I set up freenx server and set up a client on same machine and now when I go to my logs it crashs and bugzilla save before it can crash. I go to send info and the page says bugzilla wont work and gives a 999 code need newer gnome??
**this is when I go to the logs page
Distribution: CentOS release 5.4 (Final)
Gnome Release: 2.16.0 2007-02-18 (CentOS)
BugBuddy Version: 2.16.0
[Code]....
Is it possible for vsftpd to have logs so I can see IP addresses user has used to connect to FTP ?
View 3 Replies View RelatedI don't mind that apache logs "rotate". By that, I mean that periodically the most recent log is renamed "*.1" and the older logs are bumped up a number In my particular situation, I do mind that the log that was "*.4" is deleted rather than being renamed to "*.5" when that periodic renaming happens.
I know most of the other /var/log files have the same behavior. What does this? Can I change it so my apache logs are "rotated" up but aren't deleted? I know this will take some hard drive space, but I have a lot of it.
EDIT: CentOS 5.3, kernel 2.6.18-128.1.6.el5, Apache 2.2.3
On our app server the logs from the Sybase Mobilink service get logged to /var/log because of that I did a chmod a+rx /var/log and all is well until.... the next day QA logs in goes to check the logs and gets:
Quote:
qa@dwdb [~]$ ls /var/log
ls: /var/log: Permission denied
qa@dwdb [~]$
On my Centos 5 box my internet won't work. I am unable to get update and I can't download any native programs. But I have Samba running and I am able to access all my files for my other computers.
View 6 Replies View RelatedI am trying to access my company VPN using my Centos 5.5 laptop. I have the vpn client certificate issued by my company's IT dept. I am able to access the webmail using the same certificate which I installed in firefox. But I would like to know how to use this certificate to sign in to the VPN. Some of my colleagues use the Cisco VPN client v5.0.? software and the vpn client certificate to login. It works fine. But I would like to do the same with Centos.I tried connecting using vpnc. I converted the pcf file to conf using pcf2conf. Converted the certificate to .pem file. I replaced the /etc/vpnc/default.conf file with the pcf2conf converted file. Following is the converted conf file:
IPSec gateway example-vpn.companyname.com
IPSec ID <groupid>
IPSec secret <groupsecret>
[code]....
I am buying a server 2 day ago and installed CentOS 5 (64 bit) . But i have a problem .My server FTP have folders :
_________________________
maildir
admin_backups
domains
imap
public_html
user_backups
__________________________
I cannot access usr / local directory.usr / local directory, how can I access? usr / local does not appear FTP.And i get an error : libmysqlclient.so.15
I've installed centos 5 on an old computer with success and it works great.I can access the web server hosted on the centos server from any computer on the wireless and wired local network. I can also use ssh (putty) and nx client from any computer on the local network (wired and wireless) to access the centos server.On the wireless router I've configured a port forwarding to the wireless network interface on the centos server. I can access the centos server from the outside (internet) through this port forwarding both through http and ssh or nx client.MY problem is that I can't access the centos server from the internet through the wired network interface. Any attempt to view a web page or login with ssh or the nx client will timeout.
View 9 Replies View RelatedWe have a server were we no longer seem to be able to gain access, neither locally or remotely.When we try to connect via SSH we get a "Connection Refused". We have checked that it's not our standard firewall blocking the request, so it can either be the local firewall (which we disabled when installing) or that the process isn't running.However, when we try to login locally on the machine (as root) all we get is "Login failed". We've tried restarting the machine in single user mode to change the root password, and while we can do this succesfully, it still doesn't give us access when rebooting the machine afterwards.No other users (besides the standard users created when installing) are available on the server, so we can't say if this is a problem with the root account, or with logging on in general.
View 1 Replies View RelatedI'm running CentOS 5.5 with a hardware Areca controller (Raid 10). I initially installed a machine and rsynced the file system to a third machine; I'm then pulling in the file system to new machines and updating grub with a script to make it bootable.
I've done this before with other machines (no raid sets) but with these machines I'm running into errors code...
I face a problem with my server after i rebooted it i got a message on start up tell me that " Unable to access resume device (label=swap-sdb3) " and the system doesn't startup
the error message exactly is
Unable to access resume device (lable=swap-sdb3)
Creating root device.
Mounting root filesystem.
[ 3.305354] EXT-fs (md1) : error : unable to read superplock
mount: error mounting /dev/root on sysroot as ext3 : invalid argument
[Code]....
From my office and home, I can access a web service, no problem. However, from my server at the data center, I cannot. Could this be a DNS issue? I've tried with iptables enabled and disabled. selinux is disabled. This server has multiple network interfaces, one public and two private. The public has a WAN IP address (1.1.1.1), the private is 10.1.10.2 and the other private is connected via crossover cable to another server 192.168.100.1. I think route -n tells me the WAN interface is used to access the internet, as its gateway is my ISP's upstream gateway. CentOS 5.5.
