Networking :: Can't Connect More Than 2 Users In Samba
Sep 13, 2010
I've done all this config [URL] This config for the "foo" folder:
("pruebas" its a user)
Code:
[foo]
path = /home/pruebas
ready only = no
guest ok = yes
[code]....
I have the [HOME] code too, its everything fine with it, and I cant connect with another user ("alfredo") from Red Hat to Windows XP with no problem... but as soon as I double click in "foo" directory, appears this:
[URL]
Already tried to disconnect from windows the directories with "net use" but it doesn't work
View 2 Replies
ADVERTISEMENT
Jan 12, 2010
I'm not sure if this is even possible and I've tired searching, but I can't seem to figure it out. I have a few shares setup in Samba. I want them to prompt for a username and password. If an invalid user/pass is entered I want the user to be authenticated as a guest.
View 6 Replies
View Related
Jun 27, 2011
I have an ubuntu 11,04 samba domain server, I want to also configure this machine to work as a dhcp server, however this have give me some issues with te windows 7 workstations, my guest is that it have something to do with the iptables because those station do join the samba domain went both server and workstation are conected to a router.
This is the script I use at boot
Code:
#FOR SHARED INTERNET
/sbin/iptables -P FORWARD ACCEPT
/sbin/iptables --table nat -A POSTROUTING -o eth2 -j MASQUERADE
[code]....
I haven't test it with windows xp station but I have use the same code in the past with no problems, and since this is my first time joining windows 7 station i belive there must be some other port that need fowarding.
View 3 Replies
View Related
Jun 24, 2011
I`am just trying to connect Samba with ldap to make it simpler for the users to log in. We have already attached squid, so by that we thought it would be easy to do the same with samba. I think we did something wrong with the ldap config for the os with is btw:
Quote:
SUSE Linux Enterprise Server 11 (x86_64)
VERSION = 11
PATCHLEVEL = 1
We added
Quote:
ldap admin dn = cn=xxx,o=xxx
[Code]...
View 1 Replies
View Related
May 26, 2009
I am trying to configure samba for anyone of the scenarios in the subject. here's what my smb.conf looks like:
Code:
workgroup = RnD
[Samba Share]
comment = Samba share on Ubuntu!
path = /srv/sharedfolder
available = yes
[code]....
The error while trying to connect to the share is:
smbd/service.c:make_connection_snum(1082) Can't become connected user!
View 12 Replies
View Related
Jun 8, 2011
I would like to know how can I share folder with samba that samba does not show it to those users that have no access to it?
View 4 Replies
View Related
Jul 11, 2009
I work as an system administrator for AIX and Linux servers. We have an FTP server running in Linux which has shared folders to Windows domain using Samba. The new requirement is to map users created to Linux machine to Windows users in such a way that, when a user logins into Windows machine with an ID say "X123" in domain "TEST", his access control to the samba shares should reflect based on the same user ID created in Linux machine.(FYI. Both the Windows and LINUX machines are in same network and domain). Please let me know the step by step procedure to configure Linux machine (smb.conf entries or any new file to be created for user mapping) to identify Windows user Login and provide access restrictions accordingly.
View 1 Replies
View Related
Feb 7, 2010
We have an existing Windows 2000 network that I am trying to add an Ubuntu 8.04 server to. I have put links into the windows domain DFS to the linux machine's samba shares.
The shares work fine for local users that are physically on the same network (192.168.0.X). Remote users from other offices or dialing in with a vpn client can not access the these particular folders off the DFS. However, they can map them directly from the ubuntu server.
View 5 Replies
View Related
Nov 23, 2010
If I want to add Windows & Mac users as Samba users, must I first add them all as Ubuntu users? If so, since none of the other users will actually be working on the Ubuntu Server, how do I disable the other non-admin users on the Ubuntu Server login screen. I am using Webmin to administer some server settings, and command line for others.
