I am not able resolve any domain name but I am able to ping 8.8.8.8..Here is my config of /etc/network/interface
allow-hotplug eth0
iface eth0 inet static
address 10.50.243.141
netmask 255.255.255.0
broadcast 10.50.243.255
gateway 10.50.243.100
dns-nameservers 8.8.8.8
Here is the config of resolv.conf
nameserver 4.2.2.2
I've created live squeeze usb-hdd, but nslookup and tracert are missing. Which packages should be additionaly installed?
View 2 Replies View RelatedFor what purpose does "nslookup" command should be used? Any examples.
View 4 Replies View RelatedHave Fedora 11 running fine on my multi-Opteron system - but have stumbled into a problem which *might* have some significance (since it might relate to other system functions).When I tried to use nslookup (get the same error with dig, btw), I get the following error message:nslookup: error while loading shared libraries: liblwres.so.50: cannot open shared object file: No such file or directoryMy *guess* is that this is a bind-libs error, but I'm brushing up against the extent of my personal knowledge-base on this one.
View 10 Replies View RelatedNot really a linux specific thing I have gooled the heck out of it and tried nslookup -a and a few other options nothing gets me what I need. The question is I have a machine with several aliases in dns. How do I do a nslookup and display all the aliases for a system.
I am trying to see if something it aliased correctly but i cannot list all the names a system is know by.
I am sure its something simple I am missing with a switch.
I am not so experienced with networking in Linux. I've successfully installed Red Hat Linux Enterprise 5.2 on a VMware host. When I issued nslookup command, it returns "connection timed out" error as follows:
Code:
[root@rac1 ~]# time nslookup rac1
;; connection timed out; no servers could be reached
real 0m15.038s
user 0m0.000s
sys 0m0.000s
My questions are:
(1) Is that error normal?
(2) Is there a way to decrease the 15.038s value? rac1 is the local hostname, so why it takes all that time to resolve it.
Following info may help:
Code:
[root@rac1 ~]# hostname
rac1.mydomain.com
[root@rac1 ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
#eth0 - PUBLIC
192.0.2.100 rac1.mydomain.com rac1
[root@rac1 ~]# ping -c 4 rac1
PING rac1.mydomain.com (192.0.2.100) 56(84) bytes of data.
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=1 ttl=64 time=0.015 ms
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=2 ttl=64 time=0.029 ms
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=3 ttl=64 time=0.029 ms
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=4 ttl=64 time=0.029 ms
--- rac1.mydomain.com ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3000ms
rtt min/avg/max/mdev = 0.015/0.025/0.029/0.007 ms
I am trying to find IP address. In a socket programming tutorial, I found :
Code:
$ nslookup localhost
command. It gives me a address. However, one colleague told me :
Code:
$ ifconfig
It also returns me inet_addr. But both are different. Kindly tell me the correct method to find IP address? I have also checked the /etc/hosts file but it says "localhost"
I'm finding that I can not resolve .local domains anywhere except with nslookup and found on the LucidLynx release notes that there is a problem with avahi causing this. Although the avahi service is convenient for locating printers and such can anyone else tell me what other services/options will be impacted on a default installation of Ubuntu if I disable this service?
View 1 Replies View RelatedDon't work nslookup from clients guest OS.I have LinuxMint 7 and I'm installed VirtualBox on her. I created three guests OS. Two CentOS and XP
Name
The first CentOS linux1.starline.ca
The second CentOS centos.starline.ca
The third XP xp2.starline.ca[code].....
On the clients guest OS nslookup don't work. It write : timed out; no servers could be reached .What is going on? Why nslookup don't work from clients guest OS?On client machine in the file /etc/resolv.conf have record ameserver 168.135.88.2
I'm trying to find a command to tell nslookup, "I want you to try to resolve hostname X using DNS server Y, and if the lookup fails, just output failure do NOT fail over to some other DNS server as a backup and use it to try to resolve the same hostname."I'm trying to follow the man page instructions for doing this, but it doesn't seem to work. The man page for nslookup on my system (CentOS 5.5) includes the line:
"[no]fail Try the next nameserver if a nameserver responds with SERVFAIL or a referral (nofail) or terminate query (fail) on such a response."But if I try using that option, the output seems to indicate that after the lookup failed on ns1.afraid.org, nslookup failed over to 208.67.220.220 (the first nameserver listed in my resolv.conf -- an OpenDNS nameserver) and used it to resolve the hostname instead.
Recently I installed RedHat Enterprise 5 on a windows machine. The machine is configured to use DHCP, but I have been seeing some strange behavior if I do nslookup on the machine's IP:
[someuser@lin01 mydir]$ nslookup 10.5.x.x
Server: 10.10.x.xx
Address: 10.10.x.xx#53
x.x.5.10.in-addr.arpa name = xyz.something.
x.x.5.10.in-addr.arpa name = lenovo-d1690047.
x.x.5.10.in-addr.arpa name = pqdlds.
x.x.5.10.in-addr.arpa name = lin01.mydomain.com.
Where only the last entry of [URL] is actually correct, how can remove the other entries? I spoke to my IT Manager and he cannot see these stale entries in the DNS (we are using windows AD)
When i enter ip or address nslookup does not reply any answer. It shows no server found. "servfail". This is my named.conf file:
[Code]....
HOW TO GET THE IP ADDRESS OF HOST IN LINUX WITH USING OF HOST AND NSLOOKUP COMMAND and after getting the ip address how to assign it in the variable
View 4 Replies View RelatedI installed debian etch on my system. Installation done successfully, but when it boots up the X server is not starting and showing error. Note : It is perfectly working with debian lenny. Configuration : Intel DG41RQ ,1GB Ram ,160GB HDD.
View 1 Replies View RelatedI'm on a Debian Lenny 64Bit OS and the WPA key is not working.
I've got an Atheros AR5212/AR5213 chipset on an Airlink 101 AWLH4130 card.
Also, here's the /etc/network/interfaces
I want to install php 5.3 on debian wheezy
/etc/apt/sources.list
Code: Select alldeb http://http.debian.net/debian wheezy main
deb http://http.debian.net/debian wheezy-updates main
deb http://security.debian.org wheezy/updates main
/etc/apt/preferences.d/preferences
[Code] .....
I don't know why apt pinning not working.
No matter what I try I just cant get cron working for me on my Squeeze setup I can type /usr/bin/soffice and openoffice will fire up no problem but put into a crontab and nothing for instance just to test if crontab is working I have this/5 * * * * /usr/bin/sofficeIn y user crontab but nothing happens I have run as root crontab -u djt crontab And after editing the crontab with crontab -e it says it is installing crontab but it just does nothing Unfortunately I am connected to my works network so unable to receive internal mail from cron so cant find any reason for it not working
View 4 Replies View RelatedI just updated to a new Kernel, in Squeeze. So far everything seems to be working properly but NetworkManager. It shows that I am not connected but I obviously am because I am posting this thread. When I click on the icon in the bar by the clock, with active applications, it does not show any networks available, even though I have wireless and networking enabled
View 5 Replies View Relatedcan't get my microphone to work. Here is the output for: dmesg | grep input
[code]...
I use my debian machine for masquerading, packet filtering anilar for a tiny network.It runs the latest debian testing.Every now and then (i am talking about weeks) the connection to my internet stops working.ifdown eth0; ifup eth0 brings it back.The other interface (eth1) is never effected.The odd thing is, there are no warnings, no messages .. nothing.I cant find any entry. Nothing in the logs, nothing in dmsg and no kernel panic.The only way to find out when it might have been happened is to search in several daemons log files,to find out when their first error connecting to the internet occurred.I ran memtest without any results.The nic is e1000 compatible.
View 2 Replies View RelatedI installed Debian Squeeze yesterday and I got almost everything working except for the backspace key in any browser I've tried..I'm running it on HP Mini 210 if that can help w/ something and one more i tried upgrading it to testing but a verry long and boring text file appears and to close it and continue, i have to press the end button the problem is that i do not have one .. i've tried every single other key on the keyboard - still nothing.
View 1 Replies View RelatedI have an Acer Aspire 7720Z, and running Debian Squeeze/Sid. My problem is the cpu fan is not working, and I don't have a clue how to solve the problem. When the CPU temperature becomes too high, the laptop stops, so it's very annoying. I can't compile anything, or run an "heavy" software.
