I want to install php 5.3 on debian wheezy
/etc/apt/sources.list
Code: Select alldeb http://http.debian.net/debian wheezy main
deb http://http.debian.net/debian wheezy-updates main
deb http://security.debian.org wheezy/updates main
/etc/apt/preferences.d/preferences
[Code] .....
I don't know why apt pinning not working.
I want to pull a couple of packages from Debian Testing, but I can not get apt pinning to lower the testing repo's priorityI add the testing repo to the bottom of /etc/apt/sources.lst.I then add this in /etc/apt/preferences but when I do 'sudo aptitude update' and then 'sudo aptitude full-upgrade', it wants to upgrade all packages to the versions in debian testing.
View 5 Replies View RelatedI am thinking about upgrading, again, from Wheezy to Jessie. When I had Jessie installed, prior to a crash, I noticed that some of the Gnome games in Jessie are not as esthetically pleasing as they were in Wheezy. Also, some of the games (eg. mines) were slower and seemed to use a lot more CPU resources. So my questions are:
1. If I pin those programs that I want to keep will that also pin the dependencies for those programs?
2. If those dependencies are pinned, how might that impact other programs, in Jessie, that might depend on later packages?
3.If I don't pin those programs that I want to keep is it possible to install those programs from Wheezy after I upgrade to Jessie, without causing issues with Jessie?
I keep on trying to upgrade iceweasel on Jessie for a few months now and apt-listbugs always finds some scary bug so I pin the package. About 3 times I pin the package, wait a month or so, delete the apt-listbugs file and try again and it finds another grave bug. Right now it's this one:
Code: Select allgrave bugs of iceweasel (31.8.0esr-1~deb8u1 → 38.3.0esr-1~deb8u1) <Outstanding>
b1 - #789955 - devscripts: [bts] "bts show" command displays error: (process:29614): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
So I see my iceweasel version is "31.8.0esr-1~deb8u1" now and it looks a bit old. Is there any security issues I need to be aware of?
I'm using Debian testing but I want Shotwell (and nothing else) from experimental. I also like to be notified when there is an update to Shotwell in experimental. Will that be achieved if I add experimental to sources.conf and the following to preferences?
Package: shotwell
Pin: release a=experimental
Pin-Priority: 600
I wish to pin a process to a CPU1 in my dual CPU machine - how can I do it in Linux - any pointers ?
View 2 Replies View RelatedI installed debian etch on my system. Installation done successfully, but when it boots up the X server is not starting and showing error. Note : It is perfectly working with debian lenny. Configuration : Intel DG41RQ ,1GB Ram ,160GB HDD.
View 1 Replies View RelatedI'm on a Debian Lenny 64Bit OS and the WPA key is not working.
I've got an Atheros AR5212/AR5213 chipset on an Airlink 101 AWLH4130 card.
Also, here's the /etc/network/interfaces
No matter what I try I just cant get cron working for me on my Squeeze setup I can type /usr/bin/soffice and openoffice will fire up no problem but put into a crontab and nothing for instance just to test if crontab is working I have this/5 * * * * /usr/bin/sofficeIn y user crontab but nothing happens I have run as root crontab -u djt crontab And after editing the crontab with crontab -e it says it is installing crontab but it just does nothing Unfortunately I am connected to my works network so unable to receive internal mail from cron so cant find any reason for it not working
View 4 Replies View RelatedI just updated to a new Kernel, in Squeeze. So far everything seems to be working properly but NetworkManager. It shows that I am not connected but I obviously am because I am posting this thread. When I click on the icon in the bar by the clock, with active applications, it does not show any networks available, even though I have wireless and networking enabled
View 5 Replies View Relatedcan't get my microphone to work. Here is the output for: dmesg | grep input
[code]...
I use my debian machine for masquerading, packet filtering anilar for a tiny network.It runs the latest debian testing.Every now and then (i am talking about weeks) the connection to my internet stops working.ifdown eth0; ifup eth0 brings it back.The other interface (eth1) is never effected.The odd thing is, there are no warnings, no messages .. nothing.I cant find any entry. Nothing in the logs, nothing in dmsg and no kernel panic.The only way to find out when it might have been happened is to search in several daemons log files,to find out when their first error connecting to the internet occurred.I ran memtest without any results.The nic is e1000 compatible.
View 2 Replies View RelatedI installed Debian Squeeze yesterday and I got almost everything working except for the backspace key in any browser I've tried..I'm running it on HP Mini 210 if that can help w/ something and one more i tried upgrading it to testing but a verry long and boring text file appears and to close it and continue, i have to press the end button the problem is that i do not have one .. i've tried every single other key on the keyboard - still nothing.
View 1 Replies View RelatedI am not able resolve any domain name but I am able to ping 8.8.8.8..Here is my config of /etc/network/interface
allow-hotplug eth0
iface eth0 inet static
address 10.50.243.141
netmask 255.255.255.0
broadcast 10.50.243.255
gateway 10.50.243.100
dns-nameservers 8.8.8.8
Here is the config of resolv.conf
nameserver 4.2.2.2
I have an Acer Aspire 7720Z, and running Debian Squeeze/Sid. My problem is the cpu fan is not working, and I don't have a clue how to solve the problem. When the CPU temperature becomes too high, the laptop stops, so it's very annoying. I can't compile anything, or run an "heavy" software.
The fan is working, just after the boot before grub menu or under Windows Vista there is no problem so that is not a hardware problem.
I've installed lm-sensors, the output is
acpitz-virtual-0
Adapter: Virtual device
[Code].....
In order to save power and to cool down my Debian system a little bit, I installed cpufregs the other day and changed it the cpu gonever to on_demand.
