two ubuntus(recovery mode) on the list and 2 test thingys ( memory test) So I go to the ubuntu tab and I get kubuntu ( as ecpected). Right now I am using kubuntu and it is fine but?
View 9 Replies
View Related
May 27, 2009
00:12.0 VGA compatible controller: nVidia Corporation GeForce 7150M (rev a2)Linux rpmL 2.6.27.24-170.2.68.fc10.86_64 #1 SMP Wed May 20 22:47:23 EDT 2009 x86_64 x86_64 x86_64 GNU/Linuxere my predicamenti got a HP pavilion laptop running that Nvidia graphics card, on that build. So it was a fresh FC10 install, but it would hang up, and only load if i hit the keypad/mouse, which it still does. Eventually it gets to the shell login screen. root login and i then did a yum update, which got me to the current build. that didnt work. NO x window still.
tried startx again, got me an error. found something that said add "vga=ask" to the grub loader, which still loads into shell, but when i do startx, it made me a xorg.conf.new, which i copied into /etc/X11 rebooted and tried again. still have to move the mouse or keypad for the load to start (no idea y) but it loads to shell, and startx works.
View 2 Replies
View Related
Sep 21, 2010
I was installing sqeeze i386 on my laptop VOSTRO 1400 and got this the 'grub-pc' package failed to install into /target/. without the GRUB boot loader, the installed system will not boot.
View 3 Replies
View Related
Sep 2, 2009
A failed upgrade, from disk images, of Fedora 10 to 11 resulted in no GRUB bootloader main menu appearing on bootup (no WIN, no LINUX choices from which to boot). I am booted directly into the GRUB command shell...so, no WIN, no LINUX, nothing. And my understanding of GRUB shell commands is very low.I have 2 hard disks, WIN on the first, LINUX on the second. I believe GRUB Bootloader is on the first disk.Sadly, I have no external install media.An old grub.conf hardcopy indicates that root =/dev/sdb2, root (hd1,0), kernel /vmlinuz....olderversion...(relative to /boot),initrd /initrd...olderversion... (relative to boot). and WINDOWS on (hd0,1), with chainloader +1
I need to somehow get past this grub shell, and re-install/re-instate the grub bootloader, so it can boot normally.What grub command(s) must I use? I've played around with the commands, but with no success.I worry that if I can't resolve this, the whole machine may be useless.
View 9 Replies
View Related
May 18, 2010
PC: Dell Precision T7400.O/S: Windows XP SP3 64-bit & Scientific Linux 5.3 64-bit
The above PC has 2 HDDs installed one has XP and the other Scientific Linux.
Problem: XP needed to be re-installed, i've done this now but now the GRUB Boot loader doesnt load - So just boots straight into XP.
Qustion: Is there anywhere to fix the GRUB? Without wiping the 2nd HDD and re-installing Linux!
Let me know if you need any more info
View 11 Replies
View Related
Mar 21, 2010
I made a slight mistake after editing my partitions with Gparted. I accidentally installed Grub 2 on my Ubuntu partition instead of re-installing it on the MBR.
I've since installed Grub 2 on my MBR, but how do I get the Grub 2 installation off of my Ubuntu partition?
View 1 Replies
View Related
Jun 19, 2011
I use Ubuntu on his edition 8.10 and have always been very pleased, until 11:04 last version. Actually used a dual boot for constant use of certain programs that only work on windows. By installing the latest version, everything is as before except that I can not see the initial grub, show me out of range. My boot loader resolution is 640x480 and still I can not see the grub at startup.
View 1 Replies
View Related
Jun 24, 2011
And by blank screen I mean after I pick whatever I want on GRUB. There's NOTHING.I even tried going in recovery mode. But same thing.Right now I'm using an older recovery. The newest thing is completely broken. And the regular one for the Ubuntu version doesn't work either.
View 3 Replies
View Related
Oct 26, 2010
I have two hard-drives. The first, C: (sda1) has Windows 7 x64 installed on it. The second hard-drive, D: (sdb1), was partitioned when I installed Ubuntu 10.04 into two separate partitions: NTFS and Ext3.
I wanted to remove the Ext3/Ubuntu partition and reclaim that space (i.e. completely remove Ubuntu). I did NOT install using Wubi. I booted up Win7 x64, went into Disk Management, right-clicked the D: partition corresponding to the Ext3 filesystem (shows up as unrecognized in Disk Management), and opted to delete the volume. I then right-clicked on the NTFS D: partition, and opted to Extend the Volume to reclaim the previously partitioned space.
When I rebooted, I ended up with the following error:
Code:
error: no such device: f81368be-ea53-43d2-b8de-bb52b5ac322c.
grub rescue>
I cannot get beyond this screen. Rebooting always puts me at the grub rescue prompt. I have looked at the HOWTO: Purge and Grub Rescue Prompt threads, but was not able to understand the instructions and am therefore asking for your help. However, I was able to install the boot script as those threads suggest, and here is my results.txt:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #2 for /boot/grub.
[code]....
