Running newaliasespostalias: fatal: open database /etc/aliases.db: Permission deniedin my /etc I do not have a aliases.db only an aliases.I cp aliases aliases.db but when I try and install post fix again it gives me the same error and aliases.db goes away.
View 9 RepliesUnable to open pty: Permission denied while trying to login to vps node.
View 2 Replies View RelatedI was able to get the a2ensite command to enable a virtual site because it says "Site xxxxx.com already enabled" when I run the command. My problem now is that even though a site is enabled it says this: Code: /etc/init.d/apache2 restart * Restarting web server apache2
[Tue Apr 20 01:28:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
[Tue Apr 20 01:28:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
[Tue Apr 20 01:28:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
[Tue Apr 20 01:28:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs Should I do a chown or chmod to a file?
when I try to su, with the right password I know it is because I have reset it with a sudo, it says su: incorrect password. Looking at /var/log/messages I see su: Unable to open admin password file: Permission denied. This must mean that the file has incorrect permissions and or owner/group. I am wondering if anyone knew where the file was located and the correct permissions/owner/group.
View 3 Replies View RelatedI'm trying to install Ubuntu on an Aspire laptop with Windows XP. I downloaded 10.04 and burned an ISO image. I boot Windows and open the ISO disk. I open the first choice which is to try Ubuntu prior to a complete installation. The installation starts and proceeds for a few minutes. Then it stops and displays a message 'Permission Denied' and a suggestion to check the installation log. The last few lines are:
[code]...
I installed dhcpd using:
Code:
Now when I try to run it, I get this weird error:
Code:
The error was:
I changed permissions to 777:
Code:
To no avail!
It's got something to do with AppArmor.
I don't think it is installed on this system:
Code:
I'm sooo exausted after two days of fooling with this. The problem: Apr 27 17:29:21 mxkasib dovecot: lda: Error: userdb lookup: connect(/var/run/dovecot/auth-userdb) failed: Permission denied (euid=8(mail) egid=12(mail) missing +w perm: /var/run/dovecot/auth-userdb, euid is not dir owner)
Obviously, dovecot-lda, instanced by postfix, couldn't access the auth-userdb file because of permission. There are plenty of topics over the internet, the problem is really simple. Except for I've got all the permissions needed, or it seems to me so and I'm missing something. Here is some additional information:
[Code]...
I've given all the permissions I could imagine. It's even devil 666, and it still complains.
I'm trying to install 10.10 but it keeps throwing an error. I'll include the error and log file below:
An error occurred: Permission Denied For more information, see the log file: c:...
When, from the live cd I try to execute
Code:
e2fsck -y /dev/sda1
All i get is:[code].......
Here is what i do: make clean make makefiles CCARGS='-DEF_CONFIG_DIR="/opt/product/postfix-2.6.5/etc"
-DEF_COMMAND_DIR="/opt/product/postfix-2.6.5"
-DEF_DAEMON_DIR="/opt/product/postfix-2.6.5/libexec"
-DEF_MAILQ_PATH="/opt/product/postfix-2.6.5/bin/mailq"
-DEF_DATA_DIR="/opt/product/postfix-2.6.5/lib"
-DEF_NEWALIAS_DIR="/opt/product/postfix-2.6.5/bin/newaliases"
[Code]...
make install then i got this error: postfix: fatal: chdir(/usr/libexec/postfix): No such file or directory make: *** [install] Error 1 I don't understand why it's checking the usr/libexec folder for the daemons although I've set the folder to /opt/product/postfix-2.6.5/libexec in the makefile. Here is also the cat of my makedefs.out:
[Code]....
I'm getting error from KVM when i try to create new machine. I have install group Virtualization. From gui virtual-manager (after being asked for root passwd) tried to create new machine. When pressed on 'Finish' got this 'Permission denied' error:
Code:
Unable to complete install '<class 'libvirt.libvirtError'> internal error Process exited while reading console log output: char device redirected to /dev/pts/3
qemu: could not open disk image /sonik_data/software_archive/CentOS-5.5-x86_64-netinstall.iso: Permission denied
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/create.py", line 1567, in do_install
dom = guest.start_install(False, meter = meter)
File "/usr/lib/python2.7/site-packages/virtinst/Guest.py", line 1023, in start_install
return self._do_install(consolecb, meter, removeOld, wait)
File "/usr/lib/python2.7/site-packages/virtinst/Guest.py", line 1088, in _do_install "install")
File "/usr/lib/python2.7/site-packages/virtinst/Guest.py", line 1059, in _create_guest
dom = self.conn.createLinux(start_xml, 0)
File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1277, in createLinux
if ret is None:raise libvirtError('virDomainCreateLinux() failed', conn=self)
libvirtError: internal error Process exited while reading console log output: char device redirected to /dev/pts/3
qemu: could not open disk image /sonik_data/software_archive/CentOS-5.5-x86_64-netinstall.iso: Permission denied
It's running as a root, what permissions we are talking about here? I'm running F14, kernel 2.6.35.10-72.fc14.x86_64, libvirtd 0.8.3
I can't open etc/network/interfaces file comes some permission denied. What can I do?
