My system is fully updated, and I haven't seen any unusual behavior. This message is listed at boot for the last few cycles:
startpar: service(s) skipped: dirmngr ... (warning)
"(warning)" is in red. The dirmngr man page is over my head. Is this serious? If so, what do I need to do?
I have Lenovo Thinkpad R400 laptop. It has Intel Centrino Core 2 Duo processor with ATI Radeon 3400 series graphics card and Intel Mobility chipset series 4 Integrated graphics controller. I have Squeeze ( stable) installed on it with kernel 2.6.32-5-686 .
My laptop gets very hot within 10 minutes whether I do any task or not. Also battery life is almost 40% as compared to Windows. I am more worried about temperature as it remains completely cool in windows. Mostly CPU load remains around 10% and CPU spends 99.99% time at 800MHz clock. I believe heat generated is by graphics card chipset.
Following are some information about my machine
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[Code].....
I have a Fujitsu Siemans Amilo A1630 installed with squeeze and am having problems making the headphone jack work with ALSA, there is no sound from this port and jack auto-detect does not work. All drivers are present and correct and necessary modules for my sound device appear to be loading properly, the device seems fully functional except for headphones.
View 6 Replies View RelatedOfflate I installed F11 i586 on my laptop. F11 shares the hard disk with Vista Home Premium 32-bit. The problem is that when running F11 (or even Ubuntu), my system shut off suddenly(not a normal OS shut down, but a sudden power off without any warning). This could have been a hardware trouble(heating) but it doesn't happen with Vista.
Machine specifications:
Maker: Toshiba
Model: Satellite L305D-S5881
AMD Turion X2 Dual Core Mobile Processor RM-70
3072 MB 800 MHz SDRAM
I don't want to open up my machine unnecessarily, if it isn't a hardware issue.
I am not sure how to verify the bit length of the machine and the OS and does it create a compatibility issue ?
Your advise would be highly appreciated.
Raman
User familai with amd64 for computational chemistry and i386 for desktop. Seeking advice from users who succeeded in arranging a laptop with Debian squeeze or lenny, wireless LAN, 3D acceleration video, flash for speech. The laptop WITH STANDARD USA KEYBOARD should be available from European market resellers.
View 1 Replies View RelatedI'm running Debian Squeeze on my laptop my laptop speakers do not work but when i plug in something into the headphone jack I then have sound (to the speakers plugged into my headphone jack).
View 7 Replies View RelatedI am currently running squeeze with the 2.6.32-trunk amd64 kernel.
If I close the laptop lid the screen will not turn back on and the laptop becomes unresponsive. The only way to get it functioning again is to hold the power button down until it dies.
i try to install a recent squeeze of this January on a new laptop, HP dv6-2044el. The installation get blocked on the "Detect network hardware" step. The network interface is a "Realtek RTL8168d/8111D Family PCI-E GBE NIC controller".
View 1 Replies View RelatedI'm trying to start using Debian Squeeze 64b on my laptop, which is Dell Latitude D830 with Intel i965GM.
After Debian installation, when system should display some nice background and window which please me to log in, I see my screen gets blank, fuzzy, blank again, ...and after several times finaly all hangs. Surprisingly mouse pointer is displayed nicely and works. I can't use network on Debian becouse of windows authorization program which i can run in wine on KDE. This works on Kubuntu.
What I did already:
I installed KUBUNTU 10.04 LTS and it's doing job well.
I installed Debian Squeeze with options:
- enabled:base system, laptop
- disabled:graphical environment
After instalation I logged in on root account and did:
1. aptitude install xserver-xorg xbase-clients xfonts-base xterm
2. aptitude install kdebase kde-i18n-pl
3. aptitude install kdm
4. reboot
5. problem occurs
@2: Googling everywhere i found several installation guides pointing to instal pure KDE by installing kde-core package, but it seems Squeeze does not have it.
@3: Unfortunately this command did not install nor update anything.
All I want to do is to install pure Debian with xorg and kde core (not full kde package) for later customization.
I tried to:
- generate xorg.conf (X -configure) and place it at /etc/X11/
- use xorg.conf working for other people in web.
- dpkg-reconfigure xserver-xorg
- googling & forum search for my specific problem and for errors found in syslog; with no working solution.
how to fix the detection of ps2 mouse under Debian Squeeze? It is the optical mouse with wheel, red light shines, but mouse doesn't work.
View 14 Replies View RelatedJust upgraded (libudev0 and related) and system fails to mount other partitions, gives a lot of errors and drops to single mode.
