CentOS 5 Networking :: System-config-authentication Is Not Starting?
Sep 6, 2010
I trying to set up a LDAP server using openLDAP / db4. The server runs fine but I cannot get the client to work. Client and server are on the same machine, as for now. The problem seems to be in PAM. However I cannot start the system-config-authentication tool which should do the trick.
Environment
=========
CentOS release 5.4 (Final)
Software
======
authconfig-gtk-5.3.21-6.el5
system-config-securitylevel-tui-1.6.29.1-2.1.el5
system-config-network-tui-1.3.99.18-1.el5
[Code]....
View 3 Replies
ADVERTISEMENT
Oct 15, 2009
I am running centos 5.3 with the latest bind, i have made some changes in the config and now it wont start.
Fel i named-konfigurationen:/etc/named.conf:27: unexpected end of input (last line)
My named.conf looks like this:
options { directory "/var/named/";
};
view "externt" {
match-clients { any; };
recursion no;
zone "dala.hk" {
type master;
file "dala.hk";
};
zone "0.0.168.192.in-addr.arpa." {
type master;
file "1.0.168.192.in-addr.arpa";
};
};
view "intern" {
match-clients { 192.168.0.0/8;};
zone "intern" {
type master;
file "intern;
};
};
View 2 Replies
View Related
Jul 13, 2010
I have LDAP server but I'm not admin. When I type: ldapsearch -x -b "ou=2007,o=faculty" "cn=7username"
View 11 Replies
View Related
May 25, 2011
I would like to know what is OpenSuse application that does the same job of RH's system-config-authentication application. I need to test Active Directory authentication while setting up Samba file server to use AD accounts and ACLs.
View 2 Replies
View Related
Nov 14, 2009
I can no longer start cups with system-config-services (System->Administration->Services). I am prompted for the root password but it is not accepted. I can start cups in a terminal with
Code:
$ su
Password:
[code]....
View 2 Replies
View Related
Apr 10, 2009
I tried to run system-config-kickstart when after full installed CentOS 5.3,it report error as following,does anyone face the same problem?
[root@localhost ~]# system-config-kickstart
Loaded plugins: fastestmirror, kernel-module, priorities, protectbase,
: versionlock
[code]....
View 2 Replies
View Related
Nov 9, 2009
I'm installing CentOS for the first time to run mythtv on (I previously used Fedora, but the new version cycle was too quick). As part of the instructions I'm using, I am told to run system-config-boot (to ensure that centosplus kernel is loaded on boot). The problem is, I cant find this option in my installation of CentOS. Another option I have is to manually edit the grub.conf file, but I'm not sure exactly how I should edit it.
View 2 Replies
View Related
Jun 29, 2010
I am very interested in using CentOS as a server for diskless PXE booting and was wondering if this was a possibility. I have a working DHCP/TFTP/HTTP system set up and going and I can get my client machine to boot a linux image without any problems. Ideally I would like the diskless machines to be able to immediately load an image through PXE and store their own filesystems on the server through the use of NFS.I heard about system-config-netboot and got very excited because it sounded like something that would help me set up a diskless system. However, after doing some research I have heard from many that it is generally buggy and unlikely to work. When I tried using it I got the error: "The diskless directory must be NFS exported and contain a boot sub-directory"Even though my diskless directory WAS nfs exported and most definitely contained a boot sub-directory. Does anyone have any advice on using this tool, or using CentOS as a server for diskless clients?
View 2 Replies
View Related
Feb 24, 2010
system-config-samba doean't work from terminal neither it is shown in graphical mode, i cannot see system > administration > servers. Server is missing.
View 1 Replies
View Related
Jul 14, 2009
I have a Samba File Server that can authenticate users in my Windows AD to log into the server. Anyways, I have a good amount of Windows Admins on staff but our org wants to cut budget so our first "slash" as it were is cutting down the actual Windows based File Servers.So my question is, now that I have this test server up and authenticating for logins using Windbind....is there a way I can get system-config-samba to "see" winbind users and groups so that file servers can still be "point and click" for my Windows Admins?
View 3 Replies
View Related
Oct 4, 2010
I've tried to read many of the topics in this forum first and tried to find a solution to my problem, but can't find one.I'm testing CentOS 5.5, it's the first time I'm using a CentOS Linux release.I'm trying to configure the proxy "client side " on it and cannot find how to do it.On other Linux release I've used the ENV variable like "http_proxy" or "HTTP_PROXY" etc etc.This time, I don't know why but it doesn't work.I've put the name and @ip of the proxy in /etc/hosts and tried different version upper/lowercase of "http_proxy" "HTTP_proxy" "ftp_pr.." but it doesn't work.If I configure manually Firefox and puting the name or @ip of the proxy we have on our network, it works.But if I try to use ENV variable it doesn't work...