View 2 Replies View RelatedAfter install TexLive, sudo stop working. If I run sudo:
Quote:
sudo: can't open /etc/sudoers: Permission denied
sudo: no valid sudoers sources found, quitting
Edit: Hal and dbus is not working either, if i startx I don't have network manager or automatic mount of pen and disks.
I installed wvdial on my Satellite Toshiba laptop. All works well but I have to use the <wvdial> command as root. If I try to use it as a user i get an error message Cannot open /dev/ttyACM0: Permission denied So Im just wondering; is it ok to use wvdial as root?
View 2 Replies View RelatedI have installed ubuntu 10.04.2 LTS and followd all the steps from the tutorial from [URL], postfix and dovecot works fine ...but ...is there any way to create email accounts (postfix account) without creating linux accounts for each mail account ?
View 4 Replies View Relatedfresh install of ubuntu karmic server. fresh, vanilla install of openssh-server attempt to connect either via standard ssh, linux client or puTTY win32 client system (both on local LAN)
First connect is great. connection established.
Second connection (via multiple clients) screams that: "WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!" and since I have strict checking, won't let me continue.
So, i do a little
Code:
To flush it out (i have backups,).
Then i try again:
I get the typical "Are you sure you want to continue connecting (yes/no)?" and i say yes. at which point, i offer the password for the username in question and it flat out refuses: "Permission denied, please try again."
Ok, so i have even gone as far as do a complete rip and replace of the ssh server and it's config files, however this continues to loop and repeat.
So, question one: Why does my key change?
Question two: Why am i getting "permission denied" errors on subsequent connect.
I just isntalled LAMP using tasksel and have a problem. Whenever I try to access a page (aside from phpmyadmin, that works well), I get this error... Code: Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0 Fatal error: Unknown: Failed opening required '/var/www/index.php' (include_path='.:/usr/share/php:/usr/share/pear') in Unknown on line 0
I have restarted the computer, restarted apache, etc and still nothing. When I first installed, phpmyadmin was inaccessible, so I ran some command in terminal which apparently created a symlink between phpmyadmin in the user/share dir to the /var/www dir, and curious if this is the problem. I have no clue how to remove this symlink if this is the case, and have phpmyadmin working now due to install using sudo apt-get install phpmyadmin.
I cannot get access to my external hard disk. It says as in the "SUBJECT" above. What should I do? I installed Debian XFCE testing.
View 5 Replies View RelatedHello,
this error spams about 100 times, then the scanner does indeed work. So I'm not completely broken, but the error messages are of concern, and it slows down the process of scanning for the time it takes to do the messages.
Error in console:
libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied. libusb requires write access to USB device nodes.
my sript runs:
scanimage
--device $MODEL
--resolution=$RESOLUTION
-x 5104 -y 6840
my groups:
uid=1000(fogie) gid=100(users) groups=100(users),7(lp),11(floppy),12(mail),15(man),17(audio),18(video),19(cdrom),20(games),21(sloca te),83(plugdev),84(power),86(netdev),93(scanner)
Even a simple:
scanimage -Lv
in console gives this on a separate --current pc as well.
I'm currently running Karmic on a old Dell Pentium 4, and I am having trouble copying files to this box from my laptop which is running Linux Mint Helena. I am able to see and connect to the shared directory on the Dell, copy and execute files from there, but cannot write to it. The permissions have been set to 777 on the shared directory and sub directories within that. The older Dell has a PATA hard disk, 300gb, while my newer laptop has a SATA hard disk. I've read that this can be a problem, and permissions may not be recognized? I'm not able to connect to the laptop from the Dell, neither of the administrator logins work, though I maybe need to do this as root?
Here is the smb.conf file I am running on both machines:
I want to be able to write to my server, not just read and execute. I am also not able to write to the server when logged on to a windows machine on the same network.
