I'm trying to set up Samba on a virtual Server.
When I connect to it from itself it works fine (smbclient -L localhost). But when I try to connect to it from the outside I get rejected.
Connection to AAA.BBB.CCC.DDD failed (Error NT_STATUS_UNSUCCESSFUL)
I'm guessing this is a ports issue? That's kinda weird since I thought Debian didnt come with an firewall. And port 80 and 22 works fine.
Strange things are happening today to my pc with debian squeeze 2.6.32-3-amd64 kernel.
It can connect to internet via my wirelss rt2870 driver (Ralink, Belkin usb wireless). But I cannot ping any of my other computers in the home network (served by a Belkin N+ wireless router). Other computers can ping it.
I am also connected via ethernet directly to another desktop. Last night I can access the shared file (samba windows share) in this other computer, using ethernet (disabling wireless). Today I cannot. I cannot even ping it or any computer, or itself.
I am using network manager with this interface:
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
I've reinstalled my debian file server - was running 4.0 and went for a clean 5.04 install.
Everything worked out well, system is running even more smoothly but I cannot connect to the shares.
I had backed up my smb.conf and put that one in place, the users are created + smbpasswd's are set.
Samba is running and yesterday (day of reinstall) I was able to connect without any problem but today I get a Quote:
Smbstatus shows that there has been a connection, the username is listed in /etc/passwd and I entered the password once again but no difference.
At first, I thought there was a problem with file/directory permissions but I have restored the data with rsync so those permissions are like before.
I have read quite some about setting up/configuring Samba and I guess it must have something to do with credentials but no clue to where to look anymore.
I recently have just started using linux and downloaded Fedora 10 and I'm trying to figure out how to fileshare and print share with my windows vista machine.I edited the registry file on my Vista machine HKEY_ LOCAL_ MACHINESystemCurrentControlSetContro lLsaLMCompatibilityLevel and changed the level from 3 to 1.I've also gone through a lot of tutorials on editing the smb.conf file and set my workgroup name, netbios, and changed permissions on my linux machine (a Lenovo netbook) etc but thats about as far as I can get. This may sound like a dumb question but I can't even get samba to connect on my linux machine so how do I do that?
I was wondering if any of you guys can provide a solution as to how to connect or direct me to a good howto for setting up and using Samba seeing how I'm a noob.I've been on Samba.org already and I'm more confused than ever.
I just installed UNE v10.10 on a new netbook and I guess I've become too spoiled using the Desktop's PLACES->Connect to Server because I can't find where this is in UNE. I'd also like to "bookmark" it so I can single click to connect to "crunch20/netshare2" (I have added ip for crunch20 in /etc/hosts).
View 1 Replies View RelatedI've done all this config [URL] This config for the "foo" folder:
("pruebas" its a user)
Code:
[foo]
path = /home/pruebas
ready only = no
guest ok = yes
[code]....
I have the [HOME] code too, its everything fine with it, and I cant connect with another user ("alfredo") from Red Hat to Windows XP with no problem... but as soon as I double click in "foo" directory, appears this:
[URL]
Already tried to disconnect from windows the directories with "net use" but it doesn't work
I am using my Red Hat Linux 9 box for samba server. I want to connect samba dir with two different permissions.
View 2 Replies View RelatedI have migrated a client's server from Ubuntu 8.04 to 11.04 (they wanted that instead of debian 6 or ubuntu server, despite my best efforts)
The only service still hanging in the balance is samba. It refuses any connections to it and I can not figure out why.
Here is my conf file: (i noticed the interface line is commented out - eth0 is what the machine uses, it was commented out on the old machine and worked though)
Code:
[global]
workgroup = WORKGROUP
server string = %h server (Samba, Ubuntu)
wins support = no
; wins server = w.x.y.z
[Code]....
I've setup a samba server on a centos 5 machine and am trying to connect to it via a windows 7. The problem I'm encountering is that the only share I am able to connect to is the tmp share. It doesn't matter if it is a protected share or not, I always get a "network path could not be found error" when trying to open the share from windows.
View 5 Replies View RelatedFairly new Linux user, running Fedora 12, attempting to set up a simple Samba share to share files with a Windows box. I've gotten to the point where I can connect from the Windows box, and see a home directory and the directory I'm trying to share. The home directory is accessible and works as expected, but when I try to access the other directory I get "The network path could not be found."
View 5 Replies View RelatedI set up a Samba server to authenticate 3 users: ladmin, lead, and volunteer. From both a Linux and Windows XP machine I confirmed all 3 can log in and have appropriate read/write access to the server. In Linux I used smb://host/ and was able to log in. In Windows I used the \host method to similarly browse the share. It seems both Windows and Linux machines have no problem connecting. But I also use a BartsPE (DOS) based CD to connect to the server and it keeps telling me that the password for volunteer (the account I configured to connect to the server) is invalid.
I checked the configuration file the password I'm using is correct. I'm guessing that the problem has to either do with the fact the passwords are encrypted, or that I'm missing some option in my smb.conf file. To create the lead and volunteer accounts I used webmin. I first created nologin Linux user accounts and then converted them to samba accounts using webmin. After doing this I was able to log in from Linux and Windows boxes without problem... the sticking point is this DOS connection. Here's my config file (with some modifications):
[code]....
