Debian Configuration :: Squeeze On Thinkpad R400 Laptop Getting Very Hot?
Apr 6, 2011
I have Lenovo Thinkpad R400 laptop. It has Intel Centrino Core 2 Duo processor with ATI Radeon 3400 series graphics card and Intel Mobility chipset series 4 Integrated graphics controller. I have Squeeze ( stable) installed on it with kernel 2.6.32-5-686 .
My laptop gets very hot within 10 minutes whether I do any task or not. Also battery life is almost 40% as compared to Windows. I am more worried about temperature as it remains completely cool in windows. Mostly CPU load remains around 10% and CPU spends 99.99% time at 800MHz clock. I believe heat generated is by graphics card chipset.
Following are some information about my machine
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[Code].....
View 5 Replies
ADVERTISEMENT
Sep 28, 2010
I have Debian Squeeze x64 on ThinkPad T61p with standard 2.6.32-5-amd64 kernel. thinkpad_acpi loaded as module, suspend to RAM works fine from menu in KDE as well as by closing the lid, however machine doesn't appear to react on pressing Fn+F4 which should put it to sleep as well. I've read through thinkpad_acpi documentation and asked Google but so far can't find the solution. Can anyone, point me in correct direction?
View 6 Replies
View Related
Feb 14, 2010
I am running Debian Squeeze ( kernel 2.6.32-trunk) 64-bit on this machine - "most" of the hardware can talk to Linux or vice-versa. I am, however, having trouble finding a suitable free / non-free driver to work with the abovementioned card. It would seem that this card is too "new" at the moment (February 2010).
View 3 Replies
View Related
Mar 2, 2011
how to fix the detection of ps2 mouse under Debian Squeeze? It is the optical mouse with wheel, red light shines, but mouse doesn't work.
View 14 Replies
View Related
Apr 6, 2011
Anyone have any comments or issues with running debian on a Thinkpad SL510?
[URL]
It has the Intel GM45 chipset, Intel Core 2 Duo, and Intel GMA 4500MHD video. I guess I am concerned about the wireless as well but cannot seem to fine the brand card it has.
View 5 Replies
View Related
Aug 10, 2011
I have a new Thinkpad T520 from work and am trying to put Debian 6 on it. I previously had a Thinkpad T42 and was able to install Debian 6. I recall having to find the driver and install it separately, so I downloaded all of the non-free drivers, but the network detection step doesn't seem to let me select my own driver.
I've been thru this at least 4 times, both the standard 6.01 and the AMD64 bit version, both behave the same. This has the (unfortunately) the Thinkpad b/g/n wireless card, but the wired ethernet is the Intel 82579LM gigabit. Seems there would be a driver with Debian 6 that would support that one.I can't stand running Windows 7.
View 12 Replies
View Related
Mar 29, 2010
I have same problem described here:
http://www.thinkwiki.org/wiki/Problem_w ... e_clicking
The command: #hdparm -B 254 /dev/hda -- works
Now, I should create:
an executable file named 00DISK in /etc/pm/sleep.d with the following content
View 1 Replies
View Related
May 14, 2011
My wireless network is down. I got thinkpad x120e, chipset: Realtek RTL8188CE, driver: rtl819ce.
Here is what I did so far:
upgraded to 2.6.38-bpo.2-686
installed firmware-linux-nonfree
Added the firmware file from the repo since it's not yet packaged in firmware-realtek and reloaded the module.
'iwlist sc' shows: 'wlan0 Interface doesn't support scanning : Network is down'
'dmesg |tail -20' shows:
rtl8192ce:rtl92c_download_fw():<0-0> Failed to request firmware!
firmware 0000:04:00.0: firmware_loading_store: vmap() failed
I also tried the following commands:
ifdown wlan0 ; ifup wlan0
ifconfig wlan0 up
Relevant bug: [URL]
Step by step, in case someone is interested:
add to sources.list: deb [URl] squeeze-backports main
aptitude update
sudo aptitude -t squeeze-backports install linux-image-2.6.38-bpo.2-686
install this package: [URL]
get the first file: [URL]
add to driver:
mkdir -p /lib/firmware/rtlwifi
mv rtlwifi_rtl8192cfw.bin /lib/firmware/rtlwifi
modprobe -r rtl18192ce; modprobe rtl18192ce; dmesg | tail -20
View 3 Replies
View Related
May 25, 2011
I don't know if these are related, but I have had occasional lockups, where no input has any effect and then it shuts down, and am usually unable to resume from suspend on closing the lid.
Here are the specifics. Thinkpad x120e, AMD e-350, ATI radion 6310 graphics, Intel 320 series SSD 80 GB, no bluetooth.
The ethernet and wireless cards, as given in lspci, are
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
[Code].....
View 10 Replies
View Related
Jul 6, 2010
I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
View 14 Replies
View Related
Feb 8, 2011
I recently just installed Squeeze on an ia64 system and was having some troubles with running VNC.I get the following error, more specifically for some reason I get a malloc - memory corruption error:
Xtightvnc(9165): unaligned access to 0x60000000001ea06c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea074, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea07c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea084, ip=0x4000000000268280
[code]...
