Debian :: NIC Stops Working Every Now And Then?
Jul 18, 2011
I use my debian machine for masquerading, packet filtering anilar for a tiny network.It runs the latest debian testing.Every now and then (i am talking about weeks) the connection to my internet stops working.ifdown eth0; ifup eth0 brings it back.The other interface (eth1) is never effected.The odd thing is, there are no warnings, no messages .. nothing.I cant find any entry. Nothing in the logs, nothing in dmsg and no kernel panic.The only way to find out when it might have been happened is to search in several daemons log files,to find out when their first error connecting to the internet occurred.I ran memtest without any results.The nic is e1000 compatible.
View 2 Replies
ADVERTISEMENT
Nov 13, 2010
I'm running Ubuntu 10.10 Maverick Meerkat 64-bit on my desktop with a wired internet connection (with no firewall). For the past 2 days, I have observed that1. Firefox randomly throws up errors like "Problem loading page" whenever I click on a hyperlink. When I click on Reload, the page loads up just fine. This has been happening a lot recently..and I do not remember updating anything consciously. By the way, ipv6 is disabled in Firefox.2. The network stops working all of a sudden (usually indicated by the Firefox error). The Autho Eth0 indication is active, but I am unable to connect to any external machine.
3. Needless to say, this error is manifesting itself in apt-get as well. I get "something wicked happened" errors all the time, and am unable to download or install anything.That this is not a problem with the ISP is obvious because I also have Windows (from which I'm typing this, ironically), which is able to access the internet.Is this a bug in Ubuntu 10.10?
View 9 Replies
View Related
Jan 31, 2016
I have a Lenovo Thinkpad R500, and recently I recently upgraded it with a Crucial SSD as well as 8 GB of DDR3, as I had a blank SSD installed, I decided to switch from Mint to Debian and see how I like it. I'm using Debian 8 with the MATE desktop and so far it's been quite a pleasure to use, besides one small thing.
Every 5 to 10 minutes, DNS resolution stops working completely. I can ping IP addresses as well as connect to websites by IP address just fine, however I cannot resolve hostnames. The problem exists regardless of whether I'm connected to my router via a wired or wireless connection. It is not occurring on any other computer in my house and didn't exist on my old Mint installation. If I disconnect from my home network by either unplugging the Ethernet cable or flicking the WIFI switch on my laptop, and then reconnecting, I can resolve hostnames again, albeit only for another 5-10 minutes, when DNS stops working again.
I was originally using DHCP and my ISP's DNS servers, but switched to my laptop using a static IP address and Google's DNS Servers at 8.8.8.8 and 8.8.4.4, the problem persisted after this change.
View 3 Replies
View Related
Jun 28, 2015
In a hp pavilion 15 Notebook PC with Debian 8.1.After two hours or so wifi stops working. Network-manager does not give any indication of failure but some times a yellow question mark.
rfkill list wifi gives:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
ifconfig gives:
eth0 Link encap:Ethernet HWaddr 8c:dc:d4:7b:c2:0e
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:3994 errors:0 dropped:0 overruns:0 frame:0
TX packets:3661 errors:0 dropped:0 overruns:0 carrier:0
[code]...
View 9 Replies
View Related
Sep 9, 2011
when running on AC-power, only on battery.When I have my laptop on battery, and I plug the mouse in, then the USB mouse is working if I keep moving it around. If I then lay it alone for 5 secs, or so. it stops working.I cannot get USB sticks to work as well.
View 3 Replies
View Related
Jun 25, 2010
The browser has flashplugin installed previously.It has been working without problem before. For unknown reason it stops to work.Now I'm required to install Adobe Flash Player.I have"install_flash_player_10_ linux.deb" download on Adobe website. Whether I run dpkg to install the package?
View 6 Replies
View Related
May 16, 2015
I am having a problem which I am having a hard time finding out about. To start I am running Debian 8.0 on a laptop through an external Seagate 2TB HDD that I connect via USB 3.0. My problem, basically, is when ever I use Linux for an extended period, for what ever reason, some of my icons disappear and my terminal breaks. More specifically, say I were to try to shut down the computer at the time of the problem the icons and text telling me which option is which, in xfce4, are gone. Then if I click on the would be shut down button it just goes to a black screen with a white underscore and hangs there. This symptom is probably due to the fact that commands in the linux terminal stop working. As in, if I were to type ls it tells me there is no command (something like that) and tells me some folder directory that I think is where bash is located. I wish I could be more specific with some of these details.
