That PoS called "gadmin-proftpd" does.NOT.work in debian stable and I don't believe it will ever work. Is there an alternative GUI for configuring proftpd or it has to be done in text mode?
View 2 RepliesI recently reinstalled my server, a Dell PowerEdge 1650 (well it works...., 'sides for what I want to do with it it's more then strong enough.) got debian on it, and then specifically Lenny. works great exept for one thing: Gadmin-ProFTPd.when I try to start it using SSH (which I always use to administrate my server) I get only this as a error: segmentation error I just noticed, that durning startup it already displays a error, mainly this: starting ftp server: proftp[ 77.535939] warning: 'proftp' uses 32-bit capabilities (legacy support in use)
- warning: unable to determen ip address of 'server01.locals_foxofinfinety_com'
- error: no valid server configured
- fatal: error processing configuration file '/etc/proftpd/proftpd.conf' failed!afther that is starts atd, cron and apache and further works............
Whenever I try to click Activate it just sits there for a moment and stays deactivated..
View 2 Replies View RelatedI want to set up a ftp site for a few buddies to grab some files from me but I have no clue how to install this gadmin-proftpd-0.4.0. It shows a gui so how do I get that I am currently running ubuntu 10.04 w 3gb ram w a amd 9850 2.5ghz cpu on my server.
View 7 Replies View RelatedI'm running Ubuntu 10.4 Lucid Lynx and I am setting up gadmin-Proftpd and when I try and activate it. I get the following message and am really unsure where to go from here:
- notice: unable to bind to Unix domain socket at '/var/run/proftpd/test.sock': No such file or directory
- notice: unable to listen to local socket: Operation not permitted
- Fatal: TLSRSACertificateFile: '/etc/gadmin-proftpd/certs/cert.pem' does not exist on line 56 of '/etc/proftpd/proftpd.conf'
I couldn't get GADMIN-PROFTPD to activate so I activated it using sudo /etc/init.d/proftpd start Now when I have proftpd started from the terminal command line and go to [URL] in firefox I get a white browser window but no directory listings without any promtp for a username or password (192.168.1.100 being my internal LAN server IP address) Can you tell me what I am doing wrong with the below config?
[Code]......
I cant figure out why my server running fc14 keeps saying login incorrect 530. I am using gproftpd. I know that the login is correct though. For instance:
Lets say my user is "goober" and my pass is "fedora" and I go and type that in when I try and login to the ftp it says login incorrect.
I am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".
It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.
I rent a dedicated virtual server (ve) from Media Temple. It is one of those servers where they give you the base OS install and then you have to install all of your own applications.
Anyways, setting up the FTP software for the server has been hell. I am using ProFTPd and Webmin 1.510. I am able to log into the FTP and upload files to any of the directories that I have created.
The issue here is that I cannot download anything from my server via FTP. I have tried multiple clients (Filezilla is what I use normally), but they all come back with "Transfer cannot be started".
I've been working on the setup of a FTP server on my Debian system for the whole afternoon. But I can't get it straight! Normally I get it working in just a second, but it's been a while I guess.
I installed only proftpd-basic and it's default dependencies. Should be enough right?
My configuration files are as follows:
I created the user zeitgeist, gave it a password, group and a homedir. Group of the user is nogroup and the homedir is correct with the 755 permission. My port 21 for FTP is open I tested it with nmap -p 21 [ip-address].
My Filezilla client tells me that at first he is connecting, then the connection is established, And then the connection is closed by server.
I finally have my system to where I can connect to proftpd but my uploads fail. I think my problem lies in the upload folder. I do not really understand where to put it. Will someone look at this config file and tell me where to put it and what I need to do to get it working. A basic anonymous configuration, no upload directories.
[code]...
Im having proftpd 1.3.3a standalone on squeeze with mysql backend. It all works fine with one little problem. When i log in to directory, there is nothing in it - knowing there is shed load of files. Directories are simply not being listed. Im logging in as group member and directory permissions are rwxr-xr-x. In addition to that when i try to create new directory connection is being lost and client attempts to reconnect. After successful reconnection, connection gets lost and over and over again until i abort.
[code]...
i find Failed binding to 0.0.0.0, port 201: Address already in use. Check the ServerType directive to ensure you are configured correctly.
I just installed proftpd using webpin but when i tried to gonfigure it ,i figured out that the configuration file proftpd.conf is empty, is it about permission ?i just dont get it!
View 1 Replies View RelatedI am pretty new to Linux and I want to start a ftp server with proftpd. Well sofar I have made one but there is one problem when I login with windows, the computer don't ask for a username and password. Instead he just show some folders from my home directory.
I have used the standard proftpd config file, and tried to change some things with online tutorials but non of them worked with windows (only for linux ftp connections). Can some of you refer me to a good tutorial for a multi user ftp linux server or explane me what to do?
I am unable to install proftpd-basic:
The following NEW packages will be installed:
proftpd-basic{a}
The following partially installed packages will be configured:
proftpd proftpd-mod-ldap proftpd-mod-mysql proftpd-mod-pgsql
0 packages upgraded, 1 newly installed, 0 to remove and 13 not upgraded.
[Code].....
Is there an easy and simple way to setup apt(itude) so that only critical_security_updates are installed? for eg, I don't want to update LibreOffice Writer if there is newest font, but update stuff like SAMBA or Icewasel, proftpd..
