Ubuntu :: Permission Denied When Trying To Append To File / Fix It?
Feb 8, 2011Sudo echo fuse >> /etc/modules
Any idea why that'd yield a "bash: /etc/modules: Permission denied" error? Here's what "stat /etc/modules" says code...
ADVERTISEMENT
Ubuntu :: Error Moving File: Permission Denied
Dec 4, 2010Im trying to move some files from my desktop to /usr/share/ProjectM Project M is a visualization program, and Im trying to move some presets I downloaded there. The error I get is
Code:
There was an error moving the file into /usr/share/projectM/presets.
Error moving file: Permission denied
I am logged in as administrator, why can't I move these files?
Ubuntu :: Permission Denied While Creating Output File
Jun 3, 2011I tried to run this: ls * -lag > test1.txt
And it gives me a 'Permission denied' for text1.txt (a new file to be created.)
Now I have admin privileges (in fact I'm the only one set up on it) and I can't figure out why I'm getting this 'Permission denied'. Do I have to create the file first and chmod so I can read/write/delete the file?
Networking :: SSH - SCP Permission Denied (File Not Exist)
Oct 13, 2009using a terminal
logged into userMan remotely
[code]
scp /file.txt xxx.xxx.xx:/home/userMan/
[code]
Is the syntax above correct?
I'm trying to copy /file.txt from local machine, to server with userMan
error: /file.txt doesn't exist
General :: Permission Denied While Trying To Put File Using TFTP
Jan 6, 2011I am trying to put a file from one linux machine to my other linux machine. There is absolutely no problem in downloading the file i.e. performing the "get" operation but when I try to upload or "put file" from my host1 to host2 it throws error "Error 0 Permission denied". I am able to put files from host2 to host1 without any problem but not from host1 to host. Infact if I try to tftp even localhost on host2 it throws the same error. Here is my
/etc/xinetd.d/tftp file for host2
service tftp {
socket_type = dgram
protocol = udp
wait = yes
user = root
server = /usr/sbin/in.tftpd
server_args = -c -s /tftpboot
#disable = yes
disable = no
per_source = 11
cps = 100 2
flags = IPv4
}
And permissions on /tftpboot are 777
[root@LinuxServer /]# ls -ld /tftpboot/
drwxrwxrwx 2 root root 4096 Jan 6 05:21 /tftpboot/
[root@LinuxServer /]# ls -l /tftpboot/
total 16
-rwxrwxrwx 1 root root 11 Jan 6 06:16 new_test
-rwxrwxrwx 1 root root 12 Jan 5 06:02 test2
And the command which I am using is :
[root@LinuxServer /]# tftp localhost -c put new_test
Error code 0: Permission denied
And ya here is /etc/sysconfig/selinux file is as under :
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - SELinux is fully disabled.
SELINUX=permissive
# SELINUXTYPE= type of policy in use. Possible values are:
# targeted - Only targeted network daemons are protected.
# strict - Full SELinux protection.
SELINUXTYPE=targeted
Ubuntu :: Cannot Move Channel Config File - Permission Denied
Feb 19, 2010I made a new channels.conf file, but when I try to move it to /usr/local/etc it says permission denied, I need the config to watch digi-tv on ubuntu movie player.
View 3 Replies View RelatedUbuntu Servers :: Permission Denied Dumping Master File?
Mar 21, 2011I am attempting to setup an Ubuntu server as a secondary DNS server. It seems whenever it tries to dump the master file the system log shows Permission denied.let me know if more information is needed.NOTE: where it says example.com I have simply removed my actual Domain name.
Mar 21 21:49:24 ulinux named[14418]: zone example.com/IN: Transfer started.
Mar 21 21:49:24 ulinux named[14418]: transfer of 'example.com/IN' from 192.168.0.15#53: connecte$
[code]....
Ubuntu Servers :: Create A New File/dir - Get Permission Denied Message
Apr 22, 2011I am in the www-data group...
Code:
mike@webserver:/var/www$ groups mike
mike : www-data adm dialout cdrom plugdev lpadmin sambashare admin
when I run ls...
Code:
mike@webserver:/var/www$ ls -la
total 8
drwxrwxr-x 2 www-data www-data 4096 2011-04-22 09:30 .
drwxr-xr-x 14 root root 4096 2011-04-20 18:22 ..
