Debian Configuration :: NVIDIA Driver 32bit Chroot On 64bit Host?
Mar 23, 2011
I have 64bit debian 6 squeeze installed on my 64bit pc. I have an NVIDIA gpu which I have installed the drivers for and they work just fine. I also have a 32 bit chroot located at /32 which was created using debootstrap. The NVIDIA 64bit driver gives the option to install compatability driver libraries into the 32bit chroot. Whenever I run any application that uses opengl rendering within the chroot, they segfault. When I uninstalled and reinstalled the NVIDIA driver without installing the libraries to the chroot, and instead replaced them with mesa gl libraries, the programs complain about framebuffer missing. They do not segfault, and some programs that can use sdl instead will work fine. I have xhost + set to allow any programs in the chroot to use the host's xorg. I have the host's proc mounted to the chroot proc directory, and i also have dev mount --bind 'ed to the chroot.
View 11 Replies
ADVERTISEMENT
Sep 25, 2009
I've been working on this for 3 days now and can't find any solution any where on the internet. (At least not one that works for me). I try to build a 32bit PHP RPM on a CentOS5.3 86x64 host. Every post I read indicates that it should be possible, but not for me. I issue the following command (found somewhere in a post):
Code:
CC='gcc -m32' linux32 rpmbuild -ba --target=i386 SPECS/php-5.3.0.spec
Then it starts:
Code:
Building target platforms: i386
Building for target i386
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.43870 .....
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.72849 (%build)
With the following command I tried I get the same error:
Code:
rpmbuild -ba --target=i386 SPECS/php-5.3.0.spec
Some rpms of interest(?)
# rpm -qa |grep "cc"
libgcc-4.1.2-44.el5
libgcc-4.1.2-44.el5
psacct-6.3.2-44.el5
pam_ccreds-3-5
pam_ccreds-3-5
ccid-1.3.8-1.el5
gcc-c++-4.1.2-44.el5
gcc-4.1.2-44.el5
View 2 Replies
View Related
Jan 24, 2010
I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?
View 12 Replies
View Related
Apr 27, 2011
My new HP625 Laptop came with SLED11 preconfigured - including such special keys as the wireless/bluetooth key etc under gnome. I need a 64bit OS and 8Gb for my applications and the HP site does not offer any explicit support for 64bit Linux. So I installed SLED64bit on separate system partition and can select now 32 or 64 bit from GRUB. There remains the problem of configuring gnome (or KDE) on the 64bit system to take advantage of the keyboard, sound, cam etc. I did find a 64bit wireless driver in the i586-Repo on the HP-site that requires the kernel from opensuse 11.3 and I got bluetooth working with gnome but just for the keyboard alone, I am stuck with finding a decent configuration under 64bit. Is it possible to migrate the system wide gnome configuration from the SLED32 bit installation (as configured by HP) to any SuSEx86_64 system?
View 9 Replies
View Related
Sep 4, 2015
i've installed debian 8 on this laptop but can't use the nvidia card from nvidia-detect can't find the card but it work 'cause i can see it in the list of hardware, 3d controller the driver from nvidia don't work, and i had a problem with force installation and xorg.conf file.. how i can make it work ? the card it's nvidia 820m
View 3 Replies
View Related
Jun 7, 2010
I recently installed Squeeze. I had sound with the video driver that came with the install. Then I installed the Nvidia driver from Nvidia website. The sound dissappeared. When I uninstalled the Nvidia driver and removed xorg.conf and rebooted again, the sound came back. Then I installed the Nvidia driver from (nvidia-glx, dev and settings) from Debian with Synaptic. The sound went away again. If I uninstall the nvidia driver and xorg.conf the sound will probably come back again. The sound driver is the one that came with the install.
The volumes are unmuted in the alsamixer. Somehow alsaconf command does not work.
My mother board is a ASUS M4N78 Pro with Nvidia IGP.
What can I do to have sound with the nvidia driver?
