Fedora :: Giving Errors About Python At Bootup?
Sep 1, 2009
I had some problems and had to upgrade my motherboard. I chose the same manufacturer and haven't had any major problems booting into Fedora 11. (I was totally amazed by this BTW).The only thing is that I have 8 GBs of memory in my computer and System-monitor now says that I only have 3.2. Lastly my nvidia driver which is working correctly, is giving errors about python at bootup. Something about glib being presentAnother weird thing is that GRUB will not let me interrupt it either during normal usage nor with a live CD loaded. This also started happening after I installed Fedora 11 on my old board.
View 9 Replies
ADVERTISEMENT
May 19, 2009
I've got an F10 install on an old IBM machine. I am trying to repartition the hard-drive, but all my fdisk commands in terminal give me errors. I made a DOS boot floppy on another machine so I could do it that way, but when I try to go from A: to C: the computer says I have no hard drive installed.
View 4 Replies
View Related
Aug 27, 2011
i rebooted my centOS 5.3 server an I got the the errors below. I need to recover the information its very critical.
Loading ahci .ko module
Loading dm-mem-cache .ko module
Device-mapper: uevent: version 1.0.3
Device-mapper: ioct1: 4.11.5-ioct1 (2007-12-12) initialized: dm-devel@redhat.com
Loading dm-log. Ko module
[Code]....
View 1 Replies
View Related
May 24, 2010
I have AWN installed on Squeeze (AMD64 bit). Many of the applets for it show as a white line so I have run it from a terminal to catch any error messages and get these:
If I then add one of the failing applets that show as a white line it says:
View 3 Replies
View Related
Nov 12, 2010
I don't actually have Ubuntu installed to my hard drive yet, I'm still playing with it on the demo CD. I'm new to linux, but the terminal is very familiar to me (iPhone jailbreaker).
Thing is, Terminal is giving me the finger anytime it can. I've yet to successfully do something on it. Simple things like "dpkg" or "cd any directory at all" are being a pain, and I can't put anything in /user/.Is this cause I'm booting it using a "demo CD", or does my computer just hate Ubuntu and I should give up now?
View 5 Replies
View Related
May 31, 2011
I got an update notification from update manager just now and tried to update (internet working perfectly) but before it finishes downloading it gives an error of "check internet connection" constantly
View 8 Replies
View Related
Nov 20, 2009
I've been trying to burn Suse 11.2 to a DVD now for a couple of days but I keep running into trouble. When verifying a disk after burning Suse on it it keeps giving me errors. I've tried Nero and ImgBurn, different burners, different ISOs, different burning speeds (downloaded via torrent and http) but it keeps giving me the verification error.
The only thing I haven't tried is a different brand of DVDs but until now I've never had any problems with this brand.
View 9 Replies
View Related
Jun 5, 2009
I'm trying to get a python script to run on my Netgear ReadyNas NV+, but keeping running into an indentation error. The script should be using feedparser to monitor an RSS feed (like a yahoo pipe) and automatically download the .torrent files. I've checked the script, and I do not believe I am mixing spaces and tabs anywhere, but I'm still not sure why it will not run.
I've already installed python and the python feedparser (required for this script). Or, at least I believe I have the feedparser installed--I'm not sure how to verify it was installed successfully without running this script.
I'd love to know if there is something glaringly obvious that I'm missing here. Script and error message below:
Script:
Code:
View 3 Replies
View Related
Feb 14, 2011
Still I am asked to package a war file as an RPM package. That is an unusual RPM packaging(To me). If you guys could guide me I have a war file inside a folder, that folder is inside a tar file as a SOURCE for RPM package. The structure is like below.
[Code]...
I simply want that the war file from sources is transferred to the web app of my tomcat server through RPM. I try to package it as an RPM, but its always giving me errors in %build stage. When I try to remove %build from stage from the spec file, then it says command missing.