-rw-r--r-- 1 root root 0 2011-04-22 09:24 index.html
I assumed that means that the users in the www-data group can read, write and execute within this folder?
But when I try to create a new file/dir I get permission denied message.
I'm having fun messing around with my new LAMP server, but this problem is annoying me now .
(Oh and the index.html file was created by root, it's a blank file and can be deleted)
General :: Cannot Copy File Even As Root (Permission Denied)
Jan 2, 2011I am attempting to make a backup copy of a file, but every time I try to copy the file, I get a "permission denied error -- even when running as root. The file is on a volume mounted as /media/Data . No problems reading/writing other files on the volume.
Here is the info on the file:
-rw-------. 1 root MailServer.img
I've tried chown but get the permission denied as well. This is a virtual machine image that runs fine, but even with the VM completely shut down, I get the same error.
General :: Trying Sudo MV Command On File - Permission Denied
Jul 17, 2010If I try the sudo mv command on the file listed below I get the error listed. I am confused. It is my file & I have permissions. Somehow a slew of files on my system are now showing this way. This seems to correspond when I ran rsync from my netbook to sync it up with my desktop where I am having a problem.
Potential Source ->
sudo rsync -av --delete --rsh=ssh joe@192.168.1.4:/media/Abyss/Memories/ /home/joe/Pictures/
Type of issue ->
mv: cannot remove `100_2259.jpg': Permission denied
joe@Tux-Box:/media/Abyss/Memories/2009/3-09$ stat 100_2259.jpg
File: `100_2259.jpg'
Size: 243012 Blocks: 480 IO Block: 4096 regular file
Device: 811h/2065dInode: 1312030 Links: 1
Access: (0777/-rwxrwxrwx) Uid: (1000/joe) Gid: (1000/joe)
Access: 2010-07-17 11:41:26.708020712 -0400
Modify: 2009-12-13 21:49:59.501938000 -0500
Change: 2009-12-24 05:54:02.854309200 -0500
Programming :: CSH Permission Denied When Accessing Local File
Mar 9, 2011I've just recently started learning shell scripting and I've been working on a basic csh script, but I've been having a few problems. Here's the script
Code:
#!/bin/csh
echo Enter a file name
$< = FILE ##Name of file
echo enter a size (in kilobytes) to monitor
SIZETOMON = $< ##Size value that's input by user
du -k $FILE = $SIZE ##Size of the file that the user wishes to monitor
while (1)
if $SIZE > $SIZETOMON then
echo ALERT: File size is greater than $SIZETOMON
end
And here's the output
Code:
/home/lucer/foo.txt: Permission denied.
Badly placed ()'s.
I'm not really sure what the issue is with the "badly placed ()'s" or why it won't let me access files that I can access with the same shell when it's not in a script.
Ubuntu :: Encountered Permission Denied When To Install The Openscientist Source File
Jan 2, 2010My linux is Kubuntu 9.04, I encountered Permission denied problem when I wanted to install the openscientist source file (osc_batch_source_16.9) in the following order.
1) cd OpenScientist/16.9/osc_batch/16.9/obuild
2) source setup.sh
3) ./sh/build in this step Permission denied message appeared.
Ubuntu Installation :: Etter.dns - Change The File And Try To Save - Permission Denied
Apr 18, 2010I'm trying to configure my /usr/share/ettercap/etter.dns for dns spoofing with ettercap. but when I change the file and try to save it ubuntu says permision deneight Even when I try doing this from the terminal with sudo. It seems there is know way to change the file.
View 4 Replies View RelatedUbuntu :: Permission Denied Errors When Executing A File On A Different Hard Drive?
Sep 8, 2010I installed Ubuntu 10.10 beta yesterday and most of it is working very well. However, I ran into a problem with permissions today.I have a HDD containing my home folder and a HDD containing my data folder. The HDD with the data folder is mounted on /media/data/data_1.
Code:
jensen@jensen-desktop:~$ ll /media/data/ | grep data_1
drwxrwxrwx 8 jensen jensen 4.0K 2010-09-07 23:10 data_1/[code]....
I made sure I had set a+x rights on the file, tried executing it as root but the permission error stayed.When I copy that same file to my Desktop folder I can perfectly execute it.When it's located on the other hard drive I can't. I tried several command line scripts and they all work when I execute them from my OS hard drive,but not from another hard drive.
