I receive these alerts when booting.
What do they means?
Why some daemons find for config on a non-existent file (/etc/modprobe.conf)?
Maybe because these daemons was disabled and reenabled?
Code:
Code:
And hostname command output is "localhost.localdomain".
Where I can find daemons' default setting list?
how to back out of the Network/Daemons configuration screen, so I can return to the install menu.I just tried the CTRL-O -> <CR> CTRL-X, it did not work.
View 2 Replies View RelatedIn Fedora 14, when i try system-config-selinux these errors are displayed.
/usr/share/system-config-selinux/system-config-selinux.py:71: PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text()
xml = gtk.glade.XML ("/usr/share/system-config-selinux/system-config-selinux.glade",
[code]....
I'm running Ubuntu Server 11.04 with OpenSSH, trying to create an ssh tunnel (for web traffic) to it from my (also Ubuntu) laptop. This is the command I'm using to create the tunnel:
Code: ssh -ND localhost:8080 george@192.168.1.20 I had it all working on a virtual machine.. which was deleted What settings/lines do I need to change/add from the default OpenSSH config files to get tunnelling to work? I've Googled and AllowTcpForwarding is set to yes, as is X11Forwarding.. but it still doesn't work. Chrome can connect to the server, but says the connection was closed before any data was sent.
i got this warning message while booting
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
Errors occurred when booting F12 on my laptop.
Code:
Mounting local filesystems: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
...
Starting system message bus: [FAILED]
[Code].....
You have to define PLUGINS in /etc/sysconfig/sipwitch before running sipwitch
Then the system froze there. Press Ctrl+Alt+F2 can enter command line mode.
I have two graphic cards on my laptop, one is Intel and the other is Nvidia. There seems to be something wrong with the Intel card and I changed into the Nvidia card to boot. Then the errors occurred. The driver of the Nvidia card has not been installed. How can I start my network in command line mode? I cannot enter graphic mode now.
I'm curious as to why system-config-services is not installed by default in Fedora 13. IMO it's a pretty important tool for managing a system. I checked the release notes but could not find any mention of its removal.
View 2 Replies View RelatedI am having problems installing .tar.gz files. Anytime that i try the default way of installing via terminal i keep getting the errors found below
[Eyekay@localhost RPM]$ tar zxvf pidgin-libnotify-0.14.tar.gz
pidgin-libnotify-0.14/
pidgin-libnotify-0.14/ChangeLog
[code]....
I am looking for info about how works automount process, and i didn't find info about the tollowing ...
I wonder ... how can i do to "config" automount process to put all my usb devices in write-back mode as default ... for example ... what file can i change? ... how to do it ?
And another one ... um... how to say to "automount process" ... to put my usb devices into a "deadline" io scheduler .. for example ... how to set io-scheduler for an automount device ?
i am having some issues with dual booting my SL6.1 and Windows. The situation is that i recently acquired an old hard drive from a non-working computer of mine with Windows already installed (i know the windows is functional, as i tested it on my new PC with SL6.1 currently installed & everything runs fine)
The problem is that after editing the grub.config to include windows, windows will no longer boot after an attempt to install a legit version of McAffee anti-virus software which coincidently was only after the first attempt at running both OS's in a dual-boot fashion. Except past the windows start up screen before the dreaded blue-screen.
Which is weird because SL6.1 OS will still boot & works perfectly fine like always, so it doesn't really make sense.
My current setup is:
Disk 1: Solid-State:
Boot Partition
SL6 LVM1: Root Partition
Disk 2: Hard Drive:
SL6 LVM2: User, Temp & Swap Space Partitions (Different LVM to Root)
Disk 3: Hard Drive:
Windows 7 Professional 64-bit
My guess is its windows MBR. The reason i say this is because the Hard Drive contents of the Windows software still appears intact when accessing the drive from the Linux OS. I don't won't to go through the rigmarole of re-installing both OS's. So hopefully their is a relatively simple solution.
Just installed FC10. I edited the /etc/inittab to start FC at the command prompt. However, how can I change the boot so that I can see the daemons loading not just that graphical bar at the bottom of the screen.