View 4 Replies View RelatedI am running a VPS of CentOS. clock command doesn't work.[174-37-247-102.lx-vs.net ~]# clock hwclock is unable to get I/O port access: the iopl(3) call failed. How to solve the problem? I have tried "timeconfig" and set to New York and System Clock uses UTC and restart the server but it was not useful.
View 2 Replies View RelatedThis is Mushtaq here. I am using CentOS 5.3. Everything works fine regarding Hardware Support except of External Hard Disk. I have a HDD Western Digital 80 GB in USB converted case. Its working fine under WinOS, Fedora 10 / 11 / 12 + & RedHat Enterprise Linux. But CentOS is unable to access it even it does not detect it (fdisk -l command is used to verify the connected disks). Can any one please help me in this regard, I am fed-up of this situation.
View 1 Replies View RelatedI can't be the first one with this problem. What am I missing?
I have setup Samba servers in the past, just none under SELinux. The last one I configured was a couple years ago, so I wouldn't doubt I'm a bit rusty.
---- Environment summary:
Clean server install of CentOS 5.4 includes SELinux
- lets call this 'server'
- updated samba to 3.0.33-3.15.el5_4.1
Client1 - Windows XP sp4 - WINS configuration uses 'server' noted above
Client2 - Windows Vista - WINS configuration uses 'server' noted above
---- What works / what doesn't ------
Clients can see the server (XP and vista) in network neighborhood.
The following does not work from windows (xp or vista)
net view
net view \server
net view \server-ip
net view \servershare
This does work on the server
smbclient -L \server
smbclient -L \server --user validuser
smbclient -L \client1 --user validuser
---- What I have configured and tried (config/output below) --------
firewall ports for samba are open
SELinux enforcing or permissive
file context is set on share
samba booleans are set
***firewall
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p tcp --dport 445 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 137 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 138 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p udp --dport 139 -j ACCEPT
***SELinux mode/booleans
# sestatus
SELinux status: enabled
SELinuxfs mount: /selinux
Current mode: permissive
Mode from config file: enforcing
Policy version: 21
Policy from config file: targeted
# getsebool -a | grep smb
allow_smbd_anon_write --> off
smbd_disable_trans --> on
# getsebool -a | grep samba
samba_domain_controller --> on
samba_enable_home_dirs --> on
samba_export_all_ro --> off
samba_export_all_rw --> off
samba_share_fusefs --> off
samba_share_nfs --> off
use_samba_home_dirs --> on
virt_use_samba --> off
***filesystem
# semanage fcontext -a -t samba_share_t �/share/photos(/.*)?�
# restorecon -R -v /share/photos
***Disks
]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda3 9920624 2070872 7337684 23% /
/dev/sda1 101086 19146 76721 20% /boot
tmpfs 1846656 0 1846656 0% /dev/shm
/dev/mapper/VolGroup00-xen
100791728 202540 95469188 1% /xen
/dev/mapper/VolGroup00-photo00
251981556 191716 238989840 1% /share/photos
/dev/mapper/VolGroup00-dmsdoc00
100791728 192256 95479472 1% /share/alfresco
none 1846656 104 1846552 1% /var/lib/xenstored
***smb.conf
[global]
workgroup = workgroup
netbios name = server
security = user
name resolve order = wins hosts lmhosts bcast
encrypt passwords = yes
hosts allow = 192.168.0.
hosts deny = 192.168.122.
interfaces = eth0
passdb backend = tdbsam
oslevel = 222
local master = yes
domain master = yes
preferred master = yes
cups options = raw
username map = /etc/samba/smbusers
wins support = yes
log level = 4
guest ok = yes
[photo]
comment = Photos
path = /share/photos
read only = yes
guest ok = yes
We had recently got some problem with our server(local server) and we recently upgraded from Ubuntu server 8.04 to 10.04 and we were not able to access awstats logs from web.So can any one say a method to get back the logs from the server?
View 1 Replies View Relatedi am monitoring access log messages in squid proxy server,can it possible to get date,time,day in access logs is it possible
View 2 Replies View RelatedIs there any way to delete squid proxy access logs. e how can the access logs be deleted
View 6 Replies View RelatedIn a squeeze box, I installed awstats and it's working like a charm. Its cron job update the awstats database every 10 minutes (as it runs as root). But I would like to be able to update the statistics from the browser as well. So I setup everything as required and I gave "read" access to "others" to every apache log file. Now, a couple of questions came to my mind:
1. Am I compromising server's security giving "read" access to "others" to apache log files?
2. Instead of giving "read" access to "others", I could add www-data user to adm group (as apache log files are owned by root:adm and permissions are rw-r----). Is this more secure than giving "read" access to "others"? 3. If the option would be giving "read" access to "others" at the end, a log file would be owned by root:adm and its permissions be rw-r--r--. As apache rotates its log files, when Apache create a new log file, does it preserve the permissions (rw-r--r--) or create it with the default permissions (rw-r-----)?