View 14 Replies View RelatedDebian 5.0. Lately after login following warning popup;Your system had a kernel failure
There is diagnostic information availiable for this failure. Do you want to submit this infomation to the www.kerneloops.org
-> Yes
$ uname -aLinux vm0.debian50 2.6.26-2-686 #1 SMP Wed May 12 21:56:10 UTC 2010 i686 GNU/Linux
Reboot to old kernel 2.6.26-1 the said warning doesn't popup. Reboot again to kernel 2.6.26-2 and after login no kernel failure warning popup. I did it twice. IIRC I encountered this problem before.
I have been trying to install a command line Debian Squeeze system on n Eee PC 701., but have run into a number of problems:
1) All install info I can find assumes that the person wants to install a GUI system of some sort.
2) The Eee PC has a unique 2 MB. partition that needs to be preserved, so no guided install.
3) The Eee PC has an SSD instead of an HD. Most postings I have seen recommend an install without a swap partition, but the install (both live and text) seems to choke and despite a fresh formatting of the existing partition, claims to be overwriting existing files.
4) I can understand from the wiki that the Eee PC wireless driver (Atheros) should be included in Squeeze, but when the wireless connection and password is added, the installer claims that the password is not correct, despite me having checked it a number of times.
I hope someone can help me out. I just want to use the Eee PC for low resource stuff done on the cli like using a text based web browser to access the net through a wireless router and to hook it up to an external USB HD and to my stereo, to play my music collection.
I am having problem while upgrading system from Squeeze to sid. when I execute the command apt-get dist-upgrade, I got the following o/p:
root@Utkal:/home/utkal# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
Once in kde, after an undefined time (can be minutes or hours), mouse cursor start to have a fixed shape (if i am in iceweasel on a link, the mouse can get locked with the hand shape). In this state, the mouse cursor can still be moved, but no program can be launched or closed (X) in kde. I still can launch a new console now (ctrl+atl+F2), "ps" don't show any process consuming cpu (all processes are near 0). "sensors" shows 55*C. Other commands as "kill" going to lock, they don't work and at the same time they don't return the cursor to the shell.
View 14 Replies View RelatedI use a Debian Squeeze system running off a flash drive, i.e. based on a custom Live image running in persistent mode. It runs great and I am grateful for the existence of Debian . However, I have a question. A lot of the machines I use this pen drive on are quite old, often with 512 MB RAM and old processors. I specifically built my system using XFCE and lightweight apps off an initial live image using the standard-x11 package list (basically just Xorg with drivers and the base system). At first things ran very well, blazing fast even on the oldest systems and could comfortably run Firefox along with LibreOffice side by side (I need LO as all of my colleagues use Word docs, often with track changes, which Abiword can't handle properly). However, over time, I've found that memory usage has risen, tot he point where Firefox is now automatically killed on the older systems every time I start LibreOffice.how does one figure out why memory usage is going up? I've checked for inessential services and turned them off with "insserv -r". I've used only lightweight apps, as mentioned before. Are there other general tips on reducing memory usage?
View 4 Replies View RelatedI cannot update my system either with Update Manager nor with Synaptic. The system tries to download the updates, and then generates an error message that I have broken packages. So, I click on Fix Broken Packages, etc., and when running get the following error message:
E: /var/cache/apt/archives/libavcodec52_5%3a0.6.3-0.0_i386.deb: short read on buffer copy for backend dpkg-deb during `./usr/lib/i686/cmov/libavcodec.so.52.72.2'
This appears to me to be a system bug. I'm running the 32-bit version of Squeeze. Re-install, or ?
Running AQemu says me the following:
Could Not Get USB Information From System!
USB Support is Disabled.
Add Support proc FS TO YOUR Kernel.
I've installed 6.0.1a on my xi3 box [URL] and it works great. However when I remove the monitor and keyboard it doesn't boot (I don't know how far it gets, there is no monitor...). I did not install, and do not want, any kind of GUI interface, command line only. This is going in a closet as a solid state rsync backup repo. I have another small system (not this exact one) running Lenny that runs just fine headless - is this some kind of Squeeze regression? Is there any way I can get this running headless (I can't run Lenny on this box because I don't think the Marvell GbE driver is there or is working in Lenny.
View 7 Replies View RelatedWas wondering if I can upgrade my kernel to squeeze without affecting or hurting my Lenny system?
I want to upgrade the kernel, but leave the system as stable lenny
I know the more recent kernels have better wireless detection,etc
I would like to know which is the default audio system for Squeeze. I'll explain the reason for this question: I had a lenny desktop working like a charm until the hard disk damaged completely. After buying a new desktop computer, I installed Ubuntu 9.10 and I didn't know that the default audio system for Ubuntu was pulseaudio; so I always had problems with skype and my microphone. I remember that with my lenny desktop I never ever had any problem with my sound system and skype.
I've googled for months without finding a consistent fix for this problem in Ubuntu, I've also heard lots and lots of people with the same problem as mine and never solved it; so I decided to get rid of it and install debian Squeeze in my box, but I would like to be sure which is the default audio system for Squeeze, or at least know if anyone have had problems with skype and Squeeze.
