Debian :: BlueZ 4.60-1 Works Great And After A Week It Segfaults And Won't Start?
Apr 27, 2010
I have been using a ARM device with 512MB ram and flash to send messages via Bluetooth to everyone in the proximity. I am doing this with OpenProximity (Python) and it worked for the last week, it did stop for two times but since I didn't have time to find the cause, I just rebooted it (Windows style ) and it worked again, but suddenly it stopped working again last Saturday. When I did /etc/init.d/bluetooth restart it did not say it failed or something, but when I did /etc/init.d/bluetooth status it said "bluetooth is not running ... failed!". This is what I got in the syslog:
Code:
Apr 27 13:52:45 debian bluetoothd[31243]: Bluetooth daemon 4.60
Apr 27 13:52:45 debian bluetoothd[31243]: Starting SDP server
Apr 27 13:52:45 debian bluetoothd[31243]: Starting experimental netlink support
Apr 27 13:52:45 debian bluetoothd[31243]: Failed to find Bluetooth netlink family
Apr 27 13:52:45 debian bluetoothd[31243]: Failed to init netlink plugin
Apr 27 13:52:45 debian bluetoothd[31243]: Can't create GN bridge
[Code]...
You'll probably note that the first message is version 4.60 and the second one 4.63, this is because I tried to upgrade, but that did not work completely, but the error above is the same as first before the upgrade.
Don't know if it matters, but I am using Debian Squeeze and the output of uname -a is: Linux debian 2.6.32.2 #1 PREEMPT Fri Dec 18 22:54:28 MST 2009 armv5tel GNU/Linux. Hope someone know how this could happen suddenly, and even better, knows how to fix it
EDIT: Forgot to say, I am using a SENA Parani UD100 Bluetooth USB Adapter which uses the Toshiba Bluetooth stack.
UPDATE: It won't crash until the Bluetooth stick is inserted, so it should be a driver problem?
View 2 Replies
ADVERTISEMENT
Jul 21, 2010
I tried visiting the link in the sticky, to report this, but it was empty.
View 4 Replies
View Related
Jun 6, 2010
Cheese seems to work great OOB on my HP probook 4510s using the internal webcam and OpenSuSE11.1 (11.2/11.3.6 don't install). Anyway - I would really like to have a simple way to send either the video stream or periodic snapshots out over the internet, either to a website or a chat client or? I am going to be doing a field experiment and will want folks to be able to see what I'm doing. I have set up servers before and it can get way too complicated for the amount of time I have left to get this going..
View 2 Replies
View Related
Jul 15, 2010
i'm running ubuntu 8.04 with firefox 3.6.6 and the add-on shockwave flash 9.0 r277. my video works great at sites like videos, abcnews.com, and cbsnews.com. but it does not work at msnbc.com. i just get a blank, black panel with the label "msnbc.com video player" at the top.
the problem appears unique to the msnbc.com web site. any idea what it could be? i've used other machines running different versions of ubuntu and ff and have had no problems viewing msnbc.com video.
View 6 Replies
View Related
May 14, 2010
Ok, so eth0 is up and working great. eth1, however, comes up with a link light, however the packet counters in ifconfig remain at 0. Appears that eth1 isn't working.
Here's my setup:
-Dell latitude CPi laptop with 2 PCMCIA network cards and no built-in ethernet.
-Slackware v11
-eth0 is connected inside my router on my 192 network. Static address with good connectivity
-eth1 is connected on the other side of my router in promiscuous mode in order to listen to the traffic coming into my network.
Troubleshooting so far: I have switched the pcmcia cards between slots and regardless of which card is in eth0 or eth1, eth0 works and eth1 does not. I have also switched the card dongle between cards as well as the ethernet cabling between the cards. With any of the combinations eth0 works like a champ but eth1 does not, so I think I've ruled out hardware problems.
View 14 Replies
View Related
Nov 23, 2010
The problem I have is when I install 10.10 I get no wired connection my wifi works great, just no wired connection. I don't have WiFi where I am right now. It works fine when I run off the dvd , but when I install it i get nothing. I have tried static ip, reinstalling, reinstalling drivers. Don't know what else to do. I have a Dell Inspiron 1720. The ethernet is a broadcom 440x.