View 1 Replies
View Related
Nov 7, 2010
Its 2 weeks i'm trying to configure freeradius2 on centos5 64bit after installed it from yum.all seems working, but i cant authenticate unix users.after digging in many sites its simply cant find user name and password ( ++[unix] returns notfound )Also how can i paste here all the radiusd -X log lines? i can't find any
radius.log file.
View 10 Replies
View Related
Oct 12, 2009
Several of the the items in the menu System --> Administration do not function. They say they are starting but fail to come up then disappear of the task bar. Is there anywhere i can look to see why it has failed to come up?
All item in the menu except; Display, Hardware, Server Settings, System Monitor
View 2 Replies
View Related
Sep 7, 2009
I was tryin to deploy svn on centos 5 with respect to [URL] I am stuck understandin the location svnpath parameter on svn config
[Code]...
View 1 Replies
View Related
Mar 28, 2009
I want to reinstall "system-config-network" in Fedora10. I have now system-config-network 1.5.95 and I want to have system-config-network 1.4.3 (it is from fedora8)
View 3 Replies
View Related
May 28, 2009
I've been running F10 since it first came out, and I was happy to see it was the first Fedora release that automatically recognized my Atheros wireless card. I have to run system-config-network and press the "activate" button when I start the machine, but that's ok and no big deal. But today, for whatever reason,in system-config-network, the "activate" and "deactivate" buttons are grayed out and I cannot start the device so I have no network access. When I boot the machine into Windows, it works fine.
View 2 Replies
View Related
May 18, 2010
I had a working client installation with CentOS 5.4, using kerberos and PAM to authenticate. After an upgrade to 5.5, logins for users are no longer possible. Instead I get this:
/var/log/messages: gdm: Couldn't set acct. mgmt for <user> /var/log/secure: gdm: pam_krb5: authentication fails for '<user>': (<user@domain>): Authentication failure (Cannot read password) gdm: pam_krb5: account checks fail for '<user>': unknown reason -1765328254 (Cannot read password) gdm: pam:krb5: User not known to the underlying authentication module (Client not found in Kerberos database) "kinit <user>" still works as expected, and <user> has no problems logging in from other types of clients. Something kerberos-related apparently broke in CentOS 5.5,
View 2 Replies
View Related
Nov 2, 2009
Since latest large update to CentOS 5.3, which also upgraded to 5.4, I have problem with dnsmasq. CentOS is real server on real hardware (not virtual). I use dnsmasq as dhcp server as usual. On hardware startup or reboot, these lines are included in /var/log/messages
Nov 2 19:06:16 server avahi-daemon[2965]: New relevant interface eth0.IPv4 for mDNS.
Nov 2 19:06:16 server avahi-daemon[2965]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.1.
[Code]....
View 14 Replies
View Related
Oct 14, 2010
I am running the following on CentOS 5.5 (Final)
dovecot 1.0.7
saslauthd 2.1.22
When I send an email via TLS I see the following log entries.
Code:
Oct 14 11:53:06 ns2 postfix/smtpd[11372]: connect from unknown[172.16.1.159]
Oct 14 11:53:06 ns2 postfix/smtpd[11372]: setting up TLS connection from unknown[172.16.1.159]
[Code]....
What I'm really curious about is there is an intial TLS connection with a 256 bit cipher, but then.. The last entry states "sasl_method=PLAIN" - so surely this is not encrypted? Or am I misunderstanding how it works?
View 2 Replies
View Related
Jun 8, 2009
I'm using Fedora 9 and I recently transferred my hard drive to a new laptop. Everything went smoothly except the wireless, which promptly broke. I played around with the network service and the NetworkManager service and chkconfig stuff and system-config-network, until I finally got it to work. Now I have wireless, but every time I shut down, I get some error-like messages:
"ipw2200: Failed to send SYSTEM_CONFIG: Already sending a command." repeating every second for about 3 or 4 seconds before it finally does shut down.
These also appear in dmesg, usually about 20 in a row, thus my concern. My wireless device's interface is eth3. How to get rid of this message while still keeping wireless connectivity.
View 1 Replies
View Related
Jul 14, 2010
I was trying to set my wireless to start up when the computer is booted like the regular ethernet eth0 but I can't figure out how to set the WPA pass phrase with system-config-network
View 2 Replies
View Related
May 26, 2010
I did a yum update this morning that included a dnsmasq update. Subsequently, for an unrelated reason, I restarted dnsmasq, but it failed because /etc/dnsmasq.d didn't exist. It looks like my /etc/dnsmasq.conf file now includes "conf-dir=/etc/dnsmasq.d" at the end. Since dnsmasq was starting and I didn't remove dnsmasq.d, I assume this line was added by the update. Commenting the line resolves the issue.
