Debian Hardware :: Bluetooth Firmware With Windows 7/Squeeze Dual Boot?
Aug 3, 2010
This problem goes back to when I first purchased my laptop 4 years ago: Dell Precision M90. It came with Vista, but I wanted Ubuntu on instead. In order to get bluetooth to work, I had to downgrade the firmware. This is all fine and means bluetooth works in XP too. However, now, I have a dual boot with Windows 7 and Squeeze, I use Vista drivers (as Dell don't provide 7 drivers) and this has upgraded the firmware, and broken bluetooth in Squeeze. How can I get bluetooth working in both Squeeze and Windows 7? Could changing the hardware help? If so, what to?
View 2 Replies
ADVERTISEMENT
May 8, 2010
I've had Windows XP Home installed on my netbook (Toshiba NB205) and I've just tried to install squeeze via net install. In particular, I installed grub. Everything seemed to go ok during the installation, but when I boot up, all that appears is a blank screen with nothing but at "j" and a cursor. One thing I can think of that might offer a clue, is that when asked to installed grub, the installer said it recognized two operating systems: Microsoft Windows XP Home, and Windows NT/XP. The latter is not really an operating system, but the backup partition.
I don't know how this might affect grub's functioning. What does this "j" mean? Looking at this: [URL]. Could this have some thing to do with boot flag? Should I switch it to my NTFS partition instead of my root partition? Doing that at least let's me boot into Windows. But that's not what I want. I've never dual booted before. So I booted back up with my USB, intending to reinstall Debian, and it loaded grub instead. So apparently grub is now on my USB. Then it booted me into Debian.
View 3 Replies
View Related
Jun 7, 2010
I cannot count how many times I have re-installed squeeze, and do all kinds of fixes to grub, but no joy. Every time, there is this ntoskrnl.exe error, and to re-install it. I thought my WIN XP may be corrupted, so I reinstalled it, and updated it with sp3 and all updates. Then I re-installed squeeze (reformatting all partitions). At the end, the installer ask if I want to install grub to mbr. I replied yes. After reboot, only the 2.6.32.3-amd64 and the recovery kernels show up on the grub screen, no winxp.OK, I booted into squeeze kernel and looked at the /boot/grub/grub.cfg file, and there winxp is not included in /etc/grub.d/30_os-prober section. In terminal, I typed
#os-propber and it found winxp in /dev/sda1
then I typed
#update-grub
and now /etc/grub.d/30_os-prober now show winxp.I rebooted, and winxp shows on the grub screen, and I chose winxp.It came back with "ntoskrnl.exe ...error... re-install ntoskrnl..."Here are the details:
fdisk -l
root@SHUM-AMD64:/home/shum# fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
[code]....
View 14 Replies
View Related
Apr 4, 2011
I installed Squeeze on a server today, and struggled a bit because the network card needed non-free firmware (Broadcom something). The server had no floppy, so I had to go and get a pen drive and put firmware from non-free on it to get it to work.
I agree on the political issues on this, but sometimes it's non-free or nothing.
So I was wondering if someone know of a patched netinstall, or know how to make one? Then I could give the pen drive away to something more useful that keeping non-free firmware. Warnings and questions about the non-free would also be nice.
View 2 Replies
View Related
Mar 20, 2011
I've installed Debian Squeeze on my server several days ago. During install process installer asked me to provide USB flash drive with firmware aic94xx-seq.fw. All went fine. Today I installed all updates to my system with "U" in aptitude. Aptitude installed kernel update 2.6.32-5 and created initrd accordingly. But now I can't boot up my system because it can't find LVM volumes on harddrive connected to Adaptec RAID card. How can I boot my system now? I have USB with firmware.
I have netboot CD. Unfortunately when I tried to edit boot records in grub I found that there is no my old kernel anymore. The only kernel grub sees is the new vmlinuz kernel and new initrd How take make my server alive?
View 2 Replies
View Related
Apr 2, 2011
I have a HP ProLiant DL380 server and I am trying to install Debian on it. I had an error that said dhcp config failed at the installation and Debian could not find my NIC. I've Googled it and found out that I need to install required Broadcom NIC drivers.
There are images that 3rd people have created but I don't want to use them as it will be a server.
Another way to install them is to download .deb package and install it from a removable media when asked.
So I went ahead and did an exper install mode and choose adding packages from a media so an option appeared for me to install stuff from removable media now.
Each time I choosed it, my flash drive's lights were blinking but then I was getting an error says this package can not be installet are you sure to instal non signed package.
