I cant figure out why my server running fc14 keeps saying login incorrect 530. I am using gproftpd. I know that the login is correct though. For instance:
Lets say my user is "goober" and my pass is "fedora" and I go and type that in when I try and login to the ftp it says login incorrect.
I'm trying to set up ftp server in the most simple way possible - login to home directories for existing linux users (except root). I get "Login incorrect" when I try to authenticate, although I am sure it is the right user-password (I even changed it using passwd on server's shell and tried again with the new one). The funny thing is even if I purge the proftpd package and install vsftpd instead - it doesn't help - I can't log in. But I can log in with ssh.
View 4 Replies View RelatedWhenever I try to click Activate it just sits there for a moment and stays deactivated..
View 2 Replies View RelatedI want to set up a ftp site for a few buddies to grab some files from me but I have no clue how to install this gadmin-proftpd-0.4.0. It shows a gui so how do I get that I am currently running ubuntu 10.04 w 3gb ram w a amd 9850 2.5ghz cpu on my server.
View 7 Replies View RelatedI'm running Ubuntu 10.4 Lucid Lynx and I am setting up gadmin-Proftpd and when I try and activate it. I get the following message and am really unsure where to go from here:
- notice: unable to bind to Unix domain socket at '/var/run/proftpd/test.sock': No such file or directory
- notice: unable to listen to local socket: Operation not permitted
- Fatal: TLSRSACertificateFile: '/etc/gadmin-proftpd/certs/cert.pem' does not exist on line 56 of '/etc/proftpd/proftpd.conf'
I couldn't get GADMIN-PROFTPD to activate so I activated it using sudo /etc/init.d/proftpd start Now when I have proftpd started from the terminal command line and go to [URL] in firefox I get a white browser window but no directory listings without any promtp for a username or password (192.168.1.100 being my internal LAN server IP address) Can you tell me what I am doing wrong with the below config?
[Code]......
That PoS called "gadmin-proftpd" does.NOT.work in debian stable and I don't believe it will ever work. Is there an alternative GUI for configuring proftpd or it has to be done in text mode?
View 2 Replies View RelatedI recently reinstalled my server, a Dell PowerEdge 1650 (well it works...., 'sides for what I want to do with it it's more then strong enough.) got debian on it, and then specifically Lenny. works great exept for one thing: Gadmin-ProFTPd.when I try to start it using SSH (which I always use to administrate my server) I get only this as a error: segmentation error I just noticed, that durning startup it already displays a error, mainly this: starting ftp server: proftp[ 77.535939] warning: 'proftp' uses 32-bit capabilities (legacy support in use)
- warning: unable to determen ip address of 'server01.locals_foxofinfinety_com'
- error: no valid server configured
- fatal: error processing configuration file '/etc/proftpd/proftpd.conf' failed!afther that is starts atd, cron and apache and further works............
I'm having quite a hassle getting proftpd to work.
My setup:
- CentOS 5 (latest version)
- ProFTPD Version: 1.3.1 (stable)
Want do I want:
A simple FTP server which allows me to acces the /var/www/html directory to upload new files for my apache webserver.
What are my problems:
When trying to login it says the following:
***Begin***
[root@ICT2-Gateway ~]# ftp 127.0.0.1
Connected to 127.0.0.1.
220 FTP Server ready.
500 AUTH not understood
[Code]....
As you can see this has nothing to do with faulty firewall settings since i'm only trying this locally. Futhermore the password is 100% correct (and keyboard layout).
Since I've changed alot in my config file it thought it's not worth mentioning here, I'm reverting back to default.
So I've been trying to get a single user to login to an FTP site I've created using proftpd and I haven't had much luck. So check this out: this only applies to one user, I can "su" to the user account so I know the password is set, and I am even able to SSH into the box as this user. This totally eliminates a bad/incorrect password and the server IS accepting connections on port 21 because I can FTP as other users. I've ruled out the client because I tried locally and using a command promptWinders but still no luck. This is what I'm seeing in the logs when I attempt to connect using an FTP client.
::ffff:192.168.1.118 UNKNOWN proftpd [18/Jul/2011:15:57:44 -0700] "USER crownftp" 331 -
Jul 18 15:57:44 ctserver-2 proftpd: pam_unix(proftpd:session): session opened for user crownftp by (uid=0)
[code]....
One of my servers is displaying the error as login incorrect even after giving the correct password. Once I restarted the Virtual Machine and after that it is accepting the same password to login. I am not able to find out the problem, why the server is not able to validate the password until the virtual machine gets rebooted.
