why, after booting to windows for any length of time that upon rebooting to Fedora the system time is 3 or 4 or 6 hours off? Sure, it is easily fixed with ntpdate but is there a more permanent fix?
View 11 Replies
I am having dual boot system(windows 7 and Fedora 12).When i switch on my system.It show the the timer 3 sec in order to get boot selection window(means window which asks that what to start fedora 12 or windows 7).I want to increase this time from 3 to 10 sec.
[URL]
I'm running a dual-boot; Lucid and Win XP on a HP Pavillion.My time settings are about 8 hrs off between the two operating systems. If I correct the time in Linux, it will be wrong when I boot in Windows. If I correct it in Windows, it will be wrong again next time I boot into Linux.Besides the obvious solution of removing Windows from my machine (which I'm not ready for), what should I do to fix this?
View 1 Replies View RelatedWhen booting Fedora 11, my system hangs for a very long time on starting udev. Sometimes I get an I/O error. However, my hardware is fine. I do eventually get in to the system.
View 7 Replies View RelatedThe time in my Fedora 12 x64 installation is 5 hours behind what it should be. When I change it to the correct time, Windows XP x64 is now 5 hours ahead! (Dual boot setup). How I can sync the times on both os's. Both are set to GMT-5.
View 4 Replies View RelatedI have installed Fedora10 on my PC which had an XP. Now Fedora waits just 2-3 seconds to press any key to choose between XP and Fedora. Actually if I don't press any key it automatically begins Fedora. How can I increase this time interval?
View 3 Replies View RelatedI'm having an issue with dual networking on RHEL 5. My initial question is can the order the ethx (0,1) devices are brought up be changed at boot time, so I could bring up eth1 before eth0?
Some background: eth0 is DHCP'd and using DNS, basically this is my primary network. eth1 is an isolated subnet, with a manually configured IP which has no connection to eth0 or the outside world. When I bring up networking it first brings up eth0 and then eth1, what happens is eth1 becomes the 'primary' network of the host and I lose my connection to DNS/NFS/NIS and the outside world.
If I login and manually bring up eth1 first, then eth0 everyone is happy and connections work. So, I'm looking for a solution to either bring up eth1 before eth0 or somehow make eth0 my primary IP and not have it be clobbered by eth1.
I have managed to reduce the default LVM F8 install to make room for F10... See Bare metal backup:
[URL]
And shrink the partition:
[URL]
I now have about 50G free on a 80G drive. The F8 system has a small /boot and an LVM partition that includes swap. What I want to do is install F10 WITHOUT LVM on the free space. Access to the F8 LVM drive would be a plus but not complete necessary. I just want to keep the F8 system as is until I get set up with everything under f10, which may be a bit. I am not sure what to enter for mount points for the custom drive layout. I need a small swap partition (I don't want to use F8 swap because it will be going away in the future, for example when I install F12 and have dual boot F10/F12 system. What should I have as primary partitions and which as secondary?
How do I set up the boot? Grub?
I got problem in my internet every time when system is boot or network is disconnected i have to enter the DNS address(number) primary and secondary
View 7 Replies View Related i have a dual-boot system running with Fedora 11 and (formerly) windows XP. The windows xp has become unbootable, and i installed Fedora on a separate partition so i could run the computer. is there a way i can reinstall windows XP to the other partition using Fedora 11?
Note: The reason i installed fedora Is because i dont have a Windows XP Boot cd, and i believe there is a backup somewhere on the hard drive.
I'm trying to get a dual boot system. [URL] So i'm just following it. But but when i try to load Linux from the NTLDR i just get this error: BootPart 2.60 Bootsector (c) 1993-2005 Gilles Vollant [URL] Loading new partition Bootsector from C.H. Cannot load from harddisk. Insert Systemdisk and press any key.
View 1 Replies View RelatedI have a dual boot system. I previously managed to mount that drive under Fedora by specifying its label in /etc/fstab. But something changed that label, so I had to modify the entry in fstab. This time, using blkid I found the proper UUID and put that in /etc/fstab. So now I can mount the partition. But I also want to create a link on my desktop to my files under Windows.The location is /mnt/c/Documents and Settings/len/My Documents But ln -s keeps failing on that because of the spaces in the name. I know I found a workaround that previously , but I can't remember what it is.