View 14 Replies
View Related
Apr 2, 2010
I follow a french tutorial to install the nvidia pilots. So, i did :
$ su
# apt-get install module-assistant
# m-a prepare
# m-a clean nvidia-kernel
# m-a a-i -i nvidia-kernel-source
[Code]....
View 6 Replies
View Related
May 10, 2011
I'm encountering a problem running X and Gnome from a Xen-enabled Kernel with NVIDIA Binary driver compiled with IGNORE_XEN_PRESENCE=y on debian squeeze
Hardware:
NVIDIA NVS 5100M
Kernel:
Debian Squeeze : 2.6.32-5-xen-amd64
NVIDIA Kernel from the official package
Boot and module loading are successful, but when X starts, I only get a black screen. I attached here my Xorg.0.log, however it doesn't seems to have any problem.
View 5 Replies
View Related
Jul 14, 2011
I get plymouth and install it success, but it only support nouveau(nvidia) mode.
When I update my driver with [URL] , plymouth gone.
Is there any other way to do boot-image with the driver from [URL] ?
I find super-image-manager(buc), but I can not install it.
Addition: What is buc ?
View 3 Replies
View Related
Jun 5, 2011
I have installed the Nvidia drivers on my desktop using [URL] according to the Debian way. Everything seems to be fine except the resolution. The best it will let me choose is something like 600x480. I have searched and most of what is suggested around the web is to change xorg.conf. I have tried this using different setting suggested but nothing is working. I did not have a xorg.conf file so I created one with the setting suggested on the Debian wiki.
View 12 Replies
View Related
Jul 30, 2011
I've posted here before (viewtopic.php?f=5&t=66322) about problems arising from my attempts to get an nVidia driver to work with my custom kernel. Now those problems are all fixed, and I'm back to where I was: the built kernel boots fine, but the nVidia driver fails.
The custom kernel is as near to the stock one as I can make it, I'm just trying to find a working build process at present, before trying to build a later-version kernel.
I used sgfxi with "-! 40" to build the nVidia driver for my custom kernel; it reported that everything was fine.
With stock kernel - 2.6.32-5-amd64 ...
Extracts from /var/log/Xorg.0.log:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
code....
View 6 Replies
View Related
Aug 17, 2011
After I've installed nvidia-vdpau-driver 280.13-1 from debian testing repositories, all the colors on the screen became too bright, except dark colors.
I've tried to change the values from Brightness, Contrast and Gamma, in NVIDIA X Server Settings -> X Server Color Correction, but it doesn't bring everything back to normal.
Either the nvidia driver has problems, or I don't know how to calibrate. But before I installed nvidia-vdpau-driver, I had the nouveau display driver (experimental), and all colors were displayed normally, the same as in Windows 7 and XP.
View 1 Replies
View Related
Jun 20, 2010
needed to reinstall 32bit but cannot switch to init 3 for nvidia driver.
View 1 Replies
View Related
Apr 28, 2010
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
View 10 Replies
View Related
May 19, 2010
I've built a new kernel (2.6.34) on our workstation at work. It boots and runs beautifully, but there is one minor problem. I created the kernel as a Debian package along with the kernel headers. Upon installing both and attempting to build the nVidia driver for said kernel, the installer tells me that it cannot determine the version and quits. This happens even if I manually specify the path to the headers. What's going on here, did I miss something during my compilation of the new kernel?
View 14 Replies
View Related
Dec 17, 2010
I'm running succesfully Debian 6.0 after first trying Debian 5.0 and ran into missing partitions. This is solved by using Debian 6.0 (Beta 2).
Now it's NVidia's turn: Under Ubuntu (yes...i know it by now...) you had to install a proprietary driver for NVidia to ensure that 3D was supported. What about Debian? There's nothing like this under Debian? How do i know if 3D is supported?
View 14 Replies
View Related
May 17, 2010
Using squeeze with a GeForce4 MX 440 video card (NVIDIA) I have a monitor (4/3 aspect ratio, 1024x768 usually), and a TV connected via S-video After installing the NVIDIA driver using the NVIDIA binaries I managed to have a cloned twin screen configuration working.
