Debian Hardware :: Slow Resume From Suspend On Acer Laptop?

Jan 5, 2011

My Acer Aspire 7552 laptop is running Debian Testing (just the main repos, no contrib or non-free). For some reason, it takes over five minutes to resume from suspend, and an absurd period to come back from hibernate (well over half an hour). Has anyone encountered this problem before, or have any tips on how to fix it? For the time being, I'm completely powering off every time I close my laptop because it's faster that way.

Output of lspci in case it helps:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)

[code]...

View 1 Replies


ADVERTISEMENT

Debian Configuration :: Laptop Does Not Resume From Suspend?

Jan 27, 2011

I have installed squeeze on a HP notebook. I have one small problem though.It does not resume from suspend. If I shutdown -> suspend, or close the the lid, or shut downs (suspends) as expected, but whenower it backup up, the screen just stays black.Hibernate is working fine.

output of lspci (if needed)
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)

[code]...

View 14 Replies View Related

Debian Multimedia :: Laptop Screen Stays Black On Resume From Suspend?

Jun 22, 2011

I'm running Debian Squeeze on a Dell Studio 1558 laptop, and I have my laptop set to suspend when my lid is closed. Resuming from suspend seems to work but the screen remains blank, forcing me to hard reboot every time. Upon reading this thread:

Tue Jun 21 23:07:12 AKDT 2011: performing suspend
Tue Jun 21 23:07:28 AKDT 2011: Awake.
Tue Jun 21 23:07:28 AKDT 2011: Running hooks for resume

[code]...

View 8 Replies View Related

Ubuntu :: Laptop Will Not Resume After Suspend

Apr 22, 2010

Whatever way I suspend my laptop (menu, keyboard shortcut, close lid), it seems to suspend just find (no panic lights, suspend LED indicator flashing as expected). However, when i try to resume, the laptop seems to begin the proper wakeup process (for example, the DVD-drive is tested), there's a lot of HDD activity for about 5 seconds, screen does not power on, and then the laptop just shuts off.

System setup:
lucid beta 2, fully updated (just check now)
LG E-500 laptop /w nvidia gforce mobile 8400G
bios version 1.17 from June 2007 (not sure this is important)

Things I tried:
* Completely remove anything to do with gpu drivers and installed nvidia-current driver.
* Suspend stress test described here. this didn't work at all. The first test failed (with ac adapter attached) and the second test suspended but didn't automatically resume (see "the behavior" above). Also, when I booted up again, no apport bug report is created. I tried both with rtc set to utc=yes and utc=no. with utc=yes, the second test did automatically resume, but the same problem happened (laptop shutdown while resuming).
* The debugging steps described here, but I couldn't get the "no_console_suspend" option to work. I tried adding both "no_console_suspend" and "no_console_suspend=1" (without quotes) to the boot script in the grub menu, but when I did pm-suspend in tty1, the laptop really did suspend. I would like to try to do this again if someone could explain how to add this option.

Notes:
* Not sure this is relevant, but when I boot up after a failed resume attempt, wireless network is disabled (this only happens after a failed resume!!!).
* I found a package called nvram-wakeup in synaptic that seems to be related to this. This package is not installed. Should I install it?
In case this is relevant, forgot to mention I'm running ubuntu in dual-boot along side windows7.

View 6 Replies View Related

Ubuntu Multimedia :: No Audio After Suspend And Resume On Laptop?

Jan 2, 2010

I just upgraded to 9.10 (Karmic Koala) on a Dell laptop. Now when I close the laptop lid to suspend and then open it to resume, the audio disappears; have to reboot to get the audio back. I remember having this problem a while ago back on Hardy Heron and finding a kludge to fix it - a line inserted in a shell script that gets invoked on resume

View 9 Replies View Related

Ubuntu :: Laptop Fails To Resume From Suspend To RAM Intermittently

Jul 9, 2010

I have recently updated my Ubuntu 9.10 install to Ubuntu 10.04 and the default kernel to 2.6.32-23 on my Acer Aspire 5738z laptop with 3 GB RAM and Intel GMA 4500m graphics card.