I am running samba 3.5.8-74 on Fedora 14. I can connect to it from several Windoze XP machines by typing the ip address or searching for the computer name. However, when browsing the workgroup from XP, the share does not show up. I also can not see the share from my new WD TV Live Plus. I suspect the two problems are related.
I have disabled my firewall to insure that it is not in the way, but no change. I have set up samba users to match my XP users, and numerous other attempts at modifying smb.conf to get it to work, but to no avail.
Here is my smb.conf file--
# This is the main Samba configuration file. For detailed information about the
# options listed here, refer to the smb.conf(5) manual page. Samba has a huge
# number of configurable options, most of which are not shown in this example.
#
# The Official Samba 3.2.x HOWTO and Reference Guide contains step-by-step
[Code].....
I was able to connect to my XP home machine from downstairs F12 machine with gnome. I also have laptop with F12 but with xfce windows manager, following the same instruction, (wireless work fine) I don't see the network icon in the file manager. Can someone let me know how to trouble shoot?
View 12 Replies View RelatedI've done this before, maybe ten times. This time is different. I don't know why, but Samba will not allow any clients to connect.
I've done:
- installed samba
- setup the samba shares
- have a samba user/passwd
- authentication = users
- punched in the samba stuff for firewall
- workgroup is set right
What the heck? I cannot get any client to connect. Not even the server machine can connect to itself through a client. What am I missing here???
Just for the record, I'm trying to connect to \SERVER:
Code:
Code:
I removed a whole lot of comment lines in the config file.
I am running Jaunty 9.0.4. I used system-config-samba (gui) to configure Samba. I put myself as a user and tried to map the drive from my local PC. I am unable to map the drive. On windows, I try to connect using a different user and when I select finish, it prompts me again and adds my workgroup before my user name.
View 8 Replies View RelatedI have an Ubuntu server that's part of a Windows domain and requires Kerberos authentication when connecting to its Samba shares.I have an Ubuntu desktop machine that is capable of obtaining Kerberos tickets via kinit and can successfully connect to the Samba share on my Ubuntu server using Kerberos authentication via smbclient.
View 2 Replies View RelatedI am trying to setup Samba to connect to my NAS drive, so far I have it connecting but normal users only have read only access, this is what I have done so far
Code:
mkdir /media/Data
Fstab
Code:
//192.168.2.150/Data/media/Datasmbfsusername=username,password=password00
I know putting the username and password in the fstab is not the best, but to start with I am trying to get everything working.
what I need to do to give my normal users write access to the share?
I have a server running Ubuntu Server 10.04 that is a VirtualBox/Samba/SSH server. I have port forwarding set up for ports 22 and 3389 (SSH and RDP) and I want to access the Samba share without opening any other ports. I can connect to it from my internal network, but I want to be able to access it from school. My best guess would be to tunnel the Samba port through SSH, but I don't know how. I will be connecting to it from Ubuntu 10.10 Desktop.
View 9 Replies View RelatedHere is what I am trying to do. I set up a Samba server on Ubuntu 10.10, which seems to be working (sort of).
I set it up using Webmin, which has always worked for me before.
I set up two shares, both of which are read/write and are allowing any hosts. And are set up using the default samba configuration that is provided by Webmin.
For privacy reasons I won't disclose the domains, but I will call them test.abc.com and xyz.com
I set up /media/mount as a share called [mount_a] and I also set up /media/mount_b as [mount_b]
The server's host name in my internal network is mount-box
I originally mapped it to a sub-domain of my domain abc.com via DNS, so that test.abc.com resolves to the IP address of my router; which has all the necesarry port forwarding set up.
In windows explorer in the remote location I tested it by using \test.abc.compoonani_a, this works fine and after a password prompt I can access my files. However, I do not want to use this domain name for this server, so I registered a new domain name and again via DNS mapped domain xyz.com to the IP address of my router.
Since setting up the new hostname, I cannot connect to it via Windows to access the samba share. It just won't work. When I try to connect the password prompt appears and I put in my credentials, when I submit it the window re-appears and it has appended the servername xyz.com before the username, so it reads \xyz.com<myusername>, but won't let me connect.
If I try again with the previous hostname test.abc.com, it works fine.
What am I doing wrong that it would let me connect with one hostname, and not another.
We have Ubuntu Server for samba share. We have windows xp clients working perfectly as client station.However, we are facing problem in connecting ubuntu client. Can anyone guide me, how to connect ubuntu client to samba share. (Not as root user)
View 1 Replies View RelatedYesterday I reinstalled my ubuntu 11.04 and now I cant get samba to work. I allso installed Firestarter to get internet connection to my media center pc. In firestarter I have unchecked in the "advanced options" "block broadcast from external network".In my media center pc when I go network connection and view workgroup computer, I cant see my computer at all. If I try to ping my computer then everything is ok.