Anyway the only way for me to "fix" it is to just do a hard shut down, then upon reboot it clears the orphaned nodes. Also, before, when I installed linux several weeks before I never noticed this issue, if it was ever present. However, now that I have seen it, I have since tried re-installs of debian to no avail. I have a feeling it could be the external hard drive, but that notion is not based on any evidence.
View 2 Replies
View Related
Mar 24, 2015
After installing KDE USB keyboard and mouse won't work. They are added to /proc/bus/input/devices though.
I also tried to install Gnome; same thing.
I took #usb-devices and they were there also..
But #usbhid-dump did not generate anything to screen.
View 4 Replies
View Related
Nov 9, 2010
I'm running Debian server 5.0.6 and the latest stable version of Apache. I am hosting a website and it will stop responding after an unknown amount of time. In order to make the website work again I have to run /etc/init.d/networking restart. The server is running a static IP address and is not resetting when the website goes down. I don't know where to start looking.
View 4 Replies
View Related
Aug 17, 2011
Testing distribution. Installed Linux 3.0 but left 2.6.32 on as backup. When I boot into the old kernel, wireless mostly works OK, but never when I boot with the new kernel.
Results of dmesg|grep wlan0 on 2.6:
[ 22.005102] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.196774] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.644779] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.688053] wlan0: direct probe to AP 00:19:5b:06:9f:ba (try 1)
[ 30.694053] wlan0: direct probe responded
[Code]...
Noticing the Access Point looked like it needed the MAC address, I ran iwconfig wlan0 ap <MACADDRESS> and sometimes it will work, and wicd can connect to the access point. But sometimes the command fails to run.
View 4 Replies
View Related
Mar 19, 2011
I have xorg configured to enable middle button emulation:
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
[code]...
View 1 Replies
View Related
Mar 14, 2015
Have a very unusual problem that I am looking at troubleshooting. Only problem is I don't know where to start.I have the following wireless usb device:
Code: Select allBus 002 Device 007: ID 050d:845a Belkin Components F7D2101 802.11n Surf & Share Wireless Adapter v1000 [Realtek RTL8192SU]
Now it is fine when browsing the web, but whenever I download a large file/game from Steam it becomes unresponsive and stops working.I have noticed it happens whenever the download is maxed..which at the moment is at around 5.4mbps on steam.Never get a warning...just internet stops working...no pages can be displayed...The connection never disconnects.I can only get it working again when I unplug it and re insert it back in again.
Things I have tried:
- Returning it to the shop and getting a new one (didn't fix it).
Code: Select allzerocool@hal9000:~$ uname -a
Linux hal9000 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03) x86_64 GNU/Linux
View 7 Replies
View Related
May 18, 2011
Something weird sometimes happens on my Debian system. Typically at the prompt line I can use combo like alt-d to delete a word, alt-f to go to the next word, etc. But quite regularly something happens in my xterm that makes alt-d and alt-f not work anymore: suddenly they print 'ä' (alt-d) and 'æ' (alt-f).
Note that this happens in a terminal that was acting like I wanted to at first. But then somehow must send a code or something that changes the behavior of the terminal. It happens in xterm because that's where I always work. If I go to a console by doing ctrl+alt+f1 then by default alt-d does what I want (delete word) and so does alt-f. Maybe that I could screw that one too by doing some bad manipulation: I just don't know because I don't work in text mode.
Also note that if I spawn an xterm from the "broken" xterm, then the new xterm work as I expect. What is going on? What am I turning on that was off previously? My .Xresources says that and, once again, when I open an xterm it behaves as I expect it, it's only later on that "something" makes that it goes back to broken "I-print-characters-with-diacritics-and-other-nonsense" mode:
$ more .Xresources
XTerm.vt100.eightBitInput: false
XTerm*eightBitInput: False
View 2 Replies
View Related
Mar 18, 2010
I have Ubuntu 9.10 installed on my laptop. The laptop has a single HDD with 2 partitions. Partition 1 has WindowsXP and partition 2 contains other data, among which the directory of the ubuntu installation. The partitions are formatted as NTFS. Ubuntu has been installed with wubi on the second partition. Ubuntu has been working fine for 2 days. Last night I updated the Ubuntu system and it required a restart. Needless to say, after the restart, grub wouldn't load. It just shows the shell.
I read the threads inside this forum and people usually manually select a kernel and boot up ubuntu, but when I do this, after I input all the commands I input "boot" and hit ENTER. The computer starts booting up until a point when it says ALERT! /host/ubuntu/disks/root.disk does not exist and something about using selection #1 and exits to shell (Easy Shell or Easy Boot, I can't remember exactly what it says... Easy something anyway) I've read that this is possibly caused by a NTFS dirty tag... but I do not see how to fix this problem.
