I had to boot into my Windows 7 install on my laptop for the first time in a few months and I noticed that the Windows clock was 4 hours ahead. Windows sync'd its time with the internet, then I booted back into Debian (Lenny) and my clock was now 4 hours behind. Both OS's are set to the same time zone (EDT). The minutes were correct in both systems. Could the fact that EDT is UTC-0400 be relevant?
View 7 RepliesI'm running windows 7 and the F12 Beta (although the same issue existed in my f11 distro) on an asus g71 bb. When ever I boot into windows my time is correct. If I boot into to F12 my time is wrong. Usually by 4 hours. If I change it in Linux when I boot into windows I end up switching the time on my windows partition. I tried searching the forum (rather casual I'll admit) and couldn't find any solutions.
View 10 Replies View RelatedI have Fedora in dual boot with windows on a laptop. I have a weird clock problem. If I get the clock set correctly in Fedora, then it's 4 hours too fast in Windows. When I fix it in Windows and then restart into Fedora, it's 4 hours too slow in Fedora!Why are they competing with each other and how do I get them to both be correct?
View 6 Replies View RelatedI was struggling how to phrase the question (in the subject) so let me clarify... I wish to install Windows 2000 and then do Ubuntu, on the same PC. I never had a dual boot before but I understand that it goes automatically (after a short time) to default Windows if Ubuntu is not chosen (on the boot up screen), correct? If so, if there's a "countdown" of sorts, is there a way to disable it? I wish to have control over that aspect, have unlimited time during that boot "choose one" screen.
View 7 Replies View RelatedI've set-up dual boot on my laptop. Ubuntu installed first, then Windows 7 so it uses Grub2 to control the booting on start-up. I've noticed that my system clock goes out by an hour on both OS's, I change the clock to correct time & on reboot the time is usually (not always straight away) an hour behind. Has anyone else had this problem & know how to fix it?
View 4 Replies View RelatedTrying to adjust my clock settings!I am running KDE 4.4.3 on Squeeze, on an 64bit laptop.(I used the AMD64 net install version)How can I fix the time settings so it shows 5:00pm instead of 17:00:00So far I have not been able to find a cure
View 3 Replies View RelatedWhen I boot into Debian (lenny) my clock is always 4 hours slow. Whether I set it manually, or set it to get it's time from the network, the next time I boot into debian, it's back to being 4 hours slow.
View 14 Replies View RelatedI'll start off with stating my problem and summarize how I got to it.
I installed Windows 10 on an SSD. I installed Debian 8.2 after it. The SSD was/is a GPT disk. I installed both installations from a UEFI booted device (DVD for Windows, and USB drive with Live CD for Debian).
I tested it after each installation making sure I could boot via UEFI into Windows, then Debian, then Windows, to make sure nothing broke.
I rebooted the machine. Suddenly, no more UEFI. Nothing. I didn't change any BIOS/UEFI setup menu settings. Not even my USB drive with Live CD will boot through UEFI anymore. Even when nothing else is plugged into the system.
My situation is actually a bit more complicated than that, but I think that will suffice for now. I can still boot into the Live CD on the USB drive, just in Legacy mode only. I mounted the EFI partition on /mnt/boot after I mounted the file system for Debian on /mnt. It is identical, as far as I can tell, to as it was before when it was working.
My motherboard has CSM and Secure Boot, both have been set up how they need to be to boot UEFI into Debian. Tinkering with them further after things broke did not fix it. I tried all variations of options/settings.
The GRUB Reinstall guide says to be in EFI mode before starting it, so I can't do that.
My motherboard is an ASUS X99 Deluxe, and I've heard ASUS has special "features" (read: bugs) that come with their boards. Searching hasn't brought up any other people with this issue. I believe the firmware is updated to it's most current one.
I've tried dd-ing my backup of my old system, from before trying to migrate to a Dual Boot system, to the SSD (after backing up the dual boot setup with dd -> <name>.img via the Live CD USB). However, that won't boot either as it is a UEFI install as well.
The layout of my EFI partition is as such:
/boot/EFI/Boot/bootx64.efi
/boot/EFI/Microsoft/<Microsoft-naming>.efi
/boot/EFI/debian/grubx64.efi
I've heard that the standards on how that's supposed to be set up isn't a standard. However, since it worked booting into the OS' the first time, I don't see how that could be the issue (a bad hierarchy layout leading to the UEFI not being able to see the OS installs).
I've seen that I can boot to an EFI shell (called Shell.efi, apparently) via an option in my UEFI BIOS setup menu on my motherboard. Is that an option here to somehow bypass this strange issue?