My system details are:
SUSE Linux Enterprise Server 10 (x86_64)
VERSION = 10
PATCHLEVEL = 1
LSB_VERSION="core-2.0-noarch:core-3.0-noarch:core-2.0-x86_64:core-3.0-x86_64"
View 5 Replies
View Related
Jul 6, 2011
I use the direct ip instead of the hostname and have recreated the printer several times and the issue doesn't go away. Test prints go through fine to the printer but when I actually try to print something this error comes up from CUPS.
View 5 Replies
View Related
Nov 30, 2009
Fedora 12 officially uses Python 2.6, good. But the Google AppEngine still goes by Python 2.5 and is showing import errors while i try to start the SDK. Here is the stack trace.
[URL]
View 3 Replies
View Related
Nov 19, 2009
I've upgrade my fedora 11 to 12 by installtion DVD and everything is fine right now.Everything is there and the new system looks good.However,my boot screen is still the same with 11.How can I switch to the new screen?
View 12 Replies
View Related
Feb 17, 2010
I updated to the newest kernel today ( 2.6.31.12-174.2.19.fc12.x86_64 ) via software updates and noticed there is a 10 second pause just after the grub screen goes away and before plymouth comes up. This never happened with the previous kernel. Anyone notice this?
View 1 Replies
View Related
Jul 29, 2010
I want to play a video thru VLC player as soon as when system boots up. is it possible using crontab or any other way to go about it??? Also I want to play a file by telneting to a remote server (eg: the file is present is /media/disk/movie.mpg). is it possible to write a script and execute them using crontab.
View 5 Replies
View Related
May 15, 2011
I am facing bootup issue in Fedora 14.I troubleshoot the bootup issue i m facing probably because I have done change the name of volumes from disk utiltiy. I read somewhere that it should be done from another place (administration option, the last menu of fedora and there is some volume/disk management..like thing that give rod like blue/red picture of disk=>System-config-lvm) rather then disk utility under system tools. I think that my LVM path is not setup..due to rename of volume..it is mismatched somewhere...that includes path...finally using rescue disk i enter in shell prompt and mounted my system using chroot /mnt/sysimage
then found that my /home is empty, so done some readings and found that using mount /dev/vg_brs/home /home
i am able to get my home fixed that now appeared my user and whole data.
but that is till i m in shell prompt. Don't know where and how to fix/add this line so that boot loader of fedora will take this instead of something other that it is taking and not founding resulting in failure to boot with message (in between lines)
View 9 Replies
View Related
Jan 15, 2010
I have a cheap usb kvm that doesn't pass the EDID data back to the computer from the monitor. And now Fedora 12 seems to rely on autodetection of the monitor to start up at the proper resolution. When I have my samsung 712N on the kvm, fedora 12 boots to only 800x600 max resolution. If I connect the monitor directly to the computer video card, fedora sets the screen resolution to the desired 1280x1024 properly.
When booted through the kvm, fedora won't let me detect or select the correct monitor, and I haven't found any way to work around the problem other than pulling the monitor off the cable, connect to the cpu, reboot. After it's booted I can reconnect the monitor to the kvm and the video is fine.
My question is does anyone know how to manually tell Fedora 12 at startup what kind of monitor I'm using and skip the bootup monitor detection? So far I've spent a couple unproductive hours with google to discover this isn't a totally uncommon problem and no site I've found seems to have any solution.
View 2 Replies
View Related
Jan 25, 2009
I get a blank white screen when i try to bootup fedora and ubuntu to install them. I don't know whats wrong, any ideas?
View 1 Replies
View Related
Dec 29, 2009
We need to have the wireless associated with the access point prior to the first login.
Have not been able to get it to work yet. WPA-PSK. wireless will not connect until login.
This is necessary for nfs automount and openldap auth to work. Not a home networking environment.
How to troubleshoot effectively.
View 3 Replies
View Related
Mar 8, 2010
Sometimes, in fact quite frequently, when I boot up my system, PulseAudio does not work. ('Connection Refused'). If I log out of my normal account, log in as root, log out of root, and log back in to my normal account, this seems to reset Pulse Audio and it works again. Seems like a security glitch, but I can't be sure.
