Debian Installation :: Squeeze 6.01 Thinkpad T520 Network?
Aug 10, 2011
I have a new Thinkpad T520 from work and am trying to put Debian 6 on it. I previously had a Thinkpad T42 and was able to install Debian 6. I recall having to find the driver and install it separately, so I downloaded all of the non-free drivers, but the network detection step doesn't seem to let me select my own driver.
I've been thru this at least 4 times, both the standard 6.01 and the AMD64 bit version, both behave the same. This has the (unfortunately) the Thinkpad b/g/n wireless card, but the wired ethernet is the Intel 82579LM gigabit. Seems there would be a driver with Debian 6 that would support that one.I can't stand running Windows 7.
View 12 Replies
ADVERTISEMENT
May 11, 2011
I decided to test Ubuntu 11.04 on my Lenovo Thinkpad T520 as it has no OS currently. I created USB boot media with unetbootin on a 4 Gb stick, and it worked with my old T60 but not with this T520 (it just jumps back to boot device selection few seconds after selecting USB as there was nothing written on the stick).
Specs of the machines are
T60:
C2D T5400 CPU
3 Gb RAM
ATI Mobility Radeon X1400 GPU
[Code].....
View 2 Replies
View Related
Apr 6, 2011
Anyone have any comments or issues with running debian on a Thinkpad SL510?
[URL]
It has the Intel GM45 chipset, Intel Core 2 Duo, and Intel GMA 4500MHD video. I guess I am concerned about the wireless as well but cannot seem to fine the brand card it has.
View 5 Replies
View Related
Apr 6, 2011
I have Lenovo Thinkpad R400 laptop. It has Intel Centrino Core 2 Duo processor with ATI Radeon 3400 series graphics card and Intel Mobility chipset series 4 Integrated graphics controller. I have Squeeze ( stable) installed on it with kernel 2.6.32-5-686 .
My laptop gets very hot within 10 minutes whether I do any task or not. Also battery life is almost 40% as compared to Windows. I am more worried about temperature as it remains completely cool in windows. Mostly CPU load remains around 10% and CPU spends 99.99% time at 800MHz clock. I believe heat generated is by graphics card chipset.
Following are some information about my machine
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[Code].....
View 5 Replies
View Related
Sep 28, 2010
I have Debian Squeeze x64 on ThinkPad T61p with standard 2.6.32-5-amd64 kernel. thinkpad_acpi loaded as module, suspend to RAM works fine from menu in KDE as well as by closing the lid, however machine doesn't appear to react on pressing Fn+F4 which should put it to sleep as well. I've read through thinkpad_acpi documentation and asked Google but so far can't find the solution. Can anyone, point me in correct direction?
View 6 Replies
View Related
Feb 14, 2010
I am running Debian Squeeze ( kernel 2.6.32-trunk) 64-bit on this machine - "most" of the hardware can talk to Linux or vice-versa. I am, however, having trouble finding a suitable free / non-free driver to work with the abovementioned card. It would seem that this card is too "new" at the moment (February 2010).
View 3 Replies
View Related
Aug 11, 2010
I am trying to install squeeze on a new netbook Packard Bell Dot S2 installer fails at not able to make an ethernet connection through this >> Atheros AR8131/AR8132 Gigabit/Fast Ethernet Controller. So i am unable to make progress with the install? I am using the debian-testing-i386-businesscard image.
I also have a wireless connection but thats a wpa setup that doesnt seem to be supported on the installer just wep or am I wrong?
View 4 Replies
View Related
May 14, 2011
My wireless network is down. I got thinkpad x120e, chipset: Realtek RTL8188CE, driver: rtl819ce.
Here is what I did so far:
upgraded to 2.6.38-bpo.2-686
installed firmware-linux-nonfree
Added the firmware file from the repo since it's not yet packaged in firmware-realtek and reloaded the module.
