Trying to adjust my clock settings!I am running KDE 4.4.3 on Squeeze, on an 64bit laptop.(I used the AMD64 net install version)How can I fix the time settings so it shows 5:00pm instead of 17:00:00So far I have not been able to find a cure
View 3 RepliesWhen I boot into Debian (lenny) my clock is always 4 hours slow. Whether I set it manually, or set it to get it's time from the network, the next time I boot into debian, it's back to being 4 hours slow.
View 14 Replies View RelatedI had to boot into my Windows 7 install on my laptop for the first time in a few months and I noticed that the Windows clock was 4 hours ahead. Windows sync'd its time with the internet, then I booted back into Debian (Lenny) and my clock was now 4 hours behind. Both OS's are set to the same time zone (EDT). The minutes were correct in both systems. Could the fact that EDT is UTC-0400 be relevant?
View 7 Replies View RelatedWhen I google screenshots of Linux I often see that people have a clock directly on their desktop. How is this done?
I'm running Xfce on a Wheezy vm, but without xfce4-panel, so having a clock/date right on the wallpaper/desktop would be great..I don't want a clock in a window.
I'm using Debian Squeeze. Just noticed that my system time has slipped back an hour and I can't adjust it because even though I give the root password, the buttons remain inactive.I checked a few other apps that need root authorization and found that - System --> Administration --> Network behaves in the same way.
View 8 Replies View RelatedMy clock settings are always keeping out of date, how can I fix this bug? I'm using opensuse 11.2 with Gnome desktop
View 7 Replies View RelatedI have installed debian 8.2 on a mac mini 5.1 using the cinnamon desktop. Where is the bluetooth settings, can't find it anywhere?. Do I have to install additional software for that or?
View 2 Replies View RelatedMy Googling about this said to make sure xfdesktop was running. I have.Changes made to the panel, to startup and session persist.But number of workplaces, wallpaper, font, theme and so on revert to what they were before. These settings are from when I used Xfce before in Ubuntu 8.04. (My /home dir is on its own partition and I like to keep all my config files for apps I have used and might want to again.)I suspect I might need to delete a config file but I'd rather not undo all of the other settings that do work. Which? Or is it something else?
View 6 Replies View RelatedI've got fedora 11 set up to use network time protocol to sync my laptop's date & time when I'm on-line. The question is simple really, I've added a local universality's time server (what is public) and it's live. but it's added to the end of the default time servers what come with fedora. How do I get fedora to just use the local time server, is it a case of removing the default time servers for fedora, but there is a box what says advanced options which are. sync system clock before starting service ???? & use Local time source (( is that the same as the local ntp server that I've got set up ))Hope some body can help me with the network time protocol part of Date/Time settings.
View 9 Replies View RelatedWhen installing I perhaps mistakingly told Fedora it should use the BIOS clock and now it shows the wrong time, 1 hour ahead of my time-zone GMT+0. If I try and go to the preferences and set the time the 'Advanced Options' one of which I need are grayed out, I need the 'Use local time source' option to be unchecked. Could somebody tell me a workaround or the command-line commands to tell it not to do this anymore?
View 2 Replies View RelatedI have installed the LXDE desktop on my Debian Testing setup (It also has XFCE desktop installed). On the LXDE desktop I am trying to increase the virtual desktops from 2 to 4 desktops but every time I right click on the desktop pager icon on the task bar and then click on Desktop Pager Setting (from the menu that appears), nothing happens I don't get any configuration window for the desktop pager. AM I missing something from my install of LXDE??
View 3 Replies View RelatedI have noticed my system time changes very often. Usually it's only by a minute or two.
If i'm watching date I see things like this :
$ date
Fri Mar 19 12:26:59 EDT 2010
$ date
Fri Mar 19 12:25:23 EDT 2010
$ date
[Code]....
I recently upgraded my clean install Ubuntu Studio 10.10 64bit to Natty 11.04 and whilst everything is working well (except for having no plymouth boot splash - but I'm looking into this) I have noticed that when I log in to the "Ubuntu" desktop (with the Unity launcher and Menu bar in the top panel) I can't seem to change how the time and date is displayed. It seems to be stuck showing 24 hour time only with no date no matter which setting I select in the 'Clock' tab of 'Time & Date Settings' menu.
The clock applet works perfectly when I log into the 'Ubuntu Classic' desktop and I am able to display the date and weather ok.
I have a laptop which I upgraded from Ubuntu 10.10 64bit to 11.04 as well and it doesn't have the same issue.
I thought it might have been a rouge Gconf setting so I dumped my entire gconf using
Code:
gconftool-2 --dump / > ~/Desktop/allgconf.entries
then restarted into recovery and removed my ~/.gconf folder entirely, rebooted again and logged back on. Apart from losing some settings like Evolution and Networking, which I reloaded, and my theme going back to the default theme, the problem still exists.
