where syncml resides in bluez or how i can use syncml with bluez to synchronize my phone and desktop or how I can integrate syncml with bluez? which packages and application should be required?
View 3 RepliesI was trying to install bluez 4.69 for my bluetooth phone modem in my centos 5.5 and it says it needs glib 2.14 or above and then I downloaded glib 2.14 but no luck and tried glib 2.15 but same error.(My internet connection is through phone only so I cant use yum install so Im using another system running on windows and copying it to centos system)
View 1 Replies View RelatedIt's installed as a mobile broadband connection. Only works if my phone is plugged in during boot, otherwise plugging in my phone does nothing. For example, I booted my netbook earlier today but my phone wasn't plugged in. Tethering did not work, it just acts as if it isn't present. I rebooted (with my phone still attached) and now tethering magically works.
View 5 Replies View RelatedI have 2 machines, 1 Ubuntu 10.10 with LTSP installed on it that works great and 1 Windows 2003 Server where I have Terminal server running.I also have DLink DNS-232 NAS where I do regular backups.I would like to transfer Ubuntu's users Home folder and Windows User folder to my DLink NAS and use it from there. Or at least find the way to link my home folders to NAS so all the files stay on one place so that users can use it from both servers without running any sync software or waiting for files to sync.
View 3 Replies View RelatedI'd like to get sync between evolution and nokia E51 running. Following the instructions given in [URL]
Therefore I need the plugin syncml-obex-client, but I cannot get it. I guess the problem is the that the package opensync-plugin-syncml cannot be downloaded.
Is it not part in ubuntu 10.04 anymore?
kam@kam-laptop:~$ sudo aptitude install multisync-tools opensync-plugin-evolution opensync-plugin-syncml libsyncml-utils
[sudo] password for kam:
Reading package lists... Done
[Code]....
Due to recent releases of Ubuntu/Kubuntu/Mint/Mint KDE, I'm pretty near ready to take the plunge full time into Linux on my main desktop machine. Just one thing stopping me though at the moment... folder synchronization.
I have the following setup:
1) Desktop machine running Mint KDE or Gnome hard wired to a Netgear DG834GT router.
2) Archived files stored on a dedicated partition mounted as /home/lucas/archive.
3) Laptop running Windows 7 also hard wired to the router.
4) Shared folder on the Windows 7 laptop called "Archive" on a dedicated "Data" partition.
What I would like to do is synchronize the folder specified in 2 above to the shared folder specified in 4 above.
In Windows I use SyncBackPro to synchronize folders. Is there anything similar in Linux?
I am currently using Ubuntu 10.04 64bit. I am having trouble transferring files from my LG GR500 phone to my Ubuntu desktop. I bought a micro-usb to usb charger and data transfer cable, but the only thing that is working is the charging.I could not find any solutions for Ubuntu or Windows XP. If anyone has an idea as to how I can get pictures or other files off my phone.
View 1 Replies View RelatedI'm trying to synchronize a client with an ntpdate server. The ntp.conf file from the server has the following lines: # /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for
driftfile /var/lib/ntp/ntp.drift
# Enable this if you want statistics to be logged.
#statsdir /var/log/ntpstats/
statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
[Code]...
My bluetooth doesn't seem to be working,and ubuntu recognises the inernet(i mean connected to the computer by cable)but mozzilla doesn't seem to be surfing the net),and it doesnt detect wireless signals at all.I'm new to ubuntu,it works in windows so theres no internet p[roblem,and my bluetooth is fine in windows,ubuntu doesnt seem to recognise my phone or desktop at all.And how do you move file freely like drag drop save as?Is there any other way other than those terminal commands?thanx ubuntu version 10.4.Some one told me i should configure some DHCP,i have absolutely no idea of what it is( for internet)
View 1 Replies View Relatedinstalling the software BluePad, which allows a user to control their desktop environment with a Java-enabled mobile phone. I am still adjusting to Fedora (and some other Linux distros) from Windows and I am unfamiliar with installing and executing software programs. Also, if you could also include any pre-requirements involved in the installation..