All I can think to try is burn it all and start over. But not knowing what caused it means I could just make it happen again. Plus, I can't boot into UEFI install media, so I can't install UEFI boot OS'. :/
I've recently bought a new computer and installed Windows 7 on it, but left 100GB of space on a separate partition so I could put Debian next to it in dual boot. I have the new Intel i7 950 processor and I run Windows 7 Proffesional 64 bit, so I assumed I had to pick the ia64 debian image. However the CD I burned from the ia64 image didn't boot. (a black screen started and an underscore kept flashing, but nothing else happened)[URL]
I've managed to install i386 Debian on a older intel pentium 4 computer before and that worked fine. I believe I used another application to burn the CD then. This time I've burned the CD with the default Windows CD burn application. I can try burn more CD's but I don't have much left so I want to make sure this is the problem before attempting again. (the burned files on the ia64 CD look exactly the same as the files on the i386 CD, when browsing through the cd files in windows) "If your PC has a 64-bit AMD or Intel processor, you will most likely need the "amd64" images (though "i386" is also fine), the "ia64" images will not work."This seems a bit strange, they recommend me to use the amd64 image if you have a "64-bit AMD or intel processor". I dunno if this is a typo, but it seems weird to me that the AMD-64 Debian version would also work on my Intel machine
I have set up authentication when I am logging from my laptop using windows 7 (putty) into Debian server (see this post [URL].....) but since my laptop is dual boot (Windows 7 and Ubuntu) how would I set up authentication when i am using Ubuntu since from Ubuntu I will be logging into Debian SSH as same user that I am when logging from windows?
View 1 Replies View RelatedI recently installed Debian 7 on a dual boot with Windows Vista. Thus, when I boot the computer, I am prompted by a GRUB screen to select Windows Vista loader, Debian, and Debian (recovery mode). I would like to upgrade Windows Vista to Windows 7. Will this cause an issue with GRUB? Will a Windows 7 loader be added to the list or will a Windows 7 loader replace the Windows Vista loader? Will there have to be a setting change within Debian? Within Windows?
View 6 Replies View RelatedI have a Dell laptop (inspiron 1150) which was dual booting Windows XP and Ubuntu 9.04. I have successfully installed Debian Jessie Standard over the Ubuntu. I pre-partitioned using gparted-live to make a separate single partition for the Debian install. Guided partitioning was then carried out by the installer producing separate /, /home, and swap partitions. After installation, the grub menu shows an entry for Debian and Windows XP. I can boot Debian, but not Windows XP. The symptoms are the same as reported in other forums: A terminal is displayed, vanishes and the system reboots defaulting to the Debian boot.
The grub.cfg file for the Jessie system has an other-os entry:
Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
set root=(hostdisk//dev/sda, msdos2)
search --no-floppy --fs-uuid --set=root cc0ce0ab0ce091ae
drivemap -s (hd0) ${root}
chainloader +1
}
The original Windows entry for the Ubuntu install was:
Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
insmod ntfs
set root=(hd0,2)
search --no-floppy --fs-uuid --set cc0ce0ab0ce091ae
drivemap -s (hd0) ${root}
chainloader +1
}
The partitions produced by partman look OK (during the pre-partitioning I did not touch sda1, sda2, or sda3):
Code: Select all~ # fdisk -l
Disk /dev/sda: 37.3 GiB, 40007761920 bytes, 78140160 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code] .....
Partition table entries are not in disk order.
The os-prober found XP:
Code: Select all~ # os-prober
/dev/sda2:Microsoft Windows XP Home Edition:Windows:chain
So it seems that everything is in place, but there are perhaps important differences in the grub.cfg files. Are the two "set root" commands equivalent for example?
I have Windows 10 and Deb 8 dual boot, and I need to re-install Windows but want to avoid (or at least plan for) losing Grub/Linux boot.
Last time I re-installed Windows after Linux I ended up having to re-install Linux again afterwards as well, because I couldn't recover it (seemingly due to complications from encryption). So this time I'm wanting to plan and avoid that.
CURRENT DISK PARTITIONS:
Code: Select allsda1 | 550M | EFI System
sda2 | 128M | Microsoft reserved
sda3 | 175.8G | Microsoft basic data
sda4 | 286M | Linux filesystem (Boot)
sda5 | 28.2G | Linux filesystem (Root)
sda6 | 91.3G | Linux filesystem (Home)
sda7 | 1.9G | Linux swap
[Code] ....
As there is a "Microsoft Reserved" partition and a separate Microsoft directory within the EFI partition, if I just go ahead and reinstall Windows will it install it's boot loader/image to one of it's own partitions? And NOT affect anything else like Grub and other Linux things?