View 3 Replies View RelatedA couple of days ago on my Fujitsu Laptop which was nearing its end (in about 2 more years, I'll have to send it to the scrap pile) I had a GNOME Power Configuration error. This is the story of my struggles and my thread of cries for help: I was booting after installing an update for Maverick Meerkat, and I got a message during the load screen that said: INSTALLATION PROBLEM: The configuration defaults for Gnome Power Manager have not been installed correctly. Please Contact your system administrator.
So I dropped into GRUB During my 5th boot (while trying to boot once more in hopes it was just a boot error) and I selected the latest/updated version of Ubuntu, but I dropped into the recovery mode version so I could attempt some commands to try and fix it. Then, I dropped into the root terminal to attempt more commands to avoid specifying my networking device, and typing sudo before the commands. I got on my alternate computer and searched my problem. I installed a whole bunch of crappy commands that didn't do anything, and ended up purging GNOME completely and doing:
[Code]....
Haldaemon, pscd not starting... cannot force to start. Do not start when running service pscd start. Just failed. Boot message is below:
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
[code]...
First of all, ntfs-config does not appear in the menu in openSUSE 11.4 Gnome 2.32. When I try to start it using the run command(Alt + F2) it gives the following error in a small window: Insufficient Rights. You need administrative rights to start this application. I then try to run it as root (su -l or su) and it gives the following error:
[code]...
All these packages and others are already installed in my computer.
I have a jaunty installation which is working fine, and I'm gradually getting a dual boot of karmic (desktop amd64) up to speed to take over from it. I've got a fairly standard ADSL modem/switch/router connected by wires to the machine as eth0.I setup local static IP etc. during installation (no DHCP at all) and it worked fine for quite a while. Then, after an upgrade one day, DNS broke on reboot.After booting now, /etc/resolv.conf is essentially empty (just comments) but the networking service is up. I can ping places out on the web.If I "/etc/init.d/networking restart" then /etc/resolv.conf gets the correct "nameserver" and "search" lines added to it and everything is fine... until next boot.I never really worked out exactly how Ubuntu controls its networking config, and I'm further confused by the changes to the booting setup in Karmic
View 3 Replies View Relatedi rebooted my centOS 5.3 server an I got the the errors below. I need to recover the information its very critical.
Loading ahci .ko module
Loading dm-mem-cache .ko module
Device-mapper: uevent: version 1.0.3
Device-mapper: ioct1: 4.11.5-ioct1 (2007-12-12) initialized: dm-devel@redhat.com
Loading dm-log. Ko module
[Code]....
I have been receiving attack alerts. And I would like to root out the source of the problem. I'll give you the messages. If you could help me prevent this hacker from even being able to attempt these things please any advice is helpful. There have been memory stack attempts, failed sys_admin conversion attempts, password file write attempts etc.....
[Code]...
I've installed openSUSE 11.3 on my new HP 620 and it boots only when the WLAN card is swithched of in BIOS, otherwise the computer hangs up (processing udev with the last statement b43-pci-bridge...).
View 1 Replies View Relatedso i got a problem that making me very sad
i typed down this commands to download the compiz unsupported plugins
sudo add-apt-repository ppa:compiz/ppa
sudo apt-get update
sudo apt-get dist-upgrade
sudo apt-get install compiz-fusion-plugins-unsupported
but after all i got some new plugins(they are few only) and every thing is set to false
and now all my desktop is as *! can't even do any thing
i can't work with any GUI because of this
how to download and install all compiz plugins the supported and unsupported one's with command line too
After a kernel update, the system always updates the GRUB menu, and the newer kernel is the default boot option.However, after an update on my F13 X64 system, the GRUB menu was updated, the config file still sets the default to "1" but if i left the automatic boot it will boot the previous kernel... am I crazy or missing something here?Here is my /boot/grub/grub.conf file:
Code:
#boot=/dev/sda
default=1
[code].....
I receive messages such as the below:
SELinux is preventing /usr/sbin/httpd from using potentially mislabeled filesjk-runtime-status. SELinux has denied the httpd access to potentially mislabeled filesjk-runtime-status. This means that SELinux will not allow httpd to use these files. If httpd should be allowed this access to these files you should change the file context to one of the following types, httpd_tmp_t,
I know how to change the owner of a file and the permissions but what does it mean to change the file context?