Well I came back to the box today and powertop tells me that the cpu has been running at 2.66ghz (max freq) for 99/99% of the time.
Running cpufreq says this: Code: analyzing CPU 0:
driver: p4-clockmod
CPUs which need to switch frequency at the same time: 1
hardware limits: 333 MHz - 2.67 GHz
[Code].....
I recently installed Squeeze, installed several applications via the package manager and almost universally, the help menus don't function. Flash is installed and works for Iceweasal, at least I can watch a ..... vid.
View 3 Replies View RelatedI have XP and win 7. I want to triple boot with Debian.When I install, grub finds win 7 and XP and says everything should be fine, but then when I boot, only debian appears.This was fixed by doing update-grub2 after logging in.Now, I have win 7 bootloader as an option. However, when I boot into XP, and then reboot, grub disappers. he screen just says welcome to grub and then a blinking cursor.
View 10 Replies View RelatedI have a ts3.desktop file in my /usr/share/applications folder that I want to run on system boot. I have typed the following commands which don't work
Code: Select allcrontab -e
Then in the editor, I typed the following line at the bottom of file. I also made the necessary carriage return after this line.
Code: Select all@reboot gtk-launch ts3 /usr/share/applications
Then I pressed ctrl+o to save it.
After I put these commands in, I did the following command to troubleshooting this issue, see below.
Code: Select all$ crontab -l
no crontab for server
$ps -ef | grep cron | grep -v grep
root 532 1 0 21:35 ? 00:00:00 /usr/sbin/cron -f
But after I reboot and nothing happens, the application doesn't start.
I have Inceweasel 31.8.0 installed on LXDE Debian Wheezy and I am trying to make AdBlock Plus work. The thing is that I get pop-ups from any site, Youtube ad videos, etc. all the time, just like I have nothing installed to prevent that.
I tried:
- Installing AdBlock from Iceweasel add-ons, with a suscription to easylist ;
- installing xul-ext-adblock-plus (also with the same suscription).
With each configuration or even with none of them, I get the same results as described above. Is there anything I can do ?
By the way, I don't get Youtube ad videos on Chromium with Adblock installed through the Chrome webstore.
php5-memcached is working without problems but has no igbinary support.
So i did:
Code: Select allwget https://pecl.php.net/get/memcached-2.2.0.tgz
tar -xzvf memcached-2.2.0.tgz
cd memcached-2.2.0
phpize
./configure --enable-memcached-igbinary
make
make test
make install
And also put
Code: Select allextension = /usr/lib/php5/20131226/memcached.so
in the php.ini
But memcached is not loading??
It's Nginx with FPM/FastCGI PHP 5.6.14-0+deb8u1
After installing 3.5.6 from backports, applets stopped working. I installed the java-6-sun package but it's still not making it. Searched google but haven't found anything but some bug fixes. Also saw something about ipv6, but not sure if that's related. That seemed to affect java programs. I use jedit and that is working fine. I downloaded the latest SDK from Sun and created a link from /usr/lib/mozilla/plugins and /usr/lib/iceweasel/plugins and /usr/lib/mozilla-firefox/plugins to /opt/SDK/jdk/jre/plugin/i386/ns7-gcc29/libjavaplugin_oji.so. Prior to the update to 3.5.6, the plugins were working and I could get the ..... stuff etc.
View 8 Replies View RelatedInstall openssh so that I can access my desktop (192.168.1.100) from my laptop (192.168.1.200) using konqueror with "fish".Googled and read that the sshd_config should be updated to enhance security.Tried fiddling with sshd_config on the desktop and hit a brick wall.Before setting ListenAddress 192.168.1.200 in sshd_config, the laptop can access the desktop with problem.However, after setting it, the laptop is not able to access the desktop.
View 4 Replies View RelatedI installed openjdk 6. The compiler works fine, but when I try to run the .class file, I get:
Exception in thread "main" java.lang.NoClassDefFoundError: hello/java
Caused by: java.lang.ClassNotFoundException: hello.java
at java.net.URLClassLoader$1.run(URLClassLoader.java:217)
[code]...
I am unable to use Steam via Wine. Here is exactly how I have installed Steam (downloaded the sid amd64 .deb from lamaresh.net):
# dpkg -i wine<tab-completed>.deb
# aptitude install lib32nss-mdns wine
$ cd /tmp/
wget http://download.microsoft.com/download/office97pro/fonts/1/w95/en-us/tahoma32.exe
[Code]....
If I recall correctly, my Squeeze desktop is working whereas my Squeeze laptop isn't.
Here are the errors: Failed to open a session for the virtual machine Ubuntu 10.04.2. The virtual machine 'Ubuntu 10.04.2' has terminated unexpectedly during startup with exit code 1.
Result Code:
NS_ERROR_FAILURE (0x80004005)
Component:
Machine
[Code]....
I installed Debian6 but sudo does not work, says: bash: sudo: command not found. and when I run the command: sudo apt-get install, I say E: Unable to locate package sudo.
View 9 Replies View RelatedI have already installed gnome-power-manager.
There should be the suspend and hibernate buttons in th System Menu, but there is only two options, Shut down and Log off.Also, in the Power Manager Preferences window, it has no option for suspend and hibernate.
How to add suspend and hibernate options?
I downloaded cd1 of amd64 debian os. Its not booting from the CD. There are no problems with the drive or the laptop. I have successfully installed ubuntu from its cd image booting from the CD-ROM drive.
View 1 Replies View RelatedI would need your help to solve some problems that came after upgrading to Squeeze:first: xserver is not working. When I manually launch startx I got an error message: vesa kernel modesetting driver in use refusing to load no screens found
View 8 Replies View Related