In Windows I can get my computer to resume from sleep mode by pressing any key on the keyboard. My keyboard is a Logitech G15 (USB).
How can I get this functionality in Ubuntu?
When I suspend my computer and then resume later in the day my USB keyboard locks up. The only way I have found to reset the keyboard is to disconnect the USB cable from the USB port and then reconnect it.
View 9 Replies View RelatedTitle says it all. I close my laptop lid. It goes into suspend mode. I open it up again, the computer powers up... and I see a black blank screen. No key combinations seems to bring anything back.
View 9 Replies View RelatedWhen I resume my system after choosing the "Suspend to RAM" option, the login prompt appears but the keyboard doesn't work at all. (Caps/Num/Scroll don't light up either) The mouse, however, works fine and I'm able to click on the on-screen elements. Since I'm not able to login, I'm forced to reboot and abort the session. Note that this does NOT happen with the "Suspend to Disk" feature. (ie, it works fine).
System Specs:
openSUSE 11.2 KDE4.3 x86_64 (updated)
Sony VAIO VGN-CS17G
I'm running Debian 8.1 KDE on a 2007 dv6 laptop. Model number is worn off. lol but the specs:
Intel i3 first gen m 330
4GB RAM
Intel (ironlake) graphics
First off, closing the lid to my laptop doesn't trigger suspend, or anything no matter what I set it to in power options.
I can suspend using "systemctl" or suspend from the "Leave" menu, but upon turning my computer back on, my touchpad and keyboard don't work.
Sometimes, my touchpad will start working after about 15 seconds, but the keyboard doesn't come back. I have to hard reset.
I have a feeling it's something to do with systemd, but I'm not super proficient in linux. Just an end user who is friendly with a terminal.
My computer have ATI X600 graphics card installed, and I installed CentOS5.3.
Every time I suspend my computer and then resume it, it seem the graphics card can't resume and the monitor says 'no signal', but the system still responses, I can use keyboard.
Is there any configuration I can't do to make it resume normally? I've searched a lot in Google but can't find out any one else run into the same problem.
Information about the card:
Quote:
I was trying to get this feature: wake up my htpc from s3 with my remote control and the solution is to modify /proc/acpi/wakeup and a descriptor in /sys. Here are the details: I'm using a Microsoft IR receiver for MCE remote that appears as dev 2 of bus 2 in lsusb
root@htpc:~# lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 045e:0714 Microsoft Corp.
Bus 001 Device 005: ID 045e:0715 Microsoft Corp.
Bus 001 Device 004: ID 045e:0707 Microsoft Corp. Wireless Laser Mouse 8000
Bus 001 Device 003: ID 045e:070c Microsoft Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub....
That's USB0 I have to enabled, why not usb 1 or 2 (bus 2 in lsusb)? Moreover why are all the disabled/enabled preceded with a star and S4 and not S3 mentioned? Nevertheless that wasn't enough to get it work. I looked in gconf-editor in apps/gnome-power-manager/general but I have no can-suspend or something similar... (I'm running on 10.10, with 10.04 I could suspend only once, afterwards the computer didn't go to suspend, just black screen then login screen). So I looked in /sys/ and found that 'cat /sys/bus/usb/devices/2-1/power/wakeup' (notice the 2.1 as bus 2 device 2 (0,1,...) gave 'disabled' so a echo enabled > /sys/bus/usb/devices/2-1/power/wakeup and now I can wake-up with the remote when I want.
What I don't understand:
Why USB0 in /proc/acpi/wakeup ?
Why have to change in /proc and /sys ?
Is it possible to automate this to get it work even if I change the usb port the receiver is plugged in ?
I'm running Debian Squeeze on a Dell Studio 1558 laptop, and I have my laptop set to suspend when my lid is closed. Resuming from suspend seems to work but the screen remains blank, forcing me to hard reboot every time. Upon reading this thread
Code:
Tue Jun 21 23:07:12 AKDT 2011: performing suspend
Tue Jun 21 23:07:28 AKDT 2011: Awake.
[code]...
