i rebooted my centOS 5.3 server an I got the the errors below. I need to recover the information its very critical.
Loading ahci .ko module
Loading dm-mem-cache .ko module
Device-mapper: uevent: version 1.0.3
Device-mapper: ioct1: 4.11.5-ioct1 (2007-12-12) initialized: dm-devel@redhat.com
Loading dm-log. Ko module
[Code]....
I don't actually have Ubuntu installed to my hard drive yet, I'm still playing with it on the demo CD. I'm new to linux, but the terminal is very familiar to me (iPhone jailbreaker).
Thing is, Terminal is giving me the finger anytime it can. I've yet to successfully do something on it. Simple things like "dpkg" or "cd any directory at all" are being a pain, and I can't put anything in /user/.Is this cause I'm booting it using a "demo CD", or does my computer just hate Ubuntu and I should give up now?
I have AWN installed on Squeeze (AMD64 bit). Many of the applets for it show as a white line so I have run it from a terminal to catch any error messages and get these:
If I then add one of the failing applets that show as a white line it says:
I had some problems and had to upgrade my motherboard. I chose the same manufacturer and haven't had any major problems booting into Fedora 11. (I was totally amazed by this BTW).The only thing is that I have 8 GBs of memory in my computer and System-monitor now says that I only have 3.2. Lastly my nvidia driver which is working correctly, is giving errors about python at bootup. Something about glib being presentAnother weird thing is that GRUB will not let me interrupt it either during normal usage nor with a live CD loaded. This also started happening after I installed Fedora 11 on my old board.
View 9 Replies View RelatedI've got an F10 install on an old IBM machine. I am trying to repartition the hard-drive, but all my fdisk commands in terminal give me errors. I made a DOS boot floppy on another machine so I could do it that way, but when I try to go from A: to C: the computer says I have no hard drive installed.
View 4 Replies View RelatedI got an update notification from update manager just now and tried to update (internet working perfectly) but before it finishes downloading it gives an error of "check internet connection" constantly
View 8 Replies View RelatedI've been trying to burn Suse 11.2 to a DVD now for a couple of days but I keep running into trouble. When verifying a disk after burning Suse on it it keeps giving me errors. I've tried Nero and ImgBurn, different burners, different ISOs, different burning speeds (downloaded via torrent and http) but it keeps giving me the verification error.
The only thing I haven't tried is a different brand of DVDs but until now I've never had any problems with this brand.
today i installed nvidia graphic card drivers for fedora13 using yum, after giving reboot command the system hangs during bootin.
View 1 Replies View RelatedStill I am asked to package a war file as an RPM package. That is an unusual RPM packaging(To me). If you guys could guide me I have a war file inside a folder, that folder is inside a tar file as a SOURCE for RPM package. The structure is like below.
[Code]...
I simply want that the war file from sources is transferred to the web app of my tomcat server through RPM. I try to package it as an RPM, but its always giving me errors in %build stage. When I try to remove %build from stage from the spec file, then it says command missing.
My system details are:
SUSE Linux Enterprise Server 10 (x86_64)
VERSION = 10
PATCHLEVEL = 1
LSB_VERSION="core-2.0-noarch:core-3.0-noarch:core-2.0-x86_64:core-3.0-x86_64"
I use the direct ip instead of the hostname and have recreated the printer several times and the issue doesn't go away. Test prints go through fine to the printer but when I actually try to print something this error comes up from CUPS.
View 5 Replies View RelatedErrors occurred when booting F12 on my laptop.
Code:
Mounting local filesystems: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
...
Starting system message bus: [FAILED]
[Code].....
You have to define PLUGINS in /etc/sysconfig/sipwitch before running sipwitch
Then the system froze there. Press Ctrl+Alt+F2 can enter command line mode.