However, the monitor is (wrongly) detected as having size 1824x768 (aspect ratio is widescreen) Using system monitor, I can set the correct size, but only for one session; besides, the login screen too is messed up the xorg.conf file seems right: proper resolution modes are set; xorg.0.log too
View 2 Replies
View Related
May 27, 2011
I am a little confused about the Debian installer. I chose the i386 release of Debian 6, downloaded the ISO and installed in a Core2-Quad with 4Gb of RAM. That lead me to a System with a 64Bit Kernel and a 32Bit environment (is that the correct word for it?). Why would the installer chose to install a 64Bit Kernel, even if i386 installation media was explicitly selected? Though it is easy to change the kernel manually after the installation is complete, I really would like to know if there is a good technical reason for selecting a 64Bit Kernel in this case.
View 2 Replies
View Related
Aug 26, 2015
I've been bashing around this for a couple of days, and could not find answer by using google. My debian 8.1.0 jessie runs perfectly fine. To perform SSH chroot jail, I issued an apt-get install makejail.
The ssh chroot environment runs great. I used makejail configuration scripts. The man pages are perfectly available from TTY login. Yet from a SSH session (chroot jailed) the man pages could not be found.
My MANPATH environment variable points at /usr/share/man
Running "mandb -c" from a SSH session as root tells:
0 man subdirectories contained newer manual pages.
0 manual pages were added.
0 stray cats were added.
0 old database entries were purged.
simply copying the contents of the /usr/share/man to /jail/usr/share/man
and running the "mandb -c" command gives lots of "dangling symlink" errors.
Perhaps the /jail directory need some dependent files, or change file permissions somewhere but I just couldn' t figure that out.
View 0 Replies
View Related
Feb 16, 2011
I am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies
View Related
Mar 15, 2010
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
View 2 Replies
View Related
Nov 18, 2010
I used to have FC11 installed with the nvidia supplied binary driver. Worked fine, very stable. Trying FC12 and FC13 live CDs caused a hang, so I stuck with FC11. FC14 live CD did boot so I backed up my own files and did a clean FC14 install. Upgraded to get kernel 2.6.35.6-48, installed the nvidia driver from RPMFusion (260.19.21) and had a working system! Now, after a cold boot, the kernel always hangs during boot. Tried a number of kernel boot option (apci=off, noapic and a few others too). The hang is not always at the same place. The earliest it has hung is after:Disabling lock debugging due to kernel taint
Sometimes its a few lines later at:NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.12 ...(which would seem to imply that the hang can even occur a step or two before the actual driver is loaded!)
Sometimes it keeps going for a few more seconds and randomly hangs during some other driver load.
Without a specific nvidia driver the system always boots ok, so I'm pretty sure its the nvidia driver but I just can't seem to get a handle on this in a reproducible way. Sometimes, when I have make some other change, it will boot and work ok, but a reboot locks it up again (for example, in case it was SELinux, I disabled it and on the next reboot it booted and worked ok. Then, next boot, it wasn't working again). When I make changes, I reboot using the previous kernel, make the changes and reboot, with an occasional success. Once I start rebooting using the latest kernel, it always hangs.
I'd love to get a solution to this, but even some advice on debugging this would be appreciated!
I'm using 8600GT, 256Mb, PCIe card in a MA69VM motherboard with 3Gb of RAM.
View 2 Replies
View Related
Apr 18, 2016
I have amd64 Debian Jessie and i386 Debian Jessie installed on my laptop. I wanted to start x86 app that is installed on my x86 OS from my amd64 OS using chroot.
My mounts inside chroot:
Code: Select all/dev/sda7 on / type ext4 (rw,relatime,data=ordered)
/dev/sda5 on /tmp type ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda5 on /etc/resolv.conf type ext4 (rw,relatime,errors=remount-ro,data=ordered)
tmpfs on /dev/shm type tmpfs (rw,relatime)
proc on /proc type proc (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,mode=600,ptmxmode=000)
none on /sys/fs/cgroup type tmpfs (rw,relatime,size=4k,mode=755)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
/dev/sda5 on /var/lib/dbus/machine-id type ext4 (rw,relatime,errors=remount-ro,data=ordered)
sda5 is host OS and sda7 is guest OS
when I start any x86 app I can see "failed to create secure directory (/run/user/1000/pulse) permission denied" how to make pulseaudio to work inside chroot?
also what this command exackly does?
