Hardware :: Install Bluez On At91rm9200?
Apr 3, 2011
I am tiring to install bluez into AT91rm9200 board. Please would anybody help with what switches i should provide with ./configure.
I tried this /configure --host=armarm-unknown-linux-gnu configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used.
checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane. configure: error: newly created file is older than distributed files!Check your system clock
View 1 Replies
ADVERTISEMENT
Aug 23, 2010
I was trying to install bluez 4.69 for my bluetooth phone modem in my centos 5.5 and it says it needs glib 2.14 or above and then I downloaded glib 2.14 but no luck and tried glib 2.15 but same error.(My internet connection is through phone only so I cant use yum install so Im using another system running on windows and copying it to centos system)
View 1 Replies
View Related
Apr 17, 2011
I want to build an object code for ARM at91rm9200 board from a Makefile using a crosscompiler.
View 4 Replies
View Related
Nov 11, 2010
I was using bluez-4.56 in an ARM based embedded product and was using PAN in NAP role. It was working fine.Few days back I tried using bluez-4.78, with the same CONF files that I had been using. However, the NAP refuses any PAN connection from the remote BT device.Before I go into details, I would like to just check if any of you guys also faced starting problems with PAN on bluez-4.78.
After some tracking and debugging I discovered that Bluez-4.67 works fine with the same setup as used for Bluez-4.56. However, luez-4.69 FAILS!! Bluez-4.68 seems to have some problem wherein the Bluetooth adapters are not even seen by our FW.So, something that changed for PAN between 4.67 and 4.69 seems to NOT work with the setup used for 4.67 and below. I see that NetworkServer is introduced in 4.69 onwards. If any Bluez developers out there OR some experts in Bluez PAN settings, how and what setup needs to be changed in Bluez-4.69 to make PAN profile work in NAP role?
Additional info: In Bluez-4.67 and below, our product publishes "Bluez GN Service", "Bluez-NAP Service", "Network Access Point" and "Serial Port" services. The same product built with Bluez-4.69 publishes only "Network Access Point" and "Serial Port" services !! The BT device on my laptop fails to connect to the "Network Access Point" service. Are there any basic setup changes that I need to do with bluez-4.78 as compared to bluez-4.56?
View 2 Replies
View Related
Mar 31, 2009
Bluez 4.34 Compile - Error...make[1]: Entering directory `/usr/src/bluez-4.34/audio'
./configure and make output.
View 15 Replies
View Related
May 17, 2010
cvs -d :
It was directed to hit enter at the password prompt! Thers no space in between the : and P .. te space has been pt to avoid this..
View 4 Replies
View Related
May 4, 2010
I'm compiling the BlueZ packages on Slackware64-13.0 and bluez.Slackbuild failed to run. I added
Code:
mkdir -p $PKG/lib/udev
immediately before
Code:
cp -a scripts/bluetooth_serial $PKG/lib/udev/bluetooth_serial || exit 1
and now the script runs.I don't know why the /lib/udev directory isn't created earlier in the build process for me, but now it builds cleanly.
View 5 Replies
View Related
Jan 5, 2011
where syncml resides in bluez or how i can use syncml with bluez to synchronize my phone and desktop or how I can integrate syncml with bluez? which packages and application should be required?
View 3 Replies
View Related
Apr 27, 2010
I have been using a ARM device with 512MB ram and flash to send messages via Bluetooth to everyone in the proximity. I am doing this with OpenProximity (Python) and it worked for the last week, it did stop for two times but since I didn't have time to find the cause, I just rebooted it (Windows style ) and it worked again, but suddenly it stopped working again last Saturday. When I did /etc/init.d/bluetooth restart it did not say it failed or something, but when I did /etc/init.d/bluetooth status it said "bluetooth is not running ... failed!". This is what I got in the syslog:
Code:
Apr 27 13:52:45 debian bluetoothd[31243]: Bluetooth daemon 4.60
Apr 27 13:52:45 debian bluetoothd[31243]: Starting SDP server
Apr 27 13:52:45 debian bluetoothd[31243]: Starting experimental netlink support
Apr 27 13:52:45 debian bluetoothd[31243]: Failed to find Bluetooth netlink family
Apr 27 13:52:45 debian bluetoothd[31243]: Failed to init netlink plugin
Apr 27 13:52:45 debian bluetoothd[31243]: Can't create GN bridge
[Code]...