I have two graphic cards on my laptop, one is Intel and the other is Nvidia. There seems to be something wrong with the Intel card and I changed into the Nvidia card to boot. Then the errors occurred. The driver of the Nvidia card has not been installed. How can I start my network in command line mode? I cannot enter graphic mode now.
I've installed openSUSE 11.3 on my new HP 620 and it boots only when the WLAN card is swithched of in BIOS, otherwise the computer hangs up (processing udev with the last statement b43-pci-bridge...).
View 1 Replies View RelatedWhen I check socket on my box (Centos 5.5) I notice a strange behavior:
fuser 80/tcp
fuser -4 80/tcp
fuser -6 80/tcp
don't give me any result. But apache is running!
tcp 0 0 :::80 :::* LISTEN 25960/httpd
I have a Dell Dimension 690 with a LSI raid controller. I just added two 2Tb drives to the 2 160Gb drives that I currently have. The 160Gb drives used to be set up in a redundant raid configuration and are now set up as stand alone drives. The 2Tb drives are redundant raid. I installed Zentyal server software (formally eBox). It seems that the system is starting up OK but on booting I am getting the following errors:
[Code]....
I do not want to put data files back on the server if it has some errors that will bite me later.
I receive these alerts when booting.
What do they means?
Why some daemons find for config on a non-existent file (/etc/modprobe.conf)?
Maybe because these daemons was disabled and reenabled?
Code:
Code:
And hostname command output is "localhost.localdomain".
Where I can find daemons' default setting list?
i'm trying to install 98se to a 110gb partition so i can dual boot with ubuntu 10 for 98 and 100 for ubuntu after the resize. when i tried making multiple partitions manually for ubutnu putting it on separate partitions i got grub boot errors. the problem i am having every time i try to install 98 it forces me to scandisk it then i have to hit space bar to fix every error i thinks it finds wich is impossible to press it 2 million times. now if I format in a non 98 format and tell it to format in lba it keeps asking for a boot disc, i burned one off but, still kept asking for it. if i do it in non lba, it only saw 2 gigs in 98 and when i went to install ubuntu it was a giant hard drive no partitions. i did try making 3 fat 32s 1 for 98 and then swap and linux partition but, the i got grub errors 17 and 18.
the problem is that bios a cap of 130gb for each drive or in this case partition. it's 320gb WD blue Scorpio. the short i want to dual boot 98se and ubuntu 9.04 with 2 fat32 partitions for storage 110 +100 + 80 = 320 also some visuals.
I try to set up a 5 nodes cluster and a shared Coraid Storage with conga but it fails with "Shared Storage Support" checked.The message is:'A problem occurred when installing packages: Packages of set "Clustered Storage" are not present in available repository' and it is shown under every node on the next sceen after I submit.The pc where conga runs is on the same subnet (192.168.xxx.xxx) and it has the same /etc/hosts of the other nodes.In that pc runs a proxy too and the nodes go out through it (that pc has 2 NICs)Every node (2.6.18-128.1.14.el5-xen-x86_64) is patched whith the last yum update (this morning) the same is for the pc (2.6.18-128.1.14.el5).Every node has 4 NICs , 2 NICc towards the storage the others in bonding towards the WAN.Every node is exactly alike, they have been installed with the ks.cfg generated from the first node and they all have the support for Clustering, Virtualization, and Clustered Storage.
View 1 Replies View RelatedI'm trying to install a dual booting machine with OpenSUSE v11.1 32bit and CentOS v5.2 64bit. I installed OpenSUSE first and allowed it to install and configure grub in the MBR and after that I wanted to proceed with CentOS v5.2. The installation went fine with two notable exceptions:- when I had to configure grub installation parameters, CentOS offered me only 2 solutions: either install it on the MBR of the first hard disk or not installing it at all. Other distributions are more flexible allowing you to install it in the boot sector of the root partition for example. Because I didn't want to ruin the existent grub onfiguration, I reluctantly accepted not to install it for CentOS assuming that I could manually configure the entry later in grub's menu.lst file.
