I just installed CentOS 5 today. Had terminal open and got these errors:Quote:Message from syslogd@ at Wed Jul 8 12:38:33 2009 ...localhost kernel: Uhhuh. NMI received for unknown reason a0 on CPU 0.Message from syslogd@ at Wed Jul 8 12:38:33 2009 ...localhost kernel: You probably have a hardware problem with your RAM chipsMessage from syslogd@ at Wed Jul 8 12:38:33 2009
View 4 RepliesWhen try to yum install sendmail geting errors:
View 3 Replies View RelatedI am trying to install "R" on my CentOS 5.2 machine. Arch is x86_64 and I've removed all the x86_32 packages and run a yum update.
I am receiving the following dependency errors when I do a yum install R.x86_64:
I am working on a system with no internet access so I cant use yum. How do I install a feature like X-Windows or GNOME Desktop Environment(using groupinstall) directly from DVD?
View 3 Replies View RelatedCode:bash: /dev/cgroup/cpu/user/8841/tasks: No such file or directorybash:/dev/cgroup/cpu/user/8841/notify_on_release: No such file or directoryAfter these two lines I get a normal working bash prompt.Could be related: Installed Xubuntu, then installed ubuntu-desktop and removed xubuntu-desktop&all xfce stuff.
View 3 Replies View RelatedI try to set up a 5 nodes cluster and a shared Coraid Storage with conga but it fails with "Shared Storage Support" checked.The message is:'A problem occurred when installing packages: Packages of set "Clustered Storage" are not present in available repository' and it is shown under every node on the next sceen after I submit.The pc where conga runs is on the same subnet (192.168.xxx.xxx) and it has the same /etc/hosts of the other nodes.In that pc runs a proxy too and the nodes go out through it (that pc has 2 NICs)Every node (2.6.18-128.1.14.el5-xen-x86_64) is patched whith the last yum update (this morning) the same is for the pc (2.6.18-128.1.14.el5).Every node has 4 NICs , 2 NICc towards the storage the others in bonding towards the WAN.Every node is exactly alike, they have been installed with the ks.cfg generated from the first node and they all have the support for Clustering, Virtualization, and Clustered Storage.
View 1 Replies View RelatedI am having problems installing .tar.gz files. Anytime that i try the default way of installing via terminal i keep getting the errors found below
[Eyekay@localhost RPM]$ tar zxvf pidgin-libnotify-0.14.tar.gz
pidgin-libnotify-0.14/
pidgin-libnotify-0.14/ChangeLog
[code]....
I don't actually have Ubuntu installed to my hard drive yet, I'm still playing with it on the demo CD. I'm new to linux, but the terminal is very familiar to me (iPhone jailbreaker).
Thing is, Terminal is giving me the finger anytime it can. I've yet to successfully do something on it. Simple things like "dpkg" or "cd any directory at all" are being a pain, and I can't put anything in /user/.Is this cause I'm booting it using a "demo CD", or does my computer just hate Ubuntu and I should give up now?
I've got an F10 install on an old IBM machine. I am trying to repartition the hard-drive, but all my fdisk commands in terminal give me errors. I made a DOS boot floppy on another machine so I could do it that way, but when I try to go from A: to C: the computer says I have no hard drive installed.
View 4 Replies View Relatedi installed Ubuntu in italian language. Now I would like to see the error commands in english.For example if i write: $ mmmm
This is showed: mmmm: comando non trovato
I would like that mmmmm: command was not found is showed.
The problems I was having earlier: [URL]seemed to be solved.
I was not getting any error messages after restart. I should have powered down fully, but did not think that it would make a difference. :(
The same issue is again occurring, but after shutdown ONLY and only on the first boot. After the first boot, a system restart will not cause any error messages. (I have rebooted at least ten or twenty times to make sure)
But after a system shutdown, the first boot hangs up and I get the
"Red Hat nash version 5.1.19.6 starting hdb: timeout waiting for DMA hdb: drive not ready for command"
errors five or six times before each boot. Also the system boots very slowly the first time.
I used the getinfo.sh all command and posted the info to the suggested site here: [URL]
Is it possible this could be a hardware issue? This is an old salvaged HDD. Ive changed everything I c an think of in the BIOS with no results.
