CentOS 5 :: Rndc - 'freeze' Failed - Permission Denied
Aug 7, 2011
I have my DNS configure in 2 zones. 1 internal, and the other external. DNS is chrooted under /var/named/chroot amd has been operating without any problems for well over 2 years now. I have recently run cross the problem shown in the subject line. When I try to freeze the internal dehnert.com zone with the following command...rndc freeze dehnert.com IN internal
I get the error...
I have been running the command as root, and with iptables turned off, so there is no firewall to restricting access. (the system sits behind a firewall) I have been searching the forums all over, but I havent run across what might be causing me to have root denied access. If anyone has seen any problem like this, please point me in the right direction so I can iron this out.
My named.conf is as follows...
View 1 Replies
ADVERTISEMENT
May 5, 2010
I tried posting this before and I'm not sure what happened but I don't think it worked, so if it did please forgive the double post.am very very new to centOS and linux in general. I just want to setup a test web server that more closely mirrors our actual web server that is hosted by rackspace. I've installed centOS and tried to setup Apache, PHP and MySQL from a guide on the web using Yum. When I go to localhost in the web browser I'm able to see the default apache page. However when I create a php page it's just blank.When I look at the apache error logs I get this: PHP Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
I've been searching alot on the internet and I know the issue is permission related, but I don't know how to fix it. I've seen some forum posts that say you need to use the chmod 775 command on the /var/www/html folder.Currently when I do ls -l /var/www/html it returns
-rw------- 1 root root 19 May 5 13:16 index.php
-rw------- 1 root root 19 May 5 13:15 index.php~
I'm sure that this isn't correct but like I said I don't know much about how to set permissions or who the owner needs to be. I've done alot of searching and seen similar posts, but no one seems to explain it clearly.
View 2 Replies
View Related
Nov 22, 2010
I have a Ubuntu box and just got a new hard drive. Rather than copy everything over from my old working Ubuntu install, I wanted to install Ubuntu from scratch and then rebuild the file contents.I have a large collection of music that I use on my mac (another computer) and like to keep sync'ed to the Ubuntu box. The following script used to work flawlessly:
Code:
rsync -avz --delete --exclude-from './music_exclude_list' '/Users/ryan/Music/iTunes/iTunes Music/' 'ryan@192.168.1.200:/home/share/music'
[code]....
View 1 Replies
View Related
Apr 29, 2011
I cant install Ubuntu 11.04 , on my Emachines laptop. On my Windows 7, When I boot up my USB/CD/card, it says: Ubuntu failed to mount dev/loop0 , something like that everytime, no matter what I do. And when I try wubi it says permission denied, .log filed saved. I've also mounted it using clonedrive, nothing works.
View 1 Replies
View Related
Aug 5, 2011
Quote:
Error mounting: mount exited with exit code 1: helper failed with:
Error opening '/dev/sdc1': Permission denied
Failed to mount '/dev/sdc1': Permission denied
[code]....
How do I get past this error?
View 1 Replies
View Related
Apr 27, 2011
I'm sooo exausted after two days of fooling with this. The problem: Apr 27 17:29:21 mxkasib dovecot: lda: Error: userdb lookup: connect(/var/run/dovecot/auth-userdb) failed: Permission denied (euid=8(mail) egid=12(mail) missing +w perm: /var/run/dovecot/auth-userdb, euid is not dir owner)
Obviously, dovecot-lda, instanced by postfix, couldn't access the auth-userdb file because of permission. There are plenty of topics over the internet, the problem is really simple. Except for I've got all the permissions needed, or it seems to me so and I'm missing something. Here is some additional information:
[Code]...
I've given all the permissions I could imagine. It's even devil 666, and it still complains.
View 2 Replies
View Related
Jul 11, 2011
I'm trying to start a program, but I keep getting the error:
"There was an error launching the application." Details: Failed to execute child process "/home/jjo/Desktop/0ad/build/resources" (Permission denied)
I've tried changing the permissions of the file, with no luck.