You'll probably note that the first message is version 4.60 and the second one 4.63, this is because I tried to upgrade, but that did not work completely, but the error above is the same as first before the upgrade.
Don't know if it matters, but I am using Debian Squeeze and the output of uname -a is: Linux debian 2.6.32.2 #1 PREEMPT Fri Dec 18 22:54:28 MST 2009 armv5tel GNU/Linux. Hope someone know how this could happen suddenly, and even better, knows how to fix it
EDIT: Forgot to say, I am using a SENA Parani UD100 Bluetooth USB Adapter which uses the Toshiba Bluetooth stack.
UPDATE: It won't crash until the Bluetooth stick is inserted, so it should be a driver problem?
View 2 Replies
View Related
Mar 26, 2010
I used to share my internet connection for my palm via bluetooth dund on opensuse 10.1. Now I upgraded to opensuse 11.2, and have been trying to configure the same for 5 hours, without success. The problem is: dund seems to be in bluez-utils, but this package does not seem to be available from the official opensuse 11.2 repo. It is available from an unofficial one, but that is version 3.x and it conflicts with the version 4.x package of bluez. So, I either have bluez 4.x or bluez-utils 3.x, whilst I would need both.
Is there a solution for this problem, or any other way to share internet via bluetooth? (All previous howtos seem to be rendered useless with the recent "developments" of bluez, but, hey, file sending to my palm still works to some extent, so, there is much room for more "developments" until bluetooth is rendered completely unuseable).
Edit: In a changelog at a RedHat site, I found that the bluez-utils package was integrated into the bluez package, and later some tools like dund were split out into a bluez-compat package. Maybe the same happened to bluez in opensuse, too. But I have both the bluez and the bluez-compat packages installed, and hcid and sdpd are nowhere. Where did they disappear during the very important re-organization of bluez tools?
Edit2: Kind of solved. Hcid was renamed to bluetoothd, and probably the other tools and config files changed names, too. Old howto's are in fact useless, and I am about to sacrifize my next days in order to become a blootooth expert just to configure this wrecked internet sharing.
View 2 Replies
View Related
Apr 19, 2016
Using jessie over 4.2.8 or 4.3.4 kernel.
Used both the default bluez package, 5.23 and building bluez 5.36 by hand.
hciconfig shows a good configuration,
hci0: Type: BR/EDR Bus: UART
BD Address: 78:A5:04:31:3C:4B ACL MTU: 1021:6 SCO MTU: 180:4
UP RUNNING
RX bytes:82105 acl:0 sco:0 events:1989 errors:0
TX bytes:516 acl:0 sco:0 commands:48 errors:0
hcidump -x does show Commands/Events received, beacons are being seen, and collected by our app.
> HCI Event: LE Meta Event (0x3e) plen 42
LE Advertising Report
ADV_IND - Connectable undirected advertising (0)
bdaddr F9:77:66:E8:F7:8B (Random)
Flags: 0x06
[Code] ....
However when the app tries to connect it always gets connection refused at gatt_connect.
gatttool behaves the same way, and hcidump does not show any connection attempts, implying no connection between gatttool and the device, although it is specified on the command line.
Finally although the bluetoothd is running bluetoothctl also shows no default controller found. I had edited /etc/bluetooth/uart.conf, adding an hciattach entry for the device but that changed nothing when restarting the bluetoothd. Entering a garbage entry into that file does not produce any errors, so I am not sure it is even being read.
Also systemctl|grep bluetooth shows :-
sys-devices-virtual-bluetooth-hci0-rfkill0.device loaded active plugged /sys/devices/virtual/bluetooth/hci0/rfkill0
sys-devices-virtual-bluetooth-hci0.device loaded active plugged /sys/devices/virtual/bluetooth/hci0
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
bluetooth.target loaded active active Bluetooth
/sys/devices/virtual/bluetooth/hci0/address shows the correct MAC, but /sys/subsystem/bluetooth/devices/hci0 does not exist, a post elsewhere indicated this was not a problem but that seems odd.