I'm about at wit's end trying to figure out how to get Fedora 10 (can't go upgrade past that version, due to no more support for the integrated Radeon S300 graphics) on my HP Media Center desktop to resume after suspend- or to disable suspend, or anything that will prevent the computer from hanging after a period of inactivity. I have tried various combinations of noapm, noacpi, s4_nohwsig, etc., etc.; nothing helped. Actually, noacpi might have helped, I don't know, because disabling ACPI somehow disables internet as well, and I'm not willing to pay that price.I went into the CMOS RAM setup (both before and after updating the BIOS to the latest version), and the only Power options available were "After AC Power Failure," "WOL in S4," and "XD (Execute Disable)."Does anyone perchance know the magical solution to make the problem go away, aside from reverting to Windows?
P.S. The specs:
Dual-Boot XP / Fedora10 with GRUB bootloader
PentiumD 820(S) DC 2.8 GHz (800 MHz FSB, Socket 775)
[code]...
I have a Asus EEE 1000h with ubuntu 9.10 remix. A problem on first asus eee's is the keyboard: also just typed a letter once, the laptop writes it double (every 200 letters more or less). For example it looks like this while writing: "thiss is a ttest" For Windows XP I found a way to fix it: i increased the time, that limits writing letters twice by fast typing. Its not the time "Repeat Keys" Delay (Keyboard Settings "Key presses repeat when key is held down")! In fakt its the opposite: It limits pressing the key to fast. (I hope you understand the problem *g)
View 1 Replies View RelatedMy laptop won't resume after it suspends. It works fine under win 7 so it's not the hardware. The light says it's on and it's pretty much a blank screen. I'm not sure whether it's operational but the screen is off. It has exactly the same resault a waiting for the blank screen except it won't go back on.
View 9 Replies View RelatedI've just upgraded from 9.10 to 10.04 via the upgrade manager. Prior to the upgrade I was able to suspend and hibernate without any problems. Now that I have upgraded to 10.04, I can suspend however when I resume I am back at the gdm login prompt, logging in again with a new session.Having just done another test whilst writing this, it actually appears that if I select suspend from the top right I am suspended and can resume my session. If I close the lid on my laptop (which is supposed to suspend) I am logged out and suspended.Also, Hibernate doesn't work as well - sometimes it never actually hibernates (just sits on a black screen) and sometimes it doesn't resume (it's never hibernated and resumed correctly since the upgrade)
View 9 Replies View RelatedWhatever way I suspend my laptop (menu, keyboard shortcut, close lid), it seems to suspend just find (no panic lights, suspend LED indicator flashing as expected). However, when i try to resume, the laptop seems to begin the proper wakeup process (for example, the DVD-drive is tested), there's a lot of HDD activity for about 5 seconds, screen does not power on, and then the laptop just shuts off.
System setup:
lucid beta 2, fully updated (just check now)
LG E-500 laptop /w nvidia gforce mobile 8400G
bios version 1.17 from June 2007 (not sure this is important)
Things I tried:
* Completely remove anything to do with gpu drivers and installed nvidia-current driver.
* Suspend stress test described here. this didn't work at all. The first test failed (with ac adapter attached) and the second test suspended but didn't automatically resume (see "the behavior" above). Also, when I booted up again, no apport bug report is created. I tried both with rtc set to utc=yes and utc=no. with utc=yes, the second test did automatically resume, but the same problem happened (laptop shutdown while resuming).
* The debugging steps described here, but I couldn't get the "no_console_suspend" option to work. I tried adding both "no_console_suspend" and "no_console_suspend=1" (without quotes) to the boot script in the grub menu, but when I did pm-suspend in tty1, the laptop really did suspend. I would like to try to do this again if someone could explain how to add this option.
Notes:
* Not sure this is relevant, but when I boot up after a failed resume attempt, wireless network is disabled (this only happens after a failed resume!!!).
* I found a package called nvram-wakeup in synaptic that seems to be related to this. This package is not installed. Should I install it?
In case this is relevant, forgot to mention I'm running ubuntu in dual-boot along side windows7.
I don't have any problems with 9.04 at all with suspend & resume just shutdown (wont power off usb saitek keyboard & razer mouse) but i don't care for that I prefer suspend & resume. However trying 9.10 suspend works while resume gets a black screen & locks up. Now on 10.04 it will suspend very fast but will not power up from resume keyboard & usb power is turned off thats what I can't figure out I have checked bios & changes settings after settings & nothing happens. I know in windows everything works but i do not want windows at all I prefer linux (ubuntu). In my asus eee pc 1001p suspend & resume works with both 9.10 & 10.04.