View 3 Replies
View Related
Mar 16, 2011
While using school internet, occasionally I cannot connect to their wireless at all. I know it is definitely the school's doing, under both Windows and Linux, my computer is denied connection for about 30 minutes, then it suddenly works. I always have the same address, but setting a static address does not allow me connection either. Everyone else has no problem connecting, so I am pretty sure the school denied my computer connection.
How can I workaround this? Changing my card's MAC address does not fix the problem. Is there another way to discriminate users?
View 4 Replies
View Related
Oct 12, 2009
Is there any way to limit x number of samba users by samba ? Say if there are already 5 samba users using the share, I would like to restrict any futher samba requests.. How do i do that ?
View 1 Replies
View Related
May 20, 2009
I recently have just started using linux and downloaded Fedora 10 and I'm trying to figure out how to fileshare and print share with my windows vista machine.I edited the registry file on my Vista machine HKEY_ LOCAL_ MACHINESystemCurrentControlSetContro lLsaLMCompatibilityLevel and changed the level from 3 to 1.I've also gone through a lot of tutorials on editing the smb.conf file and set my workgroup name, netbios, and changed permissions on my linux machine (a Lenovo netbook) etc but thats about as far as I can get. This may sound like a dumb question but I can't even get samba to connect on my linux machine so how do I do that?
I was wondering if any of you guys can provide a solution as to how to connect or direct me to a good howto for setting up and using Samba seeing how I'm a noob.I've been on Samba.org already and I'm more confused than ever.
View 2 Replies
View Related
Jul 16, 2011
I have installed ubuntu 11.04 recently.. how can i connect ubuntu with other windows users in a local network...
View 1 Replies
View Related
May 11, 2010
I was able to connect to my XP home machine from downstairs F12 machine with gnome. I also have laptop with F12 but with xfce windows manager, following the same instruction, (wireless work fine) I don't see the network icon in the file manager. Can someone let me know how to trouble shoot?
View 12 Replies
View Related
Mar 4, 2010
I am running Jaunty 9.0.4. I used system-config-samba (gui) to configure Samba. I put myself as a user and tried to map the drive from my local PC. I am unable to map the drive. On windows, I try to connect using a different user and when I select finish, it prompts me again and adds my workgroup before my user name.
View 8 Replies
View Related
Nov 13, 2010
I have a server running Ubuntu Server 10.04 that is a VirtualBox/Samba/SSH server. I have port forwarding set up for ports 22 and 3389 (SSH and RDP) and I want to access the Samba share without opening any other ports. I can connect to it from my internal network, but I want to be able to access it from school. My best guess would be to tunnel the Samba port through SSH, but I don't know how. I will be connecting to it from Ubuntu 10.10 Desktop.
View 9 Replies
View Related
Jan 27, 2011
Here is what I am trying to do. I set up a Samba server on Ubuntu 10.10, which seems to be working (sort of).
I set it up using Webmin, which has always worked for me before.
I set up two shares, both of which are read/write and are allowing any hosts. And are set up using the default samba configuration that is provided by Webmin.
For privacy reasons I won't disclose the domains, but I will call them test.abc.com and xyz.com
I set up /media/mount as a share called [mount_a] and I also set up /media/mount_b as [mount_b]
The server's host name in my internal network is mount-box
I originally mapped it to a sub-domain of my domain abc.com via DNS, so that test.abc.com resolves to the IP address of my router; which has all the necesarry port forwarding set up.
In windows explorer in the remote location I tested it by using \test.abc.compoonani_a, this works fine and after a password prompt I can access my files. However, I do not want to use this domain name for this server, so I registered a new domain name and again via DNS mapped domain xyz.com to the IP address of my router.
Since setting up the new hostname, I cannot connect to it via Windows to access the samba share. It just won't work. When I try to connect the password prompt appears and I put in my credentials, when I submit it the window re-appears and it has appended the servername xyz.com before the username, so it reads \xyz.com<myusername>, but won't let me connect.
If I try again with the previous hostname test.abc.com, it works fine.
What am I doing wrong that it would let me connect with one hostname, and not another.