- when I was presented with the options for software components installation, I've clicked on virtualization category/function because I intend to use the machine as a VMware host. There was no guidance on screen at that point and I blindly assumed that by choosing the virtualization function I would get necessary tools and drivers that will help me further on. It seems that this was a wrong move as you can see it below.
After completing the installation, I tried to search for a template or guiding on how the menu entry in menu.lst should look like but the grub directory was empty, not surprisingly because I've told CentOS earlier not to install it. Using the files in the /boot directory from the CentOS installation I tried to improvise a menu entry but it's not working. The boot stops with famous Error 13: Invalid or unsupported executable format. Using the file command to check what kind of files I'm trying to load as kernels I'm getting :
marte:~ # file /mnt/vmlinuz-2.6.18-92.el5xen
/mnt/vmlinuz-2.6.18-92.el5xen: gzip compressed data, from Unix, last modified: Tue Jun 10 19:20:51 2008, max compression
[code]....
I have a laptop that came with Windows Vista (64-bit) installed. I created a new partition and installed XP (also 64-bit) alongside it.Last night I shrunk my XP partition and created another new partition and installed Linux (CentOS 64-bit) on it. I made an error in judgment and didn't allocate enough space, so I need about 10 more gigs for the Linux partition. It boots up and runs, but I need about 10 more gigs of storage for the files I want to keep on the partition (and yes, they have to be on the partition, I definitely need to know how to do this, not a workaround)I went into Vista and shrunk the XP partition by 10 gigs, so now I have 10 gigs of free, non-partitioned space.
As it stands, when I start up the computer I get the GRUB boot loader. I can boot my Linux install or choose "Other" and be taken to the Vista boot loader. From there I can choose XP or Vista to boot.So, my question is... what is the best way to append the 10 gigs of free space to the Linux partition? Is this something I should do inside of Linux? I have the option to do it in Vista, but the partition shows up as "healthy" but without a file system type.I just don't want to screw up the boot loader, partitions or anything else.This isn't my area of expertise, so if anyone could give me a good suggestion or solid answer
Since RHEL is similar to CentOS posting it here.
Upon booting from DVD, i get the below error: "CentOS CD Not found in any of the media drives. Please insert CentOS CD and press OK."
I have IDE Sony DVD RW AW-G170.
BIOS Setting:
Downloaded the CentOS-5.4-i386-bin-DVD image from centos.org from DVD.torrent using bittorrent file.
When booting from the DVD, it gives me the boot prompt:
Upon pressing enter, the log messages of the boot detect the media drive as: hdc: Sony DVD RW AW-G170 IDE ATAPI CD.
The below steps occur:
1) Select the keyboard type: selected us
2) Select the Language : selected us
3) Select the image:
- Local CDROM
- Hard Drive
- NFS Image
...
...
selected Local CDROM
Then the above error "CentOS CD Not found in any of the media drives. Please insert CentOS CD and press OK."
The booting steps does not ask the for media check step.
The below methods have been tried to solve the problem:
- Burnt the image in another 2 DVDs but the same error "CentOS CD Not found in any of the media drives. Please insert CentOS CD and press OK."
- Upon burning the DVD image , selected the DVD read speed: 8x. Upon burning the DVD selected 18x for burning. and then tried to boot with that DVD
- At the boot prompt entered : linux hdc=cdrom replaced hdc=hdb but the error remains.
