when I try to su, with the right password I know it is because I have reset it with a sudo, it says su: incorrect password. Looking at /var/log/messages I see su: Unable to open admin password file: Permission denied. This must mean that the file has incorrect permissions and or owner/group. I am wondering if anyone knew where the file was located and the correct permissions/owner/group.
View 3 Replies
I am having problems gaining access to the BackupPC admin web page. The error:
Quote:
[Tue Feb 22 16:43:59 2011] [error] [client 192.168.0.2] (13)Permission denied: Could not open password file: /etc/BackupPC/htpasswd [Tue Feb 22 16:43:59 2011] [error] [client 82.30.227.113] access to /backuppc failed, reason: verification of user id 'myhtaccessuser' not configured
Why is this occuring, is there anyway of getting around this? I just cant remember originally on my old system how I set this up.
Unable to open pty: Permission denied while trying to login to vps node.
View 2 Replies View RelatedI was able to get the a2ensite command to enable a virtual site because it says "Site xxxxx.com already enabled" when I run the command. My problem now is that even though a site is enabled it says this: Code: /etc/init.d/apache2 restart * Restarting web server apache2
[Tue Apr 20 01:28:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
[Tue Apr 20 01:28:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
[Tue Apr 20 01:28:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
[Tue Apr 20 01:28:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs Should I do a chown or chmod to a file?
I'm having a permissions problem with Ubuntu and apache. There are two users, I'll just call them A and B. All of the files belong to A and group root. I'm logged in as B and I have admin privileges. My website is working just fine but when I create a directory in the web root, change the owner to A on the directory and all files I still get a Permission Denied error when I try to access it from the web. I've also set permissions to rxwr-xr-x on the directory and all the files. So I don't understand what's going on. Why am I still getting a permission denied error?
View 1 Replies View RelatedRunning newaliasespostalias: fatal: open database /etc/aliases.db: Permission deniedin my /etc I do not have a aliases.db only an aliases.I cp aliases aliases.db but when I try and install post fix again it gives me the same error and aliases.db goes away.
View 9 Replies View RelatedI have a cgi script that tries to get the IP address of a domain. the Domain is defined in Bind, yet it can not resolve it. I put the domain in the host file and it then gives a Error: unable to create socket - Permission denied
I figure I have to do some code changes to the script but here I would like an explaination as to the error I am getting.
Im trying to run a program but my system won't let me.i used to be able to run executable files without a problem but i can't anymore when i double click the file i get "there is no application installed for executable files" i am unable to check "allow executing file as program" in file properties there is a script file which runs the program but all i get from the terminal is "permission denied"
View 14 Replies View RelatedI tried posting this before and I'm not sure what happened but I don't think it worked, so if it did please forgive the double post.am very very new to centOS and linux in general. I just want to setup a test web server that more closely mirrors our actual web server that is hosted by rackspace. I've installed centOS and tried to setup Apache, PHP and MySQL from a guide on the web using Yum. When I go to localhost in the web browser I'm able to see the default apache page. However when I create a php page it's just blank.When I look at the apache error logs I get this: PHP Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
I've been searching alot on the internet and I know the issue is permission related, but I don't know how to fix it. I've seen some forum posts that say you need to use the chmod 775 command on the /var/www/html folder.Currently when I do ls -l /var/www/html it returns
-rw------- 1 root root 19 May 5 13:16 index.php
-rw------- 1 root root 19 May 5 13:15 index.php~
I'm sure that this isn't correct but like I said I don't know much about how to set permissions or who the owner needs to be. I've done alot of searching and seen similar posts, but no one seems to explain it clearly.
I have created a basic ssh server and i haven't done any configuring to it other than to port forward port 22. i am trying to connect to it from a client computer (they are on the same router). i enter the command "SSH <IP of the server>", and it asks me for the password. i have tried "SSH <my user name>@<IP of client>", but it says permission denied.
View 8 Replies View RelatedI want to access my desktop from my laptop over the internet, after a while I found this [URL] so I followed the instructions "Access your PC over the internet" and "Logging in from another Ubuntu PC". Everything goes well until I try to run the shell script and get this: laptopuser@123.456.7.890's password:
I tried my luck with the passphrase associated with the rsa key, with the password of the laptopuser@laptop and with the password of the desktopuser@desktop but I keep getting Permission Denied (publickey, password).