Is the uart.conf file still used([URL] .... would suggest yes) and if so is the format a full hciattach command or merely the hciattach parameters?
View 1 Replies
View Related
May 3, 2010
why I get a symbol lookup error in hciconfig from the latest Bluez package in Slackware64-current. After installing and reinstalling the Slackware package I decided to try to compile the source from URL... After running ./configure and make I noticed that in the tools/.libs directory there was hciconfig and lt-hciconfig. hciconfig produces the same output as hciconfig from the Slackware package but lt-hciconfig does not. Anybody know what the difference is between these two programs?
View 3 Replies
View Related
Jan 30, 2011
I tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
View 3 Replies
View Related
Feb 2, 2011
Tried to install Gnome after the minimal server (console based) install.I would like to install a graphical GUI now What to do? wich packages? tried zypper gnome-desktop (or something similar) but it wasn't enough.
View 3 Replies
View Related
Jun 14, 2010
If I install the factory release now, can I easily convert my system to a normal 11.3 point release later, after 11.3 is out? If so, how would I do it? (11.2 has an issue that affects me. It's fixed in 11.3 already, so I have to use 11.3 if I'm going to use openSUSE.)
View 4 Replies
View Related
Jul 18, 2010
In /var/log/warn I can see :Code:Jul 18 19:29:41 Linux1 SuSEfirewall2: Warning: config 'vsftpd' not available I did install vsftpd, but I removed it and install pure-ftpd instead.
View 6 Replies
View Related
Apr 18, 2010
i have a backtrack install that i would like to keep while installing suse for an everyday OS; i start the install process but when it gets to partitioning the hard drive, it doesnt seem to recognize anything already being on there; it just gives me the setup for suse, ie:
sda1 ext3 = OS sda2 or sda5 = swap. do i have to configure a partition scheme? i installed ubuntu on a desktop alongside windows very easily due to grub graphical install/partition; is there not a similar function for suse?
View 6 Replies
View Related
Jan 7, 2011
I have installed openSUSE 11.3 on a couple of computers here at work, one 64bit one 32. I always install choosing KDE as the desktop and installed Gnome once the OS install is complete. Now when I go into YAST2 and select the gnome and I get the following. pattern:gnome-11.3-22.1.i586 requires patterns-openSUSE-gnome, but ths requirement cannot be provided
[Code]...
And the 64 version say the say but with x86_64 instead of i586. I have been on 11.3 for a month now and the systems are fully updated. I do not want to uninstall KDE and I do not want to break patterns. Does anyone know how to fix this?
View 3 Replies
View Related
Nov 7, 2010
I have a major problem installing opensuse 11.3 on my computer( hp pavilion dv6).I downloaded openSUSE-11.3-GNOME-LiveCD-x86_64 from software.opensuse.org: Download openSUSE 11.3 and made a live usb.I'm a newbie at using linux infact i never used another operating system beside windows.Now i have installed windows 7 (on c disk 100gb).My first problem when i am trying to install opensuse is that he dosn't automatic choose to make my partitions so i have to do it manualy.I was searching how to make it the best way so i desited to make 4 partitons one for ' /boot' one for ' / 'one for '/home' and a swap partition/In windows7 i made 4 new partitons
3:10 gb for /boot
4:10 gb for/
5:70 gb for /user
6:10 gb for /swap
My first question is :Is this right to make 4 paritions in windows (opensuse can't format or resize my partitions it just can edit it ) so it's my only way to make partitions( If this is wrong how can i make partitions then)
My second question is how to change the bootloader configurtation because everytime when ii try to install opensuse it stops at about 96% and it says to reconfigure the bootloader options.