'iwlist sc' shows: 'wlan0 Interface doesn't support scanning : Network is down'
'dmesg |tail -20' shows:
rtl8192ce:rtl92c_download_fw():<0-0> Failed to request firmware!
firmware 0000:04:00.0: firmware_loading_store: vmap() failed
I also tried the following commands:
ifdown wlan0 ; ifup wlan0
ifconfig wlan0 up
Relevant bug: [URL]
Step by step, in case someone is interested:
add to sources.list: deb [URl] squeeze-backports main
aptitude update
sudo aptitude -t squeeze-backports install linux-image-2.6.38-bpo.2-686
install this package: [URL]
get the first file: [URL]
add to driver:
mkdir -p /lib/firmware/rtlwifi
mv rtlwifi_rtl8192cfw.bin /lib/firmware/rtlwifi
modprobe -r rtl18192ce; modprobe rtl18192ce; dmesg | tail -20
View 3 Replies
View Related
Jul 9, 2011
I installed the debian 6 on the tninkpad T42, use the Suspend,it can entry the suspend state，I type the key let it come back, it can exit the suspend state, But the screen always display "black",can't come back the X window.
View 2 Replies
View Related
Mar 22, 2011
My ethernet and pppoe internet connection worked flawlessly in lenny. I erased my hard drive and installed squeeze and now only internet works. (There is a pop-up that says that my wired connection is disconnected and shortly after there is another pop-up saying that my internet is connected.)1.my user is in the netdev group2./etc/network/interfaces only contains:
auto lo
iface lo inet loopback
3. /etc/NetworkManager/NetworkManager.conf only contains:
[code]....
View 4 Replies
View Related
Mar 18, 2011
I switched to Crunchbang Statler (based on Squeeze) from ubuntu 10.04 on my desktop about a month ago, and I'm loving it. I have one small issue though:My desktop machine (statler) acts as a file server using samba shares for my HTPC (ubuntu 10.04), with movies and music streaming over a hardwired powerline network. Before I switched to statler, the network performed flawlessly - I could stream all of my 1080p movies (mkv, ripped using handbrake's "high profile") and never saw any issues.Since I switched to Statler for my file server, I've been having constant buffering pauses on the HTPC when playing 1080p content. 720p plays ok, but I've also noticed it takes much longer for the movies (and music) to start playing.Networking is an area I'm pretty clueless about, but I had a working setup before. The samba shares are essentially the same, and nothing else has changed in my network. Files play ok on the desktop machine
View 2 Replies
View Related
Jul 31, 2011
Okay, so today I decided I was bored with my current Fedora 15 installation and tried a little distro hopping. Eventually I ended up at Debian Squeeze. I downloaded the cd version as a net install won't work because of driver issues. I used the graphical interface to install it.When it finished installing I booted it up, made sure everything was working. Now in all my past I think 6 linux installations, all I had to do to get the internet working was move a file someone gave me a while to my /lib/firmware. I'm not sure if this is the problem, but no matter what, where ever I go, I can't find an actual manager to connect to the internet. This might be a stupid question to a lot of people, but I'm stumped. There is nothing in the menu's.
Now I've been working with GNU/Linux for almost a year now and have come across many problems, but never like this. I've Googled up and down, and searched the forums here and still nothing. I've looked in the menu's and the only network related thing is network-proxy. Just for kicks I also tried
View 11 Replies
View Related
Feb 8, 2011
I am unable to figure out how to set up a net work printer with new squeeze installation. I have used cups ver 1.3.8 on lenny and have never had any difficulty, this new version 1.4.4 I'm unable to gain any ground with.I did a purge and re-install with no luck?
View 10 Replies
View Related
May 5, 2011
I would like to connect from squeeze to my windows network. Do I need samba server, smbclient is already installed?
If I do a doubleclick -> Windows Network then get "Unable to mount location".
If I use -> Connect to Server -> Windows Share then it works well.
How to configure samba server that I can see Windows machines in "Windows Network"?
View 2 Replies
View Related
Oct 1, 2010
i finally got X and gnome installed and working on squeeze now.but the login screen and network settings were grayed out.Since i install those things from installation CD, I am thinking there are packages missing.