View 3 Replies View RelatedI have a mobile phone (T68i) attached to my server and everything works fine. But sometimes the phone craches and needs to be rebooted wich is quite annoying.So I want to use a newer phone that is not 10+ years old :-)But when using a K610i or C702 the phone does not appear on /dev/ttyUSB0 as expected.When inserting the usb cable a dmesg gives this:
Code:
[5924924.451033] usb 1-3: new high speed USB device using ehci_hcd and address 19
[5924924.576728] usb 1-3: New USB device found, idVendor=0fce, idProduct=d0d9
[code]....
I was using bluez-4.56 in an ARM based embedded product and was using PAN in NAP role. It was working fine.Few days back I tried using bluez-4.78, with the same CONF files that I had been using. However, the NAP refuses any PAN connection from the remote BT device.Before I go into details, I would like to just check if any of you guys also faced starting problems with PAN on bluez-4.78.
After some tracking and debugging I discovered that Bluez-4.67 works fine with the same setup as used for Bluez-4.56. However, luez-4.69 FAILS!! Bluez-4.68 seems to have some problem wherein the Bluetooth adapters are not even seen by our FW.So, something that changed for PAN between 4.67 and 4.69 seems to NOT work with the setup used for 4.67 and below. I see that NetworkServer is introduced in 4.69 onwards. If any Bluez developers out there OR some experts in Bluez PAN settings, how and what setup needs to be changed in Bluez-4.69 to make PAN profile work in NAP role?
Additional info: In Bluez-4.67 and below, our product publishes "Bluez GN Service", "Bluez-NAP Service", "Network Access Point" and "Serial Port" services. The same product built with Bluez-4.69 publishes only "Network Access Point" and "Serial Port" services !! The BT device on my laptop fails to connect to the "Network Access Point" service. Are there any basic setup changes that I need to do with bluez-4.78 as compared to bluez-4.56?
I am running K/Ubuntu 9.10 with an HTC Hero (CDMA) running Android 1.6.
I would like to be able to stream media from my PC to my phone. Much like what gMote does but you can play it on your phone and not just navigate.
Also, does anyone know a good way to upgrade my HTC Hero (CDMA) to 2.1?
Bluez 4.34 Compile - Error...make[1]: Entering directory `/usr/src/bluez-4.34/audio'
./configure and make output.
I am tiring to install bluez into AT91rm9200 board. Please would anybody help with what switches i should provide with ./configure.
I tried this /configure --host=armarm-unknown-linux-gnu configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used.
checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane. configure: error: newly created file is older than distributed files!Check your system clock
cvs -d :
It was directed to hit enter at the password prompt! Thers no space in between the : and P .. te space has been pt to avoid this..
I'm compiling the BlueZ packages on Slackware64-13.0 and bluez.Slackbuild failed to run. I added
Code:
mkdir -p $PKG/lib/udev
immediately before
Code:
cp -a scripts/bluetooth_serial $PKG/lib/udev/bluetooth_serial || exit 1
and now the script runs.I don't know why the /lib/udev directory isn't created earlier in the build process for me, but now it builds cleanly.
I have been using a ARM device with 512MB ram and flash to send messages via Bluetooth to everyone in the proximity. I am doing this with OpenProximity (Python) and it worked for the last week, it did stop for two times but since I didn't have time to find the cause, I just rebooted it (Windows style ) and it worked again, but suddenly it stopped working again last Saturday. When I did /etc/init.d/bluetooth restart it did not say it failed or something, but when I did /etc/init.d/bluetooth status it said "bluetooth is not running ... failed!". This is what I got in the syslog:
Code:
Apr 27 13:52:45 debian bluetoothd[31243]: Bluetooth daemon 4.60
Apr 27 13:52:45 debian bluetoothd[31243]: Starting SDP server
Apr 27 13:52:45 debian bluetoothd[31243]: Starting experimental netlink support
Apr 27 13:52:45 debian bluetoothd[31243]: Failed to find Bluetooth netlink family
Apr 27 13:52:45 debian bluetoothd[31243]: Failed to init netlink plugin
Apr 27 13:52:45 debian bluetoothd[31243]: Can't create GN bridge
[Code]...