An alternative hypothesis, given that I don't really know what the state of /etc/dnsmasq.conf and /etc/dnsmasq.d/ was before the update, might be that the directory did exist, but was removed by the update. I find this the least likely of my 2 stated hypotheses. (There are other hypotheses, but I think they are even less likely). Am I correct is concluding the conf-dir line was added by the update? If so, shouldn't the updated RPM create the directory during install?
View 6 Replies
View Related
Dec 31, 2010
I have a SSH box which is command line only and no X, this will be used remote and i'm trying to get the wireless network configured to start at boot. I'm using wpa_supplicant as the access point is secure with WPA2 At present if I send the following commands the machine will connect to the wifi and be reachable via ssh
ifup wlan0
/usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -D wext -dd -i wlan0 -B
dhclient wlan0
This does not start at boot but requires manual input of the above commands. I've just come to a complete blank on geting this to start at boot time. Also I would like to set a fixed IP for this box.
View 7 Replies
View Related
Sep 1, 2010
This may fall under the "ain't broke don't fix it" category but it's driving me nuts. I've got the Broadcom 4322 wireless adapter in my laptop and it works fine with broadcom-wl driver and kmod. However there is no ifcfg-eth1 file and the card does not show up in system-config-network.
View 2 Replies
View Related
Mar 18, 2009
I've been racking my brains over the past few days trying to figure out why my NIC card (network interface card) won't show up in the ifcfg-eth0 file.When I configure a new server (like this one) I always go to:/etc/sysconfig/network-scripts/ifcfg-eth0 and from there I usally see the name of my NIC's manufacturer's name and the hardware MAC address.Then it's only a simple process of entering the server's IP address, netmask and gateway and I'm up and running in no time...But not in this case! the ifcfg-eth0 file is completely blank! There's not ONE single line of config info in it... (?)The server runs an Intel core 2 duo (dual-core) CPU with 1 gig of RAM.
I've even re-formatted the drive and re-installed Centos 5.1 on the darn thing 3 times and it simply won't work.The server cannot resolve when I do a wgetIt also gives me a 'resolution problem in the named configuration'.What I don't understand is that the 2 small LEDs on the Cat 5 cable lights up and flash at what appear to be regular intervals here.
View 6 Replies
View Related
Jul 7, 2010
i have encounter strange situation i have set all my network configuration via /etc/sysconfig/network-scripts/ifcfg-eth0 ,eth0.2 ,eth1 etc ....i have used only once Gnome network manage settings to add routing since then all my network config change although all files mention above showing the same config i have set initially and same for Gnome network Manager.
View 3 Replies
View Related
Aug 6, 2010
I am a long time Unix system admin and this one has got me stumped.When I try to run the system-config-network (or any of the system-config-xxx programs) from the links on the GNOME interface, I get a message pop-up that says, "Unknown error" and no additional information. I have also opened a terminal and run it from the command line (/usr/bin/system-network-config) and I get the same "Unknown error" pop-up. I was not the one who originally configured this server, so I am not sure of the history or how it might have been broken. I can't seem to find any debugging information or even any command line parameters that might give me a clue what the complaint is. There is no error number or any other helpful hint as to the cause of the problem.
I have been manually editing the config files so the server is up and running but it is tedious to manage the server without the GUI.Has anyone seen this before? I assume it is a configuration issue, but I am not sure where to look.uname -aLinux xxxxserver 2.6.18-164.15.1.el5 #1 SMP Wed Mar 17 11:30:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux/etc/redhat-releaseCentOS release 5.4 (Final)
View 3 Replies
View Related
Sep 25, 2009
i want to authenticate user (client) via switch to the radius server(CentOS)Can anyone tell me the authentication/authorization configuration that should be made in the switch (huawei) and the radius server(centos).Esp. the main files under /etc/raddb/ in the Server& the configuration to be made under the radius server template "test"( as of my case)...
View 1 Replies
View Related
Nov 29, 2009
I am booting centos 5.3 on x86-64 machine. The system hands at line "Starting xend:". Is there any way to skip starting xend service during boot or disable it during boot so the system finally reboots.
View 3 Replies
View Related
Jun 2, 2009
I recently built my second general-purpose server, and recently installed fedora core 10 on it. The first thing I attempted to set up after installation was the network - and that's where it's gone wrong When editing a network device using the graphical system-config-network utility, I find that the subnet mask is being automatically changed to match the default gateway address every time I attempt to modify any of its settings (or sometimes even when I cancel the changes). This also means that I cannot set the subnet mask, as it simply won't accept my setting for it. I seem to be able to get around this glitch by setting the subnet mask using the shell version of the same utility, but that doesn't solve my network issue.
Even when I use the shell utility to fix the subnet mask, I'm unable to ping other computers or routers on the network even when ifconfig indicates that the desired ip address has been taken, and other computers on the network are also unable to see the server. I'm using a wired connection and a static IP address on a network with no DHCP.
View 14 Replies
View Related