I am trying to set up remote login via SSH from my Mac to an Ubuntu desktop. Here is the error i am getting:
Code: Permission denied (publickey,password). I'll give background:
- Both computers are on the same network
- I'm not using the default port 22
- I have successfully logged in using password authentication, so it isn't a firewall/iptables issue i don't think. I've already worked through those issues!
- I haven't set up any tcp wrappers on the server yet, so nothing is being denied
- I believe the server sshd_config file is setup correctly. I can post it if needed.
Here's debugging info:
bash-3.2$ ssh localuser@xxx.xxx.x.x -v
OpenSSH_5.2p1, OpenSSL 0.9.7l 28 Sep 2006
debug1: Reading configuration data /etc/ssh_config
debug1: Connecting to xxx.xxx.x.x [xxx.xxx.x.x] port xx.
debug1: fd 3 clearing O_NONBLOCK
debug1: Connection established.
debug1: identity file /Users/localuser/.ssh/id_rsa type 1
[Code]....
I'm getting error from KVM when i try to create new machine. I have install group Virtualization. From gui virtual-manager (after being asked for root passwd) tried to create new machine. When pressed on 'Finish' got this 'Permission denied' error:
Code:
Unable to complete install '<class 'libvirt.libvirtError'> internal error Process exited while reading console log output: char device redirected to /dev/pts/3
qemu: could not open disk image /sonik_data/software_archive/CentOS-5.5-x86_64-netinstall.iso: Permission denied
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/create.py", line 1567, in do_install
dom = guest.start_install(False, meter = meter)
File "/usr/lib/python2.7/site-packages/virtinst/Guest.py", line 1023, in start_install
return self._do_install(consolecb, meter, removeOld, wait)
File "/usr/lib/python2.7/site-packages/virtinst/Guest.py", line 1088, in _do_install "install")
File "/usr/lib/python2.7/site-packages/virtinst/Guest.py", line 1059, in _create_guest
dom = self.conn.createLinux(start_xml, 0)
File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1277, in createLinux
if ret is None:raise libvirtError('virDomainCreateLinux() failed', conn=self)
libvirtError: internal error Process exited while reading console log output: char device redirected to /dev/pts/3
qemu: could not open disk image /sonik_data/software_archive/CentOS-5.5-x86_64-netinstall.iso: Permission denied
It's running as a root, what permissions we are talking about here? I'm running F14, kernel 2.6.35.10-72.fc14.x86_64, libvirtd 0.8.3
When, from the live cd I try to execute
Code:
e2fsck -y /dev/sda1
All i get is:[code].......
I can't open etc/network/interfaces file comes some permission denied. What can I do?
View 2 Replies View RelatedAfter install TexLive, sudo stop working. If I run sudo:
Quote:
sudo: can't open /etc/sudoers: Permission denied
sudo: no valid sudoers sources found, quitting
Edit: Hal and dbus is not working either, if i startx I don't have network manager or automatic mount of pen and disks.
I installed wvdial on my Satellite Toshiba laptop. All works well but I have to use the <wvdial> command as root. If I try to use it as a user i get an error message Cannot open /dev/ttyACM0: Permission denied So Im just wondering; is it ok to use wvdial as root?
View 2 Replies View RelatedI cannot get access to my external hard disk. It says as in the "SUBJECT" above. What should I do? I installed Debian XFCE testing.
View 5 Replies View RelatedHello,
this error spams about 100 times, then the scanner does indeed work. So I'm not completely broken, but the error messages are of concern, and it slows down the process of scanning for the time it takes to do the messages.
Error in console:
libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied. libusb requires write access to USB device nodes.
my sript runs:
scanimage
--device $MODEL
--resolution=$RESOLUTION
-x 5104 -y 6840
my groups:
uid=1000(fogie) gid=100(users) groups=100(users),7(lp),11(floppy),12(mail),15(man),17(audio),18(video),19(cdrom),20(games),21(sloca te),83(plugdev),84(power),86(netdev),93(scanner)
Even a simple:
scanimage -Lv
in console gives this on a separate --current pc as well.