Unable to get update or download any native programs. But able to access file from Samba
View 1 Replies View Relatedi get file system errors on boot up. found logs in /var/logs but cant access them. second best thing i can do is to re-install debian but no one seems to want to say how thats done. my disk wont run in wine (some error i dont remember) so i cant use my CD /flashdrive to re-install.
1) i need to read the log files and try to fix the install
2) if i cant fix i need to know how to wipe the OS and do a fresh install
I am new to web server support. I have a request from my management to modify the logging slightly. Effectively I need to redirect a custom string from our http response into the apache access logs. When a user navigates to our site they receive a "dye" number that is associated with them. This number follows them to whatever cluster they are directed too. The string is formatted as such, com-company-dye: d0a2#6dfce. I need that that header dye to appear in the access logs so we can use that dye number as a key for troubleshooting issues though out our various monitoring systems.
View 3 Replies View Relatedon opensuse 11.1, i was able to see my system logs using yast. but on opensuse 11.3 i'm not able to find it
View 9 Replies View RelatedWe are forwarding logs (perl script executed logs) to one Red Hat Linux box. We have to get 97 logs for each time the script runs. But we see inconsistent number of logs coming to Linux box. Like one time we got 56, other time 3 , other time 43.. like this.. We are sure that 97 logs are being forwarded. Checked the Rsyslog.config filer any filters and couldn't see any filter dropping them. When we run the tcpdump, we can see 97 connections, but logs are not there in specified location.
View 1 Replies View Relatedwants some sort of logging capability on the system. to have a log of every change to every file, although that might be a bit unwieldy. perhaps a simpler compromise would be some way of monitoring a few specific folders, and tracking all changes to them, including the user that did so. Particularly important is that it should be possible to work with access through samba, as we want to track what users on the network are creating or changing files. Is there functionality like this already built into debian or samba? is there a useful additional app to gather this information? or am I going to need to be grep'ing log files to present something useable?
View 2 Replies View RelatedJust installed CentOS 5.4 selecting Server configuration where web server was installed.
After install, I browsed to the ip of the box and no apache test page shows up. /var/log/httpd/error_log doesn't show any browse attempts.
service httpd start
OK
try again and no browsing.
Did a :
yum install httpd
it installed httpd.i386 along some other dependencies.
Did a:
service httpd restart
OK
and still not browsing.
basics of getting apache running and configured on a fresh server?
I have a logserver.log located at /usr/local/logserver. It's NSLOGDEPTH=100. I'm not sure if this is the reason but my log file is only up to 100 only..samplelogserver001.loglogserver002.log......logserver100.logThe other logs were already removed. I do not have any scripts on logrotate for this specific logs. My question now is: How can I move some logs automatically so that it will not be removed totally from the system. I'm planning to move it locally on the server and compressed it at the same time. My second plan is to move it on another server. Do I need to create a script on this or can be done on logrotate? (note: i do not want to remve old logs)
View 1 Replies View RelatedIs there any way of getting the build logs of the CentOS packages? I'm dealing with a possible build problem in CentOS's Samba similar to [URL], so it would be very useful to have the build logs available to check for such dependency problems, etc.
View 6 Replies View RelatedMy server is rebooting frequently(4 to 5times a day) without any logs, can any one help me out to fined the cause for the unexpected reboots of the server. reboot system boot 2.6.18-194.3.1.e Fri Feb 4 15:16 (00:-24)
[root@elastix log]# cat /etc/redhat-release
CentOS release 5.5 (Final)
[root@elastix log]# uname -a
Linux elastix 2.6.18-194.3.1.el5 #1 SMP Thu May 13 13:09:10 EDT 2010 i686 i686 i386 GNU/Linux
[code]...
I have this server that runs Tomcat . this server sends mail with localhost as MTAthe local MTA is sendmail (with the default settings) . from time to time i have this strange thing and the emails it sends never reach the destination. the log shows it left the server , but looking at the logi see that the time on the log is wrong . sometime its correct and ometines its +2 hours. i guess this email are bounced at the destinationfor sending at future time . all this email that didnt reach the destination have this in common
Feb 22 15:47:44 BE00 sendmail[12969]: n1MDlikZ012969: from=<support@example.com>, size=5912, class=0, nrcpts=1,
msgid=<5269969.391235310464949.JavaMail.tomcat@BE00.example.com>, proto=ESMTP, daemon=MTA,
[code]....