My problem is sometimes the laptop fails to resume after being Suspended to RAM. The problem is not consistent. Most of the time the system resumes properly but then some times it doesn't . It even doesn't respond to the Magic Keys. I am left with no other alternative but to keep the power button pressed till the laptop shuts down.

View 2 Replies View Related

General :: Laptop Screen Stays Black On Resume From Suspend?

Jun 22, 2011

I'm running Debian Squeeze on a Dell Studio 1558 laptop, and I have my laptop set to suspend when my lid is closed. Resuming from suspend seems to work but the screen remains blank, forcing me to hard reboot every time. Upon reading this thread

Code:
Tue Jun 21 23:07:12 AKDT 2011: performing suspend
Tue Jun 21 23:07:28 AKDT 2011: Awake.

[code]...

View 1 Replies View Related

Debian :: Suspend To Ram - Resume Bug In Squeeze?

Mar 10, 2010

I have an issue with my Sony vaio fw31e not resuming from suspend. Reported this as a bug: [URL] The usual ways of suspending, from the kde 4 menu, from the power/battery widget or by lid closing always result in no resume. However, running pm-suspend from a root terminal suspends and resumes just fine. My question is, how does one delve into the way that the usual methods initiate suspend? Maybe if I could find out what each of these methods actually does, I may be able to see what is going wrong? I had been running squeeze on this lappy since July 2009 with no suspend issues until an update broke it sometime in January. The install is being fully upgraded every day at the moment.

View 11 Replies View Related

Debian :: 8.0 Jessie Xfce Can't Resume From Suspend

Oct 9, 2015

I have a quite simple installation of Debian 8 Jessie XFCE and the resume from suspend is not working 9 out of 10 times. The system is single booted if that matters. I have found a few solutions to this problem but they were not suitable to my case as I don't have an Nvidia GPU but only Intel Onboard:

Code: Select all# lspci -v
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)
   Subsystem: Hewlett-Packard Company Device 2818
   Flags: bus master, fast devsel, latency 0
   Capabilities: [e0] Vendor Specific Information: Len=0b <?>
   Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
   Subsystem: Hewlett-Packard Company Device 2818
 
[CODE]..

When I try to resume, I can hear the system booting but I can't see anything on the screen and the keyboard is not working either (no light on Num Lock and Caps Lock). The only option is to press the power button for a few seconds to stop the machine and then push again to start booting again.

View 13 Replies View Related

Debian :: Blank Screen Upon Resume From Suspend?

Jan 28, 2010

Up until a couple days ago, my computer had no problems suspending to ram. However, now when I suspend, and later hit a key on the keyboard (usually space) to resume, all I see is an illuminated black screen. I can't even open a tty via Ctrl+Alt+F1. I can however ssh into the machine.he only possibility I can think of is that I am no longer running kdm. I just use "startx" to star an openbox-session.

View 8 Replies View Related

Debian Configuration :: No WiFi On Resume From Suspend Broadcom 43x?

Jan 10, 2011

I have just joined the Debian community, for the past 2 years I have been using Linux Mint (ubuntu), I am now using Linux Mint Debian 64. I have a Lenovo A700 ideacentre with a Broadcom 4313 WiFi card. I manage to get the card working, now I have a new problem. If I suspend the machine the WiFi will not connect on resume. Is there a simple command I can use to getting the connection restarted, or better yet a work around so it will restart on its own?

View 14 Replies View Related

Debian Configuration :: Resume After Suspend Fails With Kernel 2.6.36

Aug 27, 2011

I'm having problems with resume after suspend to RAM. The machine starts to wake up, but the screens (multi mon VGA and DVI setup) are black and the keyboard doesn't light up. After ~20 seconds there's some brief disk activity and then the computer reboots. 100% repeatable with affected kernel versions. My test method is simple, I boot the machine on the kernel's recovery option, log on as root and run "PM_DEBUG=1 pm-suspend". I haven't found anything in the logs after a failed resume.

