Debian Configuration :: CPU Temperature Reporting Varies

Mar 31, 2016

Quick background: the office in my shop is just a partitioned area so is subject to temperature and dust, just as the workshop area is. I've upgraded my desktop from an AMD Phenom II X4 955 which used to suffer overheating problems (despite regular cleaning) to an AMD FX-6300 on a Gigabyte 970A-D3P motherboard. For cooling I've fitted a Cooler Master Hyper TX3, plus various fans. Fresh install of Debian 8.3.

The cooler has certainly solved the overheating issues and the machine runs very quietly, rather than sounding like a 747 at take-off. But I'm now having some problems getting consistent reporting on temperatures.

The BIOS reports temperatures from the CPU which seem to be fairly consistently in the mid to high 30s (C).

lm-sensors and hddtemp have been installed.

sensors-detect reports (just the last section)
Code: Select allNow follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `k10temp' (autoloaded):
  * Chip `AMD Family 15h thermal sensors' (confidence: 9)

Driver `fam15h_power' (autoloaded):
  * Chip `AMD Family 15h power sensors' (confidence: 9)

[Code].....

psensor identifies AMD CPU and the NVidia GPU, apparently correctly, as it does the HDDs.

So, my problem is that the CPU temps reported by psensor and the panel app vary quite significantly with those that are reported in the BIOS. My thinking is that the BIOS is correct and that the software is either misreporting the temperatures or using the wrong sensors.

On the old machine I used to get a temperature from each core, just like in the BIOS, but now I'm only getting a single CPU reading.

View 14 Replies


ADVERTISEMENT

Debian Configuration :: Gnome Sensors-Applet - No Nvidia GPU Temperature

Jun 3, 2010

I have Debian Squeeze with Gnome "sensors-applet" installed.I have a Nvidia 7300GT GPU whose Thermal Monitoring(Temperature) is Shown fine on "nvidia-settings" GUI. But ,Sensors Applet in Debian shows only CPU temp and if I install hddtemp,it will show hard disk temperatures.

I ended up rebuilding the package from debian source enabling nvidia support.and it worked(with "DEB_BUILD_OPTIONS="--enable-gui --with-nvidia" Has Any Work Around to show nvidia GPU temperature without rebuilding the package ?PS:Below is a screenshot of nvidia GPU temperature showing in the top panel(of Gnome). sensors-applet_nvidia.png (5.5 KiB) Viewed 518 times

View 1 Replies View Related

Debian :: Bug-reporting Tool In Gnome To No Avail So Far?

Jan 8, 2011

I've tried the bug-reporting tool in Gnome to no avail so far. This isn't a huge problem, more a cosmetic one. I'm running Squeeze beta 2, which was a fresh install. I have a Maxtor USB portable HD, which I use to back up personal data. It auto-mounts fine, as soon as I connect it. I have full read-write access from my regular user account; but when I'm finished accessing it, when I right-click and select "Safely remove" I get an error every time. The error has to do with "unable to unmount . . . ." and I wish I had the exact text but I don't. Anyway, when I open a terminal and check the mount point, the drive *has* unmounted, so I'm not worried about data loss. But why the error? BTW, the drive is formatted as one partition with NTFS.

I'm not looking for an answer so much as I am just trying to see that someone involved in trying to get Squeeze ready to release hears about this. It's no big deal, but it looks bad.

View 1 Replies View Related

Debian :: Incorrect Load Average Reporting In Top?

Jun 10, 2011

installed squeeze, but top keeps reporting 0.00 most of the time, and def it's wrong cause we have another server same hardware but lenny, and its over 2.00 same load. what can i check or do to fix this? thx

Linux 2.6.32-5-amd64 #1 SMP Wed May 18 23:13:22 UTC 2011 x86_64 GNU/Linux

[Code]...

View 12 Replies View Related

Debian :: Aptitude Reporting More Than 30000 Dependencies

Mar 16, 2011

I've installed Debian6 Testing KDE4 using a net-inst CD when it is recently released. Today , I did a aptitude clean && aptitude update && aptitude upgrade and got a weird output.
aptitude clean && aptitude update
...
...
Current status: 62 updates [+61], 1561 new [+270].
There are 7 newly obsolete packages: librasqal2, libwpd8c2a, libwpg-0.1-1, libwps-0.1-1, openoffice.org-base-core, openoffice.org-core, openoffice.org-report-builder-bin
aptitude upgrade
Resolving dependencies...
open: 42543; closed: 32760; defer: 49; conflict: 8
The open/closed figures is still running (higher) after 10 minutes.
Believe I am not the only one using Debian Testing with KDE4.

View 6 Replies View Related

Debian Multimedia :: Preferred Method Spam Reporting?

Jun 15, 2009

Which method of spam reporting do the moderators prefer?