View 7 Replies View RelatedWhen I close my laptop lid (it goes into suspend mode). When I open it again, I can't see anything but a black screen. I have to reset the computer manually to accessUbuntu again.On a related note probably.. for 'some' screensavers, when I click to re-access my desktop, the screensaver freezes, but I can't see the unlock dialogue. I can however still type my password and it will unlock, I just can't see what I'm doing
View 2 Replies View Relatedin kubuntu how can i resume from suspend without password? it annoys the crap out of me i have been looking all over and cant find anything in settings to do this
View 3 Replies View RelatedKarmic 2.6.31-22-generic, Asus M3N78-EM, MCE remote with USB/IR dongle, latest Bios, Bios PM enable and set for suspend S3. IT will suspend but I need to depress case power button for it to resume. I want to use my remote control, I also can not get it to resume from Keyboard/mouse (See Note Below). Only suspend and power button work.
$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]....
Yesterday night everything was normal until I rebooted to Fedora. This morning I switched back to Kubuntu 9.04 and the keyboard had a strange behaviour. Every button needs to be pressed ~2 sec. in order the letter to show up. And that happens in every application (shell, firefox, etc). I tried to upgrade to 9.10 hoping that it will return to defaults but the problem persist. Please help solve this issue, my work is hanging and all the programs I'm using at the moment are installed on my Ubuntu partition.
View 4 Replies View RelatedI just got a Dell Inspiron 1764 and am dual booting it with Win7 and Ubuntu 9.10.Whenever I hibernate or suspend, it goes through everything fine, but then when I resume it just boots to a black screen and I have to do a hard shutdown. Is there a fix for this? I know it's a fairly common issue.
View 1 Replies View RelatedI've got a Thinkpad X31 with ATI M6 Ly card. Since Karmic, and Lucid, I get no suspend/hibernate/resume. If/when I select resume or close the lid, Lucid goes through the suspend cycle, and for approximately half a second it actually seems to go into suspend, then the screen comes back on, black, but definitely on, and absolutely no response to any keyboard input - have to hard-shutdown by holding down the power button. I've read that the problem is with the Ubuntu kernel, and that installing/compiling 2.6.33 fixes the issue, but causes other ones.
View 4 Replies View RelatedI was thinking, is it possible to keep the internet connection on while in suspend mode? i mean that you could maybe use download something, or use something that doesnt use hdd?
View 4 Replies View RelatedI have an issue with my Sony vaio fw31e not resuming from suspend. Reported this as a bug: [URL] The usual ways of suspending, from the kde 4 menu, from the power/battery widget or by lid closing always result in no resume. However, running pm-suspend from a root terminal suspends and resumes just fine. My question is, how does one delve into the way that the usual methods initiate suspend? Maybe if I could find out what each of these methods actually does, I may be able to see what is going wrong? I had been running squeeze on this lappy since July 2009 with no suspend issues until an update broke it sometime in January. The install is being fully upgraded every day at the moment.
View 11 Replies View RelatedIt all works if I boot my self compiled vanilla 2.6.35-rc3 though. The environment
Sony vaio VGN-SR21M 4GBRAM P8400, ATI HD3400 mobility. I use
kernel-2.6.35.6-45.fc14.x86_64
xorg-x11-drv-ati.x86_64-6.13.1-0.3.20100705git37b348059.fc14
If I suspend my notebook it starts the usual slow orange blinking indicating the suspend mode got reached. There is also evidence in the various log files that this works. If I try to resume it hangs a for 3 seconds and then I get the hdd-password screen from my bios and the notebook boots from zero. I couldn't find anything in /var/log/messages nor dmesg. If I first boot to windows (grub 2nd partition) and then restart and boot to linux, all the suspend works fine
how do i disable the screen lock after i wake my computer from suspend? i would prefer to be able to just wake the computer up and have it go right to the desktop, without having to enter a password. i used to use ubuntu until today, and i remember having to run "gconf-editor" and then switching off on "lock_on_suspend" under apps/gnome-power-management from the menu that popped up. i tried to run "gconf-editor" in fedora 15, but that doesn't appear to exist. i've searched around and haven't been able to find an answer, so i'm wondering if anybody knows what to do?