I say yes at that stage but I still can not install and it says this is probably happening because of kernel version miss match.
I downloaded latest stable copy of debian from official debian site and downloading the stable squeeze copy of the driver from official Debian site too.[URL]..
View 1 Replies
View Related
Jan 13, 2011
Is this card supported in Squeeze by either the non-free firmware or the proprietary driver? I just got one to stick into an older box that will be going to a college girl that wants the 3D desktop in KDE. The built-in video was a joke and wouldn't even work without compositing. It was one of those crappy, non-standard pieces of crap known as a "Unichrome" (not the pro).
View 10 Replies
View Related
Mar 31, 2011
I have an old(ish) Macbook laptop. It comes with built-in bluetooth. The box says "Built-in Bluetooth 2.0 + EDR (Enhanced Data Rate)".
I'm not sure if it interfaces via USB or not, but I do not see any bluetooth stuff via lsusb. I do see bluetooth stuff when looking at dmesg. But when I look at hciconfig I see nothing at all. Here's what I get with the various commands:
#lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 05ac:8240 Apple, Inc. IR Receiver [built-in]
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code].....
View 6 Replies
View Related
Aug 16, 2010
This is an Arch / Win7 dual boot. I've got a bluetooth keyboard and mouse. The mouse is persistent across boots but the keyboard needs to be rejoined every time.
View 1 Replies
View Related
Jul 26, 2011
I purchased a ASUS USB-BT211 Bluetooth Dongle and I'l like to get it to working in Debian 6.0 Squeeze 64 bit.
uname -r gives....
I plugged in the USB Dongle:
lsusb gives....
lsusb -v -d 0cf3:3000 gives...
cannot read device status, Operation not permitted (1) larry@debian:~$
What do I need to do to get the Bluetooth Dongle Functional?
View 3 Replies
View Related
May 9, 2011
I recently upgraded this machine from Ubuntu Maverick 10.10 to Debian Squeeze, x86_64, by wiping the root partition (I kept my backup and my home partitions). Everything has gone OK except this: for whatever reason I cannot pair my Microsoft Bluetooth Notebook Mouse 5000 with this machine any longer. In bluetooth-applet I can see the mouse when I go to pair it with the machine, but it simply times out and the pairing fails.
The target mouse definitely used to work in Ubuntu, so I doubt it's a problem in the physical layer. I tried another Bluetooth mouse (a Rocketfish/BestBuy POS), and it doesn't pair either. The Microsoft mouse I would like to use pairs just fine with my Debian squeeze laptop, but they're not using identical Bluetooth adapters as far as I can tell. lsusb reports that I've got a Broadcom BCM2210 in my workstation (the subject of this post), and lsusb on my laptop reports some kind of Broadcom Bluetooth adapter, but doesn't report its chipset.I'd really like to stay on squeeze if possible, but my googling for this has only led me to old documentation, or stuff that applies to wheezy or sid.
View 4 Replies
View Related
Dec 15, 2015
I'll start off with stating my problem and summarize how I got to it.
I installed Windows 10 on an SSD. I installed Debian 8.2 after it. The SSD was/is a GPT disk. I installed both installations from a UEFI booted device (DVD for Windows, and USB drive with Live CD for Debian).
I tested it after each installation making sure I could boot via UEFI into Windows, then Debian, then Windows, to make sure nothing broke.
I rebooted the machine. Suddenly, no more UEFI. Nothing. I didn't change any BIOS/UEFI setup menu settings. Not even my USB drive with Live CD will boot through UEFI anymore. Even when nothing else is plugged into the system.
My situation is actually a bit more complicated than that, but I think that will suffice for now. I can still boot into the Live CD on the USB drive, just in Legacy mode only. I mounted the EFI partition on /mnt/boot after I mounted the file system for Debian on /mnt. It is identical, as far as I can tell, to as it was before when it was working.
My motherboard has CSM and Secure Boot, both have been set up how they need to be to boot UEFI into Debian. Tinkering with them further after things broke did not fix it. I tried all variations of options/settings.
The GRUB Reinstall guide says to be in EFI mode before starting it, so I can't do that.
My motherboard is an ASUS X99 Deluxe, and I've heard ASUS has special "features" (read: bugs) that come with their boards. Searching hasn't brought up any other people with this issue. I believe the firmware is updated to it's most current one.
I've tried dd-ing my backup of my old system, from before trying to migrate to a Dual Boot system, to the SSD (after backing up the dual boot setup with dd -> <name>.img via the Live CD USB). However, that won't boot either as it is a UEFI install as well.