View 6 Replies
View Related
Jul 31, 2011
Another noob question i guess, i've installed debian squeeze on an old laptop i have but unlike ubuntu, theres no network manager icon :S
When i use ubuntu i just right click on the network manager icon to set up my mobile broadband connection but with Debian i cant (because there's no applet) . Is there any way to make the network applet appear so i can do that ?
View 8 Replies
View Related
Dec 20, 2010
Alright, every time I boot or shutdown my routing box, it hangs at configuring and deconfiguring network interfaces. Below is my interfaces file. I see no errors or warnings in my log and I am running a pure kernel, not tainted with proprietary drivers. All of my hardware is 100% supported.
[code]...
View 14 Replies
View Related
Feb 7, 2010
I have just updated my Squeeze system. The update included a newer version of network-manager (and it can not be more than a few hours old). After the update all network functionality on my machine (via knetwork-manager) is broken. The GUI applet has no effect.
Hence can anyone help me: a) Downgrade network-manager by one version; b) Find out what is causing knetworkmanager to break; c) See if the problem is with knetworkmanager or network-manager.
View 5 Replies
View Related
May 25, 2010
I have Debian Squeeze AMD64 bit release. It finds my wired ethernet connection and ues itfine, although nothing shows up in the top right corner under the networking icon.
When I plug my mobile phone in (HTC S620) it always uses this as the main internet connection and then even if disconnected wont use my wired connection until I reboot.
Is there a way to stop it doing this or at least have my wired connction as an option so I can just click to reconnect to my ethernet connection?
View 2 Replies
View Related
Apr 17, 2011
I upgraded from lenny to squeeze on a notebook and I can no longer connect to the wireless network. The computer is an LG notebook and the network card is ralink rt2860. I am using Gnome and NetworkManager. The wireless key is WEP hex. It was working fine with lenny till before the upgrade. After the upgrade, the network card stopped working. So, I checked
$ lspci|grep Network
08:00.0 Network controller: RaLink RT2860
Then I reinstalled the driver with apt-get install firmware-ralink wireless-tools Then the network manager tray started working again and saw the network, but cannot connect. It was trying to connect but timed out and kept asking for the password. It is the correct password. I tried deleting the old connection and recreated a new one in the nm. But still does not work.
[Code]...
View 7 Replies
View Related
Apr 18, 2011
I setup the dnsmasq in debian squeeze as dhcp and dns server, for the debian host i assigned the static ip addresses, and configured the xp for dhcp. Windows XP network can't acquire DHCP address from debian squeeze with this error:
Quote:
error unable to contact your dhcp server Request has timed out.
this is the tcpdump output in debian for the xp network:
Quote:
15:12:10.631635 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:07:e9:a8:ea:93 (oui Unknown), length 300
15:13:16.611793 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:07:e9:a8:ea:93 (oui Unknown), length 300
15:13:16.611793 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:07:e9:a8:ea:93 (oui Unknown), length 300
15:12:42.631730 ARP, Request who-has 169.254.202.161 tell 169.254.202.161, length 4615:12:44.613568 ARP, Request who-has
[code]....
View 11 Replies
View Related
Sep 18, 2010
I want to install Debian 5.06 64 bit on squeeze repo. Where can I find its netinstall ISO?
View 6 Replies
View Related
Apr 15, 2011
I have and old PC and for last years i had Debian Lenny on that and it was working great but after the Squeeze release, i downloaded the first CD image and did a fresh installation but after this it boots up with no problem (i must say since in Squeeze installation the option of creating a floppy diskette was not working properly i use SuperGrubDisk2 to boot the Debian), but few seconds after logging in, the system hangs (or maybe only the X11 since i use a historic nVidia TNT2 Riva graphic card!).
View 3 Replies
View Related
May 22, 2010
This topic began in the Debian Development forum here I have successfully completed both the install and the after installation configuration. I have a fully functional system on this little baby, inspite of the fact that wireless (Broadcom bcm4312), ethernet (Realtek) and sound were initially broken.