I have used the hdparm -d /dev/hdb command and verified that dma is not being used on initial boot or after a shutoff but IS being used after a reboot...
here are the HDD settings
/dev/hdb:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
[Code]....
I installed the VSFTPD from YUM and installed the webmin module.i can connect to the server with Telnet but can�t list files.When i try to connect with a FTP client i get the following errors: An error occured openig that folder on the ftp server. Make sure you have access to that folder.
200 Switching to ASCII mode.
227 Entering passive mode (172,20,1,5,69,210)
How to i choose Users and what folders to use??
I've made a CentOS 5 x86_64 setup last year, around november/december.This system is supposed to operate as a home router/gateway, firewall, nas, small intranet/extranet server and media center.I've previously built a system using older parts (Pentium III 866MHz), and had on it CentOS 5 x86.It successfully served the same purpose (except nas and media center) for quite some time, about 1-2years, until i felt i needed better hardware (more memory, speed and disk space mainly) and 64-bit support.
Part of this intended setup isn't finished (router/gateway, firewall, media center), partially because i'm still lacking a good 1000mbps switch and a supported wireless n 3-antenna card in AP/server mode.In the previous setup, i had router/gateway, firewall and small intranet/extranet server working, with a crappy 100mbps switch (the switch is broken now).the new setup has run pretty well, it had been upgraded 2 times, etc...But since it has been installed, even before any updates, upgrades or repo additions, there has been always warnings/errors during kernel boot.I'm listing my specs, configs, versions and logs bellow. all the partitions, RAID and LVM were created during CentOS initial setup.
Hardware:
Case:1x Cooler-Master CM-690 II Advanced (RC-692-KKN2)
PSU:1x Corsair VX450W (CMPSU-450VX)
[code]....
i rebooted my centOS 5.3 server an I got the the errors below. I need to recover the information its very critical.
Loading ahci .ko module
Loading dm-mem-cache .ko module
Device-mapper: uevent: version 1.0.3
Device-mapper: ioct1: 4.11.5-ioct1 (2007-12-12) initialized: dm-devel@redhat.com
Loading dm-log. Ko module
[Code]....
I upgraded to 11.04, but the updgrade crashed, and now it has some errors with Unity crashing every time I open a terminal. Is there any way to re-install without having to reconfigure all my programs? I am running a dual-boot.
View 3 Replies View RelatedIm running an update through YUM from my CentOS5 64bit box and came across this error:Transaction Check
Error:
I've done some research on this and found solutions on how to rectify (i.e. reconfig YUM repositories etc.) but still same issue.
I'm running CentOS 5.3 x64 within a 32 bit version of Windows XP via VirtualBox. What I'm trying to do is install Eclipse such that I can code in both C++ and Java. I'm going to need to eventually add the OpenMP library, but that's later on. Right now, I'm just trying to get Eclipse to that point, I have the gcc and jre installed...it's just that Eclipse is not wanting to cooperate.
I did uninstall the open-jdk and install the Java SE 6u14. java version "1.6.0_14" Java(TM) SE Runtime Environment (build 1.6.0_14-b08) Java HotSpot(TM) 64-Bit Server VM (build 14.0-b16, mixed mode)
And the gcc... gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-44) Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
I was able to install the Eclipse SDK using yum...
Eclipse Platform
Version: 3.2.0
Build id: M20060921-0945 (CentOS release 5 (Final))
However when I go to update it using Eclipse's update utility to install from the Eclipse Project Updates (in this case, Eclipse 3.2.2 update) I get:
Unable to complete action for feature "Eclipse Platform" due to errors.
Unable to complete action for feature "Eclipse RCP" due to errors.
Unable to create file "/usr/share/eclipse/plugins/com.ibm.icu_3.4.5.20061213.jar1249125532555.tmp". [/usr/share/eclipse/plugins/com.ibm.icu_3.4.5.20061213.jar1249125532555.tmp (Permission denied)]
[Code].....
I have just installed a fresh copy of CentOS 5.3 and from the get-go, the NIC started dropping packets like crazy. I even closed the port on the switch,. moved the cable to a different port,. All yield the same "dropping packets" behavior. Zero on the errors, just dropping packets. Should I stick a diff nic instead?
View 1 Replies View RelatedMy box is centos 5.3 x86. At booting, ipsec_setup messages are coming as attached picture.
And dhcpd also comes "failed".