Red Hat / Fedora :: 550 Permission Denied Error Message (Cannot Upload File)
Jun 1, 2011I have got centos 5.3 running on my system. I have installed vsftpd and created a separate folder to upload files (upload folder created in/var/ftp/pub). From my client end I can download ftp files but when I try to upload files from my client I get a error message 550: permission denied. The upload folder has full permission ie 777. Checked the ftp config file everything looks ok.
ftp config file
12 anonymous_enable=YES
15 local_enable=YES
27 anon_upload_enable=YES
General :: Can't Delete File (rm: Cannot Remove `nagios': Permission Denied)?
Jul 11, 2010Code:
[serv@local subsys]$ rm -rf nagios
rm: cannot remove `nagios': Permission denied
[code]....
General :: Executing File Resulting In Permission Denied Error
Apr 21, 2010I am wondering why running this file:
Code:
-rwxrwxrwx 1 root root 1247 2010-04-21 18:25 autorun.sh
by issueing this command:
Code:
./autorun.sh
results in this message:
Code:
-bash: ./autorun.sh: Permission denied
I'm logged in as root and prior to the above I did a chown root:root on the file.
General :: Permission Denied When Creating File (Input Document)
Jul 11, 2011I am trying to create:
/etc/X11/Xsession.d/95xinput document
where
/etc/X11/Xsession.d is a folder.
So I enter the above commands:
cd /etc/X11/Xsession.d
nano 95xinput
I type my text and when I try to save it it says that permission is denied.
General :: Using TCPDump To Read Test File - Permission Denied
Oct 21, 2010Trying to use tcpdump -r TEST, and get permission denied, even though I am logged in as root or super user. Tried using the "chmod a+rw TEST" (any other file for that matters, yes it came from another source) and get permission denied.
View 4 Replies View RelatedServer :: File Transfer From Fedora Desktop - Permission Denied
Nov 26, 2010I have a ubuntu server 10.04 with LAMP installed. I also have ubuntu 10.10 on a laptop and can copy files to the server fine. To keep my website uptodate, I usually use Filezilla without any problems. I have just installed Fedora 14 on an old desktop and set up "my stall" ok. The problem is that I cannot copy any files from Ferdoa to the server due to:-
Response: 550 Permission denied.
Error: Critical file transfer error
I have tried to change the directory on the server "/var/www" using chmod -R 775* and chmod -R 777*, but it makes no difference, the file transfer still fails.
Ubuntu :: Mount Dir Using Smbfs To Windows Share Can't Write To File Permission Denied?
Jun 19, 2010Mount a Windows share where my user account has admin privileges. All permissions granted to the share on the windows pc side.Mount statement is as follows:sudo mount -t smbfs -o username=johndoe //winname/directoryname /mnt/tmp/Share mounts ok but does not let me create or write to an existing file. When I select Properties on the directory it says that permissions are unknown on the share looking at it from Ubuntu.
View 4 Replies View RelatedUbuntu :: Permission Denied - Fail At Sudo /usr/lib/nx/nxsetup - Install - Due To File Is Missing
Feb 28, 2011I am installing ubuntu to amazon EC2 by following the steps at [url] The installation works fine.
Then I want to gain Remote Desktop Access to Ubuntu, so I follow [url]
However, fail at sudo /usr/lib/nx/nxsetup --install due to this file is missing.
I then use putty, navigate into /usr/lib/nx to run command below.
wget [url]
But, it always come out with permission denied issue
I also try to upload the .tar.gz file via winscp to any of the possible directories.
All fail with permission denied issue.
Permission denied.
Error code: 3
Error message from server: Permission denied
Request code: 3
Debian :: Cp: Cannot Create Regular File `/mnt/SwSetup/ComboFix.exe': Permission Denied
Aug 27, 2010I'm using my AntiX M8 Live CD to repair a hosed Windows installation, I downloaded ComboFix to ~/home/Desktop and now I'm trying to copy (cp) the file to /mnt/ where I have already mounted the NTFS Windows partition. NTFS3G is integrated into AntiX, right? So why am I having permissions errors?