View 2 Replies View RelatedI am attempting to connect to VSFTPD via Filezilla from a windows machine, but regardless of which user name I use I get a "530 Login incorrect" error. I have tried turning off the firewalls on both the CentOS and Windows side of things with no result. I disabled the SSL/TLS commands in the config file, also with no change. I tried a couple of different FTP clients, but got similar results regardless of which client I used. I have been going over man pages and documentation for a couple of days now, but cannot come up with an answer. I suspect it lies in my configuration, but I got the same results when I reverted my config file back to the original. what else I can do? One other note is that I am attempting to connect via a LAN, at this point I don't care if it works across the WAN as I only intend to use it to upload files to my web server.
[Code]....
have setup proftpd via gadmin, all is well and is activated.This is where im being stupid - what setting do i use in my ftp prog (filezilla)??
host: ive put my ip address (77.xx.xxx.xx)
user name and password
However, i have a number of computers on my network, obviously when i try to ftp into my server how does it know which one to connect to? or is this not required.i need to get this working within the next few hours, or ill be in do-dos.
I've been installing proftpd on a server running fedora 8. It is setup in standalone server type, and I checked that the process is running and listening to port 21.
When I try to login using a ftp client in Normal mode with root user & password , I receive first a 220, then a 530 login incorrect error.
Can you help me?
I've been pasting my proftpd.conf configuration file below
Code:
I upgraded from Ubuntu 9.10 to 10.04 and after to 10.10 alpha. After both dist-upgrade, the login screen that appears is from version 9.10. How I can update to the new login screen? It's possible?
View 1 Replies View RelatedI try to setup a small Debian system running on command line. Remote access shall be possible via ssh (for now also telnet) and a serial connected minicom via getty. I need the serial access as fallback in case the network is down.
As long as the package adduser is not installed, I can login as root via telnet and getty without problem. But from the moment "adduser" is installed with apt-get, the serial root login always fails after entering the right password with the message "Login incorrect". Even de-installing "adduser", or using a brand new "adduser test" user. When installing and using SSH it allows to login successfully, like telnet.
BTW: A dangerous behavior I observed with telnet: When I opening the connection via telnet, I'm immediately logged in as root - without asking for a password! I set a password with passwd which also is requested by SSH and getty (before the adduser installation) but not by telnet?!?!?
The /var/log/messages adds a line if login with su, but nothing when fails with getty
Here is my inittab:
Code:
# /etc/inittab: init(8) configuration.
# inittab,v 1.1 2006-07-27 08:58:03 lothar Exp
# The default runlevel.
id:2:initdefault:
[Code].....
I am getting "530 Login incorrect" error message when trying to connect vsftpd server through ftp.
I have vsftp executable and configuration file recieved from windriver. earlier i was not able to run this executable, but after few changes in vsftpd.conf now i am able to run vsftpd server. But when I try to connect to this server from another system I am getting above error.
I just installed Ubuntu Server 10.4.2 LTS (32-bit) on Virtualbox 4.0.6 The install went great everything seemed to work. But after it rebooted for the first time when install completed, it is prompting me for a username and password. Note, the only username and password i was prompted to set up was for non-admin stuff. So i tried this username and password i created during install, but it keeps saying 'login incorrect'. I have looked at other threads, although they are mostly for older Ubuntu Server versions, but i couldnt really find anything.
I tried to reinstall and go through the install slowly but still the same issue. i tried Ubuntu for username and no password, tried leaving username and password blank, tried root and the password i created... i tried everything I could think of...
I've never observed this problem neither did any of my colleagues trying to SSH into the same system. If I try logging into my server using a wrong username and then press ^C to terminate or exhaust my password attempts, I am locked out for at least an hour. Is there something I can do on my end to fix this problem?
View 1 Replies View RelatedWhen ever i try to login to my ftp server(linux, fedora) through filezilla or cuteftp then its giving error even if login details are correct. Its are working fine locally but remotelly its giving error when ever i try to connect to it using external ipaddres or domainname. the error is as follows Status:
Connected with [URL]. Waiting for welcome message...
Status:Connecting to host1.domain.com ...
Response:220 (vsFTPd 2.0.5)
Command:USER test
But if i try to connect to ftp server via brower(internet explorer or mozilla). ITs working fine.I dont know what is the reson behind this. few days back it was working fine through filezilla or cuteftp. proxy setting are also fine. its the same which i was using few days back.