Logic tells me yes, but there seems to be many issues on the internet about installing Windows after Linux.
My primary concern is whatever happens with Windows or anything to do with dual loading etc, is that Linux will still just boot, or I can get it working again without much hassle.
Why is there a reserved Microsoft partition AND a Microsoft directory in the EFI partition? Which one boots Windows?
Why is there a separate Linux Boot partition AND a Linux directory in the EFI partition? Which one boots Linux? Where is Grub invoked from, is one redundant, etc?
How these work. It is possible I've set them up wrong, or with redundant partitions, but both systems have been booting ok for months.
I've been using Debian for a few years but always on dedicated boxes and/or VMs.
Finally decided to dual boot Debian and Windows on my main Desktop PC.
Installed as I normally would using, however this time using a seperate drive (one for the existing Windows 10 install and the other for Debian), Debian install detects that windows has an EFI partition and sticks an entry in there, which is fair enough, and everything working fine. Then I spent some time configuring all my software and set it all up just the way I like it. I've rebooted Debian a few times to check it's working correctly and it is.
The issue arrives when I reboot and load into Windows 10. It boots fine.
However after a further reboot GRUB no longer loads... and the machine just boots directly into Windows 10.
After doing some further digging into my EFI partition (and reinstalling various times) it would appear that after a reboot Windows 10 deletes the entry GRUB creates in my EFI partition after EVERY reboot.
Done some googling and most people advise turning off 'fast boot' in Windows as it locks certain partitions to facilitate the machine going into hibernation, only to find that it's always been turned off on my machine (I recall due to a driver issue with my graphics card this had to be turned off when I installed Windows 10).
I've found this article on the Ubuntu forums : [URL] .... however I've tried their steps and windows is still doing a hostile takeover of my EFI partion after a reboot!
Any way to stop Windows 10 from interfering with my EFI files after a reboot? (without doing the obvious thing and kill Windows off).
I have used dual boot systems using various versions of windows and Debian for many years and have encountered no problems. However, I have a problem with installing Debian on a EeePC (ASUS PC1201) which uses Winows 7. I can not even get started because I can not understand the information that I have on my hard drive partitions. Windows 7 says that I have the following :
Local Disk(C:) 78.1 GB free of 99.9GB
Local Disk(D:) 49.8 GB free of 83.8.GB
NewVolume(G:) 948 KB of 0.99 GB
Local Disk(F:) 37.9 GB free of 38..0 GB
(Originally the ASUS only had two partitions C: and D: I used Gparted to genetate F: and G:)
gparted-live-0.7.1.5 says that I have the following :-
/dev/sda1 ntfs 992.5 KB
/devf/sda2 ntfs 100.00 GB with 66.09GB unused
/dev/sda3 ntfs 132.88GB with 129.88 GB unused
unallocated 1.00 GB
Debian Squeeze (the net install version) will not install. G was the result of trying to provide some swap space. How do I prepare the hard drive so that Squeeze it will install on F: ?
how to install Debian after Windows is already installed. Could someone give me a brief guide to begin the process of installing Windows? When I installed Debian I already made a partition for windows (in the same hard disk), I hope I did it right.
View 3 Replies View RelatedI've a Lenovo G50-80T with W8.1. I want to install Debian 8.1 in dualbooting mode. I've done this other times without problems. But this time I want encrypt the Linux partition (not the Windows partition). I'll use dm-crypt to do that. I want to know if this way is secure for protect the data on Linux partition or if I need encrypt the entire drive.
View 3 Replies View RelatedI'm currently dual-booting Squeeze & Windows XP on a machine i use frequently.
In my experience on the desktop, i now see no reason to have Windows XP as a boot option, & wanted to try & avoid a full re-installation of Debian in order to remove XP (merging it's partition with / ).
I have a checklist that i put together, but wanted to be sure this was all correct before going forward.
1. Perform full back-up of all data.
2. Boot into Debian, through GUI -
System Tools > Disk Utility
- Select HDD (80GB Hard Disk)
- Select windows partition ( /dev/sda1 )
- Format /dev/sda1 to Ext4 Filsystem
3. Boot Live CD
- Use gParted to extend /dev/sda2 (was 38GB, will extend to 78GB)
4. Remove XP from the boot menu.
( Note: My ~ folder is on the same physical drive as / (same volume), but i actually store all Media on a separate physical drive which is formatted in NTFS. I plan on reinstalling XP using a virtual hard disk, & sharing that with the virtual machine.Here is a screenshot of my Disk Utility - [URL]
me a easy and right answer to this post
View 3 Replies View Relatedis it safe to install a dual boot windows 32bit and a linux 64bit on the same pc?