If i skip this i get the folowing message
=== System Checking ===
Checking for /usr/bin/chroot binary... Passed
Checking for chroot directory /mnt... Passed
Checking for chroot directory content (bin
boot
Checking for binary /mnt/bin/ls... Passed
Trying to chroot... Failed
This is worth reporting a bug at url.
View 9 Replies
View Related
Apr 10, 2011
Whats better partition based install or LVM based install?Does one perform better than the other?I have a 640 gig drive.I have win 7 installed on a 360 gig partition.The remaining space is free.
View 4 Replies
View Related
May 11, 2010
I have 40gb of hd and I want Xp and fedora on it. I installed Xp first and now I want to install Fedora 12, every time I chose the space to iinstalll it, it says that there is no enough space to install it, although the xp just took less than 2gb of the disk. How can I resize it so that there is enough space?
View 8 Replies
View Related
Dec 14, 2009
I'm trying to install some wireless drivers, but apparently I don't have a /lib/modules/<kernel>/build directory, which is causing the Makefile to throw an error. Is there a specific place I should point the Makefile at?
View 9 Replies
View Related
Sep 14, 2010
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies
View Related
Mar 14, 2011
Since I've installed opensuse 11.4 instead of 11.3, I cannot install .rpm packages nor execute updates. I get the following message: "There has been a (probably temporarily) when connecting to the software source/repository" (own translation) details: Media source [URL] does not contain the desired medium So, probably there is something wrong with my software sources. Could anyone give a suggestion to repair this since I'm not a linux expert and would like to install new software on my newly updated machine.
View 9 Replies
View Related
Apr 27, 2011
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
View 9 Replies
View Related
Jun 11, 2011
I am trying to install PDFedit however after un-zipping and running configure at the end i get this message:checking whether we want to prepare pdfedit-core-dev package... no checking whether we want to build PDFedit gui... yes configure: error: QTDIR environment variable must be set
View 4 Replies
View Related
Sep 7, 2011
I am trying to install openSUSE 64 bit with KDE on my netbook and I am having some issues. I can't get the install started. I tried creating a live usb by using the SUSE Studio Image Writer, but I get an error saying: Exception caught during write: ystem.ComponentModel.Win32Exception: Access is deniedat ImageWriter.DriveAccess.Write(Byte[] buffer, UInt32 len)at ImageWriter.MainWindow.WriteToDisk()(This happens when I try to make the usb)I tried Googling it but I couldn't find anything so I tried creating a live usb using UNetbootin but when I boot from the usb, I get an error saying: Could not find kernel image: gfxboot.I have a 2 gb usb with FAT file format. Also I am only in High School, I want to try out different Linux distros so tell me if I did something wrong.
View 3 Replies
View Related
Sep 25, 2010
I have an apparently stable installation of Xubuntu that I've hand-tweaked in a few ways. I'd like to be able to reinstall this system verbatim on this machine should a disk crash happen, etc.Is there a "standard" method to create an install and/or total-backup CD that would be an instantiation of the currently-installed-and-modified system?
View 1 Replies
View Related
Jan 12, 2011
I am installing Ubuntu Server 10.10 on and old Dell Laptop. The network connection is an Xircom PCMCIA card.During install, the computer sees and interacts via the network just fine. For example, I can ping the gateway. Also, the command "lspcmcia" works and show the Xircom card.When I reboot, however, there is no network access, and the "lspcmcia" command is not there. When I try "lspcmcia" the OS helpfully tells me that I can "apt-get" pcmciautils, but, without network access, that fails.I tried adding the install cdrom to apt using "apt-cdrom" and then tried to "apt-get" pcmciautils and it got further, installing some dependencies, but acted like it still was unable to locate the pcmciautils package.
View 1 Replies
View Related
Aug 11, 2011
Trying to install Ubuntu (tried several releases) on HP Pavillion Pentium 4 Proccessor 515 2.93 Gig 1M L2 cache 533mhz 90nm . Have 1 gig ram and 1Tb hd. Hangs on initial install screen for ever. Tried versions from 8.10 (origional disk) to 11.01. Machine works perfectly on Windows XP but who wants that? The model is pavillion 1000 system number pl397aa.
View 7 Replies
View Related