Here's the situation:
I have a SSD disk. To get TRIM support I have to use kernel 2.6.33 or later, which means that the standard kernel in Squeeze is too old.I have Nvidia graphics, and there was a change in 2.6.34 that breaks older versions of xserver-xorg-video-nouveau (version 0.0.15, used in Squeeze), I can't use Debian Squeeze with a kernel newer than 2.6.33.x.My machine (XFX GeForce 9300 motherboard) won't resume from suspend to RAM if I use a kernel newer than 2.6.36. There are no BIOS updates available.

My options:
Install newer kernel from Squeeze backports (2.6.38.2 last time I tried). <--- Not doable b/c of resume problems. Upgrade to Wheezy, which uses kernel 3.0.x. <--- Not doable b/c of resume problems.Compile a vanilla kernel. So basically I'm forced to compile my own vanilla kernel, 2.6.33.x on Squeeze or 2.6.35.x on Wheezy. I won't be stuck with an unsupported kernel version in the near future, but so far I've failed miserably.

I know that the latest kernel version where everything works is 2.6.36.x (no longer maintained), 2.6.37.0 and later cause resume problems (I've tried 2.6.37, 38, 39 and 3.0.0, .0.1). I've tried doing a git bisect on the kernel, but didn't succeed, ended up on 2.6.36-rc5 which is weird considering that 2.6.36.4 works. There may be several suspend/resume bugs in different kernel versions that messed up the bisecting results.

View 2 Replies View Related

Debian Configuration :: 8.1 - Keyboard Doesn't Work On Resume From Suspend

Jun 19, 2015

I'm running Debian 8.1 KDE on a 2007 dv6 laptop. Model number is worn off. lol but the specs:

Intel i3 first gen m 330
4GB RAM
Intel (ironlake) graphics

First off, closing the lid to my laptop doesn't trigger suspend, or anything no matter what I set it to in power options.

I can suspend using "systemctl" or suspend from the "Leave" menu, but upon turning my computer back on, my touchpad and keyboard don't work.

Sometimes, my touchpad will start working after about 15 seconds, but the keyboard doesn't come back. I have to hard reset.

I have a feeling it's something to do with systemd, but I'm not super proficient in linux. Just an end user who is friendly with a terminal.

View 6 Replies View Related

Debian Configuration :: System Upgrade => No Network After Suspend And Resume?

Aug 7, 2011

Lately I upraded my Debian using aptitude update/aptitude upgrade - including installing a new kernel (3.0). Since this upgrade I have strange problem with networking. When I suspend my computer and resume it, I do not have connectivity with network:

$ ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
From 192.168.1.1 icmp_seq=1 Destination Host Unreachable

[code]....

View 2 Replies View Related

Debian Installation :: Suspend / Resume / Restore Services Under Systemd On Jessie

May 11, 2015

Fixing my chronic suspend/resume problems turned out to be easier under systemd, but like everything else lacks documentation.

To suspend rather than power off when pressing the power button, I edited /etc/systemd/login.conf

uncommenting this line and changing it to suspend:
HandlePowerKey=suspend

and uncommenting the line
HandleLidSwitch=suspend

Some services were lost on resume. This problem seems common. To run a command on resume, I believe you have to make your own script, and create a systemd file to run it.

My script is /home/james/.bin/james-resume.service, which contains:

#! /bin/sh
/sbin/hdparm -B 255 /dev/sda

This must be executable. Ownership doesn't seem to matter.