The layout of my EFI partition is as such:
/boot/EFI/Boot/bootx64.efi
/boot/EFI/Microsoft/<Microsoft-naming>.efi
/boot/EFI/debian/grubx64.efi
I've heard that the standards on how that's supposed to be set up isn't a standard. However, since it worked booting into the OS' the first time, I don't see how that could be the issue (a bad hierarchy layout leading to the UEFI not being able to see the OS installs).
I've seen that I can boot to an EFI shell (called Shell.efi, apparently) via an option in my UEFI BIOS setup menu on my motherboard. Is that an option here to somehow bypass this strange issue?
All I can think to try is burn it all and start over. But not knowing what caused it means I could just make it happen again. Plus, I can't boot into UEFI install media, so I can't install UEFI boot OS'. :/
View 5 Replies
View Related
Dec 13, 2010
I've recently bought a new computer and installed Windows 7 on it, but left 100GB of space on a separate partition so I could put Debian next to it in dual boot. I have the new Intel i7 950 processor and I run Windows 7 Proffesional 64 bit, so I assumed I had to pick the ia64 debian image. However the CD I burned from the ia64 image didn't boot. (a black screen started and an underscore kept flashing, but nothing else happened)[URL]
I've managed to install i386 Debian on a older intel pentium 4 computer before and that worked fine. I believe I used another application to burn the CD then. This time I've burned the CD with the default Windows CD burn application. I can try burn more CD's but I don't have much left so I want to make sure this is the problem before attempting again. (the burned files on the ia64 CD look exactly the same as the files on the i386 CD, when browsing through the cd files in windows) "If your PC has a 64-bit AMD or Intel processor, you will most likely need the "amd64" images (though "i386" is also fine), the "ia64" images will not work."This seems a bit strange, they recommend me to use the amd64 image if you have a "64-bit AMD or intel processor". I dunno if this is a typo, but it seems weird to me that the AMD-64 Debian version would also work on my Intel machine
View 11 Replies
View Related
Jan 28, 2016
I have set up authentication when I am logging from my laptop using windows 7 (putty) into Debian server (see this post [URL].....) but since my laptop is dual boot (Windows 7 and Ubuntu) how would I set up authentication when i am using Ubuntu since from Ubuntu I will be logging into Debian SSH as same user that I am when logging from windows?
View 1 Replies
View Related
Jul 30, 2010
I had to boot into my Windows 7 install on my laptop for the first time in a few months and I noticed that the Windows clock was 4 hours ahead. Windows sync'd its time with the internet, then I booted back into Debian (Lenny) and my clock was now 4 hours behind. Both OS's are set to the same time zone (EDT). The minutes were correct in both systems. Could the fact that EDT is UTC-0400 be relevant?
View 7 Replies
View Related
Aug 30, 2014
I recently installed Debian 7 on a dual boot with Windows Vista. Thus, when I boot the computer, I am prompted by a GRUB screen to select Windows Vista loader, Debian, and Debian (recovery mode). I would like to upgrade Windows Vista to Windows 7. Will this cause an issue with GRUB? Will a Windows 7 loader be added to the list or will a Windows 7 loader replace the Windows Vista loader? Will there have to be a setting change within Debian? Within Windows?
View 6 Replies
View Related
Sep 4, 2015
I have a Dell laptop (inspiron 1150) which was dual booting Windows XP and Ubuntu 9.04. I have successfully installed Debian Jessie Standard over the Ubuntu. I pre-partitioned using gparted-live to make a separate single partition for the Debian install. Guided partitioning was then carried out by the installer producing separate /, /home, and swap partitions. After installation, the grub menu shows an entry for Debian and Windows XP. I can boot Debian, but not Windows XP. The symptoms are the same as reported in other forums: A terminal is displayed, vanishes and the system reboots defaulting to the Debian boot.
The grub.cfg file for the Jessie system has an other-os entry:
Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
set root=(hostdisk//dev/sda, msdos2)
search --no-floppy --fs-uuid --set=root cc0ce0ab0ce091ae
drivemap -s (hd0) ${root}
chainloader +1
}
The original Windows entry for the Ubuntu install was:
Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
insmod ntfs
set root=(hd0,2)
search --no-floppy --fs-uuid --set cc0ce0ab0ce091ae
drivemap -s (hd0) ${root}
chainloader +1
}
The partitions produced by partman look OK (during the pre-partitioning I did not touch sda1, sda2, or sda3):
Code: Select all~ # fdisk -l
Disk /dev/sda: 37.3 GiB, 40007761920 bytes, 78140160 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code] .....