I have a Dell Dimension 690 with a LSI raid controller. I just added two 2Tb drives to the 2 160Gb drives that I currently have. The 160Gb drives used to be set up in a redundant raid configuration and are now set up as stand alone drives. The 2Tb drives are redundant raid. I installed Zentyal server software (formally eBox). It seems that the system is starting up OK but on booting I am getting the following errors:
[Code]....
I do not want to put data files back on the server if it has some errors that will bite me later.
I don't actually have Ubuntu installed to my hard drive yet, I'm still playing with it on the demo CD. I'm new to linux, but the terminal is very familiar to me (iPhone jailbreaker).
Thing is, Terminal is giving me the finger anytime it can. I've yet to successfully do something on it. Simple things like "dpkg" or "cd any directory at all" are being a pain, and I can't put anything in /user/.Is this cause I'm booting it using a "demo CD", or does my computer just hate Ubuntu and I should give up now?
I'm trying to boot Ubuntu from a LiveCD in a computer I recently bought that currently has Windows XP on it. The Ubuntu menu comes up when I boot but it always snags on an error "failed to restore CRTC configuration -22" or something like that, and just goes on ad infinitum.
I tried running Linux Mint too and had the same problem, which makes me think it's an issue with the computer itself - which is an Averatec, if that helps.
I am trying install rhel 6 on my rhel 5. I have downloaded rhel6.0-20100715.2-server-i386-dvd1.iso (from redhat ftp site) and burned into dvd. After rebooting I pressed F12 and chose cd installation.
I get the following message on my screen.
"ISOLINUX 3.86 2010-04-01 ETCO Copyright (C) 1994-2010 H.Peter Anvin et al
No DEFAULT or UI configuration directive found!
boot: "
I need to know if there are better burning utilities , I am using the default Brasero with many writing errors
View 2 Replies View RelatedI just set up squid for the first time. I have zero experience with proxy servers. I used this guide:[URL](I also looked at a few other guides such as this one:ttp://ubuntuforums.org/showthread.php?t=320733. However, I wanted to most barebones config to start with and the link I used was the simplest.)So now that I have it set up, I'm testing it with FoxyProxy. It is not working well. I went to speedtest.net. The download and ping tests were just as fast as without the proxy, but the upload test fails completely.Furthermore, many web pages load very slowly or not at all. So performance is very mixed, but mostly poor.
View 8 Replies View RelatedI am getting a strange font problem (see attached screenshot) for a user logging in over VNC Server, I am also logged in over VNC however I am no experiancing any problems... This was the case on CentOS 5.3 and on 5.4. I have tried removing the .vnc dir in the users home dir and re running vncserver so that it recreates it, I found this in the logs:
1. (nautilus:14718): Pango-WARNING **: No builtin or dynamically
2.loaded modules were found. Pango will not work correctly.
3.This probably means there was an error in the creation of:
4.'/etc/pango/pango.modules'
5. You should create this file by running pango-querymodules.
6.Fontconfig error: Cannot load default config file
[code]....
i'm trying to install 98se to a 110gb partition so i can dual boot with ubuntu 10 for 98 and 100 for ubuntu after the resize. when i tried making multiple partitions manually for ubutnu putting it on separate partitions i got grub boot errors. the problem i am having every time i try to install 98 it forces me to scandisk it then i have to hit space bar to fix every error i thinks it finds wich is impossible to press it 2 million times. now if I format in a non 98 format and tell it to format in lba it keeps asking for a boot disc, i burned one off but, still kept asking for it. if i do it in non lba, it only saw 2 gigs in 98 and when i went to install ubuntu it was a giant hard drive no partitions. i did try making 3 fat 32s 1 for 98 and then swap and linux partition but, the i got grub errors 17 and 18.
the problem is that bios a cap of 130gb for each drive or in this case partition. it's 320gb WD blue Scorpio. the short i want to dual boot 98se and ubuntu 9.04 with 2 fat32 partitions for storage 110 +100 + 80 = 320 also some visuals.
I am RHEL 5. I just installed it and when i try to config display it how only two resolution by default 640x480,800x600.No other resolution option is shown. I tried by editing xorg.conf but of no use.
View 2 Replies View Related