View 6 Replies
View Related
Dec 14, 2010
I'm dualbooting Slackware and Gentoo on my homeserver. Some weeks ago I built grub with a slackbuild-script, it was the new version of grub but it did not install properly. Since then I could only boot Slackware but not Gentoo. Today I tried to install grub from the Gentoo-partition (I chrooted to Gentoo). This did not work due to an errormessage of grub that "stage1 could not be read".
Afterwards I tried to install lilo, this failed at first attempt, but the with some warnings lilo executed. When I rebooted after the lilo-install, I had grub again at the bootscreen without the option to boot Gentoo. I decided that I have to clean the mbr of /dev/sda and found a solution with the dd command. Here my
[Code]...
Fortunately I have a second disk /dev/sdb in the server and have now installed the bootloader on the mbr of /dev/sdb. But in the long run I want to change this.
View 2 Replies
View Related
Aug 26, 2010
I need to re install the grub loader on a Acer Netbook. I made a Live CD and tried to follow the directions given in the documentation but I am having no luck. Does anyone know a reasonably straight forward way to re-install GRUB back onto the native Hard Drive.
View 7 Replies
View Related
Aug 26, 2010
Every dual boot guide and every dual boot I've set up I've done the same way. Always install Windows first then install Ubuntu. Well, this time Windows didn't let go of the bootloader it seems like. I have kind of an awkward setup for hard drives...32gb SSD /2X250gb raid1 /home 3gb(at beginning of 1tb HDD) swap
The rest of the TB is Windows 7 Home Premium. I installed Windows 7 without problems the installed Ubuntu 10.04 x64 without problems. It asked if I wanted grub to overwrite mbr I said yes. Computer rebooted... Straight into Windows. I downloaded EasyBCD and added grub to Windows boot menu. The option works great, goes straight into grub. Grub even has Windows listed.
Why is my computer using Windows boot manager and how do I switch it to grub?
View 9 Replies
View Related
Sep 6, 2010
had a dual booted laptop that i have removed XP from. now it still brings me to the boot menu how can i remove this so i will reboot into Ubuntu faster?
View 2 Replies
View Related
Feb 4, 2011
1q):: in ubuntu if grub (loader) has been currepted,while booting it will show grub>(has gone)so how to reload/restore the grub instead of installing linux(ubuntu) again.2)q:: in ubuntu if grub has been currepted,while booting it will show grub>(has gone)if i have some imp data in ubuntu ,i want take data back.so using linux live cd(i used but i didnt see the data,i think we have mount to /mnt then we will see/access/copy the data)how to see/access /copy the data3q)::same question grub has been cuureptedve dueloot(windows+ubuntu),instead of installing ubutntu/ubutnu grub loader,can we do only windows as working(means i decided to remove the ubuntu , i want use the only windows,without distrubence the windows data(if i have some data in windows))
View 3 Replies
View Related
Jan 14, 2010
i've a little problem with the grub loader. I've two OS in my laptot: Ubuntu 9.10 Karmic Koala 64bit and Windows 7 64bit. But i can't boot Windows 7 from the grub loader. The grub still load the /dev/sda1 partition that is the recovery partition of the laptot, while windows 7 is in the partition /dev/sda6. I tried to modify the path in the grub.cfg, but still load the wrong partition, how i can do?
View 2 Replies
View Related
Mar 9, 2010
How do I clean up the GRUB boot loader version 1.97 Beta 4.
At the moment I have the following items listed:
And the list just gets longer with every update. Why doesn't it clean itself up and only display the latest version.
View 3 Replies
View Related
Apr 4, 2010
How i can make the grub loader disappear... I don't want to choose the new kernel or memory test what so ever every time i boot up the system.
View 1 Replies
View Related
Apr 23, 2010
My laptop is set to dual boot, either Ubuntu 9.10 or Windows Vista. The GRUB loader has multiple entries, starting with Ubuntu, then several instances of Ubuntu recovery mode, before memory test and two entries for Vista, the first of which does not work. How do I delete the unwanted entries? I can press "e" to edit them, but if I do so how do I actually delete them, assuming it is safe to do so.
View 7 Replies
View Related
Jun 29, 2010
I installed Mandriva today, but it got rid of my GRUB boot loader. So I need to know how to fix this, I have Ubuntu 10.04 installed, but am currently running the Live CD from 9.10 to get me online.
View 5 Replies
View Related
Sep 30, 2010
I have always been a Redhat user, and ESXi User. I decided to try ubuntu because of it's strong recommendations as a file server. I have tried several fixes listed in the forums with no luck. I tried the live CD and I have no issues there. I tried gparted, and it sees all my drives. Seeing that most ask for the boot info script to be run, i was proactive. I know its a boot issue with were grub is pointing too. However, that is where I get stuck. I am not an expert at using grub. In a Nut shell, I had no issues installing. I choose the Jmicron 150G Raid 1 drive. Used full drive space with LVM. When it came to reboot I did, and it just sits after it does the boot from cdrom. I hate to go back to windows 7 for a file server/web server. Oh Windows was installed at one point, I think that is where the script sees the GPT partitions.
Machine details:
AMD 1055T
8G Gskill
4850 ATI card
Intel Pro 10/100/1000 PT
[Code]....
View 9 Replies
View Related