You'll probably note that the first message is version 4.60 and the second one 4.63, this is because I tried to upgrade, but that did not work completely, but the error above is the same as first before the upgrade.
Don't know if it matters, but I am using Debian Squeeze and the output of uname -a is: Linux debian 2.6.32.2 #1 PREEMPT Fri Dec 18 22:54:28 MST 2009 armv5tel GNU/Linux. Hope someone know how this could happen suddenly, and even better, knows how to fix it
EDIT: Forgot to say, I am using a SENA Parani UD100 Bluetooth USB Adapter which uses the Toshiba Bluetooth stack.
UPDATE: It won't crash until the Bluetooth stick is inserted, so it should be a driver problem?
I used to share my internet connection for my palm via bluetooth dund on opensuse 10.1. Now I upgraded to opensuse 11.2, and have been trying to configure the same for 5 hours, without success. The problem is: dund seems to be in bluez-utils, but this package does not seem to be available from the official opensuse 11.2 repo. It is available from an unofficial one, but that is version 3.x and it conflicts with the version 4.x package of bluez. So, I either have bluez 4.x or bluez-utils 3.x, whilst I would need both.
Is there a solution for this problem, or any other way to share internet via bluetooth? (All previous howtos seem to be rendered useless with the recent "developments" of bluez, but, hey, file sending to my palm still works to some extent, so, there is much room for more "developments" until bluetooth is rendered completely unuseable).
Edit: In a changelog at a RedHat site, I found that the bluez-utils package was integrated into the bluez package, and later some tools like dund were split out into a bluez-compat package. Maybe the same happened to bluez in opensuse, too. But I have both the bluez and the bluez-compat packages installed, and hcid and sdpd are nowhere. Where did they disappear during the very important re-organization of bluez tools?
Edit2: Kind of solved. Hcid was renamed to bluetoothd, and probably the other tools and config files changed names, too. Old howto's are in fact useless, and I am about to sacrifize my next days in order to become a blootooth expert just to configure this wrecked internet sharing.
What do I need to tether my phone with Ubuntu? I've tried using Berry4All but there's no conf file for my carrier, and I don't know how to create one.I have my carrier's APN and the number to dial, other than that do I need any extra info? Is there another software that I can use to tether my BB?
View 5 Replies View RelatedUsing jessie over 4.2.8 or 4.3.4 kernel.
Used both the default bluez package, 5.23 and building bluez 5.36 by hand.
hciconfig shows a good configuration,
hci0: Type: BR/EDR Bus: UART
BD Address: 78:A5:04:31:3C:4B ACL MTU: 1021:6 SCO MTU: 180:4
UP RUNNING
RX bytes:82105 acl:0 sco:0 events:1989 errors:0
TX bytes:516 acl:0 sco:0 commands:48 errors:0
hcidump -x does show Commands/Events received, beacons are being seen, and collected by our app.
> HCI Event: LE Meta Event (0x3e) plen 42
LE Advertising Report
ADV_IND - Connectable undirected advertising (0)
bdaddr F9:77:66:E8:F7:8B (Random)
Flags: 0x06
[Code] ....
However when the app tries to connect it always gets connection refused at gatt_connect.
gatttool behaves the same way, and hcidump does not show any connection attempts, implying no connection between gatttool and the device, although it is specified on the command line.
Finally although the bluetoothd is running bluetoothctl also shows no default controller found. I had edited /etc/bluetooth/uart.conf, adding an hciattach entry for the device but that changed nothing when restarting the bluetoothd. Entering a garbage entry into that file does not produce any errors, so I am not sure it is even being read.
Also systemctl|grep bluetooth shows :-
sys-devices-virtual-bluetooth-hci0-rfkill0.device loaded active plugged /sys/devices/virtual/bluetooth/hci0/rfkill0
sys-devices-virtual-bluetooth-hci0.device loaded active plugged /sys/devices/virtual/bluetooth/hci0
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
bluetooth.target loaded active active Bluetooth
/sys/devices/virtual/bluetooth/hci0/address shows the correct MAC, but /sys/subsystem/bluetooth/devices/hci0 does not exist, a post elsewhere indicated this was not a problem but that seems odd.