View 9 Replies
View Related
May 19, 2010
I cannot get access to my external hard disk. It says as in the "SUBJECT" above. What should I do? I installed Debian XFCE testing.
View 5 Replies
View Related
May 15, 2010
I tried a 9.10 -> 10.04 upgrade that went fail. I can now get it to the login screen where it gives a hard freeze. Same with recovery. I can get to a command line, but not with networking so
So I finally said screw it, I'm going to doa fresh install. I downloaded and burned 10.04 at work. Not, it is giving me an installer error when I boot from it, but then it will load the desktop from the LiveCD.
All I really want to do is grab some data that I didn't get when I backed up by home directory, then I can go back and do a fresh install. I can even download a new 10.04 CD if I need to because the installation files are screwed up or something.
The problem is that some of the files have permissions on that that show as an 'X' on the icon and it won't let me copy them to my USB backup drive.
How can I copy the files marked with an 'X' that have this permission issue?
View 3 Replies
View Related
Jul 19, 2011
I'm trying to add a key public key for my dev box which is a vm running ubuntu natty, and I am unable to connect via ssh. I've tried rsa and dsa, as well as these commands:
exec ssh-agent bash
ssh-add ~/.ssh/id_rsa
ssh-add ~/.ssh/id_dsa
[Code]...
I think I've found the error by running sudo /usr/sbin/sshd -Dd, but I'm not sure how to fix it:
ebug1: sshd version OpenSSH_5.8p1 Debian-1ubuntu3
debug1: read PEM private key done: type RSA
debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048
[Code]...
View 3 Replies
View Related
Dec 12, 2010
I had debian lenny running smoothly for a while, then I think the power went out and the computer didn't shutdown smoothly. The next time I started it up I ran into this error: Checking root file system.../etc/rcS.d/S10checkroot.sh: line 274: /sbin/logsave: Permission deniedfailed (code 126)This happens in single user mode as well. I've tried fscking all my partitions but it doesn't help. I've booted in bypassing the normal init and changed the permissions of /sbin/logsave to 777 and during boot I get a message of: The file system check corrected errors on the root partition but requested that the system be restarted. failed!Then the system just reboots automatically without letting me to anything.
View 7 Replies
View Related
Mar 10, 2010
I just isntalled LAMP using tasksel and have a problem. Whenever I try to access a page (aside from phpmyadmin, that works well), I get this error... Code: Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0 Fatal error: Unknown: Failed opening required '/var/www/index.php' (include_path='.:/usr/share/php:/usr/share/pear') in Unknown on line 0
I have restarted the computer, restarted apache, etc and still nothing. When I first installed, phpmyadmin was inaccessible, so I ran some command in terminal which apparently created a symlink between phpmyadmin in the user/share dir to the /var/www dir, and curious if this is the problem. I have no clue how to remove this symlink if this is the case, and have phpmyadmin working now due to install using sudo apt-get install phpmyadmin.
View 1 Replies
View Related
Apr 27, 2009
Im having some problem with my DNS. We are using a Linux web server as one of our web server which runs some live websites.When I trying to get the status of the DNS (NAMED) it comes the following error :
The same error appears when Im trying to apply any changes on zone level for a selected doamin in WEBMIN. (Basically can't apply changes)
WEBMIN > Servers > BIND DNS servers > click a selected-domain.co.uk > Apply changes
NDC command failed : rndc: connect failed: 127.0.0.1#953: connection refused
But the server seems to be running without effecting any probelms to the sites or users. I have been searching weeks for this problem & couldn't find a solution. And also Please note that Im bit new to Linux.
Server details :
Red Hat 4.1.1-1
View 15 Replies
View Related
Nov 30, 2010
We have ubuntu server and bind9 installed and setup.When I issue rndc reload or /etc/init.d/bind9 reload I got this:rndc: connection to remote host closedThis may indicate that* the remote server is using an older version of the command protocol,* this host is not authorized to connect,* the clocks are not syncronized, or* the key is invalid.If I issue named-checkconf /etc/bind/named.conf I got this:/etc/bind/named.conf.local:165: unknown key 'rndc-key'I got the key files in the right location but I'm not sure if we even need to use them.
View 2 Replies
View Related
Jan 2, 2009
I'm trying to run a backup using CPIO to an LTO2 tape in an HP Ultrium 460 drive using the following:find / -path /proc -prune -o -print | cpio -o -H crc --block-size=128 > /dev/st0Each time I get the error:-bash: /dev/st0: Permission deniedThis is regardless of whether I sudo the two sides of the command or not. I have used dd if=/dev/st0 of=/tmp/test.file ibs=128k count=1 to verify the blocksize (and since I was a little confused about block-size in cpio I also tried --block-size=256)
View 5 Replies
View Related
Feb 3, 2010
I'm trying to setup a network boot server and I'm having an issue with tftp. In the /etc/xinetd.d/tftp file, I added the "-v" (verbose) option to the server arg line so that i could figure out what was happening. When i looked at the /var/log/messages log file, it let me know that permission was denied to /tftpboot/nbi_img.
So, in short, my problem is that tftp isn't working because it doesn't have permission to /tftpboot/nbi_img. I can't figure out why. I stumbled upon a site where the user figured out a temporary fix to this issue and what he did was disabled the xinetd service and typed the following command:/usr/sbin/in.tftpd -l -v -v -s /tftpboot/nbi_imgWhen I do this as well, it works! but only until I restart and then I have to do that again. Is there a way to be able to fix that for good?
View 3 Replies
View Related
Apr 21, 2011
i have a big question about nfsv4, 2 mahine , 1 client 1 serverclient mount -t nfs4 nfs:/ /mnt/nfscd /mnt/nfs/1touch: cannot touch `123': Permission deniedmount -lnfs:/ on /mnt/nfs type nfs4rw,addr=192.168.1.5)this is my configclient & servervi /etc/hosts192.168.1.5 nfs nfs.test.com192.168.1.6 node1 node1.test.com
View 6 Replies
View Related
Jun 2, 2009
I followed instructions from here: [url]
Everything seems to be ok but if I try to login it says following:
I have tried with numerous clients and accounts but still nothing, I cant get past the login. What may be wrong?
Here is the log from account creation, could the last line be causing the problems?
I had some hassle with the last two iptables lines but once I took away RH-Firewall-1 from those lines iptables gave no error anymore.
I changed this: -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT
To this: -A INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT
View 4 Replies
View Related
Jun 13, 2009
I am trying to wade through the semanage jungle to get permissions for a tftp client. I followed the HowTos [URL] but I get the following at the client:
tftp> status
Connected to 192.168.1.101.
Mode: netascii Verbose: off Tracing: off
Rexmt-interval: 5 seconds, Max-timeout: 25 seconds
tftp> get hello.o4
tftp: hello.o4: Permission denied
I finally figured out that the firewall directives shown at the end of the HowTo refer to semanage although the options are stated incorrectly according to the man page for semanage. I did insure that the file hello.o4 in /tftpboot has read permission for everybody.
View 1 Replies
View Related
Aug 6, 2009
I'm using crontab for user ABC in a month and have no problem.. But today i want to add new schedule user ABC with crontab.. i found this error
/tmp/crontab.XXXXDYxb6a: Permission denied
so i check with crontab -l command, it can show my schedule.. If I use root, crontab -e and crontab -l work properly..
Note: ls -al /tmp
drwxr-xrwx 8 root root 4096 Aug 6 09:30 .
drwxr-xr-x 24 root root 4096 Jul 19 17:10 ..
drwxrwxrwt 2 root root 4096 Jul 19 17:20 .font-unix
View 1 Replies
View Related
Aug 11, 2009
I want to install Codendi softwr to my Centos 5.3.But can not execute the installation script gives an error permission denied./etc/fstab file does not contain a path that holds my CDROM drive.
View 2 Replies
View Related
Jun 10, 2010
I have 3rd party software that I need to install. It is called VNMRJ. It is packed as one .tar. I extracted the .tar to the desktop (under root) and want to start the installation. However, during the installation process, all .tar files included the the package (sub directories) can't be extracted by the installation routine. For every .tar I get the error
tar: /root/Desktop/vnmrj21b_inova_01106/code/common/com.tar: Cannot open: Permission denied
Installation of VNMR failed
tar: Error is not recoverable: exiting now
DONE: 112 KB
View 5 Replies
View Related
May 21, 2009
I have a cgi script that tries to get the IP address of a domain. the Domain is defined in Bind, yet it can not resolve it. I put the domain in the host file and it then gives a Error: unable to create socket - Permission denied
I figure I have to do some code changes to the script but here I would like an explaination as to the error I am getting.
View 1 Replies
View Related
Nov 5, 2009
I have tried to mount Sda on my laptop HP dv6 and I have got this problem [root@cpe-74-71-125-175 ~]# /dev/sda1 /mymount/win ntfs-3g rw,umask=0000,defaults 0 0 bash: /dev/sda1: Permission denied
View 3 Replies
View Related
Feb 25, 2011
when I try to su, with the right password I know it is because I have reset it with a sudo, it says su: incorrect password. Looking at /var/log/messages I see su: Unable to open admin password file: Permission denied. This must mean that the file has incorrect permissions and or owner/group. I am wondering if anyone knew where the file was located and the correct permissions/owner/group.
View 3 Replies
View Related
Jul 6, 2010
On a fresh installed Lucide machine, I cannot open external hyper links (url) from within evince. I get the following error message:
Unable to open external link
Failed to execute child process "nautilus" (Permission denied)
View 1 Replies
View Related
Jun 30, 2011
I'm trying to connect to my NFS server(192.168.2.183, running on Centos 5) and get these errors
On client (OSX 10.6):
$ sudo mount -t nfs 192.168.2.183:/testmount /Users/Shared
Cannot MNT RPC: RPC: Remote system error - Connection refused
Cannot MNT RPC: RPC: Remote system error - Connection refused
[code]...
both of the server and client are on the same network (192.168.2.0)
View 1 Replies
View Related
Jan 29, 2010
On our app server the logs from the Sybase Mobilink service get logged to /var/log because of that I did a chmod a+rx /var/log and all is well until.... the next day QA logs in goes to check the logs and gets:
Quote:
qa@dwdb [~]$ ls /var/log
ls: /var/log: Permission denied
qa@dwdb [~]$
View 18 Replies
View Related
Jul 26, 2009
Its been a while (maybe too long) since I last used yum to check for updates / install anything on my server, but when I tried the other day I got the following response:
# yum list updates
Loading "installonlyn" plugin
Setting up repositories
Error: Cannot find a valid baseurl for repo: updates[code]......
Trying other mirror.Error: Cannot open/read repomd.xml file for repository: updates
A few weeks ago there were some network changes, but nothing else should have changed OS side.I have checked /etc/resolv.conf and that looks ok - ping and wget have no problem resolving hostnames.I tried setting enabled=0 in yhe .repos files - this allowed me to do a 'yum list', but 'yum list updates' returned an empty list - I am definitely not 100% up to date!
P.S. Attachment not there at the moment - getting the following error when I try to upload the zip file...Errors Returned While Uploading
Failed to open directory with write permission: /var/wwwthtml/oldwebcopy.centos.org/uploads/newbb
View 7 Replies
View Related
Mar 1, 2011
I have a user (let's call him John) who is not able to list contents of several 777 directories even though it appears he has permission to.
Case in point, as root:
Code:
Code:
If I use ls -a or strictly ls as john, I can list the contents of the nss directory:
Code:
That says to me that I have an issue listing permissions. Fine, I don't really need john to be able to list permissions. I want him to have rwx access to /media/nss/ENG which as you can see from my listing as root shouldn't be a problem since the perms on that dir are 777.
I am able to CD into the ENG directory or any other directory or subdirectory in /media/nss that has equivalent 777 perms, but once in the directories I can't list the contents:
Code:
I can get anywhere and do anything I want under the media/nss folder as john, except listing files. I even tried using an ACL i.e.
Code:
Why this isn't working?
View 8 Replies
View Related