Just had a new VPS installed running Ubuntu Server 8.04 Getting some errors when I connect to the server and try to use apt.. only trying to install nano and after messing around I've managed to get the error to change.. but still can't get any further.
error
Code:
# sudo apt-get install nano
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
I want to use SSH to connect to my desktop. I have used Ubuntu 10.10's encryption to encrypt my home folder (thus encrypting my .ssh folder). This means that the OpenSSH doesn't have access to my .ssh folder. When I try to log into SSH before logging in on the local machine I get the following error:
Code:
jason@ONONWARA:~$ ssh jason@192.168.1.152
Ubuntu 10.04.1 LTS
NIHATI
Permission denied (publickey).
If I log onto the machine, then use SSH it works fine. I want to use key based login, One way to get around this error would be use a different authorized_keys file, but I don't know of a way to do this. This is the contents of my sshd_config file:
Code:
# Package generated configuration file
# See the sshd_config(5) manpage for details
# What ports, IPs and protocols we listen for
[code]....
I am using Ubuntu server edition 10.04.1 running in Vmware server 2.02.I am connect via Putty so I can use copy and paste.My first goal is configuring a ftp server using PureFtpd using this guide.In section 10 I need to write this command
cat /dev/null > /etc/pure-ftpd/db/mysql.conf
I am getting this error
almog@Testing:~$ sudo cat /dev/null > /etc/pure-ftpd/db/mysql.conf
-bash: /etc/pure-ftpd/db/mysql.conf: Permission denied
I tried with and without "sudo" and I am getting the same error.
I have created a basic ssh server and i haven't done any configuring to it other than to port forward port 22. i am trying to connect to it from a client computer (they are on the same router). i enter the command "SSH <IP of the server>", and it asks me for the password. i have tried "SSH <my user name>@<IP of client>", but it says permission denied.
View 8 Replies View RelatedI am setting up WCCPV2 with squid with my ASA Box. I need to disable RP Filter with the following commands.
echo 0 >/proc/sys/net/ipv4/conf/wccp0/rp_filter
echo 0 >/proc/sys/net/ipv4/conf/eth0/rp_filter
When i run them as sudo i get a permission denied.
Today, after postfix security upgrade, /tmp permissions changed from 777 to 755 on my Ubuntu Server 10.04.2
View 1 Replies View RelatedI wanted to setup a local Apache2 server for some programming and testing. I installed and got Apache2 working with PHP, MySQL and all works fine. Now I wanted to add an additional directory to somewhere in my /home. And that's where things went wrong. I went to edit /etc/apache2/sites-available/default. This is it:
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /var/www
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory /var/www/>
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Code:
You don't have permission to access /po/ on this server.
So I go to the logfile; which says this:
Code:
[Sat May 08 16:43:51 2010] [error] [client 127.0.0.1] (13)Permission denied: access to /po/ denied
I tried a lot of stuff using chmod and chown, but all to no avail. I tried to change the ownership of the /home/name/web to root, and to www-data, I changed file permissions to allow executing the files.
After upgrading ubuntu server to the latest version (according to apt-get) proftpd stopped working. When I try to execute proftpd I get the following message (when logged in as root or user with root privileges) :
Code:
Line 18 in modules.conf looks like this:
Code:
I've tried removing and re-installing proftpd, but this doesn't help
If I comment line 18 in modules.conf, I just get permission denied on the next LoadModule command...
Can I remove all modules? or is there a way of fixing the permission denied issue?
I am attempting to setup an Ubuntu server as a secondary DNS server. It seems whenever it tries to dump the master file the system log shows Permission denied.let me know if more information is needed.NOTE: where it says example.com I have simply removed my actual Domain name.
Mar 21 21:49:24 ulinux named[14418]: zone example.com/IN: Transfer started.
Mar 21 21:49:24 ulinux named[14418]: transfer of 'example.com/IN' from 192.168.0.15#53: connecte$
[code]....
I am in the www-data group...
Code:
mike@webserver:/var/www$ groups mike
mike : www-data adm dialout cdrom plugdev lpadmin sambashare admin
when I run ls...
Code:
mike@webserver:/var/www$ ls -la
total 8
drwxrwxr-x 2 www-data www-data 4096 2011-04-22 09:30 .
drwxr-xr-x 14 root root 4096 2011-04-20 18:22 ..
-rw-r--r-- 1 root root 0 2011-04-22 09:24 index.html
I assumed that means that the users in the www-data group can read, write and execute within this folder?
But when I try to create a new file/dir I get permission denied message.
I'm having fun messing around with my new LAMP server, but this problem is annoying me now .
(Oh and the index.html file was created by root, it's a blank file and can be deleted)