I just isntalled LAMP using tasksel and have a problem. Whenever I try to access a page (aside from phpmyadmin, that works well), I get this error... Code: Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0 Fatal error: Unknown: Failed opening required '/var/www/index.php' (include_path='.:/usr/share/php:/usr/share/pear') in Unknown on line 0
I have restarted the computer, restarted apache, etc and still nothing. When I first installed, phpmyadmin was inaccessible, so I ran some command in terminal which apparently created a symlink between phpmyadmin in the user/share dir to the /var/www dir, and curious if this is the problem. I have no clue how to remove this symlink if this is the case, and have phpmyadmin working now due to install using sudo apt-get install phpmyadmin.
I'm trying to run a backup using CPIO to an LTO2 tape in an HP Ultrium 460 drive using the following:find / -path /proc -prune -o -print | cpio -o -H crc --block-size=128 > /dev/st0Each time I get the error:-bash: /dev/st0: Permission deniedThis is regardless of whether I sudo the two sides of the command or not. I have used dd if=/dev/st0 of=/tmp/test.file ibs=128k count=1 to verify the blocksize (and since I was a little confused about block-size in cpio I also tried --block-size=256)
View 5 Replies View RelatedI'm trying to setup a network boot server and I'm having an issue with tftp. In the /etc/xinetd.d/tftp file, I added the "-v" (verbose) option to the server arg line so that i could figure out what was happening. When i looked at the /var/log/messages log file, it let me know that permission was denied to /tftpboot/nbi_img.
So, in short, my problem is that tftp isn't working because it doesn't have permission to /tftpboot/nbi_img. I can't figure out why. I stumbled upon a site where the user figured out a temporary fix to this issue and what he did was disabled the xinetd service and typed the following command:/usr/sbin/in.tftpd -l -v -v -s /tftpboot/nbi_imgWhen I do this as well, it works! but only until I restart and then I have to do that again. Is there a way to be able to fix that for good?
i have a big question about nfsv4, 2 mahine , 1 client 1 serverclient mount -t nfs4 nfs:/ /mnt/nfscd /mnt/nfs/1touch: cannot touch `123': Permission deniedmount -lnfs:/ on /mnt/nfs type nfs4rw,addr=192.168.1.5)this is my configclient & servervi /etc/hosts192.168.1.5 nfs nfs.test.com192.168.1.6 node1 node1.test.com
View 6 Replies View RelatedI installed samba em my opensusse and i have fallows error: Unable to setup corepath for smbd: Permission denied
View 1 Replies View RelatedI'm trying to install Ubuntu on an Aspire laptop with Windows XP. I downloaded 10.04 and burned an ISO image. I boot Windows and open the ISO disk. I open the first choice which is to try Ubuntu prior to a complete installation. The installation starts and proceeds for a few minutes. Then it stops and displays a message 'Permission Denied' and a suggestion to check the installation log. The last few lines are:
[code]...
I followed instructions from here: [url]
Everything seems to be ok but if I try to login it says following:
I have tried with numerous clients and accounts but still nothing, I cant get past the login. What may be wrong?
Here is the log from account creation, could the last line be causing the problems?
I had some hassle with the last two iptables lines but once I took away RH-Firewall-1 from those lines iptables gave no error anymore.
I changed this: -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT
To this: -A INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT
I have my DNS configure in 2 zones. 1 internal, and the other external. DNS is chrooted under /var/named/chroot amd has been operating without any problems for well over 2 years now. I have recently run cross the problem shown in the subject line. When I try to freeze the internal dehnert.com zone with the following command...rndc freeze dehnert.com IN internal
I get the error...
I have been running the command as root, and with iptables turned off, so there is no firewall to restricting access. (the system sits behind a firewall) I have been searching the forums all over, but I havent run across what might be causing me to have root denied access. If anyone has seen any problem like this, please point me in the right direction so I can iron this out.
My named.conf is as follows...
I am unable to start my xserver, using the startx command that I have been using for the past 5 years. It goes to the blue loading screen with the x for a cursor, hangs there for about a min or so then goes back to the command screen. I get an error:
Code:
giving up. xinit: Permission denied (errno 13): unable to connect to xserver waiting for xserver to shut down xinit: Server error.I have tried logging on as root and trying startx again. Same error.
Sudo echo fuse >> /etc/modules
Any idea why that'd yield a "bash: /etc/modules: Permission denied" error? Here's what "stat /etc/modules" says code...
using a terminal
logged into userMan remotely
[code]
scp /file.txt xxx.xxx.xx:/home/userMan/
[code]
Is the syntax above correct?
I'm trying to copy /file.txt from local machine, to server with userMan
error: /file.txt doesn't exist