To run it, I made a file in /etc/systemd/systen/suspend.target.wants
The file name must match the script name:
/etc/systemd/system/suspend.target.wants/james-resume.service

This contains:

[Unit]
Description=Run James jobs at resume
After=suspend.target
After=hibernate.target
After=hybrid-sleep.target

[Service]
ExecStart=/bin/bash /home/james/.bin/james-resume.service
[Install]
WantedBy=suspend.target
WantedBy=hibernate.target
WantedBy=hybrid-sleep.target

Ownership must be root.root. Apparently it doesn't need to be executable.

Then enable with:
sudo systemctl enable james-resume.service

and check with:
sudo systemctl status james-resume.service

If it says the service is loaded, it's OK -- inactive only means it's done running.

View 7 Replies View Related

Debian Configuration :: Squeeze: Suspend/hibernate Resume Fails With Radeon Graphics

Aug 6, 2010

I am running Squeeze on an older Compaq EVO laptop with radeon graphics.

A few months ago, after an upgrade, suspend and hibernate stopped working. The suspend or hibernate worked fine, but the resume just hung with a black screen. I finally got around to looking into it and found a workaround.

The workaround is to disable Kernel Mode Setting for the radeon. This can be done by adding the boot parameter "radeon.modeset=0" or by editing /etc/modprobe.d/radeon-kms.conf so that it includes the line "options radeon modeset=0".

If you are interested in the details, you can search for problem reports related to radeon kernel mode setting.

View 3 Replies View Related

Debian :: Laptop Freezes When Going Into Suspend

Sep 30, 2015

I'm running stock Debian 8.2 with GNOME DE on an Acer ES1-512 series laptop. Whenever I attempt to go into suspend, either by closing the laptop lid or holding ALT when clicking the power button in the top-left system menu on the desktop, my laptop briefly flashes the default GNOME lock screen, fades to black, and then hangs there. Usually, when my laptop would actually suspend, the power indicator light would change from blue to orange and slowly fade in and out. However, now it just sits on blue. There is no way to re-awaken the laptop from this state, and I have to force shutdown by holding the power button.

Running Code: Select allgrep -i error /var/log/messages gives me:

Code: Select allSep 28 17:59:57 debian gnome-session[1188]: [1504:1536:0928/175957:ERROR:mcs_client.cc(752)] Received close command, resetting connection.
Sep 28 18:17:50 debian gnome-session[1188]: [1504:1536:0928/181750:ERROR:mcs_client.cc(752)] Received close command, resetting connection.
Sep 28 21:27:52 debian gnome-session[1188]: [1504:1536:0928/212752:ERROR:channel.cc(307)] RawChannel read error (connection broken)
Sep 29 14:21:51 debian gnome-session[1188]: [1504:1536:0929/142151:ERROR:mcs_client.cc(752)] Received close command, resetting connection.

[code]....

View 1 Replies View Related

Debian :: Laptop Doesn't Awake From Suspend

Sep 2, 2015

I have installed Debian a few days ago and when I close my laptop, it goes to suspend, everything is ok but when I try to awake the screen remains off.

I am using Asus X51RL laptop (made in 2007) and it is NOT a hardware problem, suspend works fine in Windows.

View 4 Replies View Related

Debian Multimedia :: Laptop Does Not Wake Up From Suspend

Oct 14, 2010

I have an Acer 1551 4755, with Debian Squeeze. Normally my Debian Squeeze installations and suspending work fine on my other 2 laptops. For some reason this one is troubled. I can put into sleep with "pm-suspend" or "pm-hibernate" but the thing is that my laptop never wakes up. I endup restarting.

here is the hardware and module list

[URL]

View 6 Replies View Related

Debian :: Laptop Comes Out Of Suspend But Screen Stays Black?