I'm using ProFTPd as my FTP server on a CentOS 5 box. Since updating to version 1.3.3c, I seem to have very specific problems. Connections work quite fine with about any FTP client out there, including the basic ftp command from the Linux prompt. However, when trying to connect to that server with LFTP, things go wrong. When connecting, all I get is [Connecting] then [Logging in...] and then nothing. I have to add that SSL is forced off in lftp.conf (I read it could be the problem). I sometimes get a counter for reconnection, but it never works.
The command I use in lftp is : open -u <user>,<pass> <server_ip>, the ls for lftp to establish the connection. I don't see anything at all in the server's log. I just see "FTP session opened" and "FTP session closed" in /var/log/messages" and nothing in /var/log/secure. I can give you a strace if needed. Please keep in mind that the server WORKS with anything but LFTP and NCFTP (which I also tried).
Today I have installed Linux SUSE 11.2 . At installation, I was asked for user-name and password. I edit this correctly.
At the end of the installation, the system reboots until the mask 'user name' and 'password' will be displayed. When I edit my user-name and the password the system said, that the login is not correct.
First, I think, I have forgetten my password an do a new installation of Linus SUSE 11.2 . Whatever, the same problem ist still there.
I have just bought a PC with SUSE 10.1-0. The first time I started the PC an installation menu appeared. I didn't define a user name, thinking that it should log in automatically (as in Windows occurs), but now I can't go farther from the Welcome screen, due to the system is asking me de user and password, but I didn't introduce nothing! Leaving username and password in blank didn't solve the matter.
I can see the admin screen (pressing F10) but I am not able to find any user to log (logically) and I can't include new users from there.
I have also tried to install Windows XP modifying the BIOS but the system returns a message (once in the WinXP installation program) about an error called 4096, about the file i386halaacpi.dll, which is unable to find (something about the HAL), so I am afraid that my (new) RAM memory is damaged.
What could I do? The system is for an old person, so I would like to install finally WinXP and delete Suse.
I am pretty new to Linux and I want to start a ftp server with proftpd. Well sofar I have made one but there is one problem when I login with windows, the computer don't ask for a username and password. Instead he just show some folders from my home directory.
I have used the standard proftpd config file, and tried to change some things with online tutorials but non of them worked with windows (only for linux ftp connections). Can some of you refer me to a good tutorial for a multi user ftp linux server or explane me what to do?
which is the best vsftpd or Proftpd or Pureftpd ?
which is high secure and reliable ?
Pureftpd or Proftpd can install on Centos ?
I followed this tutorial trying to set up proftpd. I'm using Slackware 13.1, but I had assumed most of the tutorial was all relevant still.Using the default proftpd.conf file, I was able to do anonymous login, but I was hoping to use the conf file in the tutorial to only allow certain users, so it currently looks like this:Quote:
# To really apply changes reload proftpd after modifications.
AllowOverwrite on
AuthAliasOnly off
[code]....
I run Debian 5 64-bit machine with 2 IP-addresses. I installed ProFTPd through init.d instead of standalone but when I start it, it gives the following error:
Code:
ProFTPd warning: cannot start neither in standalone nor in inetd/xinetd mode. Check your configuration.
If I select standalone as servertype through the config, it works good.
Previously, I had this same machine on the same OS with 1 IP-address. I installed ProFTPd and it worked well with init.d . Maybe the 2nd IP is causing it? How can I make it work through init.d without having this error?
I installed proftpd on a new CentOS 5 server, yet when FTPing in (I can log in fine), the files and directories do not list and I get a "550 filename: Permission denied" error each time I try to "put" or "get" a file (I can tell that the file is there, though, because if I try to access a non-existent file, I get a "No such file or directory error" instead of the permission denied error).
View 10 Replies View RelatedAccording cu proftpd documentation this should limit upload file size to 5 MBytes to everyone excepting user crystal which is allowed to upload 100 MBytes.
Code:
# Restrict upload to only 3 megabytes
MaxStoreFileSize 5 Mb
MaxStoreFileSize 100 Mb user crystal
My Proftpd also restricts the user crystal to 5 Mb. It seems the second line is not taken into consideration.
I recently installed ProFTPD on a Centos Linux with configure,make,install...(yum install proftpd didnt work) i installed everything it works but i cant control it through Service like, Service proftpd start,reload,stop like i used to on older servers.
View 5 Replies View Related