Using the spam reporting thread? Using the "Report this post" button? Or both?

View 5 Replies View Related

Debian Installation :: Lenny In OpenSolaris - Reporting 520T Drive?

Mar 18, 2011

I am attempting to get Debian Lenny 5.0.8 to run on an OpenSolaris snv_134 lx-branded zone. Debian 6.0.0 is a total flop due to the included udev requiring a kernel >= 2.6.26 and the kernel provided by the lx26 brand being only 2.6.18.So I installed Debian 5.0.8 into a VirtualBox VM, configured it, then tarred up the install with the following command as root, from /:

tar -cjf /mnt/share/debian-5.0.8.tar.bz2 --exclude dev --exclude sys --exclude mnt --exclude proc *

I then installed that archive into a solaris zone, booted it, and had to run

perl -pi -e "s,1 1,1 0," /etc/fstab

in order to fix up the fstab. Now it boots (with a handful of warnings), but the problem I'm having is that I can't run apt. I get:

E: Couldn't determine free space in /var/cache/apt/archives/ - statvfs (75 Value too large for defined data type)

View 2 Replies View Related

Server :: Df Reporting 100% But Du Reporting 20%?

Apr 15, 2011

Today morning I logged on to one of our servers (through ssh -X) to perform a routine maintenance. When I tried to open a GUI application, it failed to connect to the X server of the workstation. Eventually I ended up issuing the command

Code:

df -h /

and shockingly it showed that / is 100% used. I checked / using

Code:

du --max-depth=1 -xh /

to check the sizes of the individual directories, which showed that only about 18% of the / is used and that confused me badly. There was no quick solutions when I googled around; but luckily I found the following link which nicely explained the issue I had:

[URL]


All I did was found out the services responsible for those unreleased files (using lsof +L1) and restarted them. That is it. Now df reports only 18% of the disk is used and all my X things started working again, thanks to Walker.

View 1 Replies View Related

Debian :: CPU Temperature Monitoring Question On Athlon II X2 250?

Sep 24, 2010

So i hava a ASUS M3N78-VM mobo and recently i got a Athlon II 250 CPU tp replace my aging Athlon 3200+. I installed the BIOS update 1407 that includes support for this CPU. I have Debian Squeeze installed.

I have installed the 2.6.35 kernel from experimental and this has the k10temp module that is made for the k10 series AMD CPUs (Athlon II etc). But there is also the atk0110 ACPI module that gets sensor readings fom voltages, MB and CPU temps from the motherboard (i think so). The issue is this: if i run sensors i get this:

Code:
# sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.07 V (min = +0.80 V, max = +1.80 V)

[Code]...

Notice the difference between the 2 module's reported temperature for the CPU (34 C vs 19.2 C). I rebooted the computer and entered the BIOS - it has shown the values shown by the acpi sensor (it increased rapidly to 38-39 but gone back to 34-35 after i loaded the OS). Does this mean that the k10temp module reports erroneous temperature or that everybody else (BIOS + ACPI sensor) is wrong and i have an ice cool CPU?

View 1 Replies View Related

Red Hat :: File Size Varies With Same 'ls -lh' Command Ran On Two Different Versions?

Oct 22, 2010

I ran ls -lh for same tar ball file on RHEL 3 and RHEL 5.3 box. The sixth column of ls -lh output threw 6.3G on RHEL 5.3 box and 16E on RHEL 3 box. Both the machines have ext3 file system.

Find below the output for RHEL 3 and RHEL 5.3 respectively :

2.0T -rwxr-xr-x 1 root root 16E Oct 20 10:34 bac.tar.bz2
6.3G -rwxrwSrwx 1 root root 6.3G Oct 20 10:34 bac.tar.bz2

Do we know how 'ls ' deals with larger numbers ?

View 6 Replies View Related

Debian :: News Item On FireFox Security - Allowing For Alarmist Reporting

Feb 19, 2010

According to this article -- [URL] there are problems with FireFox security, as a veriety of Zeus is being used by crackers in Europe and China. Allowing for alarmist reporting, this still looks unpleasant. Does anyone have definitive information about how this attack affects the various operating systems?

View 8 Replies View Related

Debian Hardware :: Laptop Shutting Down (unrelated To CPU Temperature)

Mar 27, 2015

My laptop is frequently shutting down while using Google Earth 7.1.2.2041-r0. It uses 100% CPU, but only on one CPU core, and the problem happens at random.

I don't believe it is related to the CPU temperature, because I created a script that saves the current temperature every two seconds, so when the system shuts down I can see the last, and the highest I got from all the times was 62 °C, while the average from all the times it shut down was 57 °C from /sys/devices/platform/coretemp.0/hwmon/hwmon1/temp*_input and 51 °C from /sys/devices/virtual/thermal/thermal_zone0/temp and /sys/devices/virtual/hwmon/hwmon0/temp1_input. From my research, I understand that coretemp-0 is the temperature of the CPU itself, while the others (acpitz-virtual-0) are from underneath the base of the CPU.