I'm fairly new to Linux so I'm going to need a step-by-step guide to get me out of this rut. The install of Linux was fine but when I booted up I got this error. VFS: Cannot open root device "302" or unknown-block (3,2) append a correct "root=" boot option;here are the available partitions;
0800 78150744 sda driver:sd
0801 47428608 sda1 <-- this is my Windows partition
0802 30719552 sda2 <-- this is my Linux partition
0b00 1048575 sr0 driver:sr
0b01 1048575 sr1 driver:sr
Kernel panic - not syncing:VFS:Unable to mount root fs on unknown-block (3,2) I guessed from reading this error Lilo isn't pointing to the right partition to boot from? How will I fix this? I read another thread about boot problems on these forums and a guy said to do this:
#mkdir /slacktemp
#mount /dev/device /slacktemp
#chroot /slacktemp
#cd /slacktemp/etc <-- for me it told me that doesn't exist
#vi lilo.conf <-- couldn't do nothing and was frozen
#lilo -v -t -b /dev/device
#lilo -v -b /dev/device
The above solution did not work for me. Can anyone shed a light on a Linux rookie?
1) I've got an up-to-date installation of CentOS 5.4
2) Nvidia 7600 GS (AGP) video card.
I've installed the latest NVIDIA-Linux-x86-190.42 drivers under init 3, which installs (and updates xorg.conf) without error.The system boots just fine and Gnome sits there all pretty.I can play DVDs and watch ..... without problems.However... OpenGL doesn't seem to be working [EG: EVE Online running under Wine]. Nor will the "NVIDIA X Server Settings" load giving me the error that "You do not appear to be using the NVIDIA X driver" etc... I've run nvidia-xconfig and restarted the X server multiple times to no avail. Here's my xorg.conf:
<-snip->
Section "Device"
Identifier "Videocard0"[code]....
I m trying to get this to work but it's been an uphill battle. I've recently reinstalled CentOS 5.4 from DVD that I downloaded yesterday and updated before attempting this again, but alas with the same result.
I've done some installations and configuration of linux systems for different needs and I've never had such a problem:
* The system is Supermicro X6DVL-G mainboard with two Nocona Xeons @ 2,8 GHz, 2 GB DDR333 RAM, 2x160GB Seagate ST3160827AS SATA HDD, ATi RAGE 128 VGA and an external LG USB DVD drive.
* The role of this machine will be Joomla Web/Mail/FTP server for my company's website
I've tried FreeBSD, PC-BSD and now CentOS 5.3. The BSD based OSes installed and ran with no problem but I had trouble configuring them and I decided to move to something little more familiar. However the BSDs didn't detect the integrated Promise RAID controller but CentOS had no problem with that. After some fight with the initial setup I've managed to made it recognizing the external DVD and install the OS. I'm using the whole stripe for the OS, leaving the linux to determine and create the partitions. The installation went smoothly with no errors, but after restart I get the POST messages and then... NOTHING! No error, no panic, nothing, just a blinking cursor. The first thought, confirmed later by several posts I've read, it's the integrated RAID controller making the issue.
Well, I removed the stripe, disabled the controller from the BIOS and installed again, this time with the two separate disks - the sda is bootable with swap and ext3 and sdb is spare with ext3. THE SAME... Third time - only sda is configured for istallation - again NOTHING. Fourth time - sda is configured for installation and No Bootloader option is selected - SAME.
I just installed CentOS 5 today. Had terminal open and got these errors:Quote:Message from syslogd@ at Wed Jul 8 12:38:33 2009 ...localhost kernel: Uhhuh. NMI received for unknown reason a0 on CPU 0.Message from syslogd@ at Wed Jul 8 12:38:33 2009 ...localhost kernel: You probably have a hardware problem with your RAM chipsMessage from syslogd@ at Wed Jul 8 12:38:33 2009
View 4 Replies View RelatedThe problems I was having earlier: [URL]seemed to be solved.
I was not getting any error messages after restart. I should have powered down fully, but did not think that it would make a difference. :(
The same issue is again occurring, but after shutdown ONLY and only on the first boot. After the first boot, a system restart will not cause any error messages. (I have rebooted at least ten or twenty times to make sure)
But after a system shutdown, the first boot hangs up and I get the
"Red Hat nash version 5.1.19.6 starting hdb: timeout waiting for DMA hdb: drive not ready for command"
errors five or six times before each boot. Also the system boots very slowly the first time.