View 1 Replies View RelatedI am having 320G of HDD , on the HD i m having 40G free space when i m trying to install rhel5.4 in the free part it is showing me this error
Could not allocate partitions as primary partitions: Partitioning failed: Could not allocate partitions as primary partitions.Not enough space left to create partition for /boot.
I want to make dual boot system with windows Xp and Linux fedora 11, please help and guide me in detail, also I tried it with fedora 10 and windows xp, it easily works without any problem, but in fedora 11 the grub boot loader is not detecting the installed Xp
View 2 Replies View RelatedI used to know how to access and rw other linux drives and do the fstab magic. For some reason I've lost my touch. I just want the drive to automount and have full access. I don't need a beginners tutorial on mkdir and fdisk -l. Is there a foolproof way to get my drives to do what I want? I dual boot fedora and ubuntu, but have the same issues on both.
View 1 Replies View RelatedI just recently installed ubuntu 9.10 in my upstairs computer. It is a single boot system.Downstairs I have a dual boot system. I have windows vista and ubuntu 9.10 installed. It worked fine. I wanted to make this a single boot system and uninstall ubuntu 9.10. I cannot get rid of the grub bootloade
View 14 Replies View RelatedI am/was(?) running a dual boot Windows 7 Home Premium and Fedora 12 system on an AMD Phenom platform.
I thought that I would try the KDE desktop and installed it with the command
yum groupinstall "KDE (K Desktop Environment)"
After tasting KDE for a while I decided that I far prefer Gnome.
I removed the KDE with
yum groupremove "KDE (K Desktop Environment)"
This appeared to work but I then found that whilst I can boot into Windows 7, I can no longer boot into Fedora 12.
I have tried booting the F12 DVD and going into to the Rescue function. I re-installed grub but still cannot boot into F12.
I have looked at grub.conf but can see nothing wrong.
I actually have a Suse running on a partitioned harddisk of 27GB but I prefer Fedore anyway. I would like to install Linus Fedora on my computer to make a dual boot system (Vista and Linus) by overwriting the previous Suse. My question is
Will I be in OS booting trouble (i.e unable to resurect the previous boot screens, windows might possibly be deleted, or not be present in the boot options) if this is done ?
Also, because I have only one disk (the first disk of Fedora 11 downloaded), will it be fine with just one first disk ? (there are several to download but I think I assume I am not going to use all of them during installation, right ?)
I have installed Ubuntu 10 alongside with Windows XP. Consequently I need to make a choice at boot time. However, I feel that the system is not waiting very long, maybe 5 seconds or so, before going automatically into Ubuntu. Can that time be increased? If so, where or how?
View 1 Replies View RelatedI know this might sound stupid, but how do I change the time delay for a dual boot?
View 3 Replies View RelatedJust making one last tweak with my fresh install of F12KDE. I need to . How do I do this
View 2 Replies View RelatedI had to boot into my Windows 7 install on my laptop for the first time in a few months and I noticed that the Windows clock was 4 hours ahead. Windows sync'd its time with the internet, then I booted back into Debian (Lenny) and my clock was now 4 hours behind. Both OS's are set to the same time zone (EDT). The minutes were correct in both systems. Could the fact that EDT is UTC-0400 be relevant?
View 7 Replies View RelatedWe have 2 applications set as S96 and S98 at rc3.d and rc5.d simultaneously. Both applications create a system V shared memory segment by calling shmget.If the system boot at runlevel 5, both applications can obtain their shared memory segment id correctly, i.e. 98305 and 131074 individually. While there is a root owned segment id 32768 takes first seat on the list. This is the id list:
root, 32768
S96_app, 98305
S98_app, 131074
[code]....