View 1 Replies View RelatedI'm looking for an easy guide to connect to my home network with Fedora 12. So far I did what I thought was pretty straight forward but I'm not seeing any computers. Here is what I've done
yum install samba
restart
system settings -> advanced -> samba
I set up my two paths that I wanted to be shared when I go to network in Dolphin I'm seeing Network, Network Services and Samba Shares If I click on Network nothing shows, same with Network services, samba shares shows nothing and the bottom reads "unable to find any workgroups on your local network. This might be caused by an enabled firewall"
There are two workgroups which my Ubuntu machine shows fine, workgroup and mshome, I can connect to my roomates and my girlfriends computer no problem within Ubuntu (they are running XP, Vista and Ubuntu).
i just installed zenwalk on another computer in my house (experimenting with zencafe as well) and i also installed the source code of samba directly from the website (i saw that the smbclient command wasn't there when i first installed zenwalk) i have a samba server that has ubuntu as its operating system and i would like to connect my zenwalk system to the shares so i can access them from that computer
i heard that smbclient is the way to go when you do something like this so i tried it a few times and nothing worked ps i am using webmin to configure samba on my ubuntu platform
I am setting up samba on my CentOS server for the first time. I am using webmin to configure samba. Here is the smb.conf
Code:
[global]
netbios name = KISKA
cups options = raw
load printers = yes
server string =
[code]...
I can see the domain name "KISKA" in the "network" tab of windows explorer, however when I click on it I get this error: Windows cannot access \KISKA check the spelling of the name. otherwise there might be a problem with your network. Under the details of this error I get this: "The network path was not found" Also I have stopped iptables so it cant be firewalled
After upgrading to FC12 from FC10 the 3 samba shares on the box cannot be connected to from either Windows-7 or Windows Server 2003R2. Both were working with FC10 just fine.
It is local authentication to the box not LDAP etc. Files below and error msg:
attempting to connect to say \saturngeorgek gets an error in a windows popup with Unknown username or bad password yet I'm certain of the ID & password as I can ssh in with it from Windows-7
In 2003 I see "Multiple connections to the same server or shared resource by the same user using more than one name are not allowed disconnect all previous connections and tr again."
In neither case do I have any connections to the saturn server that I can see using net use from either box.
smb.conf
========
[global]
workgroup = netwrx1
server string = Saturn RHFC4 Linux Server
[Code].....
I have just upgraded to FC 12 from FC 11 everything on FC 11 was fine, I has samba, openvpn, subversion, tinyproxy and apache all working fine. Friends could vpn in and do all the stuff they where allowed to do,
Now unfortunately I have this issue after upgrading to FC12, All the samba mounts have disappeared from all my friends computers, when I look at the log files I now see this;
smbd/server.c:457(smbd_open_one_socket)
smbd_open_once_socket: open_socket_in: Address already in use
I'm trying out Samba for the first time, the main directory is called "workplease", and I have 2 users, "keith" and "aspire". I set the permission on "workplease" to aspire by doing "chown aspire:aspire workplease". Then on my windows7 machine I can connect to the samba server using aspire login, see my "aspire" folder and the "workplease" folder, I can create txt files, folders ...ect
But I would like the user account "keith" to be able to read/write to the same "workplease" folder. I added both users to the group "networkg" by doing
"usermod -a -G networkg aspire"
"usermod -a -G networkg keith"
So my question is how can I make the folder "workplease" have permissions to let any group members of "networkg" read/write/execute anything they put in that folder, or sub folders? Im getting rid of my Windows Home Server , and trying to use samba to do the file sharing for my buddy and I.
edit: Seems doing "chmod 774 -R workplease" changes the permissions on all the files/subfolders, to give owner and group full access only, but is there a way anytime someone creates a txt file, or copies over an mp3 for example, it auto-maticly has 774 permission?
Last night i updated to 9.10, all good except i can no longer access my samba shares!!
here is the info from log.smbd after i stared it this afternoon
Code:
smbd version 3.4.0 started.
Copyright Andrew Tridgell and the Samba Team 1992-2009
[2010/01/12 16:35:57, 1] param/loadparm.c:6355(map_parameter)
Unknown parameter encountered: "executable"
[2010/01/12 16:35:57, 0] param/loadparm.c:7449(lp_do_parameter)
[Code]....
I am trying to connect to my samba server with xubuntu, so far with no luck.
I am trying to use fusesmb and have been following these instructions:
[URL]
as well as these:
[URL]
and these
[URL]
the top ones say to use Applications - System - shared folders to setup smb client. Xubuntu maverick doesn't seem to have that menu point. So I copied the smb.conf from my desktop machine. libsmbclient is installed.
fuse as such seems to run since teh folder that i designated as mount point (~/Network) changes owner to root when i run fusesmb Network. But apart from that nothing happens.
I have a problem with Samba. I've already configured my SMB.conf file, but I can't connect to my Windows shares by their host name. for example: if I try to connect to GDEA73-PC-1 share = netshare, server connection fails. if I try to connect to 192.168.1.171 then share = netshare, it works. How do I fix this? When I run findsmb, I am on the GDEA73 NETWORK workgroup as I configured, but my local PC is the only one on it...
View 2 Replies View Related