After display all the code above, it just stops. The port 5901 is still closed - if it runs properly, would it open automatically?Is there something that is incompatible? Or am I missing some system configuration component?
View 1 Replies
View Related
Jul 13, 2010
My system is fully updated, and I haven't seen any unusual behavior. This message is listed at boot for the last few cycles:
startpar: service(s) skipped: dirmngr ... (warning)
"(warning)" is in red. The dirmngr man page is over my head. Is this serious? If so, what do I need to do?
View 3 Replies
View Related
Apr 6, 2011
I have a Fujitsu Siemans Amilo A1630 installed with squeeze and am having problems making the headphone jack work with ALSA, there is no sound from this port and jack auto-detect does not work. All drivers are present and correct and necessary modules for my sound device appear to be loading properly, the device seems fully functional except for headphones.
View 6 Replies
View Related
Apr 2, 2010
User familai with amd64 for computational chemistry and i386 for desktop. Seeking advice from users who succeeded in arranging a laptop with Debian squeeze or lenny, wireless LAN, 3D acceleration video, flash for speech. The laptop WITH STANDARD USA KEYBOARD should be available from European market resellers.
View 1 Replies
View Related
Feb 19, 2011
how to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
View 7 Replies
View Related
Mar 27, 2011
I'm running Debian Squeeze on my laptop my laptop speakers do not work but when i plug in something into the headphone jack I then have sound (to the speakers plugged into my headphone jack).
View 7 Replies
View Related
Feb 3, 2010
I am currently running squeeze with the 2.6.32-trunk amd64 kernel.
If I close the laptop lid the screen will not turn back on and the laptop becomes unresponsive. The only way to get it functioning again is to hold the power button down until it dies.
View 9 Replies
View Related
Apr 5, 2011
I installed Firestarter firewall on debian Squeeze.Now i note there is a gui available in System->Administration which apparently does not need to be running all the time - its not set up to start on boot.When I boot I notice the boot message has a line saying "Starting Firestarter firewall .... failed"When I am logged in and type "/etc/init.d/firestarter status" as the Firestarter FAQs say, I get"Firestarter is running... ... (warning)"I can run the gui manually and still same message.
View 2 Replies
View Related
Aug 28, 2011
When I activate Tor in Iceweasel, it forbids me access to the internet completely. Even attempting Google results in "Iceweasel is configured to use proxy server that is refusing connection".
I have seen this in Lenny, too - it was caused by activating Tor without having installed privoxy. I installed privoxy and everything was okay. In Squeeze, Tor is using polipo. Polipo is installed and running. I have not played with settings of polipo or Tor, the configuration is the same as it was after installation.
What can be wrong? I am a rather an user than a networking guru. I am connected to internet by means of DHCP, no local lans, no special routings, no additional proxies. I have already tired to reinstall polipo.
View 2 Replies
View Related
Feb 1, 2010
i try to install a recent squeeze of this January on a new laptop, HP dv6-2044el. The installation get blocked on the "Detect network hardware" step. The network interface is a "Realtek RTL8168d/8111D Family PCI-E GBE NIC controller".
View 1 Replies
View Related
Feb 15, 2010
Just installed squeeze on a new laptop(had been runny Lenny on my older one with no issues, but no sound or wireless on the new one).I decided to install the ATI drive for my Radeon Mobility 4500(or some close revision) because the fan is constantly running and based on some other postings, it seems that it could be the graphics card causing it.Downloaded the driver from ATI's site and it seemed to install fine but when starting X.
View 11 Replies
View Related
Jun 20, 2010
When I try to downgrade from sid squeeze I don't get GDM running just a login promt after a reboot.Have also reinstalled nvidia driver but still only login promt.I did aptitude update and aptitude full-upgrade after changing sources.list from sid to squeeze.
View 2 Replies
View Related
Oct 19, 2010
Got a problem mounting my Windows partition in Squeeze. It keeps refusing to mount it for me in Dolphin. I am a member of the disk and fuse groups, /dev/fuse is owned by root:fuse, and /sbin/mount.ntfs points to /sbin/mount.ntfs-3g, which in turn points to the ntfs-3g executable. I kind of need this ASAP. I am supposed to be finishing with this machine in 35min, and I am dead in the water without the ability to copy some files from the Squeeze ext4 partition over.
View 14 Replies
View Related
Oct 21, 2010
I installed Debian Squeeze from a net install to a raid 1 array. I have been having a lot of troubles related to being able to write to one or more of the mounted drives - even touch gives me errors.
The most interesting line from dmesg is:
Here is the full output from dmesg:
I found a thread that indicated that this bug was fixed in the next kernel version: 2.6.32-6. I am willing to upgrade the kernel to get rid of my problems. Is a squeeze kernel at 2.6.32-6 or higher available? If so, where? I have not compiled my own kernel, and am not very interested in getting into that.