I have dual boot on my comp. Windows XP and Fedora 11 Now in both systems time zone is set to Belgrade ( which is my time zone), but when I setup clock in fedora to be, let's say 16.15h, then when I swich to windows it says time is 14.15h. When I setup in windows on 16.15h, and I swich to fedora, it says time is 18.15h. So I can't get accurate time on both systems in no way.
View 6 Replies View RelatedBefore my windows clock was at local time + 2h. Now my Win clock is ok but my F11 clock is at local time +2h. What happened?!
View 9 Replies View RelatedBy default, Fedora 11 sets my clock to military time. For example it says 16:22. I would like it to show civilian time (or at least know how to do it) I logged into the clock settings and had to put in the root password, but couldn't find where you do this. If you scroll on the time for hours, it just goes from 0 to 23 and back, not to AM and PM like some others.
View 7 Replies View RelatedI done searches for "clock" and found similar threads, but no real fix that is working for me. My clock resets when I boot into linux. It does not happen in windows or bios even on cold boots. The battery is replaced and good** the old battery was by all measures dead (0.6v), but still seemed to have enough power for the clock, since windows tested fine with it.
I have tryed setting it to local time, UTC.. etc... My timezone is GMT (london). "sudo /sbin/hwclock --systohc" Although I have windows, I do not use it except the few times to test this, so no conflict.
Everytime I reboot Ubuntu,the clock is behind by two hours and needs to be manually set. Is there a way to fix this?
View 6 Replies View RelatedTry as I might I cannot seem to get the system clock to display local time. It looks like it's stuck on GMT. In the System>Administration>Time and Date I have my local time zone set correctly and also set to update automatically with an appropriate time server selected. It still displays my local time +5 hours (I'm central time, USA).
View 6 Replies View RelatedI restored my .kde directory after changing some stuff unrelated to my clock and now all plasma clocks are exactly 5 hours faster than my system time (the correct time).I've set the time zone for Date&Time in System Settings properly and that's working well and I've ALSO gone into the time zone settings for the plasma widgets and switched between UTC and Local manually but that doesn't do anything.
View 7 Replies View RelatedPretty much what the title says. Everytime I reboot Ubuntu,the clock is behind by two hours and needs to be manually set.
View 9 Replies View Relatedim trying to calculate how much time does my program run, use very simple script
clock_t end, start;
start= clock();
int i;
printf("initial %d
",(int)start);
[Code]....
but it outputs 0 all the time. cant figure out where could be the problem.
I want to use a function that able to get the current clock time when I call it from inside my wireless driver?
View 1 Replies View RelatedI'm running windows 7 and the F12 Beta (although the same issue existed in my f11 distro) on an asus g71 bb. When ever I boot into windows my time is correct. If I boot into to F12 my time is wrong. Usually by 4 hours. If I change it in Linux when I boot into windows I end up switching the time on my windows partition. I tried searching the forum (rather casual I'll admit) and couldn't find any solutions.
View 10 Replies View RelatedI'd like to have two gnome clock applets, one with the regular default time and date in the upper right hand corner (the default) and another set to epoch time. However, I can't figure out how to set the second gnome clock applet to display the epoch time. I'm running FC12.
View 4 Replies View RelatedDual boot system. Boot Linux Fedora 13 and the hardware clock is set to GMT. Boot Windows 7, time is wrong, as it expects the hardware clock to be set to the local time. reset the hardware clock each time I reboot in to the other O/S.
View 5 Replies View RelatedI have this problem for a while but didn't notice it until lately(i did reboot the machine for few months). Now that i reboot it frequently i notice that the clock is always not what is supposed to be. I'm in Toronto, Canada so it should be GMT -5:00. Sometimes it shows GMT-6, sometimes -10, now is GMT -11. Anyone would know why i have this issue? I'm running Suse11.1 on a 64 bit. My laptop which runs on 32 bit is working fine.(well probably different versions for kernel and kde.(whatever was in th repository to be updated i updated)
2.6.27.39-0.2-default
Version 4.3.4 (KDE 4.3.4) "release 2"
In Kubuntu 10.10, the clock is set to military time. I shouldn't have to do the math just to look at the clock. There is no setting anywhere to change it to normal time.
View 8 Replies View RelatedI am running Ubuntu 10.04.2 and I've got a problem with the Clock 2.30.2 applet not updating the time.
The only way I can get this to work is after logging on, removing the applet from the panel & the adding it back again. Not really a satisfactory "fix".
I recently noticed that the time displayed in the Gnome Clock applet is exactly (or nearly so) one second behind NTP time.I have a NTP server on my small network to which I sync my other PCs. Some of the applications I run are critical of time and need sub second accuracy - I am also a bit of Time Nut as well.My NTP server is OK. My PCs can sync to my NTP server OK. My applications which require precise time get the right time from NTP - BUT - the time displayed in the GNOME Clock applet is always behind one second!I have spent much time searching for others with similar problems and their solutions but so far nothing - hence my asking here, why do I see this behaviour and what can I do about it
View 2 Replies View Related