Partition table entries are not in disk order.
The os-prober found XP:
Code: Select all~ # os-prober
/dev/sda2:Microsoft Windows XP Home Edition:Windows:chain
So it seems that everything is in place, but there are perhaps important differences in the grub.cfg files. Are the two "set root" commands equivalent for example?
View 5 Replies
View Related
Dec 28, 2015
I have Windows 10 and Deb 8 dual boot, and I need to re-install Windows but want to avoid (or at least plan for) losing Grub/Linux boot.
Last time I re-installed Windows after Linux I ended up having to re-install Linux again afterwards as well, because I couldn't recover it (seemingly due to complications from encryption). So this time I'm wanting to plan and avoid that.
CURRENT DISK PARTITIONS:
Code: Select allsda1 | 550M | EFI System
sda2 | 128M | Microsoft reserved
sda3 | 175.8G | Microsoft basic data
sda4 | 286M | Linux filesystem (Boot)
sda5 | 28.2G | Linux filesystem (Root)
sda6 | 91.3G | Linux filesystem (Home)
sda7 | 1.9G | Linux swap
[Code] ....
As there is a "Microsoft Reserved" partition and a separate Microsoft directory within the EFI partition, if I just go ahead and reinstall Windows will it install it's boot loader/image to one of it's own partitions? And NOT affect anything else like Grub and other Linux things?
Logic tells me yes, but there seems to be many issues on the internet about installing Windows after Linux.
My primary concern is whatever happens with Windows or anything to do with dual loading etc, is that Linux will still just boot, or I can get it working again without much hassle.
Why is there a reserved Microsoft partition AND a Microsoft directory in the EFI partition? Which one boots Windows?
Why is there a separate Linux Boot partition AND a Linux directory in the EFI partition? Which one boots Linux? Where is Grub invoked from, is one redundant, etc?
How these work. It is possible I've set them up wrong, or with redundant partitions, but both systems have been booting ok for months.
View 3 Replies
View Related
Feb 3, 2016
I've been using Debian for a few years but always on dedicated boxes and/or VMs.
Finally decided to dual boot Debian and Windows on my main Desktop PC.
Installed as I normally would using, however this time using a seperate drive (one for the existing Windows 10 install and the other for Debian), Debian install detects that windows has an EFI partition and sticks an entry in there, which is fair enough, and everything working fine. Then I spent some time configuring all my software and set it all up just the way I like it. I've rebooted Debian a few times to check it's working correctly and it is.
The issue arrives when I reboot and load into Windows 10. It boots fine.
However after a further reboot GRUB no longer loads... and the machine just boots directly into Windows 10.
After doing some further digging into my EFI partition (and reinstalling various times) it would appear that after a reboot Windows 10 deletes the entry GRUB creates in my EFI partition after EVERY reboot.
Done some googling and most people advise turning off 'fast boot' in Windows as it locks certain partitions to facilitate the machine going into hibernation, only to find that it's always been turned off on my machine (I recall due to a driver issue with my graphics card this had to be turned off when I installed Windows 10).
I've found this article on the Ubuntu forums : [URL] .... however I've tried their steps and windows is still doing a hostile takeover of my EFI partion after a reboot!
Any way to stop Windows 10 from interfering with my EFI files after a reboot? (without doing the obvious thing and kill Windows off).
View 4 Replies
View Related
Feb 1, 2011
I have used dual boot systems using various versions of windows and Debian for many years and have encountered no problems. However, I have a problem with installing Debian on a EeePC (ASUS PC1201) which uses Winows 7. I can not even get started because I can not understand the information that I have on my hard drive partitions. Windows 7 says that I have the following :
Local Disk(C:) 78.1 GB free of 99.9GB
Local Disk(D:) 49.8 GB free of 83.8.GB
NewVolume(G:) 948 KB of 0.99 GB
Local Disk(F:) 37.9 GB free of 38..0 GB
(Originally the ASUS only had two partitions C: and D: I used Gparted to genetate F: and G:)
gparted-live-0.7.1.5 says that I have the following :-
/dev/sda1 ntfs 992.5 KB
/devf/sda2 ntfs 100.00 GB with 66.09GB unused
/dev/sda3 ntfs 132.88GB with 129.88 GB unused
unallocated 1.00 GB
Debian Squeeze (the net install version) will not install. G was the result of trying to provide some swap space. How do I prepare the hard drive so that Squeeze it will install on F: ?
View 5 Replies
View Related
Jul 29, 2011
how to install Debian after Windows is already installed. Could someone give me a brief guide to begin the process of installing Windows? When I installed Debian I already made a partition for windows (in the same hard disk), I hope I did it right.