Fedora 9
Intel Celeron 1.2GhZ
20 GB HD
384 MB RAM
View 1 Replies
View Related
Mar 16, 2010
When I went to start up the computer, the kernel usually hung at the same place on boot up, although sometimes it booted just fine. The default kernel is 2.6.31.9-174.fc12.x86_64. It's boot up arguments are:
Code:
kernel /vmlinuz-2.6.31.9-174.fc12.x86_64 ro root=UUID=75d16864-ba74-49ef-aaa9-0a1dd3c92254 noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet rdblacklist=nouveau
I also have kernel 2.6.32.7-37.fc12.x86_64, 2.6.31.6-145.fc12.x86_64, 2.6.31.5-127.fc12.x86_64. I have seen the same behavior out of all four of them. Last night I ran Memtest86+ all night. It took eight passes with no memory errors. As far as hard disks go, I have two Seagate Barracuda 1.5 TB drives operating as software RAID 1 (mirroring). One of the drives does have three bad sectors. The motherboard is an Asus P6T6 WS. This morning I plugged in the GP diagnostic chip that came with it, but I'm not seeing a whole lot useful there, except that now it is just displaying "FF" non stop.
I did some poking around on the web, and it looks like "FF" is supposed to mean that the CPU isn't properly seated, which makes no sense because the system monitor software is detecting all four cores perfectly, and I have no other odd behaviors anywhere else. At this point I'm rather at a loss to understand what could be causing the difficulties. Sometimes any of the four kernels boots fine, and sometimes they don't. The funny thing is that on the blue "boot progress bar" all four kernels hang at exactly the same spot if they hang at all. After doing some more poking around, I'm relatively sure that "FF" does NOT mean that the processor isn't seated correctly. I'm going to try contacting Asus and see how far I get towards getting some good info on what the diagnostic codes mean.
View 3 Replies
View Related
Dec 4, 2010
I've been able to get a laptop on Fedora 14 (2.6.35.6-48) working with a Netgear WNA1100 Once up and running, I execute "ifconfig wlan0 up" from root, and everything connects just fine and is stable as long as I stay logged in. But, I haven't found how to do this automatically on boot.
I've tried to use NetworkManager, but I cannot figure out how to get the GUI to show up - it says its running and enabled in the Services gui, but I haven't figured out how to actually use it! I checked to see if the nm-applet is running with ps, and for the user login, I see:
I'm not sure if the "sm-disable" flag is my problem, or how to change it. I'm not even sure if NetworkManager will allow me to set things up for bootup, but that is the path I ran down...
I assume this is a fundamentally easy process to set this up on bootup, but I'm not stumbling across the method. I recall doing this kind of thing years ago when I was an engineer, and before I got my lobotomy to become a manager...
View 1 Replies
View Related
May 27, 2011
I have a problem where the volume in F15 is way too loud. The computer is a Dell Optiplex Gx280 using what is labeled as an Intel ICH6 for the audio card. I have the system volume at about 10% and have to still keep banshee's volume at 5% or lower otherwise it's just too loud. The system saves the volume level between reboots, however I've run alsamixer and noticed that the headphone jack is at max volume.
So, I ran:
Code:
sudo alsamixer -c0
lowered the headphone jack volume by half, then ran
Code:
sudo alsactl store 0
to save that setting. Upon rebooting, the headphone jack is back to 100%, though.
If I run
Code:
sudo alsactl restore 0
then it will restore the settings I saved but it obviously isn't doing this during bootup. How would I run this command at boot?
View 5 Replies
View Related
May 31, 2011
I installed F11 on a SATA 500 GB Hard drive. I plugged this HD in various computers. It worked fine.
However, when I try it on the following platform (the one I have to get it to work): (PC104 bus, AMD 1.1GZ with 512 RAM), I get a file system error during bootup.
On the other hand, the system gave the chance to enter the root password. So, once I did this, I tried to run commands "fsck -f /dev/sda" and "fsck -f /dev/sda1". The command could not find sda or sda1.