The files under /sys and the command `sensors' tell me that only 80° would trigger a shutdown. I bought this laptop in 2013, and I have never seen it go beyond 6-°C:

Code: Select allsensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +41.0°C  (crit = +104.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +48.0°C  (high = +80.0°C, crit = +90.0°C)
Core 2:       +47.0°C  (high = +80.0°C, crit = +90.0°C)

I have done a simple stress test by running `cat /dev/zero >/dev/null' on 8 terminals, together with `glxgears' and `supertuxkart' for half an hour, and my system did not shutdown, neither the temperature went beyond 6-°C. The HD temperature lives around 42 °C, according to `sudo smartctl -l scttemp /dev/sda'.

The output from `inxi -F':

Code: Select allSystem:    Host: localhost Kernel: 3.15.10-zen-686-pae i686 (32 bit) Desktop: Xfce 4.10.2
           Distro: Debian GNU/Linux 7.6
Machine:   System: Evolute (portable) product: SFX-65
           Mobo: Evolute model: SFX-65 Bios: American Megatrends v: 1.07.007 Test Only date: 04/12/2011
CPU:       Dual core Intel Core i3 M 370 (-HT-MCP-) cache: 3072 KB
           clock speeds: max: 2394 MHz 1: 2394 MHz 2: 1862 MHz 3: 1729 MHz 4: 1995 MHz

[Code] .....

View 14 Replies View Related

Hardware :: Disks Speed Varies When They Have Same Amount Of Data?

Oct 30, 2010

My machine has 4 SATA 2 West Digital 1TB disks. I made 2 partitions on each of them, 500GB for each partition. When I started using them I check their I/O using iozone. The first partition has 100MB/s for read, 70MB/s for write. And the second partition has 80MB/s for read, 55MB/s for write. All 4 disks has the same result.

As I use on, the I/O speed on each partition decrease, to different extend. For example, for the 4 first partitions, the write speed varies from 69MB/s to 56MB/s. And I have same amount of data on each of them, all used 11%.

My guess for this is the disk block allocation policy. This is caused because some disk starts writing from inner location while others writes on the outer edge, even though amount of data on each disk is the same.

View 3 Replies View Related

Debian Hardware :: Intel Core I3-330m High Temperature?

Jun 10, 2011

On my lenovo g560 i have Intel core i3-330m, i have both debian squeeze and windows 7 installed on my laptop.Today i noticed that while playing music (amarok) and playing a flash game (google chrome, game - tetris, lol (: ) the processor core temperature was around 70-71deg celsius.I restarted and booted windows 7, doing the same thing (music and tetris) the processor temperature is aournd 54-55deg celsius.Can anyone explain why the high temperature when running debian?

View 6 Replies View Related

Fedora Networking :: Wireless Connection Velocity Varies From Normal To Slow

May 29, 2010

I'm having problems with my wireless. It connects without any problem, but it is very slow. Actually I have the impression that the connection velocity is varies from normal to very slow, however the average connection velocity is very slow. I have been looking up the forums for more the one month with any success. I have tried to install the compac-wireless drivers and the kmod-wl with many different network setups. For sure it is not a problem with my home network, since it works fine with my other old notebook running fedora 11 or when I boot in the windows.

My system configuration is:
- sony vaio VPCCW23FX
- card: Atheros AR9285
- driver: ath9k
- operating system: fedora 12 - kernel 2.6.32.12-115.fc12.x86_64

View 2 Replies View Related

General :: Load The Local .csv File Into Mysql Server The Date Format Varies?

May 25, 2010

When i load the local .csv file into mysql server the date format varies.Its mis matching.How to solve and match this.

View 1 Replies View Related

Debian :: Kernel Keeps Reporting A Printk Bug In Syslog Recent Printk Recursion

Mar 5, 2010

I've got a VPS node running 2.6.26-2-openvz-amd64 and several guest machines. My kernel keeps reporting a printk bug in syslog:

[Code].....

This is somehow being replicated on the guests machines. I've read that printk is a kernel function that prints out a message, during bootup Has anyone experienced similar problem or have a more experience with this? Does it have negative impact to the host performance?

View 1 Replies View Related

Debian Multimedia :: Changing "temperature" Of Screen?

May 19, 2010

Has anyone heard of a program called f.lux? Home page is here:[URL]The idea is that "it makes the color of your computer's display adapt to the time of day, warm at night and like sunlight during the day." So late at night it doesn't strain your eyes too much and doesn't deceive your brain into staying up too late.Is there any kind of OSS equivalent to this, as it seems a binary-only offering. Does Debian have anything remotely similar?