View 1 Replies
View Related
Jul 22, 2010
i just installed zenwalk on another computer in my house (experimenting with zencafe as well) and i also installed the source code of samba directly from the website (i saw that the smbclient command wasn't there when i first installed zenwalk) i have a samba server that has ubuntu as its operating system and i would like to connect my zenwalk system to the shares so i can access them from that computer
i heard that smbclient is the way to go when you do something like this so i tried it a few times and nothing worked ps i am using webmin to configure samba on my ubuntu platform
View 7 Replies
View Related
Oct 9, 2010
create a pppd server to allow other users to connect through my telephone line.Could you suggest a documentation to get started?
View 2 Replies
View Related
Dec 11, 2009
I have just upgraded to FC 12 from FC 11 everything on FC 11 was fine, I has samba, openvpn, subversion, tinyproxy and apache all working fine. Friends could vpn in and do all the stuff they where allowed to do,
Now unfortunately I have this issue after upgrading to FC12, All the samba mounts have disappeared from all my friends computers, when I look at the log files I now see this;
smbd/server.c:457(smbd_open_one_socket)
smbd_open_once_socket: open_socket_in: Address already in use
View 1 Replies
View Related
Nov 14, 2010
I am trying to connect to my samba server with xubuntu, so far with no luck.
I am trying to use fusesmb and have been following these instructions:
[URL]
as well as these:
[URL]
and these
[URL]
the top ones say to use Applications - System - shared folders to setup smb client. Xubuntu maverick doesn't seem to have that menu point. So I copied the smb.conf from my desktop machine. libsmbclient is installed.
fuse as such seems to run since teh folder that i designated as mount point (~/Network) changes owner to root when i run fusesmb Network. But apart from that nothing happens.
View 1 Replies
View Related
Feb 13, 2011
I have a problem with Samba. I've already configured my SMB.conf file, but I can't connect to my Windows shares by their host name. for example: if I try to connect to GDEA73-PC-1 share = netshare, server connection fails. if I try to connect to 192.168.1.171 then share = netshare, it works. How do I fix this? When I run findsmb, I am on the GDEA73 NETWORK workgroup as I configured, but my local PC is the only one on it...
View 2 Replies
View Related
Jun 1, 2011
I'm running 10.10 on a pretty fresh install with a brand new system I built especially for Ubuntu.For some reason, I'm beginning to have trouble with accessing my Samba shares from this computer. I have a Windows Home Server also running on my network and I have to be able to access the files on it.At first Nautilus showed "SERVER" in the folder tree when I clicked on "Network" and everything was working great. A couple of days ago my WHS "SERVER" suddenly no longer showed up in Nautilus and I had to mount the WHS server manually (via "Connect to Server...").
Now, today, even that doesn't work. When I try to mount manually I get the error "Failed to Retrieve Share List from Server". I can now no longer access the WHS from Ubuntu at all.Why has my ability to access the Samba shares on my WHS deteriorated over time to the point where I can't access them at all?? Any ideas?I have other systems on this network (Mac and Windows) and none of the others have any problems at all with the WHS. Re-booting WHS and router has no effect. I've changed nothing in my set-up. Is this update related?
View 1 Replies
View Related
Feb 22, 2010
I'm having some problems with sharing my printer via SAMBA. Connected to my Ubuntu 9.10 Desktop is a HP office-jet D135 witch I shared via samba. I have no problems printing from my Ubuntu laptop. And in Vista I can see and access all the other shares, including the printer. But ones i try to access the printer I get a pop-up window telling me: "unable tot connect to printer error code 0x00000709 check if the name is correct or if the printer is connected to the network" ( but of course in Dutch). What is going wrong here?My /etc/samba/smb.conf
[Code]...
View 1 Replies
View Related
May 17, 2010
I recently used this process to connect my Samba network to be able to access and allow Windows XP machines to access my computer on my office network.
For various reasons, all the XP computers on the network are set to fixed (do we say static?) IP addresses with manual DNS. Hence I realised during the Samba setup that I had to set a static IP on my Ubuntu machine similar to my Windows static IP's (ie 192.168.10.?) in order to be able to see the Windows share PC's properly.