I tried the fsck on different platforms (with the same HD), it worked fine.
I returned the CPU board to the vendor, and I am expecting a new board soon. I assumed the problem could be with the board itself. But, I am not sure.
View 1 Replies
View Related
Apr 16, 2009
We are brand new to the Linux platform and just learning. So this is what we have done so far, Installed RHEL 5 on a test machine. Says it was succesfully installed. But when it boots it boots to a blank screen with no prompt or gui or anything just a black screen. Does not accept any input or anything.
We are able to get into the GNU Grub and this is what we see
I can enter b for boot
We would like for this to boot to a GUI interface.
We want to set this up as a simple file server.
View 9 Replies
View Related
May 30, 2011
All of a sudden my production system changed to read only. Ran fsck and it ran for about 5-10min before it crapped out. Now when rebooting, getting an ext3-fs error, attached is an image. The system is on an ESX environment.
View 1 Replies
View Related
Mar 22, 2009
I want to be able to do
sudo ./program.py
instead of always having to do
sudo python program.py
What do I need to change?
View 5 Replies
View Related
Nov 30, 2009
I've already used line split stuff to transform my data into something like this in a text file:
Code:
['1', '1', '3', '20.7505207']
['2', '1', '3', '23.0488319']
['3', '1', '3', '-1.5768747']
['4', '1', '3', '-26.4772491']
[code]....
How can I get this on a python program so I can manipulate it as an array?
View 3 Replies
View Related
Jun 4, 2010
I'm currently using Fedora 12.I'm having trouble ripping a DVD. Every time I use cropdetect in Mplayer, it gives me negative x,y values which makes it impossible for me to use Mencoder to remove the borders. I shall display the info below. Also, may I add that I'm trying to use 2 pass encoding to recieve better video quality. I would like convert the DVD to an AVI file. I've compiled all the binary codes for various codecs so I'm not sure what's wrong.
Also, it can not find any audio tracks on the DVD either. I was successfully able to rip the trailor for a different movie on the DVD to avi which was track 3 no problem (wiith good quality sound that synced up)I'm new to Fedora and Mplayer/Mencoder, but "WinBlows XP" doesn't seem to help with ripping good quality videos so I decided to try something in Fedora.
View 2 Replies
View Related
Mar 17, 2011
I am trying to learn it, understand it, and maybe even become proficient with it (one day... ). After trying a few different flavors, I settled on Fedora XFCE, and installed v14 (i686) in a dual boot setting with Windows. I am running it on an HP laptop.I have had an issue ever since I installed a rather large list of updates a few days ago. One of which was a Linux kernel update to 2.6.35.6-45.fc14.i686 (not really sure if that is significant, but I noticed the issue after selecting this kernel version in the boot menu). Now, anytime I try to add software, or run the update utility I get the error message:Quote:You have failed to provide correct authentication. Please check any passwords or account settings.
More Details:Failed to obtain authentication.There was no dialog to provide my password. I do understand there are alternatives to installing and updating software using yum, and I have been doing that a bit, however I would really like to understand why I am receiving this error. I have seen a few related posts as well as a some similar issues in a bug report, and testing session:bugzilla.redhat.com - 638344General a similar gpk-application issuecannot use Add/Remove software through VNCMy questions are:Is this a bug with one of the updates I downloaded?Is there a way to revert the changes from that update, or do I need to reinstall Fedora?Is this an issue with the User account I created? Is there a general set of options I should enable for myself as the primary user?
View 8 Replies
View Related
Jan 5, 2010
I am facing floating point exception issues in running top on some of my Red-Hat Linux servers
# top
6:45am up 476 days, 52 min, 4 users, load average: 0.00, 0.00, 0.00
109 processes: 108 sleeping, 1 running, 0 zombie, 0 stopped
Floating point exception
When I am executing the same command using strace or ltrace, its running fine.
# ls -lrt /usr/bin/top
[Code]...
View 1 Replies
View Related