Is the uart.conf file still used([URL] .... would suggest yes) and if so is the format a full hciattach command or merely the hciattach parameters?
if anyone knows of a way to be able to console in to a cell phone? I'm guessing it may be different from one cell phone to the next, but I want to console into my phone, and ftp, or tftp a copy of the OS onto my computer, and try to maybe use gedit or nano to look at the code, and play around with it. I'd like to see where the e911 code is, and create some kind of script that would alert me whenever that gps feature that is available to the cellular providers and the government.
since Americans are required to have a cell phone that is GPS capable, I would like to know if that ever gets activated. Additionally, I would also like to write scripts that would alert me if my microphone is activated.Maybe this is only possible on Droid phones since they are Unix based? Either way, you can readily buy usb cables to connect your phone to your pc to transfer pics, videos, etc. Maybe there is a way to run nmap on that cable connection to find a way to hack in?
I have a dell precision m4300 laptop with a 360 wireless bluetooth dell adapter On my system there is a debian lenny with kde3 and backported enable(everythings is p to date except bluez-utils and bluetooth holded at version 3.36-3)
Nowadays bluetooth more less works fine, I can send and receive single file to/from my phone (nokia n70)
The hell begin when I try to browse my phone files from konqueror...with bluetooth:/ I can see the list of all the device near me with sdp://[address]/ i can see two icons (obex file transfer & obex object push)
but I cant see or access to any file or folder into the phone.
I also try to update my bluez-utils to 4.60-1~bpo50+1 but in this case kbluetooth totally fail and a see the contextual menu of the system tray icon all disaled.
I can't use Internet with BSNL Clarity II A phone in ubuntu 9.10.I am a new user.Expect detailed step by step narration .
View 1 Replies View RelatedJust found this I haven't tried it but going to give it a go.
[URL]
What I currently do is run this script -
Code:
rfcomm release 0
CHANNEL = `sdptool search --bdaddr=00:21:FE:A5:C9:4A dun | grep Channel | cut -c14`
rfcomm bind 0 00:21:FE:A5:C9:4A ${CHANNEL}
wvdial e71bt
And my /etc/wvdial.conf is configured for AT&T connection here in the US.
Question is, is there anyway I can integrate it with NetworkManager, instead of having to run this script?
There's a "Broadband" option on NetworkManager, but I am not able to get it to recognize my cell phone as a modem. The bluetooth applet only allows for file transfer
I have a Nokia phone i want to connect it to internet through my PC.
how to do that ?
I have an iphone, I am trying to get internet connectivity to that phone through wifi. I dont have a wifi router. But i do have a laptop with wifi card. I am connecting to internet via cable modem. In win7 I used to create an accesspoint and do the ics from ethernet card to share via wifi card. It used to work perfectly.
Now as I am sing ubuntu, i want to do the same. I have intalled firestarter, and shared the internet connection through wifi card(wlan0).After this I created an accesspoint using the gnome network applet. Now i can connect my ifone to ths accesspoint. But there is no internet connectivity in my fone.
I heard it possible to make a call from a pstn phone through the internet to a pstn phone elsewhere in the world. The caller pstn phone connects to something called a pbx[dunno what it is] and a linux box running some software[dunno what it is either] connects to the internet.How do I make that work?
View 5 Replies View RelatedI have a Samsung phone (S3310) and I'm trying use it as a modem to access the net on 10.04. I set up a Mobile broadband connection (under network connections) and I'm pretty sure the settings are correct because it works on a Nokia phone with the same service provider.
When I plug in my Data Cable and set it to Samsung PC Studio mode, my phone isn't detected as a modem. I just tried wvdialconf and it says "No modem detected". I'm guessing that maybe I'm missing some drivers here. what I can do get the phone detected as a modem.