View 2 Replies View RelatedI am attempting to setup an ftp server as a first project to get me going in the world of Linux however when I run the command apt-get install proftpd-basic ....
View 14 Replies View RelatedSo I've been trying to get a single user to login to an FTP site I've created using proftpd and I haven't had much luck. So check this out: this only applies to one user, I can "su" to the user account so I know the password is set, and I am even able to SSH into the box as this user. This totally eliminates a bad/incorrect password and the server IS accepting connections on port 21 because I can FTP as other users. I've ruled out the client because I tried locally and using a command promptWinders but still no luck. This is what I'm seeing in the logs when I attempt to connect using an FTP client.
::ffff:192.168.1.118 UNKNOWN proftpd [18/Jul/2011:15:57:44 -0700] "USER crownftp" 331 -
Jul 18 15:57:44 ctserver-2 proftpd: pam_unix(proftpd:session): session opened for user crownftp by (uid=0)
[code]....
Im trying to install proftpd on my debian server but i get this error
ProFTPd warning: cannot start neither in standalone nor in inetd/xinetd mode.
Is it possible to get "GADMIN PRO FTP" to pull data from a seperate server running MySQL? I want a little project and I've done a bit of asp.net where the user enters their data and is then saved to an sql database. I thought it would be cool to be able to get the ftp software to create a new user by pulling this data so then, potentially creating a simple sign up process. I am comfortable with setting up a separate server running MySql, I just want some confirmation of this.
View 2 Replies View RelatedDid a fresh install of Ubuntu Desktop 10.10 64-bit on my Dell D630.
I installed the Samba and used GADMIN-Samba to configure. The networking area is as follows:
But I'm am unable to attach to the SMB share. When I do a port scan on the PC network address it shows the port for SSH open along with the random high number ports for web connections but not the port for SMB (445). If I port scan 127.0.0.1 it shows SSH, netbios-ssn, and SMB open.
I've tried adding a rule to UFW and disabling UFW but it makes no difference.
I'm able to connect to SMB shares off of my Windows Desktop, so I know my home router isn't filtering any internal traffic.
I can get a tunnel connected via terminal with: openvpn --config client.ovpn
However, when I tried to use the "friedly" gui (gadmin-openvpn-client), it keeps telling me to "import server certificates into client first."
I don't know what that means. Nor, do I see a tun device.
I'm an undergraduate Physics student, and I would like to install a software for helping me with relatively simple tasks, such as calculating integrals, plotting graphs and performing some general numerical calculations. Can someone indicate me a good software for these purposes, preferably an official Debian package?
View 11 Replies View RelatedI am wondering if there's a better alternative than jigdo. I was trying to help out and choose what is recommended but this jigdo crap is ridiculous. Didn't work for me and the primitive bad design of it is a waste of time.
Maybe Debian should consider joining today's technology. There are supposed to be hybrid isos you can download and even Ubuntu is finally joining the camps doing that.But, there's nothing on Debian web pages mentioning 'hybrid isos.' Who uses jigdo anyway?There's no way of entering the url or any instructions that make it intuitive. Get rid of the jigdo and do something different....
Over the past few months Nomachine's NX Server has deteriorated to the point where it's unusable, as detailed in this thread for one machine. On my other machine it works, but I cannot do apt-get dist-upgrades as it spews forth messages like, "insserv: Starting nxsensor depends on stop-bootlogd and therefore on system facility `$all' which can not be true!".So I give up on them.
View 2 Replies View Relatedhave setup proftpd via gadmin, all is well and is activated.This is where im being stupid - what setting do i use in my ftp prog (filezilla)??
host: ive put my ip address (77.xx.xxx.xx)
user name and password
However, i have a number of computers on my network, obviously when i try to ftp into my server how does it know which one to connect to? or is this not required.i need to get this working within the next few hours, or ill be in do-dos.
I've created a package and added package conflicts entry in it's control file(in my case, all the lib-mesa packages). Now each package that depends on lib-mesa cannot be installed. How can i define my package as alternative to lib-mesa, so i can install those packages ? Is there a way i can add my package as an alternative in the package dependencies(the ones that depends on lib-mesa)?
View 1 Replies View RelatedI thought I'll be smart, and installed squeeze on ext4 partitions ( boot-ext2, root-ext4, home-ext4 and swap). With my Lenny (ext3), I use partimage to backup the / partition, and rsync to backup my /home files. Now, I found out that partimage does not work with ext4. Are there other GNU packages I can use to backup my / partition?
View 2 Replies View RelatedI have a desktop installed with Debian Squeeze and ALL my files are stored there, and is always on. Everyone has an account on this computer.
Each of us have laptops (Debian/openSUSE with KDE4) and sometimes need to use the files that is stored on the desktop. Currently, we are transferring the required files via usb drives.
All the computers are connected to a wireless router that connects us to the internet.
So, to enable all laptops can access the desktop's file, should I
- install smb to all the computers or
- install ssh for the task.
- or are there any better way.
Need to ensure,
- security as ALL my personal info is on the desktop
- easy to use and prefer gui than console as I have young kids using the system.
I noticed that WineHQ doesn't exist in the Debian repositories. Or is there a Wine alternative in the repositories? If not, how can I install the latest stable version of Wine ?
it says here http://www.winehq.org/download/debian that some .deb packages need to be downloaded and manually installed, but I don't know how to install them...