View 8 Replies
View Related
Dec 20, 2010
I use my laptop at the college, and I've to suspend him frequently. So, I've decided to install the package pm-utils, to hibernate my PC, instead of power off it. When I try to do "# pm-hibernate", a tty appear, and this error is displayed :
[3506.405310] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2
[3506.405310] PM: Device usb1 failed to freeze: error -2
This is the result in pm-suspend.log :
Initial commandline parameters:
[Code]....
View 14 Replies
View Related
Feb 6, 2011
I have upgraded my server to Debian 6.0 Squeeze but it looks like some of my sites are not compatible with PHP 5.3.x so I would like to revert to previous 5.2.6 version.So my question is what to do?a) Remove PHP 5.3.x from system via apt-get and install my old 5.2.6 from old archives at /var/cache/apt/archivesorb) just try to update from archives PHP to 5.2.6?
-rw-r--r--. 1 root root 2413316 May 11 2008 libapache2-mod-php5_5.2.0-8+etch11_i386.deb
-rw-r--r--. 1 root root 2413290 Oct 6 2008 libapache2-
[code]...
View 10 Replies
View Related
Feb 6, 2011
As a long time user of some other distributions I decided to switch to Debian and installed 6.0 from amd64 kde cd image.Upon logging to KDE I discovered thatant locate knetworkmanager anywhere,it doesnt autostart and I could not find it anywhere else.I am connecting through a wireless network to the Internet so I cant connect through the Ethernet to download it through apt-get for example,if it is not installed by default.lly confused,knetworkmanager is standard tool in KDE but I cant find it in Debian 6.0
View 9 Replies
View Related
Dec 14, 2010
A couple days ago I installed Debian Lenny (netinst) to my friend's laptop, a IBM Thinkpad T23. Got a black screen after gdm loaded and the laptop seemed frozen. Decided to upgrade to squeeze. I edited the apt sources file and changed all the instances of lenny to squeeze, and then upgraded.Had the same display problem, but found a web site that suggested disabling acpi. So I did that, got the sound working, (needed cs46xx firmware), and all seems to be running fine.I get some weird udev messages at boot time, but I have a feeling that's due to how I upgraded. I can't copy and paste since the messages aren't in my system log. If anybody wants more information about it, I can supply it. pgrep shows two instances of udev running so it appears the messages are only warnings.When upgrading to squeeze, I used tds.net debian mirror links. Earlier today I switched to Debian's official US repo URLs and had to upgrade about 250 packages after reloading package data.
Now, when I click on System -> Administration -> Time and Date.After a couple seconds I get a dialog box that says "The configuration data could not be loaded" in bold black letters. Underneath that in smaller letters, "You are not allowed to access the system configuration" I receive that same error when accessing "services" and "users and groups."But I can access the synaptic package manager and update manager from the administration submenu.
View 4 Replies
View Related
Aug 17, 2010
I'm trying to start using Debian Squeeze 64b on my laptop, which is Dell Latitude D830 with Intel i965GM.
After Debian installation, when system should display some nice background and window which please me to log in, I see my screen gets blank, fuzzy, blank again, ...and after several times finaly all hangs. Surprisingly mouse pointer is displayed nicely and works. I can't use network on Debian becouse of windows authorization program which i can run in wine on KDE. This works on Kubuntu.
What I did already:
I installed KUBUNTU 10.04 LTS and it's doing job well.
I installed Debian Squeeze with options:
- enabled:base system, laptop
- disabled:graphical environment
After instalation I logged in on root account and did:
1. aptitude install xserver-xorg xbase-clients xfonts-base xterm
2. aptitude install kdebase kde-i18n-pl
3. aptitude install kdm
4. reboot
5. problem occurs
@2: Googling everywhere i found several installation guides pointing to instal pure KDE by installing kde-core package, but it seems Squeeze does not have it.
@3: Unfortunately this command did not install nor update anything.
All I want to do is to install pure Debian with xorg and kde core (not full kde package) for later customization.
I tried to:
- generate xorg.conf (X -configure) and place it at /etc/X11/
- use xorg.conf working for other people in web.
- dpkg-reconfigure xserver-xorg
- googling & forum search for my specific problem and for errors found in syslog; with no working solution.
View 4 Replies
View Related
Apr 3, 2010
I've been testing Squeeze to determine whether KDE4 is finally suitable for my primary machine. Everything seems to be working fine except for detection of IDE devices. My CD/DVD drive no longer automounts and the reason seems to be that no device is being created. My Lenny system detects the drive as /dev/hda, but no such device exists in Squeeze. During boot, Squeeze appears to detect the drive as /dev/sr0 (according to dmesg), but in fact that device does not exist either.I'm actually running the Lenny kernel, as I am unable to compile my Ralink wireless driver (rt2860sta) using the Squeeze kernel. Also, for inquiring minds, I use removable HDD drive bays on my systems to simplify testing.
View 9 Replies
View Related