Dec 14, 2010

I like to suspend my laptop when I close the lid. I have squeeze installed. When I open the laptop lid all lights indicated that it coming out of suspend but the monitor stays black. It is worse since I install the ati drivers for the card instead of the xorg. It did it with both but worse with nonfree drivers. I can get it to come out by ctrl alt f2 and the ctrl alt f7. However yesterday that did not work but that was the first time. My laptop is an acer 5251-1513 amd processor v120, and hd 4250 radeon

View 6 Replies View Related

Debian Hardware :: Laptop Runs Hot When In Suspend Mode

Nov 9, 2014

it is a macbook pro (5,3) running sid.when i am using it, it is cool.however in suspend mode, it gets very hot.i have this running

Code: Select all/etc/init.d/macfanctld status
● macfanctld.service - LSB: Apple MacBook (Pro) fan control daemon
   Loaded: loaded (/etc/init.d/macfanctld)
 
[code]...

View 2 Replies View Related

Debian :: No Wireless Connection With Lenny On Acer Aspire Laptop

Jan 17, 2010

I recently bought a new Acer Aspire and installed Lenny, I can get a wired network/internet connection however not a wireless connection. I use wicd. Bluetooth doesn't work either though I suspect that it might be the same issue.

Don't know if it helps however when I tpye iwconfig I get:
ladb:/home/nigel# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.

View 14 Replies View Related

Ubuntu :: Can't Resume From Suspend?

Apr 6, 2010

My laptop won't resume after it suspends. It works fine under win 7 so it's not the hardware. The light says it's on and it's pretty much a blank screen. I'm not sure whether it's operational but the screen is off. It has exactly the same resault a waiting for the blank screen except it won't go back on.

View 9 Replies View Related

Ubuntu :: 10.04 Log Out When Resume From Suspend?

May 6, 2010

I've just upgraded from 9.10 to 10.04 via the upgrade manager. Prior to the upgrade I was able to suspend and hibernate without any problems. Now that I have upgraded to 10.04, I can suspend however when I resume I am back at the gdm login prompt, logging in again with a new session.Having just done another test whilst writing this, it actually appears that if I select suspend from the top right I am suspended and can resume my session. If I close the lid on my laptop (which is supposed to suspend) I am logged out and suspended.Also, Hibernate doesn't work as well - sometimes it never actually hibernates (just sits on a black screen) and sometimes it doesn't resume (it's never hibernated and resumed correctly since the upgrade)

View 9 Replies View Related

Ubuntu :: Pm-suspend-hybrid / Schedule The Laptop To Come Out Of Suspend?

May 23, 2011

3 questions i have about "pm-suspend-hybrid"

1. is it possible to schedule this command in the same manner as shutdown ? eg sudo shutdown -h 60

2. is it possible to schedule the laptop to come out of suspend ?

3. i have a usb sound card (xfi go). when waking from suspend, the internal sound card is selected. i have to manually select the external sound card & for whatever reason, also unmute it too

View 1 Replies View Related

Debian :: Soft Lockup On Fresh 8.3 Install On Acer Aspire S7-391 Laptop

Feb 11, 2016

Acer Aspire S7-391 laptop, 64 bit install
Previous was Debian 7.6, no issues.

Not doing anything special, just browsing the web and I get a few of these soft lockups. Cannot reboot, have to power it off and on when it happens. USB stops working also.

Code: Select all[ 7002.597774] BUG: soft lockup - CPU#1 stuck for 22s! [khubd:93]
[ 7002.597777] Modules linked in: tun hid_generic hidp rfcomm bnep pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) cfg80211 cpufreq_powersave cpufreq_conservative cpufreq_stats cpufreq_userspace 8812au(O) ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev joydev media x86_pkg_temp_thermal intel_powerclamp intel_rapl acer_wmi sparse_keymap coretemp iTCO_wdt

[Code] ....

lspci output:
Code: Select all00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)

[Code] ....

View 11 Replies View Related

Debian Configuration :: Internet For Acer Extensa 5220 Laptop On Stretch

Jul 20, 2015

I have installed debian stretch on this machine, but can't get wired ethernet running. Using Slitaz live disc, the wired connection works. Guess I am missing a package or two.