View 9 Replies
View Related
Feb 10, 2011
No Bootup just a Black Screen with a frozen cursor after install, but LIVE CD works in 1024x768 mode? Well, I have a Sony Bravia 32xTV with HDMI input coming out of a ZOTAC nvidia type of card. The live CD will recognize the HDMI graphics card and Sony TV/monitor and thus works like Ubuntu normally does. But when I go to install to a hard drive and try to boot up I get just a Black Screen with a frozen cursor. I even have another Ubuntu 8.04 version running on the Sony Bravia TV , so no problem with TV end of things. what do I do now, oh great Ubuntu gurus out there in cyberland? what could I possibly do , what do I read, where do I go , what, where, who, how, when ,which way?
View 9 Replies
View Related
Mar 5, 2011
Exactly as the topic says; running a MIDI file through Timidity in command-line works fine, but doing it in Rosegarden just outputs silence.
View 9 Replies
View Related
Apr 30, 2010
Using Lucid Lynx 10.04. Is your software center/ synaptic package manager working properly for you?
I just got Lucid installed after some minor troubles last night, but with the help of great people, I have it installed now (thank you!) and it all *ok, most* works beautifully!
However, I have been downloading/installing "Ubuntu restricted extras" , for the last 20 minutes now, and it is only at 12% .
In karmic koala, these things happened pretty quickly, but now it is just soooper slooooowww.
Before I started the restricted extras.. I installed VLC player, and that took about 15 minutes just for that. and now it is nowhere to be found!
It does not show in USC under installed software, nor does it show in synaptic..and it is in no menu, anywhere.
Speaking of synaptic...I cant get VLC, or Ubuntu restricted extras to show up, it does not 'find' them when I type their name into the search bar..it acts as if they don't exist.
I havent attempted to find, or install anything else that I had on my karmic box yet...only these 2 things, vlc and restricted extras....and both have been ..well.....painfully slow..... and vlc doesnt even seem to have installed, after it took 15-20 minutes, and said it was finished.
If this was "back to normal"...this would definitely be the best OS i have ever seen/used.
View 9 Replies
View Related
Jun 3, 2010
I have a Gateway ML6721 laptop that uses a Realtek RTL8187B for wireless comms. I am very new to Ubuntu and Linux. I am trying out linux using a usb stick, 16Gb with a 4Gb persistence. If I stay in the same room as the router there is no problem. If I walk too far, I get disconnected. Works fine in windows throughout the whole house. Is there a setting I can change or do I need to use a different driver?
View 3 Replies
View Related
Jun 14, 2010
been running Lucid & Karmic for a while now, after an update last week (with kernel) & reboot sound no longer works.Results of 'sudo aplay -l':
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC888 Analog [ALC888 Analog]
[code]....
View 3 Replies
View Related
Apr 20, 2011
Suse 11.3/Gnome 2.30.0
Evolution 2.30.1.2
I cannot get the monthly view to start the week on Sunday. The settings seem right but they don't stick. Restarting Evolution always defaults to a week start on Monday even though the defaults display Sunday. I've viewed the default settings the following two ways:
Within Evolution... Edit > Preferences > Calendar and Tasks > week starts on "Sunday"
GNOME Configuration editor.../apps/evolution/calendar/display/week_start_day = 0 (Sunday)
View 4 Replies
View Related
Apr 23, 2010
I've been switched to a new department at work and am totally clueless when it comes to scripting in bash. When I told them I was a fast learner, I didn't think they'd throw me into the deep end of the pool so fast. So to make a long story short. What is a great book to start learning scripting in bash? My supervisor already gave me a simple task to do. Conceptually it sounds quite easy in my head, but actually writing out a script is a bit more daunting and complexed than I first thought.
View 3 Replies
View Related
Mar 31, 2009
Bluez 4.34 Compile - Error...make[1]: Entering directory `/usr/src/bluez-4.34/audio'
./configure and make output.
View 15 Replies
View Related
Apr 19, 2016
Using jessie over 4.2.8 or 4.3.4 kernel.
Used both the default bluez package, 5.23 and building bluez 5.36 by hand.
hciconfig shows a good configuration,
hci0: Type: BR/EDR Bus: UART
BD Address: 78:A5:04:31:3C:4B ACL MTU: 1021:6 SCO MTU: 180:4
UP RUNNING
RX bytes:82105 acl:0 sco:0 events:1989 errors:0
TX bytes:516 acl:0 sco:0 commands:48 errors:0
hcidump -x does show Commands/Events received, beacons are being seen, and collected by our app.
> HCI Event: LE Meta Event (0x3e) plen 42
LE Advertising Report
ADV_IND - Connectable undirected advertising (0)
bdaddr F9:77:66:E8:F7:8B (Random)
Flags: 0x06
[Code] ....