'rolling' release as redoing install /upgrade every 6 months is getting 'old' My machine is triple boot
Hard drive is 320 GB
Windows 7 - 167 GB
Ubuntu - Maverick - 73 GB
Ubuntu - Natty - testing version - 65 GB
I do not want to screw up my 'grub' as it's been trashed a couple of times recently and had to re-install everything, which went great with install setting up partitions. I am not sure where 'grub' is installed to. I did install Windows 7 first then let installer split hard drive in half to put Ubuntu on then while installing my second Ubuntu, I let installer split the Ubuntu partition in half, hence the 167 GB Windows and the 2 smaller partitions for Ubuntu.I was thinking to maybe let Debian install over my Maverick install. Would that work and not mess up my Grub and cause me to not be able to boot and have to fix the drama?
Using the howto at http://wiki.debian.org/skype I installed Skype 2.1 beta 2. It launches OK using either skype or linux32 skype and brings up the login screen. It already has my username but when I enter my password skype crashes before logging me in. I get the error:
Inconsistency detected by ld.so: dl-open.c: 643: _dl_open: Assertion `_dl_debug_initialize (0, args.nsid)->r_state == RT_CONSISTENT' failed!
I know this is a long shot since skype isn't open source, but does anyone have a workaround?
I have recently installed Squeeze on my 2009 Acer Aspire laptop and updated the wifi firmware and still do not have wifi connection, I wasn't too concerned as I thought I would just use a usb wifi adapter however it doesn't work with that either, yet that same adpater works with Squeeze on my 2007 Desktop computer
View 10 Replies View RelatedIs there an easy way to add SATA drives to an existing system and have them m automatically at boot?So far I've been able to create a partition and format but they never mount at boot.What do I have to put in fstab so it will work?Also, since RAID doesn't work in Debian, is it possible to make two drives mount at the same folder
View 3 Replies View RelatedI can't seem to get my adapter to work on my Debian Squeeze system. I have the wpc54g linksys notebook adapter and disk... but the disk will not autorun...I have gotten as far as to the adapter being activated, shows connection 97%, but I can't surf!
View 6 Replies View RelatedI'm trying to install Debian Squeeze (net install CD) on a PC with an EX100 wireless keyboard and mouse. The system starts the install without any problem, and the keyboard works up to the first blue menu on the Debian installer then stops - the system fails to respond to any key presses.
The mainboard of the system is an Asus M2N68-AM SE2, keyboard / mouse receiver is plugged into one of the USB ports on the back. I've had a look through the BIOS, there seems to be no option relating to the keyboard. Changing the PnP O/S option seems to make no difference. I've managed to install Ubuntu without problem on this system so I know the PC and keyboard are working fine.
Things were fine for a couple months until this most recent dist-upgrade. The new grub has an incompatibility with BTRFS which nearly caused me to lose everything, as grub couldn't set up the boot system since it can't see the BTRFS partition. I worked for days trying to get help in the linux-btrfs listserv, but they don't seem to understand Debian/Ubuntu, and they kept referring me to Debian and grub devs. I asked them how those devs will know any more about BTRFS than they do, but there was no reply.
They said the new grub (1.99~rc1-13) will fix it, but unfortunately the Debian package management system was jammed by BTRFS as well and I couldn't install/deinstall anything. I finally had to unpack the grub-pc .deb and manually install it, but guess what? It didn't fix the problem. I've now had to completely rebuild my system without BTRFS. This has cost me days, which I cannot spare. I realize it says 'experimental' on the BTRFS website, but it is in the stable kernel, and there is not a word anywhere about it being completely non-functional in Debian/Ubuntu.
I'm having some trouble hooking my external flatscreen monitor up to my Toshiba Tecra's docking station and having Mint (or Debian) be happy with it. The laptop uses a widescreen monitor but my external is a 4x3; I wonder if this is causing problems. Of course, it may just be the Intel 82801G graphics adapter.et things up properly in the Display Preferences config window (I'm using Gnome, btw) but when I hit apply, the system locks and I have to hard boot. I've never set up a linux box with multiple monitors before, let alone multiple monitors that require different resolutions.
View 3 Replies View RelatedThe strangest thing happened. I installed Debian testing with the "squeeze Alpha1" netinstall cd. All seemed to go well and the installer made me pick a root password and create a normal user account. However, after the first boot my user account did not work and I could also not login as root, it looked liked I forgot the passwords for both accounts. When rebooted in recovery mode, I got Code: sulogin: root account is locked and I was automatically logged in as root without being asked for a password. Then I found out that the normal user account does not exist. I created a user acount and logged into it. I did passwd to set a password, but I got Code: passwd: Authentication token manipulation error Also, there was no home directory for the new user.
View 6 Replies View Related