There is a lot of assistance out there on the web. In the previous thread, I was having trouble installing any debian on a usb stick. The issues that needed resolving were 1. Bad stick
2. Incompatible kernels between boot.img and .iso
3. The method of copying .iso to the stick that finally worked was wget My first successful usb install was Lenny. Even though I upgraded the stock system with lenny-backports, I could not get wireless, ethernet or sound working the only connection I could get to the internet was through my 3g stick and that was not performing up to it's capability. I manually configured wvdial to get that working.
I attempted an upgrade to squeeze several times and each time the upgrade trashed the system. I finally found squeeze boot.img and .iso files from an eee pc blog. This allowed a fresh install of Squeeze and I was making progress. The little atom processor would not handle the b43-fwcutter driver, so I compiled one from the Broadcom site written especially for the atom processor. Now I had cable broadband supplied wireless. I got my ethernet working with help from the Gnome site technical specs on Network Manager. Simply changing ifupdown=false to ifupdown=true in the network manager config file.
Sound was activated by help from a blog entitled "Debian on the Dell Mini 9" My head is spinning now or I would be more specific and instructive on all I did to get this baby up and running. If anyone asks, I may do a how-to.
PS: Posted from that Dell Mini 9 running Debian Squeeze.
EDITED: Correction of typing errors.
View 6 Replies
View Related
Feb 10, 2011
Debian Lenny worked just great. That was my first experience of Debian. The installer recognised all my hardware and the system was soon up and running brilliantly with a few tweaks. Confident of Debian's reliability, I decided to move to Debian 6 and did a fresh install, with downloads of the new operating system rather than a distribution upgrade. The installation routines have not worked for the same computer system. I don't know if its hardware not being recognised by Debian 6 that were recognised without a problem by Debian 5??
At first, the boot-up flipped at "Waiting for /dev to be fully populated," there was a kernal panic then Debian disappeared. No signal was sent to the monitor and I had to switch off the computer manually
I was able to look into the Debian 6 OS from Arch Linux, installed on different partitions of the same hard-drive. I am able to overwrite the Debian files as root from Arch.
My i686 machine has PATA IDE drives.
Why are 2) dbus and the 3) avahi-demon failing? I need to get them started first so that I can get an internet connection and try and correct the problem with X and the wrong Nvidia driver. Is there some configuration I can do either from Arch, where I am now, or the bash prompt on Debian? Thanks in advance.
View 14 Replies
View Related
Feb 26, 2010
I haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?
View 9 Replies
View Related
Jul 6, 2010
My laptop is Toshiba Portege 2000. Every time after I installed new ubuntu release, I have to replace the xorg.conf to fix the resolution problem b/c I got 800 x 600 screen only. However, after the 10.04 installation. I only got 1/2 of the screen of resolution. I cannot even see most of my terminal screen.
View 2 Replies
View Related
Sep 26, 2010
I go to the image site for ia64 (given that my machine has an Intel Atom N450) and put the mini.iso and netboot.tar.gz files on the key, then plug it into the machine and attempt to boot. It doesn't get recognized.
View 4 Replies
View Related
Apr 26, 2011
On my squeeze OS I have texlive-latex3 installed and I wanted to install revtex package of the American Physical Society. While trying to install I was prompted to run #unzip revtex4-1-tds.zip -d /usr/local/texlive/texmf-local/ However my machine does not have /usr/local/texlive/texmf-local/ Instead it has /usr/local/share/texmf/ Will it be all right if I insert this location after -d ?
View 1 Replies
View Related
Jul 21, 2009
I tried fix I pointed here http://fedoramobile.org/Members/MrHappy/troubleshootingNetworkManager fails to see wireless networks with Intel 3945 chipsets(solution deals with the kernel module not with NetworkManager)but nothing to do. My actual problem is I can't see my wireless network but I see just those of my neighbours.I know mine is working because I can connect to using a Mac and windows.
View 5 Replies
View Related