However when the app tries to connect it always gets connection refused at gatt_connect.
gatttool behaves the same way, and hcidump does not show any connection attempts, implying no connection between gatttool and the device, although it is specified on the command line.
Finally although the bluetoothd is running bluetoothctl also shows no default controller found. I had edited /etc/bluetooth/uart.conf, adding an hciattach entry for the device but that changed nothing when restarting the bluetoothd. Entering a garbage entry into that file does not produce any errors, so I am not sure it is even being read.
Also systemctl|grep bluetooth shows :-
sys-devices-virtual-bluetooth-hci0-rfkill0.device loaded active plugged /sys/devices/virtual/bluetooth/hci0/rfkill0
sys-devices-virtual-bluetooth-hci0.device loaded active plugged /sys/devices/virtual/bluetooth/hci0
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
bluetooth.target loaded active active Bluetooth
/sys/devices/virtual/bluetooth/hci0/address shows the correct MAC, but /sys/subsystem/bluetooth/devices/hci0 does not exist, a post elsewhere indicated this was not a problem but that seems odd.
Is the uart.conf file still used([URL] .... would suggest yes) and if so is the format a full hciattach command or merely the hciattach parameters?
View 1 Replies
View Related
May 22, 2010
Would upgrading your cpu ( athlon xp 1700+ to 2600 or 3200 ) be something that causes segfaults ?
View 2 Replies
View Related
Nov 7, 2015
Starting around two weeks ago, Iceweasel began closing at unpredictable intervals for no apparent reason. When I ran it in GDB, it came up as a segfault, though the backtraces were different each time. It would even do this in safe mode, though it generally took longer. Icedove began doing the same thing around the same time.
So, I decided to reset my profile and start over. But now it's still segfaulting, even in safe mode.
A cursory use of memtester didn't turn up anything unusual.
Could it be some browser addon that is causing problems even when it's not activated?
If so, why is Icedove doing the same thing occasionally?
The biggest problem is that it's intermittent, so I would have to use my browser with a new profile for a long time before I could confirm that the problem is actually fixed.
View 2 Replies
View Related
Jul 8, 2010
Does anyone know if there is any Internet Cafe software a small internet cafe can run on Ubuntu that works great?
View 4 Replies
View Related
May 13, 2010
I am running kde 4.4 in virtualbox , but cannot create xorg.conf to get a correct resolution. X -configure = segfault. Older releases were fine - lenny, even ubuntu hardy / lucid.
View 6 Replies
View Related
Nov 11, 2010
I was using bluez-4.56 in an ARM based embedded product and was using PAN in NAP role. It was working fine.Few days back I tried using bluez-4.78, with the same CONF files that I had been using. However, the NAP refuses any PAN connection from the remote BT device.Before I go into details, I would like to just check if any of you guys also faced starting problems with PAN on bluez-4.78.
After some tracking and debugging I discovered that Bluez-4.67 works fine with the same setup as used for Bluez-4.56. However, luez-4.69 FAILS!! Bluez-4.68 seems to have some problem wherein the Bluetooth adapters are not even seen by our FW.So, something that changed for PAN between 4.67 and 4.69 seems to NOT work with the setup used for 4.67 and below. I see that NetworkServer is introduced in 4.69 onwards. If any Bluez developers out there OR some experts in Bluez PAN settings, how and what setup needs to be changed in Bluez-4.69 to make PAN profile work in NAP role?
Additional info: In Bluez-4.67 and below, our product publishes "Bluez GN Service", "Bluez-NAP Service", "Network Access Point" and "Serial Port" services. The same product built with Bluez-4.69 publishes only "Network Access Point" and "Serial Port" services !! The BT device on my laptop fails to connect to the "Network Access Point" service. Are there any basic setup changes that I need to do with bluez-4.78 as compared to bluez-4.56?
View 2 Replies
View Related
Apr 3, 2011
I am tiring to install bluez into AT91rm9200 board. Please would anybody help with what switches i should provide with ./configure.
I tried this /configure --host=armarm-unknown-linux-gnu configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used.
checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane. configure: error: newly created file is older than distributed files!Check your system clock
View 1 Replies
View Related
May 17, 2010
cvs -d :
It was directed to hit enter at the password prompt! Thers no space in between the : and P .. te space has been pt to avoid this..