View 3 Replies
View Related
Sep 3, 2015
I've a Lenovo G50-80T with W8.1. I want to install Debian 8.1 in dualbooting mode. I've done this other times without problems. But this time I want encrypt the Linux partition (not the Windows partition). I'll use dm-crypt to do that. I want to know if this way is secure for protect the data on Linux partition or if I need encrypt the entire drive.
View 3 Replies
View Related
Apr 7, 2011
I'm currently dual-booting Squeeze & Windows XP on a machine i use frequently.
In my experience on the desktop, i now see no reason to have Windows XP as a boot option, & wanted to try & avoid a full re-installation of Debian in order to remove XP (merging it's partition with / ).
I have a checklist that i put together, but wanted to be sure this was all correct before going forward.
1. Perform full back-up of all data.
2. Boot into Debian, through GUI -
System Tools > Disk Utility
- Select HDD (80GB Hard Disk)
- Select windows partition ( /dev/sda1 )
- Format /dev/sda1 to Ext4 Filsystem
3. Boot Live CD
- Use gParted to extend /dev/sda2 (was 38GB, will extend to 78GB)
4. Remove XP from the boot menu.
( Note: My ~ folder is on the same physical drive as / (same volume), but i actually store all Media on a separate physical drive which is formatted in NTFS. I plan on reinstalling XP using a virtual hard disk, & sharing that with the virtual machine.Here is a screenshot of my Disk Utility - [URL]
View 6 Replies
View Related
Mar 26, 2010
me a easy and right answer to this post
View 3 Replies
View Related
Jan 28, 2011
is it safe to install a dual boot windows 32bit and a linux 64bit on the same pc?
View 14 Replies
View Related
Jun 4, 2011
after installing Ubuntu Natty Narwhal 11.04, I'm experiencing tons and tons of complications with the wireless Internet connection. I have solved most of them. Now I have only one thing left. When I hit the drop-down menu for wireless connections, it says "Wireless connection (Firmware missing)"
I have installed the driver for my wireless card but what is the firmware? I honestly don't know what it is although it's very basic. I have a Broadcom 43xx as my wireless card (specifically 4306). How do I get the firmware for it? Do I find it in Windows? Also I cannot get b43-fwcutter because I have absolutely to Internet connection on Ubuntu. To post this, I'm using Windows.
View 4 Replies
View Related
Oct 7, 2010
Im having an annoying problem here, after the reinstallation of opensuse, bluetooth works fine, i can connect my cell phone and logitech mouse normally, as soon as i install the bcm43xx from the scrtipt included in /usr/sbin/ bluetooth stops connecting to devices, it can find tem when searching but the forward button is dimmed.
when i try hcitool scan,= it successfully finds the device,
hcitool cc xxxxxxx it reports an I/O error,
View 4 Replies
View Related
Jul 10, 2015
I would like to upgrade from Win8.1 to Debian 8. This post might require some Wind expertise as well. I have to deal with the dreaded UEFI interface.
I got the iso with the added firmware from here: [URL] ....
The i386 download and it appears to be 334 MB. I pretty got it because I don't want to mess with the wireless controller (been there done that.)
As far as the Wind side goes I disabled secure boot. Just whenever I get to the fancy blue screen, I select boot from EFI DVD. Then it just says it can't load it and asks if I want to continue loading the OS. This might be useful I used the default Desktop Burning Gadget to burn the disk image.
View 14 Replies
View Related
Apr 25, 2010
I downloaded Ubuntu 10.04 and I want to make a dual boot with Windows 7 Ultimate using Windows Boot Manager...
I deleted my last Ubuntu OS (9.10) just because of GRUB
View 2 Replies
View Related
Jan 19, 2011
I recently moved and didnt have internet. Out of a fit of boredom i decided to get me Ubuntu 10.10 disk and dual boot. My laptop has a SD slot in the front of it that has never been used so i decided that itd be cool to have ubuntu on an SD card that i could boot any time. I used the default installer to install it onto the SD card instead of using the Universal USB Installer (i imagine this is where i went wrong). It installed and everything works fine and when i boot up it lets me choose between Linux and Windows when the SD card is inserted. When it is not i get this screen http://imgur.com/gg63v. The only really problem is me worrying that the sd card will be lossed or get broke and i will no longer be able to access Windows. Is there anyway i can set the windows boot loader back t the default bootloader (i think this is what need to be done i may be completely wrong>
View 3 Replies
View Related