I'm not consistently able to boot into Ubuntu Lucid on my new dual boot (w/ Win7) setup. Machine is a Dell XPS 1645 laptop. Usually it takes 1-3 tries of hard shut down and restart before the OS starts up. Boot info script results are below. Windows starts up fine everytime. What I usually get is this: Dell startup screen, then Grub2 menu, then after selecting Linux kernal a blinking cursor at upper left of monitor and it just hangs.
View 9 Replies View RelatedI was struggling how to phrase the question (in the subject) so let me clarify... I wish to install Windows 2000 and then do Ubuntu, on the same PC. I never had a dual boot before but I understand that it goes automatically (after a short time) to default Windows if Ubuntu is not chosen (on the boot up screen), correct? If so, if there's a "countdown" of sorts, is there a way to disable it? I wish to have control over that aspect, have unlimited time during that boot "choose one" screen.
View 7 Replies View RelatedMy fedora 11 (2.6.30-102) spends a long time while initializing services on
"Starting system message bus:"
---------- Post added at 08:47 PM CST ---------- Previous post was at 06:33 PM CST ----------
Auth is LDAP.
There's a 3.5 years old bug in redhat bugs database, that's still not resolved,regarding dbus trying to use ldap auth, before ldap service is started.Workaround is to change ldap config to soft binding.
3.5 years for a bug that affect enterprise users - are you there redhat?
I've been having a problem on my AMD based machine, 4cpu, gigabyte ga-ma78gm-s2h Mobo, 8GB mem, two 2 terabyte Sata HDs.One thing I've found is that any kernel after 2.6.32-17 has a randomness at boot time whether the system will completely boot or not.
For instance just today I downloaded and installed 2.6.32-24
It fails to boot (I've tried cold boot, warm boot).Running its repair also fails to completely boot.My experience is that if I keep trying it "may" eventually boot but I believe there was some change after 2.6.32-17-generic that's causing the problem.Because as with 2.6.32.23... which also fails to complete bootup many times... eventually my guess is that 2.6.32.24 will also boot "sometimes".But why does 2.6.32.17 always boot for me? Something changed and its not my setup.
I have a jpeg file on my Windows system that won't delete. However, when I try to boot into safe mode to delete it, I can not get into the menu to select "Safe Mode". F8 just boots me right into Ubuntu.I have Windows 7 and Ubuntu 10.10 on an Acer Aspire 5520.
View 3 Replies View RelatedI've installed Ubuntu on my new desktop alongside Windows 7 (each OS is on a separate drive), I seem to have run into a small problem. Let me start with what I did:
- Unplugged 1TB drive from the PSU, BIOS was not seeing my formatted (and thus empty) 500GB drive and I couldn't put it into the boot order at all with the 1TB turned on.
- Loaded up the boot CD and was able to install Ubuntu 10.1 on my 500GB drive.
- Did a bit of configuring, shut my PC off and plugged my 1TB (with Windows 7) drive back in. I tried to see if I could now see my Ubuntu drive in BIOS but nothing is there - just the Windows drive is in the list of available drives to boot from (along with DVD-ROM and USB).
This is where I've run into my problem. What I want is to have a nice GRUB boot menu at the start like any other dual-boot system but just have the two operating systems on separate drives altogether.I did it this way because I was having issues with the advanced partition menu on the boot CD so just went ahead and followed the KISS method by unplugging the Windows drive.
I was told by a friend that if I put my Ubuntu drive into the first position in my boot order and the Windows drive in the second, then I could boot into Ubuntu and run a GRUB update command (he told me to google it) and that would create the necessary GRUB that had the entries for Windows 7 and Ubuntu.Both operating systems are 64-bit, I imagine that might make a difference in whatever help you guys can offer me. I love the hell out of both OS's and want to be able to use them interchangeably.
This is the third time I try unsuccessfully to install Debian as a second OS on a hard drive. When it gets to the end of the installation process the installer asks whether I want to go ahead with the Grub Boot Loader, I choose yes. The end result is however that I can't boot that partition within the hard drive -- i.e., Debian. Can someone tell me what is going on? Should I not use the Grub Boot Loader when I have more than one operating system on a machine? Should I not install Grub on the Master Boot Record (MBR)?
View 3 Replies View Related