View 4 Replies
View Related
May 4, 2010
I'm compiling the BlueZ packages on Slackware64-13.0 and bluez.Slackbuild failed to run. I added
Code:
mkdir -p $PKG/lib/udev
immediately before
Code:
cp -a scripts/bluetooth_serial $PKG/lib/udev/bluetooth_serial || exit 1
and now the script runs.I don't know why the /lib/udev directory isn't created earlier in the build process for me, but now it builds cleanly.
View 5 Replies
View Related
Jan 5, 2011
where syncml resides in bluez or how i can use syncml with bluez to synchronize my phone and desktop or how I can integrate syncml with bluez? which packages and application should be required?
View 3 Replies
View Related
Aug 23, 2010
I was trying to install bluez 4.69 for my bluetooth phone modem in my centos 5.5 and it says it needs glib 2.14 or above and then I downloaded glib 2.14 but no luck and tried glib 2.15 but same error.(My internet connection is through phone only so I cant use yum install so Im using another system running on windows and copying it to centos system)
View 1 Replies
View Related
Mar 26, 2010
I used to share my internet connection for my palm via bluetooth dund on opensuse 10.1. Now I upgraded to opensuse 11.2, and have been trying to configure the same for 5 hours, without success. The problem is: dund seems to be in bluez-utils, but this package does not seem to be available from the official opensuse 11.2 repo. It is available from an unofficial one, but that is version 3.x and it conflicts with the version 4.x package of bluez. So, I either have bluez 4.x or bluez-utils 3.x, whilst I would need both.
Is there a solution for this problem, or any other way to share internet via bluetooth? (All previous howtos seem to be rendered useless with the recent "developments" of bluez, but, hey, file sending to my palm still works to some extent, so, there is much room for more "developments" until bluetooth is rendered completely unuseable).
Edit: In a changelog at a RedHat site, I found that the bluez-utils package was integrated into the bluez package, and later some tools like dund were split out into a bluez-compat package. Maybe the same happened to bluez in opensuse, too. But I have both the bluez and the bluez-compat packages installed, and hcid and sdpd are nowhere. Where did they disappear during the very important re-organization of bluez tools?
Edit2: Kind of solved. Hcid was renamed to bluetoothd, and probably the other tools and config files changed names, too. Old howto's are in fact useless, and I am about to sacrifize my next days in order to become a blootooth expert just to configure this wrecked internet sharing.
View 2 Replies
View Related
Apr 10, 2010
I am using SUSE 11.2. And I am really baffled with a strange NFS problem.I have set up the fstab on the client and exports on the server correctly, because if I manually run # /etc/init.d/nfs startStarting NFS client services: sm-notify doneI can see and use the NFS partition perfectly, there is no problem at all.But nfs cannot successfully start at boot. In yast, I have enabled nfs in "System Services (Runlevel)" at runlevel 3 and 5. So it should run automatically, but I always get the following error message:
/var/log/message:
Apr 10 20:07:56 hubble kernel: [ 33.654768] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[code]....
View 9 Replies
View Related
Jan 11, 2011
I've got a Lenovo Thinkpad X201i. The problem I have is (since I've installed Xubuntu) every time I start up my laptop it just hangs with a little flashing white stripe in the top of the left corner (like every start up). Then when I shut down the laptop using the power button and start it up again it works. How can this be possible? On start up, it hangs, while on the restart it always works. Which means I have to restart my laptop every single time.
View 3 Replies
View Related
Sep 1, 2011
I've recently upgraded to Natty (11.04).The problem that is now occurring, and reoccurring, is like this:- Computer boots, but hangs on a purple screen (nothing on it). Nothing happens, after 15 minutes or so I give up waiting and hard reset.- Boot via Grub (holding shift) into recovery-mode: works fine, but I want the GUI, so I reboot.- After reboot the system hangs again, as mentioned before.- Hard reset again, and booting a previous kernel (2.6.32.8 ): works fine!- Restart again, boots in most recent kernel (2.6.38.10): works fine now.- Try to shutdown/restart again, problem re-occurs every time. So I use the workaround with the extra startup with the older kernel again.and finally typing this.
View 1 Replies
View Related
Sep 13, 2010
When I shutdown computer and start it up, eth0 doesn't seem to show up (though lspci sees ethernet card and modules are loaded). When i reboot (which is exactly the same, in my opinion), it works good. I'm using Sabayon GNU/Linux, Gnome Network Manager applet.
>uname -srm
Linux 2.6.34-sabayon x86_64
>sudo lspci | grep Ethernet
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 05)
View 2 Replies
View Related