Slitaz system (2.6.37) info reports:

Code: Select alltg3:  Broadcom Tigon3 ethernet driver
ath5k : Support for 5xxx series of Atheros 802.11 wireless LAN cards
ath:  Shared library for Atheros wireless LAN cards
mac80211:  IEEE 802.11 subsystem
cfg80211:  wireless configuration support
rfkill:  RF switch support

PCI device list:

Code: Select allEthernet controller:  Broadcom Corporation Netlink BCM5787M Gigabit Ethernet PCI Express
Ethernet controller:  Atheros Communications Inc. AR242x/AR542x Wireless Network Adaptor

Interfaces: lo, dummy0, eth0, wlan0

So it looks to me I need drivers for:

wired interface - Broadcom BCM5787M
wireless interface - Atheros Communications Inc. AR242x/AR542x

The debian scratch I have installed on the laptop gives me this info:

Code: Select alllspci -vvnn | grep -A 9 Network
04:00.0 Ethernet controller [0200]: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
   Subsystem: Quanta Microsystems, Inc Device [1a32:0105]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-

[Code] ....

Output of lsmod:
Code: Select allModule                  Size  Used by
cpufreq_stats          12694  0
cpufreq_powersave      12422  0
binfmt_misc            12733  1
cpufreq_conservative    13872  0

[Code] ...

It looks like the required modules have been loaded, e.g. for wired, tg3

dmesg contains:
Code: Select all[    1.861173] PTP clock support registered
[    1.862488] tg3.c:v3.137 (May 11, 2014)
[    1.892663] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:1d:72:15:e4:4d

[Code] ....

My etc/network/interfaces file is:
Code: Select all# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

[Code] ....

And ifconfig yields:

Code: Select allifconfig
lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:70 errors:0 dropped:0 overruns:0 frame:0
          TX packets:70 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:22264 (21.7 KiB)  TX bytes:22264 (21.7 KiB)

So no eth0. How can I fix this?

View 11 Replies View Related

Debian Configuration :: Jessie 8.0 - Acer 5733 Laptop Freeze After Sleep

Feb 14, 2016

I have Debian Jessie 8 installed on a Acer 5733 Laptop. After I closed the screen, it goes sleeping, and when I open it, aleatory, it freezes. I don't have graphical interface, and the tty are not accessible. Sometimes, I get access to the computer 10 seconds, and then freeze.I have to shutdown the computer...and lose my work I was doing.I thought it was a X-problem, but the tty don't work too, so it's not ? When I restart the computer, it shows Code: Select allclearing orphaned inode <some inode number.

View 0 Replies View Related

Debian Configuration :: Laptop Acer Aspire 4551 Hangs Up On Hibernation?

Oct 14, 2010

I have a laptop Acer Aspire 4551-2194. I've installed Debian Squeeze with XFCE and it works great. I have only one problem. I can go through hibernation / suspend, but when I push the power button, the computer hangs. It doesn't come back and I must reboot it.

View 4 Replies View Related

Fedora :: Suspend / Resume With F14 Radeon Kms?

Nov 13, 2010

It all works if I boot my self compiled vanilla 2.6.35-rc3 though. The environment

Sony vaio VGN-SR21M 4GBRAM P8400, ATI HD3400 mobility. I use

kernel-2.6.35.6-45.fc14.x86_64
xorg-x11-drv-ati.x86_64-6.13.1-0.3.20100705git37b348059.fc14

If I suspend my notebook it starts the usual slow orange blinking indicating the suspend mode got reached. There is also evidence in the various log files that this works. If I try to resume it hangs a for 3 seconds and then I get the hdd-password screen from my bios and the notebook boots from zero. I couldn't find anything in /var/log/messages nor dmesg. If I first boot to windows (grub 2nd partition) and then restart and boot to linux, all the suspend works fine

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved