I am buying a server 2 day ago and installed CentOS 5 (64 bit) . But i have a problem .My server FTP have folders :
_________________________
maildir
admin_backups
domains
imap
public_html
user_backups
__________________________
I cannot access usr / local directory.usr / local directory, how can I access? usr / local does not appear FTP.And i get an error : libmysqlclient.so.15
I am not able to access the directory /usr/local. But when I do ls I am able to see it.
Code:
[root@indra ~]# ls -ld /usr/local
drwxr-xr-x 2 root root 0 Feb 9 12:11 /usr/local
[root@indra ~]# cd /usr/local
-bash: cd: /usr/local: No such file or directory
[root@indra ~]#
New XAMPP security concept: Access to the requested directory is only available from the local network. This setting can be configured in the file "httpd-xampp.conf". If you think this is a server error, please contact the webmaster.
View 9 Replies View RelatedRunning Ubuntu 9.10. In the Remote Desktop config dialog I get: "Your desktop is only reachable over the local network. Others can access your computer using the address 127.0.0.1 or tabatha.local." I understand this means only the loopback ip address is available. All my other machines show their true local ip address (e.g., 192.168.1.104) in this dialog. Thus I cannot log on to this desktop from other machines.
When I try to do a remote logon from another Ubuntu 9.10 box (or from an XP box using a VNC viewer), I get: "Connection to 192.168.1.102 has been closed." What steps are needed to make this machine show its actual ip address? All file sharing between the various machines is working properly and all windows shares back and forth between XP and 'nix, and among the the vaious XP boxes and linux boxes are available as designed.
kernal 2.6.38-8 After updating Kubuntu-the log in screen will not progess to the desktop. It freezes and then shows the message "no write access to the home directory.." Goggling the problem - references to an .ICEauthority in my home directory are mentioned as linked to this problem. However "ls -la /home/charles" reveals that there is no .ICEauthority file present.
View 6 Replies View RelatedI am trying to install tilp, a program for the link between a computer and a Texas Instruments calculator. I have downloaded all the packages to a local directory. I tried telling yum to install all the packages at the same time, though, the dependencies still fail to resolve (though they are all in the directory). I don't know if it would be safe to force install without the dependencies (even though I would install them later).
View 4 Replies View RelatedI'm trying to install this program, which consists of simply unzipping the file MyPasswords_2_61_Portable.zip into a new directory /usr/src/MyPasswords. When in that directory I can start the progam OK with sh MyPasswords.sh.
However if I create a launcher sh /usr/src/MyPasswords/MyPasswords.sh nothing happens and if done from a normal terminal I get 'Unable to access jarfile MyPasswords.jar which resides in the new directory.
Adding /usr/src/MyPasswords to the $PATH by editing my .bash_profile hasn't made any difference.
I have added a new user by following command :
root# useradd -u 100 -g 120 -d /product -s /bin/bash sandesh
I am not able to access it in /export/home directory..?
Seismicmike here. My first post. I'll try to be as clear and concise as possible. For the sake of this post, I'm going to use 1.2.3.4 as a place holder for my public IP. On my web server, I would like to be able to access the /var/ftp directory through a web browser. I have successfully done so with Google Chrome, but I cannot access the directory in Firefox or IE. Both FF and IE ask me for authentication but then time out attempting to load the directory.
I suspect that there may be something up with switching to passive mode and/or that this issue may be more with my configuration of Firefox and not with the server (seeing as how Chrome works). Another possibility may be related to SSL. When I connect with FileZilla, I have to use the FTP over Explicit SSL/TLS option in order to connect. In any case I still would like to fix it. I would also like to avoid having to install FireFTP if at all possible.
Steps to reproduce (not that you can without my actual IP =J):
* Open Chrome
* Go to ftp://1.2.3.4
* Enter username
* Enter password
[code]....
I am a student studying computer science course.
Well, I am facing problem when doing lab questions.
I must use DLXLinux bundled in Bochs (bochs.sourceforge.net).
I am required to use the /usr/local directory.
In /usr directory, there is no directory named 'local' but there is one thing called 'local@'. So, when I try to use mkdir command to create 'local' directory in /usr , there are error "cannot make directory.....".
Look at my screenshot at [url].
I want to update all the machines in the network from a central repository which is on my master server and whose archive directory is shared through samba.I searched in the man page of sources.list and found that there is an option for this but can't able to implement this. Can anybody kindly tell me the way to do the same.
View 1 Replies View RelatedI have installed a web server on my local network. Everything is well configured and web pages are shown correctly from Internet (outside the local network) using the domain or the public IP.The issue is if I try to see that web pages (using the domain or the public IP) from inside the local network. In that case the router config page (192.168.1.1) is shown instead of the web pages.From inside the local network I'm only able to see the web pages using the internal IP address (192.168.1.XX).
View 2 Replies View RelatedI set up freenx server and set up a client on same machine and now when I go to my logs it crashs and bugzilla save before it can crash. I go to send info and the page says bugzilla wont work and gives a 999 code need newer gnome??
**this is when I go to the logs page
Distribution: CentOS release 5.4 (Final)
Gnome Release: 2.16.0 2007-02-18 (CentOS)
BugBuddy Version: 2.16.0
[Code]....
On my Centos 5 box my internet won't work. I am unable to get update and I can't download any native programs. But I have Samba running and I am able to access all my files for my other computers.
View 6 Replies View RelatedI am trying to access my company VPN using my Centos 5.5 laptop. I have the vpn client certificate issued by my company's IT dept. I am able to access the webmail using the same certificate which I installed in firefox. But I would like to know how to use this certificate to sign in to the VPN. Some of my colleagues use the Cisco VPN client v5.0.? software and the vpn client certificate to login. It works fine. But I would like to do the same with Centos.I tried connecting using vpnc. I converted the pcf file to conf using pcf2conf. Converted the certificate to .pem file. I replaced the /etc/vpnc/default.conf file with the pcf2conf converted file. Following is the converted conf file:
IPSec gateway example-vpn.companyname.com
IPSec ID <groupid>
IPSec secret <groupsecret>
[code]....
I've installed centos 5 on an old computer with success and it works great.I can access the web server hosted on the centos server from any computer on the wireless and wired local network. I can also use ssh (putty) and nx client from any computer on the local network (wired and wireless) to access the centos server.On the wireless router I've configured a port forwarding to the wireless network interface on the centos server. I can access the centos server from the outside (internet) through this port forwarding both through http and ssh or nx client.MY problem is that I can't access the centos server from the internet through the wired network interface. Any attempt to view a web page or login with ssh or the nx client will timeout.
View 9 Replies View RelatedWe have a server were we no longer seem to be able to gain access, neither locally or remotely.When we try to connect via SSH we get a "Connection Refused". We have checked that it's not our standard firewall blocking the request, so it can either be the local firewall (which we disabled when installing) or that the process isn't running.However, when we try to login locally on the machine (as root) all we get is "Login failed". We've tried restarting the machine in single user mode to change the root password, and while we can do this succesfully, it still doesn't give us access when rebooting the machine afterwards.No other users (besides the standard users created when installing) are available on the server, so we can't say if this is a problem with the root account, or with logging on in general.
View 1 Replies View RelatedI'm running CentOS 5.5 with a hardware Areca controller (Raid 10). I initially installed a machine and rsynced the file system to a third machine; I'm then pulling in the file system to new machines and updating grub with a script to make it bootable.
I've done this before with other machines (no raid sets) but with these machines I'm running into errors code...
I face a problem with my server after i rebooted it i got a message on start up tell me that " Unable to access resume device (label=swap-sdb3) " and the system doesn't startup
the error message exactly is
Unable to access resume device (lable=swap-sdb3)
Creating root device.
Mounting root filesystem.
[ 3.305354] EXT-fs (md1) : error : unable to read superplock
mount: error mounting /dev/root on sysroot as ext3 : invalid argument
[Code]....
From my office and home, I can access a web service, no problem. However, from my server at the data center, I cannot. Could this be a DNS issue? I've tried with iptables enabled and disabled. selinux is disabled. This server has multiple network interfaces, one public and two private. The public has a WAN IP address (1.1.1.1), the private is 10.1.10.2 and the other private is connected via crossover cable to another server 192.168.100.1. I think route -n tells me the WAN interface is used to access the internet, as its gateway is my ISP's upstream gateway. CentOS 5.5.
View 4 Replies View RelatedI am running a VPS of CentOS. clock command doesn't work.[174-37-247-102.lx-vs.net ~]# clock hwclock is unable to get I/O port access: the iopl(3) call failed. How to solve the problem? I have tried "timeconfig" and set to New York and System Clock uses UTC and restart the server but it was not useful.
View 2 Replies View RelatedThis is Mushtaq here. I am using CentOS 5.3. Everything works fine regarding Hardware Support except of External Hard Disk. I have a HDD Western Digital 80 GB in USB converted case. Its working fine under WinOS, Fedora 10 / 11 / 12 + & RedHat Enterprise Linux. But CentOS is unable to access it even it does not detect it (fdisk -l command is used to verify the connected disks). Can any one please help me in this regard, I am fed-up of this situation.
View 1 Replies View RelatedCan't log into my XFCE desktop like I normaly do. all the sudden I get notified that my xsession lasted less then 10 secondsLooking at the error I can see this:
Unable to access file /home/username/.iceauthority: No such file or directory
Using failsafe I can start a terminal. From terminal I tried to start X
Code: sudo startx Result: Running on desplay:0
So I tried to run this;
Code: sudo startxfce4 And I get up a graphical desktop.
So this is not a critical situation as I easily can use this method to log on, but as there has been something causing this I would like to be able to resolve this nonetheless. Btw it is not the old chmod trick in play here, cause my .iceauthority file is gone alltogheter.