"pactl load-module module-simple-protocol-tcp rate=48000 format=s16le channels=2 source=auto_null.monitor record=true port=8000 listen=127.0.0.1"
View 2 Replies
View Related
Dec 24, 2009
I had a fully working Nvidia driver setup in FC 12 with no problems using an old LG monitor (LCD panel) on a VGA connection. I have just replaced the monitor with a newer Dell model that has a DVI connection. I plugged it in and got nice Post Screen, FC 12 boot progress display but when it got to displaying the login screen it went black.
Ctrl +Alt+F2 took me to a command prompt where I can type commands no problem. If I change the driver to the Nouveau (and Chattr +a the xorg.conf file) I get a lovely gui. So far nothing I have tried has let me use the Nvidia driver. I have searched around Google and tried nvidia-xconfig, system-config-display, livna-config-display xrandr (which fails to work at all) but so far I have got no where.
View 5 Replies
View Related
Apr 12, 2016
I'm using Debian 8 with GNOME 32bit. I installed a driver with ndiswrapper for my old D-Link DWL-G650M.
If i using the default network manager to connect with a Free wifi the connection works fine. But if the wifi have the password the connection doesn't work.
I. using my phone Android to create the Router-Wifi like this:
SSID: AndroidAP5
Password: BillyBob
Encryption(the one allowed): WPA2 PSK
With network manager gnome is impossible to connect. I changed in setting the password type with WPA2 but the system doesn't connect.
I tried to connect manually and i updated the file /etc/network/interfaces as the follow:
Code: Select allauto wlan0
iface wlan0 inet dhcp
wpa-driver wext
wpa-ssid AndroidAP5
wpa-ap-scan 1
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK
wpa-psk 18[...]
After this I tried to execute the follow command :
Code: Select all/etc/init.d/networking restart
And the system returns:
Code: Select all[ ok ] Restarting networking (via systemctl): networking.service
but nothing else happens. The internet connection doesn't work. The Android phone not detect PC connection IN.
View 3 Replies
View Related
Mar 15, 2011
I am using bitlbee 1.0.3 with ircII for a long time since etch is released. Mainly for MSN, Jabber, Yahoo, Sametime communications. But the old version lacks MSN offline message and sametime protocol support and the yahoo protocol doesn't work at all. Does anyone successful in compiling bitlbee and libpurple in lenny 32bit?
View 3 Replies
View Related
Apr 5, 2011
I'm installing a non-X server using squeeze 32bit netinst iso, expert installation. I don't know that I can specify "debian-installer/framebuffer=false" during the installation, after reboot I got a framebuffer display with console fonts smaller and fonts look like ubuntu. I search around I can edit GRUB config for the resolution items or disable framebuffer. How can I disable the framebuffer (use normal text system fonts) when booting in LILO?
I got everything installed and setuped, I don't want to re-install the OS again.
View 8 Replies
View Related
Nov 18, 2010
I am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".
It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.
View 6 Replies
View Related
Jul 24, 2010
I get this error on enabling nVidia repo and downloading driver from YaST.
Code:
Switching the use of "nv" driver of X.Org to "nvidia" driver of NVIDIA
------------------------------------------------------------------------
head: cannot open `/etc/X11/xorg.conf' for reading: No such file or directory
SaX2 generated xorg.conf not available!
grep: etc/X11/xorg.conf: No such file or directory
[code]....
View 9 Replies
View Related
Jul 7, 2011
Currently using Nvidia driver version 195.36.31, it's the version that works with Nvidia-kernel-dkms, would updating Nvidia driver to the current 275.09.07 driver version break my setup?
View 3 Replies
View Related