I used the getinfo.sh all command and posted the info to the suggested site here: [URL]
Is it possible this could be a hardware issue? This is an old salvaged HDD. Ive changed everything I c an think of in the BIOS with no results.
I have used the hdparm -d /dev/hdb command and verified that dma is not being used on initial boot or after a shutoff but IS being used after a reboot...
here are the HDD settings
/dev/hdb:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
[Code]....
I installed the VSFTPD from YUM and installed the webmin module.i can connect to the server with Telnet but can�t list files.When i try to connect with a FTP client i get the following errors: An error occured openig that folder on the ftp server. Make sure you have access to that folder.
200 Switching to ASCII mode.
227 Entering passive mode (172,20,1,5,69,210)
How to i choose Users and what folders to use??
I've made a CentOS 5 x86_64 setup last year, around november/december.This system is supposed to operate as a home router/gateway, firewall, nas, small intranet/extranet server and media center.I've previously built a system using older parts (Pentium III 866MHz), and had on it CentOS 5 x86.It successfully served the same purpose (except nas and media center) for quite some time, about 1-2years, until i felt i needed better hardware (more memory, speed and disk space mainly) and 64-bit support.
Part of this intended setup isn't finished (router/gateway, firewall, media center), partially because i'm still lacking a good 1000mbps switch and a supported wireless n 3-antenna card in AP/server mode.In the previous setup, i had router/gateway, firewall and small intranet/extranet server working, with a crappy 100mbps switch (the switch is broken now).the new setup has run pretty well, it had been upgraded 2 times, etc...But since it has been installed, even before any updates, upgrades or repo additions, there has been always warnings/errors during kernel boot.I'm listing my specs, configs, versions and logs bellow. all the partitions, RAID and LVM were created during CentOS initial setup.
Hardware:
Case:1x Cooler-Master CM-690 II Advanced (RC-692-KKN2)
PSU:1x Corsair VX450W (CMPSU-450VX)
[code]....
Im running an update through YUM from my CentOS5 64bit box and came across this error:Transaction Check
Error:
I've done some research on this and found solutions on how to rectify (i.e. reconfig YUM repositories etc.) but still same issue.
I'm running CentOS 5.3 x64 within a 32 bit version of Windows XP via VirtualBox. What I'm trying to do is install Eclipse such that I can code in both C++ and Java. I'm going to need to eventually add the OpenMP library, but that's later on. Right now, I'm just trying to get Eclipse to that point, I have the gcc and jre installed...it's just that Eclipse is not wanting to cooperate.
I did uninstall the open-jdk and install the Java SE 6u14. java version "1.6.0_14" Java(TM) SE Runtime Environment (build 1.6.0_14-b08) Java HotSpot(TM) 64-Bit Server VM (build 14.0-b16, mixed mode)
And the gcc... gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-44) Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
I was able to install the Eclipse SDK using yum...
Eclipse Platform
Version: 3.2.0
Build id: M20060921-0945 (CentOS release 5 (Final))
However when I go to update it using Eclipse's update utility to install from the Eclipse Project Updates (in this case, Eclipse 3.2.2 update) I get:
Unable to complete action for feature "Eclipse Platform" due to errors.
Unable to complete action for feature "Eclipse RCP" due to errors.
Unable to create file "/usr/share/eclipse/plugins/com.ibm.icu_3.4.5.20061213.jar1249125532555.tmp". [/usr/share/eclipse/plugins/com.ibm.icu_3.4.5.20061213.jar1249125532555.tmp (Permission denied)]
[Code].....
I have just installed a fresh copy of CentOS 5.3 and from the get-go, the NIC started dropping packets like crazy. I even closed the port on the switch,. moved the cable to a different port,. All yield the same "dropping packets" behavior. Zero on the errors, just dropping packets. Should I stick a diff nic instead?
View 1 Replies View Related