I can't be the first one with this problem. What am I missing?
I have setup Samba servers in the past, just none under SELinux. The last one I configured was a couple years ago, so I wouldn't doubt I'm a bit rusty.
---- Environment summary:
Clean server install of CentOS 5.4 includes SELinux
- lets call this 'server'
- updated samba to 3.0.33-3.15.el5_4.1
Client1 - Windows XP sp4 - WINS configuration uses 'server' noted above
Client2 - Windows Vista - WINS configuration uses 'server' noted above
---- What works / what doesn't ------
Clients can see the server (XP and vista) in network neighborhood.
The following does not work from windows (xp or vista)
net view
net view \server
net view \server-ip
net view \servershare
This does work on the server
smbclient -L \server
smbclient -L \server --user validuser
smbclient -L \client1 --user validuser
---- What I have configured and tried (config/output below) --------
firewall ports for samba are open
SELinux enforcing or permissive
file context is set on share
samba booleans are set
***firewall
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p tcp --dport 445 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 137 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 138 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p udp --dport 139 -j ACCEPT
***SELinux mode/booleans
# sestatus
SELinux status: enabled
SELinuxfs mount: /selinux
Current mode: permissive
Mode from config file: enforcing
Policy version: 21
Policy from config file: targeted
# getsebool -a | grep smb
allow_smbd_anon_write --> off
smbd_disable_trans --> on
# getsebool -a | grep samba
samba_domain_controller --> on
samba_enable_home_dirs --> on
samba_export_all_ro --> off
samba_export_all_rw --> off
samba_share_fusefs --> off
samba_share_nfs --> off
use_samba_home_dirs --> on
virt_use_samba --> off
***filesystem
# semanage fcontext -a -t samba_share_t �/share/photos(/.*)?�
# restorecon -R -v /share/photos
***Disks
]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda3 9920624 2070872 7337684 23% /
/dev/sda1 101086 19146 76721 20% /boot
tmpfs 1846656 0 1846656 0% /dev/shm
/dev/mapper/VolGroup00-xen
100791728 202540 95469188 1% /xen
/dev/mapper/VolGroup00-photo00
251981556 191716 238989840 1% /share/photos
/dev/mapper/VolGroup00-dmsdoc00
100791728 192256 95479472 1% /share/alfresco
none 1846656 104 1846552 1% /var/lib/xenstored
***smb.conf
[global]
workgroup = workgroup
netbios name = server
security = user
name resolve order = wins hosts lmhosts bcast
encrypt passwords = yes
hosts allow = 192.168.0.
hosts deny = 192.168.122.
interfaces = eth0
passdb backend = tdbsam
oslevel = 222
local master = yes
domain master = yes
preferred master = yes
cups options = raw
username map = /etc/samba/smbusers
wins support = yes
log level = 4
guest ok = yes
[photo]
comment = Photos
path = /share/photos
read only = yes
guest ok = yes
Unable to get update or download any native programs. But able to access file from Samba
View 1 Replies View RelatedRecently I mounted a larger partition into my home directory since I was running out of space, Everything went smoothly, but it caused me to wonder about something I cant figure out. While playing with the mount unmount commands when I was copying everything over... before editing my fstab.
Is there a way to access the files that existed in a directory before you mount a partition to that directory? after mount the original files are gone.unmount and they are back, Where do they go?
I'm using Mac OS X's Terminal.app shell to compile and run Fortran programs. One such program resides outside of my home directory (it is in the Applications folder, which resides on my hard drive but seems to be outside of my home folder). How can I navigate into this directory using Terminal.app to run the programs that reside there?
View 7 Replies View Relatedhow could I create a directory in /usr/local such that only certain group or user could have read write and execute privileges?
View 1 Replies View RelatedI am installing a cluster which is hidden from the rest of the world and there is no router either froma general login node. I would therefore require a local repository of the updates to CentOS5.4. When I checked I only found instructions for a full mirror. As I have no room and neither the human resources to setup and maintain a full-blown mirror, this is not a solution. However if I try to find updates for 5.4 to download in a repository-type of way I fail to find a solution. Maybe I am just not looking in the right places.
View 1 Replies View RelatedI have recently installed Fedora 12 on a desktop PC and as my first experience of Linux, I am really impressed. I have now installed several packages and have reached a point where I would like to share the PC with other user (family members in the same house).My question seems so basic I am almost embarrassed to ask it but could some one explain the best way to create a local shared directory that could be used to store files accessible to everyone (e.g. music, photos, videos, documents etc.)There will be three users and as it is a family PC, they will all have full access.
Reading posts from various forums, I am little confused about what is the best way to proceed (i.e. what is Linux best practice). The simpler of the two methods is to simply make the directory using the mkdir command, followed by the chmod command to assign full access rights. Fore example if the local shared directory is called 'share'. The alternative approach assigns a group, a group administrator etc and then adds users to the group.