Code:
mepis1:/home/demo# cp -v Desktop/ComboFix.exe /mnt/SwSetup/
`Desktop/ComboFix.exe' -> `/mnt/SwSetup/ComboFix.exe'
cp: cannot create regular file `/mnt/SwSetup/ComboFix.exe': Permission denied
mepis1:/home/demo# So far, I can read it without any errors in Terminal and navigate through the whole filesystem in ROX-Filer, Do I need to edit /etc/fstab to be able to write to an ntfs drive?
Hardware :: Cannot Create Regular File `/mnt/kingston/linux_guide.pdf': Permission Denied
Dec 16, 2010i installed Slackware 13.1 64 bits in a asus laptop and until now everything is running ok. But when i tried to mount a usb pendrive, i just can mount it as root;well, i thought there would be no problem, i will change permissions with chmod and everyone could access, read and write on it the command :
mount -t ntfs /dev/sdb1 /mnt/kingston
and making ls -l the result is :
drwx------ 1 root root 12288 Dec 8 17:20 kingston
so next i wrote (as root):
chmod 777 -R kingston
and the message was "Operation not supported" i tried also changing the ownership permission :
chown molei:users /kingston
drwxrwxrwx 1 molei users 12288 Dec 8 17:20 kingston
so, apparently i would have total access to the kingston directory; the problem is when i try to copy something to the kingston dir, an error msg. appears :
cp: cannot create regular file `/mnt/kingston/linux_guide.pdf': Permission denied
CentOS 5 :: Su: Unable To Open Admin Password File: Permission Denied
Feb 25, 2011when I try to su, with the right password I know it is because I have reset it with a sudo, it says su: incorrect password. Looking at /var/log/messages I see su: Unable to open admin password file: Permission denied. This must mean that the file has incorrect permissions and or owner/group. I am wondering if anyone knew where the file was located and the correct permissions/owner/group.
View 3 Replies View RelatedDebian :: When Try To Make A Directory Or Upload A File It Returns An Error Saying That Permission Is Denied?
Apr 9, 2010I ftp into the server and see the files, but when i try to make a directory or upload a file it returns an error saying that permission is denied.I am wanting the users to be able to log on with their user account and then be able to have full control over their directories. What can i do to fix this problem?I have enabled port forwarding for ftp. What else is there i can do? If you need any extra information, let me know! I would like to get this fixed asap!Here is my vsftpd.conf file.
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
[code]....
General :: Copy File From The Underlying NTFS Windows HD - Error - Permission Denied
Jan 17, 2010Quite a few times i have boot puppy linux live and have tried to copy file from the underlying NTFS windows HD only to get an error like permission denied when i try and copy a file to say a USB stick, i think some files copy but i seem to get permission errors with some files.
View 1 Replies View RelatedGeneral :: Change A File In Filestarter Using Sudo /etc/rsyslog.conf - Permission Denied
Aug 4, 2011I Have been trying to change a file in filestarter using sudo /etc/rsyslog.conf. but am getting a permission denied message. How do I get into this file to change it ? Firestarter is working ok but for some reason it cannot open the system log. I Have found what amendments need to be made to get this to work but simply cannot get access to the file
View 2 Replies View RelatedGeneral :: Remote Mount Of Nfs Gives Permission Denied Error - FUSE File System?
Apr 6, 2011I have created a new file system (fuse) which works fine and is mounted in the local host. I want to be able to mount it from another host. I added it to /ect/exports: /mnt/ltfs *(rw,sync) And restarted nfs. Then from my client host I type:
mount -t nfs myHostName:/mnt/ltfs /mnt/data1
Where /mnt/ltfs is on my local host and /mnt/data1 is on the client host. Note that this is a "FUSE" file system so here is it's local "mount" output: ltfs on /mnt/ltfs type fuse (rw,nosuid,nodev,default_permissions,allow_other) Note thet this is of type "ltfs" but I am told that it should work like its a nfs. ltfs uses fuse under the covers.
Fedora :: Unable To Check "allow Executing File As Program" In File Properties - Permission Denied
Feb 27, 2011Im trying to run a program but my system won't let me.i used to be able to run executable files without a problem but i can't anymore when i double click the file i get "there is no application installed for executable files" i am unable to check "allow executing file as program" in file properties there is a script file which runs the program but all i get from the terminal is "permission denied"
View 14 Replies View Related