View 1 Replies
View Related
May 7, 2010
I have read no fixes anywhere, oddly. This problem happened in 9.10 and seems to be back in 10.04. The fix on Ubuntu-Geek, which was re-posted various places, does not work either. However, I do know this is not a hardware issue... or think. I have a dual-boot with Windows 7 and it is not affected by this. Also, if I install anything 9.04 or earlier, this does not happen. Oddly, my netbook had 9.10 and now 10.04 but not this issue. Sadly I feel I must try other distros as this appears to be a Ubuntu specific error.
View 9 Replies
View Related
Aug 11, 2011
This is the first time I've got a major problem with Ubuntu (I started with version 5), and this one is particularly frustrating.I'm running Ubuntu 11.04 on my old (2007) desktop PC.Occasionally, but more and more often now, the keyboard just stops working. The mouse is still fine. When I shut down, I would sometime notice that the "stop crash report generation" process fails. Then the shutdown sequence stops at some point, and I am forced to do a hard shutdown, power down for a while, and reboot. If I don't wait after power off, the keyboard freeze would occur again at any time during the start up sequence. I even had a keyboard freeze after manually switching to the Windows boot.
View 2 Replies
View Related
Jan 30, 2010
v been trying to fix this for a few days now, and the stress has been building up. I have searched for hours on end trying to fix my sound, and If i can't fix it soon ill have to spend another few hours going back to Windows XP even though i wiped my harddrive for Linux Ubuntu 9.1.My issue is, that my sound changes from what it should be, to a dummy stereo output sound. Which i dont know how to fix. I'd be incredibly happy if someone could give me a link to a tutorial for dummys,
View 9 Replies
View Related
Nov 16, 2010
if the computer sits for a length of time, not being used. I have not timed it, but around an hour it seems. All drop downs work, but whatever i click on doesn't do a thing so i can open the drop down to shut down but when i click on it it just sits there or if i try to open firefox or chrome it just sits there. if im browsing the web or playing a game for a couple hours everything works but it i leave it to do something else and it takes close to a hour, and i dont shut it down. It just stops working. then i have to kill the power to stop it.
View 4 Replies
View Related
Feb 20, 2011
I'm using Fedora 14, 64-bit. My wi-fi adapter is Intel 5100 AGN on a Lenovo laptop. The wi-fi router is Zyxel. From time to time, I'm getting a black message, that a kernel component has crashed (or something similar). Here are the error details:
Package: kernel
Latest Crash:Sun 20 Feb 2011 04:27:54 PM
Command: not_applicable
Reason: WARNING: at net/wireless/core.c:633 wdev_cleanup_work+0x52/0xbd [cfg80211]()
Comment: None
Bug Reports:
In most cases, after that, I'm loosing the internet connection. I can't open any website, can't ping the router (which is my default gateway) and now it happened even without any error, which really pissed me off. Logging out and back in doesn't help, I need to make a full reboot to get back my internet connection.
Under Windows 7 everything is working fine and I'm not having any trouble with the internet connectivity! I had Fedora 11 32-bit before and it was also working normally!
View 4 Replies
View Related
Apr 19, 2011
My USB mouse stops working sometimes after 5 mins, sometimes 30 mins. Used two different '"corded" USB mice, different USB ports. Same issue. The power to the mouse itself seems to turn off as the laser light is off. Unplugging and replacing does not fix, only a reboot. Same problem with Ubuntu and Mint.
View 1 Replies
View Related
Jun 27, 2011
I have just installed Fedora 15 xfce on my desktop. When I 1st start my computer my RaLink RT2870 works but after a while it disconnects and won't start again till I restart.
I can't see any pattern I am doing to make it stop. I been doing various tasks when it stopped working. I don't what command prompt or configuration file to look for or what to configure in the file.
View 1 Replies
View Related
Jul 5, 2011
Initially it was working fine after fedora 15 install.However recently it simply stops responding after a period of time.After reboot, sometimes it does repair itself but again stops working after some time.I'm not aware of any package updateperformed or configuration change that would have impacted it.And it does work intermittently as mentioned above
View 2 Replies
View Related
Jul 13, 2011
I recently compiled a new kernel (2.6.38.8) but it seems I forgot something. Right after grub, when the new kernel is selected (by using the keyboard), the keyboard stops working (it's on usb). When I select the old kernel everything is working nicely.
I actually used the config of the old kernel to configure the new one but excluded some modules before I finally compiled it. Now I'm asking myself which modul did I erroneously throw out?
Edit: A somewhat related question: Is there a log somewhere in the kernel source folder (or someplace else) which shows the kernel compilation process?
View 1 Replies
View Related
Aug 11, 2010
This is an intermittent problem. My mouse works on boot, but stops working periodically. Once it stops, I have to reboot the computer. The problem is more than a little annoying. My hardware and software is as follows:
*AMD Phenom X3
*Integrated geForce 8200 GS
*Opensuse 11.3 64-bit
*Mouse - microsoft wireless comfort mouse 2.0
*Keyboard - microsoft wireless comfort keyboard 1.0A
I am not sure what logs I should attach. The contents of /var/log/messages leading up to the mouse stopping is as follows:
Code:
Aug 11 21:10:39 linux-r1v4 kernel: d:Ukonkyrlae tasae e ,cd x1o s06/ei0.<> 42159]akdsro:Ue'ekyoe 01<ecd> omk tkon
Aug 11 21:10:56 linux-r1v4 dhclient: XMT: Solicit on eth0, interval 111130ms.
Aug 11 21:12:47 linux-r1v4 dhclient: XMT: Solicit on eth0, interval 119700ms.
[code].....
View 2 Replies
View Related
Jan 13, 2010
After I install audacity my mic stops working.
View 2 Replies
View Related
May 26, 2010
It has to be an update or something that cause this. I've done nothing differently from the other days I use this laptop. I have to keep relogging every now and then because the sound stopped working. I can turn the volume up but pidginrhythmbox, nothing makes noise anymore. it's random...it just started happening today and this is the second time the music went out. anyone have any idea of how to stop this from happening in the future?
View 9 Replies
View Related
May 30, 2010
I have an Hp Tx2 tablet with Lucid on and recently my touchpadsiezed to work while resizing a large partition on an external usb hard disk (which I believe has nothing to do with it). The resizing took me a day or 2. Since then, every time I log in, my touchpad freezes. It works fine at the login screen. As far as I recall, I did not do any substantial updates or apt-get installs recentlyWhen I cat /dev/input/mice it does give output, so I assume that it still works, there's just something in between, blocking my touchpad when logging in.
The driver is psmouse I figure (although I would think it's an usb touchpad), and if I remove the module and reload it, that does not make a difference.I already tried blacklisting, and loading after logging in.Anyone any input on how to debug/solve that?One thing I can add is when plugging in a usb mouse, that one does work. But that doesn't change anything on behalve of my touchpad. So it seems they use a different driver
View 9 Replies
View Related
Jun 16, 2010
I'm having some problems with wireless, it works fine on boot but after a while pretty much randomly, it can be a few days or it can be a few hours, it stops working. I'm not sure which command would tell you what and it would take a little while to debug it because like I said it's random, but if anyone knows what to do please tell me! I'm on Lucid Lynx 10.04.Another something that's really bothering me (But not related to wireless) is that for some reason when I restart my computer, the top panel keeps changing the applets locations.
View 9 Replies
View Related
Oct 22, 2010
I have created a Samba share, using the fantastic Webmin tool. I have a network media player which can connect to my router, and then access windows (samba) shares. Most of the time, it works fine - it's able to stream HDTV wirelessly across the network. However, every so often, it just stops working ... the media player sees :
Network, then
WORKGROUP, then
FILESERVER-1 (machine name), then
Media (share name), then
Video (subdir, then
TV_Shows (subdir), then
MyShow.AVI ... just hangs
if I use the Webmin tool, I see multiple samba connections all from the media player. Restarting samba seems to have no effect. The only way to fix it, is to reboot.
logfile I can check, or a setting I can tweak to fix this issue ?
When it get like this, trying to access the share from a windows machine, just gives me an error saying it can't find the machine. But when it's rebooted, it works fine.
I have mapped the "nobody" linux user to "guest" which is what the media player is defaulted to login with (it's primarily sold as a "Windows" media player), and using Webmin I have assigned the "nobody" user read-only rights to the samba share. It worked fine for 6 months, until I added this new drive.
View 2 Replies
View Related
Nov 25, 2010
Just a short while ago my mouse pointer froze randomly. I figured it was just the mouse so I disconnected and reconnected it, still nothing. Restarted computer and it worked for a while, then froze again. The mouse is wireless, but it doesn't seem to be anything to do with the mouse's hardware. The laser on the mouse and LED indicator on the sensor are both still flashing away while it's stuck. I then restarted again and tried an old wired laser mouse, which followed suit and worked for a few minutes, then froze mid-screen. This time I left it in, and it's been stuck for a good ~15 minutes so far. Using Ubuntu 10.04 x64. Mice are just generic wireless and wired lasers of Microsoft and Logitech, respectively.
View 1 Replies
View Related