The fan is working, just after the boot before grub menu or under Windows Vista there is no problem so that is not a hardware problem.
I've installed lm-sensors, the output is
acpitz-virtual-0
Adapter: Virtual device
[Code].....
In order to save power and to cool down my Debian system a little bit, I installed cpufregs the other day and changed it the cpu gonever to on_demand.
Well I came back to the box today and powertop tells me that the cpu has been running at 2.66ghz (max freq) for 99/99% of the time.
Running cpufreq says this: Code: analyzing CPU 0:
driver: p4-clockmod
CPUs which need to switch frequency at the same time: 1
hardware limits: 333 MHz - 2.67 GHz
[Code].....
I recently installed Squeeze, installed several applications via the package manager and almost universally, the help menus don't function. Flash is installed and works for Iceweasal, at least I can watch a ..... vid.
View 3 Replies View RelatedI have XP and win 7. I want to triple boot with Debian.When I install, grub finds win 7 and XP and says everything should be fine, but then when I boot, only debian appears.This was fixed by doing update-grub2 after logging in.Now, I have win 7 bootloader as an option. However, when I boot into XP, and then reboot, grub disappers. he screen just says welcome to grub and then a blinking cursor.
View 10 Replies View RelatedI have a ts3.desktop file in my /usr/share/applications folder that I want to run on system boot. I have typed the following commands which don't work
Code: Select allcrontab -e
Then in the editor, I typed the following line at the bottom of file. I also made the necessary carriage return after this line.
Code: Select all@reboot gtk-launch ts3 /usr/share/applications
Then I pressed ctrl+o to save it.
After I put these commands in, I did the following command to troubleshooting this issue, see below.
Code: Select all$ crontab -l
no crontab for server
$ps -ef | grep cron | grep -v grep
root 532 1 0 21:35 ? 00:00:00 /usr/sbin/cron -f
But after I reboot and nothing happens, the application doesn't start.
I have Inceweasel 31.8.0 installed on LXDE Debian Wheezy and I am trying to make AdBlock Plus work. The thing is that I get pop-ups from any site, Youtube ad videos, etc. all the time, just like I have nothing installed to prevent that.
I tried:
- Installing AdBlock from Iceweasel add-ons, with a suscription to easylist ;
- installing xul-ext-adblock-plus (also with the same suscription).
With each configuration or even with none of them, I get the same results as described above. Is there anything I can do ?
By the way, I don't get Youtube ad videos on Chromium with Adblock installed through the Chrome webstore.
php5-memcached is working without problems but has no igbinary support.
So i did:
Code: Select allwget https://pecl.php.net/get/memcached-2.2.0.tgz
tar -xzvf memcached-2.2.0.tgz
cd memcached-2.2.0
phpize
./configure --enable-memcached-igbinary
make
make test
make install
And also put
Code: Select allextension = /usr/lib/php5/20131226/memcached.so
in the php.ini
But memcached is not loading??
It's Nginx with FPM/FastCGI PHP 5.6.14-0+deb8u1
After installing 3.5.6 from backports, applets stopped working. I installed the java-6-sun package but it's still not making it. Searched google but haven't found anything but some bug fixes. Also saw something about ipv6, but not sure if that's related. That seemed to affect java programs. I use jedit and that is working fine. I downloaded the latest SDK from Sun and created a link from /usr/lib/mozilla/plugins and /usr/lib/iceweasel/plugins and /usr/lib/mozilla-firefox/plugins to /opt/SDK/jdk/jre/plugin/i386/ns7-gcc29/libjavaplugin_oji.so. Prior to the update to 3.5.6, the plugins were working and I could get the ..... stuff etc.
View 8 Replies View RelatedInstall openssh so that I can access my desktop (192.168.1.100) from my laptop (192.168.1.200) using konqueror with "fish".Googled and read that the sshd_config should be updated to enhance security.Tried fiddling with sshd_config on the desktop and hit a brick wall.Before setting ListenAddress 192.168.1.200 in sshd_config, the laptop can access the desktop with problem.However, after setting it, the laptop is not able to access the desktop.
View 4 Replies View Related