View 3 Replies View RelatedI've upgraded 4 boxes (32- and 64-bit) from Suse 11.1 to 11.2 with no unresolvable issues. Now I'm stuck with my 5th box, a Dell Dimension 8400 desktop box (yes, an old brick, 32-bit). I can suspend to RAM ("suspend") and to disk ("hibernate") fine, but resume seems to fail. In Suse 11.1 I used kpowersave (GUI in the sys tray) to suspend to RAM. For some reason, it couldn't suspend to disk but that didn't bother me. kpowersave relies on the powersaved running.
Note I had upgraded my 11.1 installation to all shiny and new KDE 4.3 stuff, and while KDE 4.3 seems not to use powersaved (and thus kpowersave) all worked fine. Upgrading to 11.2 has removed kpowersave and powersaved. I don't mind switching to another way if only I could find documentation what's being used on KDE 4.3 (and/or Suse 11.2). All I find by googling is that the daemon used is powerdevil, and that I should use a GUI for suspending (this battery monitoring plasma app).
Well, if I do that on this box it simply does -- nothing. So I tried s2ram and a2disk directly:Running s2ram with the --force option works, but the box doesn't resume. Goes on, screen stays blank, mouse and keyboard don't work. s2disk complains about not being able to "stat the resume device file". I gave it the --resume_device /dev/sda6 option, and it hibernated fine. But it doesn't resume. Pressing the power on button just starts Suse anew (and recovers the file system journals, so I assume it thinks it has crashed before).
So I think I have 2 questions:
What the heck does Suse 11.2 use for suspend/hibernate and resume? Is there any how-to available to learn what I need to configure?
Why can't I resume from successful s2ram or s2disk operations? /var/log/pm-suspend-log or pm-powersave-log don't provide any clues.
Laptop 1 is an acer aspire 5570. closing and opening the lid works a few times, after editing acpi_handler.sh, and battery life reporting is ok during this time. then, for no apparent reason, the laptop no longer responds to the lid closing, and no longer seems to be able to read the battery charge state. once this has occurred, the computer will also no longer restart, it tries a few times, with lights flashing and the hd making ugly noises. the only way to extricate the computer from this state is to pull and reinsert the battery.
Laptop 2 is a gateway nv18. suspend/resume with the lid are ok, mostly. the issure here is no display at all in x. but the computer does respond to ctrl-alt-backspace to kill x, with the command prompt returning. still not good. I'm trying a fresh install on the gateway, to see if this was just an installation glitch.
Both laptops performed flawlessly in 13 otherwise.
I've been trying to find an answer to the following problem : whenever my PC is put in Suspend/Hibernate mode, it fails to recover when pushing the power button. This happens both with automatic suspend or manual suspend. I've been reading this problem, and mine is quite similar, but no solution is given.
uname -rmi
2.6.18-194.11.4.el5 x86_64 x86_64
PS: this computer is not connected to Internet, no update possible.
I have a dual core with an Intel integrated video HTPC (ubuntu 9.2). The suspend mode works for me and by pressing the power button, it wakes up the computer fine. How could I do the wake up from a keyboard, mouse or even a remote control,Does anyone know or has this issue?
When in sleep, keyboard and mouse seem to be dead, no response at all.
I just upgraded to 9.10 (Karmic Koala) on a Dell laptop. Now when I close the laptop lid to suspend and then open it to resume, the audio disappears; have to reboot to get the audio back. I remember having this problem a while ago back on Hardy Heron and finding a kludge to fix it - a line inserted in a shell script that gets invoked on resume
View 9 Replies View Relatedi just installed ubuntu 9.10 netbook remix on my acer aspireone ao532h netbook, and so far, it's been working beautifully. much better than the windows 7 starter edition that came with the machine. the only problem i've experienced so far had to do with the wireless connection. initially, the connection would drop during certain types of activities (e.g. downloading updates or programs, or even streaming videos videos) and the network manager would freeze so completely that i'd have to hard reboot. that seems to have been fixed by installing wicd (following a suggestion here: http://ubuntuforums.org/showthread.php?t=1135723&page=2), meaning that it hasn't disconnected in the several hours since i've been using it. however, wicd has a different problem: it disconnects after a suspend / resume cycle. this requires a reboot to fix also, as not only does it disconnect, but it looses awareness of the network altogether. obviously, this could be a real headache on a netbook that gets closed and opened frequently.
View 2 Replies View Related