View 1 Replies View Related

Debian Configuration :: ProFTPd Configuration - Use To Host MySQL Databases And A Few Websites

Nov 18, 2010

I am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".

It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.

View 6 Replies View Related

Debian Configuration :: Multipath Configuration On 5.0 64 Bit - Doesn't Create The Relative Devices

Jul 20, 2011

i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard

Here is the multipath.conf

[Code]....

So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun

View 1 Replies View Related

Debian Configuration :: Reboot Both The Server And The Client Machines Every Time Change The SAMBA Configuration?

Apr 5, 2010

I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.

My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.

View 1 Replies View Related

Debian Configuration :: Fstab Configuration - Failed To Open /proc/filesystems: No Such File Or Directory

Aug 23, 2011

I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail  or so Failed to open /proc/filesystems: No such file or directory

[Code]..

View 14 Replies View Related

Debian Configuration :: Fstab Configuration And Timeout - Automatically Continues Booting Even If The Hard Drives Are Not Attached?

Aug 3, 2011

I have a PC104 running debian. I have 3 hard drives (in addition to the one booting) mounted in fstab by UUID. I use the options defaults,error=remount-ro. However, this means that when I boot with the hard drives not attached, I have to press Ctrl-D to bypass when the boot discovers the drives are missing. Is there a timeout commandoption I can add to fstab so that it automatically continues booting even if the hard drives are not attached? I could not find anything on a timeout command. (I tried adding timeout=1000 but no-random guess)

View 5 Replies View Related

Debian Configuration :: Boot Via PXE, "no Default Or Ui Configuration Directive?

Mar 19, 2011

A week ago I opened this thread viewtopic.php?f=17&t=61580 in "Board index ‹ Help ‹ Installation" and asked for a moderator to move this to here. Because it hasnt happened up to know, I am reopening the thread here. It would be reeeeally great if somebody could help me with my problem!

I own two computers, one netbook and one laptop. I want to boot my netbook as a diskless client via PXE.I set up a dhcp-, tftp and nfs-server on my laptop but when i boot my netbook, the follwoing messages are displayed:(to make it more clear, i uploaded the whole output and shortened the output below)

[Code]...

View 1 Replies View Related

Debian Configuration :: No Longer Allowed To Access The System Configuration

Jul 31, 2011

I am using Squessze and Gnome. When I try to use the gui System>Administration>Network or Users and Groups I get the error The configuration could not be loaded. You are not allowed to access the system configuration.Everything was working before. I read around a bit. In some cases,it was caused by mismatching group and password files after using the gui. I do not know how to check if they are matching. Of course I do not know for sure that is the problem in my case.

View 14 Replies View Related

Debian Configuration :: Coding The Apache2 Charset Configuration?

Mar 5, 2010

I use apache2 with virtual host and I 've a solution of Webftp who run on it. This solution send automatically email when a new client register himself. In the header of the mail I look this "Content-type: text/html". But when I look this mail with Outlook 2007 the accents are bad coding.It's a script who generate this Html content email.

View 1 Replies View Related

Debian Configuration :: Exim4 Configuration For Local Addresses

Jun 17, 2010

I am working on a Debian 2.6.26-19 Distribution with exim4 as MTA. After a system restart a problem occurred with delivering emails to local addresses. These local addresses use a 1and1 mailserver for email. The MX records for the local domain are set correctly but exim does not use a DNS lookup for these addresses because it identifies them as local addresses. I figured this out by executing the exim4 -d -bt command. The dns lookup part of the result looks like this (I replaced the actual address with placeholders):

[Code]....

The eventual result of the exim4 -d -bt command is: [user]@[domain.ext] is undeliverable: Unrouteable address How can I make sure, that exim4 makes a DNS lookup for the local addresses instead of skipping it? I know that I have to edit a exim4 configuration file, but I could not figure out which and how.

View 1 Replies View Related

Debian Configuration :: Squeeze D-u - Kernel Configuration Skipped

Jul 6, 2010

I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.

I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.

I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.

So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.

However, just in case someone else runs into this:

1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.

2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)

View 14 Replies View Related

Debian Configuration :: Get The Windows One Working Again - Grub Configuration

Oct 3, 2010

I was trying to get the Windows one working again. Here's what fdisk -l reads:

[Code]...

I'll change these or do some grub configurations, if anyone knows what ones can work.

View 1 Replies View Related

Debian Configuration :: Saving Configuration And Packagelist For Reuse?

Nov 14, 2010

I have problems with the system harddrive. I would like to install my Debian on to a new HDD with the same configuration and packages. How do I get the configuration to the new Debian. What files/directory do I need to copy? How do install the same packages?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved