General :: BackupPC Basic Setup (13)Permission Denied - Not Open Password File: /etc/Backup?
Feb 22, 2011
I am having problems gaining access to the BackupPC admin web page. The error:
Quote:
[Tue Feb 22 16:43:59 2011] [error] [client 192.168.0.2] (13)Permission denied: Could not open password file: /etc/BackupPC/htpasswd [Tue Feb 22 16:43:59 2011] [error] [client 82.30.227.113] access to /backuppc failed, reason: verification of user id 'myhtaccessuser' not configured
Why is this occuring, is there anyway of getting around this? I just cant remember originally on my old system how I set this up.
when I try to su, with the right password I know it is because I have reset it with a sudo, it says su: incorrect password. Looking at /var/log/messages I see su: Unable to open admin password file: Permission denied. This must mean that the file has incorrect permissions and or owner/group. I am wondering if anyone knew where the file was located and the correct permissions/owner/group.
i`m trying to set up a Central Backup Server with BackupPC installed on CentOS 5.6 x86_64, My CentOS has Samba3x / Winbind integrated with Active Directory i found this nice Wiki http://wiki.centos.org/HowTos/BackupPC , to get my BackupPC installed. after installing RPMForge's repo and settin` up the priorities to the repos, http://wiki.centos.org/PackageManagement/Yum/Priorities i get the following error regarding Samba3x Conflicts , i dont wanna miss up my Samba Configuration to install BackupPC, even --skip-broken option does not work for me
I have a cron backup scheme in which I rsync, then tar, then copy files on my internal hard drives to an external (USB) drive. When it works, it works. But I often get a "Permission Denied" message for all of these tasks. how the external drive is auto-mounted so I edited the etc/fstab so that the owner of the cron job is also the owner of the external drive (I think. Unfortunately, I'm not at that machine right now (it's at work), I can't give the exact fstab line (I will post it as an update to this thread next time I am at the machine).) BUT, I still get times when the cron backup runs fine and other times I get the Permission Denied. This is a shared machine that is dual-booted, so what I *think* is going on is that when the machine is rebooted to Fedora, but nobody logs in, I get a Permission Denied for the cron backup. It seems like on days when someone has logged in as the main user and left without logging out that the cron backup runs fine.
I am trying to put a file from one linux machine to my other linux machine. There is absolutely no problem in downloading the file i.e. performing the "get" operation but when I try to upload or "put file" from my host1 to host2 it throws error "Error 0 Permission denied". I am able to put files from host2 to host1 without any problem but not from host1 to host. Infact if I try to tftp even localhost on host2 it throws the same error. Here is my
/etc/xinetd.d/tftp file for host2 service tftp { socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -c -s /tftpboot #disable = yes disable = no per_source = 11 cps = 100 2 flags = IPv4 } And permissions on /tftpboot are 777 [root@LinuxServer /]# ls -ld /tftpboot/ drwxrwxrwx 2 root root 4096 Jan 6 05:21 /tftpboot/ [root@LinuxServer /]# ls -l /tftpboot/ total 16 -rwxrwxrwx 1 root root 11 Jan 6 06:16 new_test -rwxrwxrwx 1 root root 12 Jan 5 06:02 test2
And the command which I am using is : [root@LinuxServer /]# tftp localhost -c put new_test Error code 0: Permission denied And ya here is /etc/sysconfig/selinux file is as under : # This file controls the state of SELinux on the system. # SELINUX= can take one of these three values: # enforcing - SELinux security policy is enforced. # permissive - SELinux prints warnings instead of enforcing. # disabled - SELinux is fully disabled. SELINUX=permissive # SELINUXTYPE= type of policy in use. Possible values are: # targeted - Only targeted network daemons are protected. # strict - Full SELinux protection. SELINUXTYPE=targeted
I tried a 9.10 -> 10.04 upgrade that went fail. I can now get it to the login screen where it gives a hard freeze. Same with recovery. I can get to a command line, but not with networking so
So I finally said screw it, I'm going to doa fresh install. I downloaded and burned 10.04 at work. Not, it is giving me an installer error when I boot from it, but then it will load the desktop from the LiveCD.
All I really want to do is grab some data that I didn't get when I backed up by home directory, then I can go back and do a fresh install. I can even download a new 10.04 CD if I need to because the installation files are screwed up or something.
The problem is that some of the files have permissions on that that show as an 'X' on the icon and it won't let me copy them to my USB backup drive.
How can I copy the files marked with an 'X' that have this permission issue?
I am attempting to make a backup copy of a file, but every time I try to copy the file, I get a "permission denied error -- even when running as root. The file is on a volume mounted as /media/Data . No problems reading/writing other files on the volume.
Here is the info on the file: -rw-------. 1 root MailServer.img
I've tried chown but get the permission denied as well. This is a virtual machine image that runs fine, but even with the VM completely shut down, I get the same error.
If I try the sudo mv command on the file listed below I get the error listed. I am confused. It is my file & I have permissions. Somehow a slew of files on my system are now showing this way. This seems to correspond when I ran rsync from my netbook to sync it up with my desktop where I am having a problem.
Trying to use tcpdump -r TEST, and get permission denied, even though I am logged in as root or super user. Tried using the "chmod a+rw TEST" (any other file for that matters, yes it came from another source) and get permission denied.
I'm having a remote server running SSH, I use the scp from my local computer like this:scp filename.txt username@IP:Port:home/usernameit asks for the password, I supply it, he doesn't accept it for 3 times and then I get "Permission denied (publickey,gssapi-with-mic,password)"
I am trying to install COMSOL 4a in Ubuntu 10.04 and when I try to run ./setup and I am already connected as root the command line gives me a permission denied error.
I'm breaking my head on this.I want to create a development environment. This means that I want to be able to create/change files myself, but php should be able to do the same. I installed a lamp-stack using tasksel. Afterwards I installed phpmyadmin. So far so good. Going to http://localhost shows "it works".
Then I created a folder /home/hwc/www and created a new apache site called hwc, disabled default and enabled hwc that points to /home/hwc/www and has the directive AllowOveride All set. But when I go to http://localhost know I get a 403 Permission denied error. I've tried several trings like changing ownership of /home/hwc/www to www-data:www-data, to hwc:www-data, to hwc:hwc, but all to no avail. Even adding www-data to group hwc and hwc to group ww-data did not help. According to other posts at least on of these solutions should have worked, but it did not. I could probably fix it by letting apache run as hwc, but that doesn't seem right.
I have created a basic ssh server and i haven't done any configuring to it other than to port forward port 22. i am trying to connect to it from a client computer (they are on the same router). i enter the command "SSH <IP of the server>", and it asks me for the password. i have tried "SSH <my user name>@<IP of client>", but it says permission denied.
Quite a few times i have boot puppy linux live and have tried to copy file from the underlying NTFS windows HD only to get an error like permission denied when i try and copy a file to say a USB stick, i think some files copy but i seem to get permission errors with some files.
I Have been trying to change a file in filestarter using sudo /etc/rsyslog.conf. but am getting a permission denied message. How do I get into this file to change it ? Firestarter is working ok but for some reason it cannot open the system log. I Have found what amendments need to be made to get this to work but simply cannot get access to the file
I have created a new file system (fuse) which works fine and is mounted in the local host. I want to be able to mount it from another host. I added it to /ect/exports: /mnt/ltfs *(rw,sync) And restarted nfs. Then from my client host I type:
mount -t nfs myHostName:/mnt/ltfs /mnt/data1
Where /mnt/ltfs is on my local host and /mnt/data1 is on the client host. Note that this is a "FUSE" file system so here is it's local "mount" output: ltfs on /mnt/ltfs type fuse (rw,nosuid,nodev,default_permissions,allow_other) Note thet this is of type "ltfs" but I am told that it should work like its a nfs. ltfs uses fuse under the covers.
I wanted to setup a local Apache2 server for some programming and testing. I installed and got Apache2 working with PHP, MySQL and all works fine. Now I wanted to add an additional directory to somewhere in my /home. And that's where things went wrong. I went to edit /etc/apache2/sites-available/default. This is it:
Code: You don't have permission to access /po/ on this server. So I go to the logfile; which says this: Code: [Sat May 08 16:43:51 2010] [error] [client 127.0.0.1] (13)Permission denied: access to /po/ denied
I tried a lot of stuff using chmod and chown, but all to no avail. I tried to change the ownership of the /home/name/web to root, and to www-data, I changed file permissions to allow executing the files.
I want to access my desktop from my laptop over the internet, after a while I found this [URL] so I followed the instructions "Access your PC over the internet" and "Logging in from another Ubuntu PC". Everything goes well until I try to run the shell script and get this: laptopuser@123.456.7.890's password:
I tried my luck with the passphrase associated with the rsa key, with the password of the laptopuser@laptop and with the password of the desktopuser@desktop but I keep getting Permission Denied (publickey, password).
I am trying to set up remote login via SSH from my Mac to an Ubuntu desktop. Here is the error i am getting:
Code: Permission denied (publickey,password). I'll give background:
- Both computers are on the same network - I'm not using the default port 22 - I have successfully logged in using password authentication, so it isn't a firewall/iptables issue i don't think. I've already worked through those issues! - I haven't set up any tcp wrappers on the server yet, so nothing is being denied - I believe the server sshd_config file is setup correctly. I can post it if needed.
Here's debugging info: bash-3.2$ ssh localuser@xxx.xxx.x.x -v OpenSSH_5.2p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to xxx.xxx.x.x [xxx.xxx.x.x] port xx. debug1: fd 3 clearing O_NONBLOCK debug1: Connection established. debug1: identity file /Users/localuser/.ssh/id_rsa type 1 [Code]....
I'm getting error from KVM when i try to create new machine. I have install group Virtualization. From gui virtual-manager (after being asked for root passwd) tried to create new machine. When pressed on 'Finish' got this 'Permission denied' error: Code: Unable to complete install '<class 'libvirt.libvirtError'> internal error Process exited while reading console log output: char device redirected to /dev/pts/3 qemu: could not open disk image /sonik_data/software_archive/CentOS-5.5-x86_64-netinstall.iso: Permission denied
Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/create.py", line 1567, in do_install dom = guest.start_install(False, meter = meter) File "/usr/lib/python2.7/site-packages/virtinst/Guest.py", line 1023, in start_install return self._do_install(consolecb, meter, removeOld, wait) File "/usr/lib/python2.7/site-packages/virtinst/Guest.py", line 1088, in _do_install "install") File "/usr/lib/python2.7/site-packages/virtinst/Guest.py", line 1059, in _create_guest dom = self.conn.createLinux(start_xml, 0) File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1277, in createLinux if ret is None:raise libvirtError('virDomainCreateLinux() failed', conn=self) libvirtError: internal error Process exited while reading console log output: char device redirected to /dev/pts/3 qemu: could not open disk image /sonik_data/software_archive/CentOS-5.5-x86_64-netinstall.iso: Permission denied
It's running as a root, what permissions we are talking about here? I'm running F14, kernel 2.6.35.10-72.fc14.x86_64, libvirtd 0.8.3