View 14 Replies View RelatedThis problem goes back to when I first purchased my laptop 4 years ago: Dell Precision M90. It came with Vista, but I wanted Ubuntu on instead. In order to get bluetooth to work, I had to downgrade the firmware. This is all fine and means bluetooth works in XP too. However, now, I have a dual boot with Windows 7 and Squeeze, I use Vista drivers (as Dell don't provide 7 drivers) and this has upgraded the firmware, and broken bluetooth in Squeeze. How can I get bluetooth working in both Squeeze and Windows 7? Could changing the hardware help? If so, what to?
View 2 Replies View RelatedMy computer has two physical hard drives. Up till now, the first hard drive was for Windows XP and Windows 7, the second was used for file storage. I just installed Lucid Lynx on the second drive. The two problems are as follows.
<s>1. When I boot into Windows 7, the clock is set ahead by five hours, even as the time zone remains the same. </s> Terribly sorry. Found the answer in another thread. Should have searched.
2. I have kept the Windows 7 boot loader (choice of 7 or XP) on the first hard drive, and put Ubuntu and grub on the second hard drive. That way, if I want to load Ubuntu, I press F9 for the hp boot menu and select the second hard drive. From there, I would like this to boot straight into Ubuntu. How do I keep the grub boot menu from appearing? Should I just edit grub.cfg, so it has a timeout value of 0?
I am having dual boot system(windows 7 and Fedora 12).When i switch on my system.It show the the timer 3 sec in order to get boot selection window(means window which asks that what to start fedora 12 or windows 7).I want to increase this time from 3 to 10 sec.
[URL]
I have installed Ubuntu 10 alongside with Windows XP. Consequently I need to make a choice at boot time. However, I feel that the system is not waiting very long, maybe 5 seconds or so, before going automatically into Ubuntu. Can that time be increased? If so, where or how?
View 1 Replies View RelatedI'm trying to sync my clock. I think I would like to do this by the "ntpd" daemon running. I think it should start up on boot, but it doesn't.
I have the following in my /var/log/syslog:
Jul 18 23:44:14 neo ntpd[1780]: ntpd 4.2.6p2@1.2194-o Sun Oct 17 13:45:13 UTC 2010 (1)
Jul 18 23:44:14 neo ntpd[1781]: proto: precision = 0.634 usec
Jul 18 23:44:14 neo ntpd[1781]: unable to bind to wildcard address 0.0.0.0 - another process may be running - EXITING
Jul 18 23:44:14 neo ntpdate[1194]: step time server 72.26.125.125 offset -0.505108 sec
Other posts say if ntpd and ntpdate run too close together, they cause one to think the other is locking a resource. It works to type "ntpdate pool.ntp.org" to manually update the clock. My Debian version is squeeze (6.0.2)
It works to start the ntpd daemon manually:
... sudo /etc/init.d/ntp start
... Starting NTP server: ntpd.
I am about to work on getting the workstations on my network here to be connected to the Active Directory on my Windows 2003 server using Likewise Identity Service. of the security requirements is a good time sync, so I am trying to setup my Windows server time server on my CentOS machines. These machines dual boot Windows 7 and CentOS 5.5. I am using the Windows server as a time server and it's getting its time from its CMOS.llowing a microsoft kb article. I removed all the time servers from the CentOS box I am experimenting with and added the IP of my Windows server, it seems to connect ok but theime never gets updated.Oh, and this network has no connection to the internet it's cut off from the world, so sad and lonely and cannot get internet time
View 3 Replies View Relatedwhy, after booting to windows for any length of time that upon rebooting to Fedora the system time is 3 or 4 or 6 hours off? Sure, it is easily fixed with ntpdate but is there a more permanent fix?
View 11 Replies View RelatedI know this might sound stupid, but how do I change the time delay for a dual boot?
View 3 Replies View RelatedI'm running a dual-boot; Lucid and Win XP on a HP Pavillion.My time settings are about 8 hrs off between the two operating systems. If I correct the time in Linux, it will be wrong when I boot in Windows. If I correct it in Windows, it will be wrong again next time I boot into Linux.Besides the obvious solution of removing Windows from my machine (which I'm not ready for), what should I do to fix this?
View 1 Replies View RelatedI downloaded Ubuntu 10.04 and I want to make a dual boot with Windows 7 Ultimate using Windows Boot Manager...
I deleted my last Ubuntu OS (9.10) just because of GRUB