Once I set my Ubuntu machine to static IP of 192.168.10.3 with subnet of 255.255.255.0 and gateway of 192.168.0.1 then I was able to access and be accessed by PC's on the network. However I couldn't access the internet after this. I input the DNS server in the edit connections as you can see per the attachment. All these settings (except the IP address obviously) were all now exactly the same as the PC machines, and I thought I'd now be able to access the windows network, as well as have access to the internet, however, even though my wired network is connected there is still no internet access.
I'm using the GUI under network connections to make all these changes if that is important. I can't understand why this doesn't work?
View 6 Replies
View Related
Mar 27, 2010
I have noticed that I am not the first one to have problems with samba and connecting to a Windows PC. I have read so many articles and I have tried a couple of things that seemed to make sense, but no luck.
I can connect from my Vista to my Ubuntu netbook remix, but not the other way around. I get the error message: "Unable to mount location", "failed to mount windows share" and I get "mount error 12 = Cannot allocate memory" in Smb4K.
There was a suggestion that "mount error 12 = Cannot allocate memory" indicated it was a problem originating in Vista, but the added registry values on my Vista PC that was suggested didn't change anything. I have also read and [URL] and implemented 3.1 and 3.2 but it made no difference either.
View 4 Replies
View Related
Aug 29, 2010
I'm running Lucid and and trying to get Samba set up to allow sharing files on my network. My problem is that my Windows laptop (Win7) can't see the Linux PC when I click on Network. It only shows my own laptop and my roommate's Vista laptop. However, if I manually connect to the computer (\serenity) it works just fine.
Right now I'm simply using the smb.conf that comes with the package and adding my share info.
The relevant section is:
Code:
View 2 Replies
View Related
May 12, 2011
When trying to connect to a Samba share, it requires to send the servernetbiosname. Let me try to describe it.At my university anyone has a personal web directory, which is hosted at another university. It's on a SuSE server, shared via Samba. There are several universities on this server, using the same Samba with different NetBIOS names.There is an open Cisco WiFi, anyone can connect. But to use it, you have to use VPN (Anyconnect for example or in my case the module Ubuntu provides).Now my problem is, I can't easily connect to any share on the server (tried several shares from several machine to be sure it's not just me). After trying several variants on bash, I finally figured out, that I have to supply the servernetbiosname to get it to work.Not working:
Code:
root@cmp:~# mount.cifs //svr1.sd.domain.net/htdocs /tmp/mnttst/ -o 'user=uname,domain=DOM' -v
[code]....
View 3 Replies
View Related
Mar 9, 2010
I have a networked raid drive. Thecus 2100. Its running linux, and includes samba sharing. On that I have a folder shared. I can connect to and read and write from nautilus. No problems. However, I can't use other apps through that method. Its not really "mounting" that drive in the sense you'd normally think of (afaik).
If I try to mount the folder, no matter how I have tried so far (-t cifs, smbmount, etc), I can navigate the folders, but if I try to read any file I get a permission error. Looking at the permissions with 'ls -l', everything looks OK. The weird thing is, I can write a file, then read that file back as long as its the same session.
Just now I tried 'smbclient' with no special arguments. Just the server and path url. It asked for my password. Once I was in, I had no trouble getting files. I had a thread about this a while back and there were several links and all sorts of command line options to try, which I did, with no different outcome. I think its got to be something much simpler and more obvious. smbclient and nautilus seem to have no trouble. Anybody know what they're doing differently?
View 5 Replies
View Related
Mar 18, 2011
At my office we are having a samba sever, staff will access their respective folder from their Windows XP systems. I wish to track all user access activity like file creation, modification, deletion and etc. I tried smbstatus -v, from the output I am not able to guess what the user done. I am giving some of the results I get please help me or you can suggest best way to get access log.
Samba version 3.0.25b-0.el5.4
PID Username Group Machine
14721 govind govind tsl-019 (10.0.2.64)
4832 chandra chandra trivent-9b92c9c (10.0.2.106)
Service pid machine Connected at
[Code]...
View 2 Replies
View Related