How to figure out why there are errors on bond0(eth0)
Transfer speed is in KB
I've installed a 500 Mb WD HD (Sata3) in my Centos 5 Server (AMD QuadCore) - Linux 2.6.18-128.el5 #1 SMP (x86_64)
Fdisk keeps failing with the following message - kernel: ata1: SError: { HostInt Handshk }
Tim Weil
Silver Spring, MD.
tweil@securityfeeds.net
When using YUM UPDATE from the prompt more than 230 items are scheduled for update however when the download process has completed I receive errors regarding Perl dependences such as:
file /usr/lib/perl5/5.8.8/List/Util.pm from install of perl-5.8.8-27.el5.x86_64 conflicts with file from package perl-5.8.8-18.el5_3.1.i386
I am unsure how to overcome this. It occurs on two different servers.
I am a complete novice when it comes to Linux, but want to learn, and installed CentOS5 on an old P4 Dell I had lying around.
Dell Dimension 8100 BIOS is version A02
Install seemed to go fine, but when I power up I get the following message
Red Hat nash version 5.1.19.6 starting
hdb: timeout waiting for DMA
hdb: drive not ready for command
this happens a few times each, then CentOS finally loads.
If Im understanding this right, DMA is direct memory access.
Is it possible the hard drive, motherboard etc does not support this?
Not sure on what is going on here. The server is RAID1 through hardware RAID. It was running an unusual high load so I rebooted it. Now it won't boot up. I am getting these errors after the CentOS boot screen:sda: Current [descriptor]: sense key: Medium ErrorAdd.Sense: Address mark not found for data field
end_request: I/O error, dev sda, sector 3040555357
device-mapper: raid1: A read failure occurred on a mirror device.
device-mapper: raid1: All sides of mirror have failed.
[code]....
We are currently troubleshooting the following error, which was repeatedly being displayed on the console:
kernel: Northbridge Error, node 2<0>K8 ECC error."
After replacing all of the memory, the error remained, so we tried updating to the latest kernel. (Currently having to use centos-plus because we are using XFS)
After the kernel update the error disappeared fro 5 days (previously UNHEARD of - would often repeat several times a day), it appeared again and hasn't appeared since.
It does not seem like any real damage is done here - and I would like to suppress this error somehow. Optimally I would like it to only be forwarded to the log files - and NOT be displayed on the console.
Could someone point me to an easy way to set that up?
I just tried to install CentOS 5.4 on my notebook (HP G42-214BR), I use Windows 7 at the moment.
On the first time I got W7 installed at C: and couldn't istall centos on it. Before trying again I went to Windows and free something like 40GB from C:, but the disc where C: is went from basic to a dynamic disc.
After that I tried to install, and got some errors like:
And the final row was like:
And the installation don't go any further than this. What is going wrong?
i've got a server (blade on chassis) using Centos5.6. One partition is a LUN on SAN and the hardware used is a QLogic QMI3472 (qla2xxx driver) the kernel used is 2.6.18-238.12.1.el5
and i've got a lot of error message when i used the LUN partition with this log kernel (complete log attached to this message)
qla2xxx 0000:0c:00.0: scsi(3:1:0): Abort command issued -- 1 4c5 2002.
qla2xxx 0000:0c:00.0: scsi(3:1:0): Abort command issued -- 1 4c6 2002.
qla2xxx 0000:0c:00.0: scsi(3:1:0): Abort command issued -- 1 4c8 2002.
qla2xxx 0000:0c:00.0: scsi(3:1:0): Abort command issued -- 1 4cb 2002.
I've found this message [URL] concerning qla2xxx (but git.kernel.org not available now...)
I've tried to upgrade to Centos to 5.7 and upgrade the kernel with yum install kernel. The upgraded kernel is 2.6.18-274.3.1.el5.
But this bug seem to be corrected in 2.6.20 branch. Is the patch provided to the link inlcuded in kernel-2.6.18-274.3.1.el5???
I recently just installed centos, but it appears that when I installed it v 0.9.8e was installed consequently, all the lib's etc. are /lib/libssl.so.0.9.8e instead of an ordinary /lib/libssl.so.0.9.8 etc. and this is causing some problems for me, as programs are looking for /lib/libssl.so.0.9.8, and even if i symlink/copy/move /lib/libssl.so.0.9.8e to /lib/libssl.so.0.9.8 there are still some errors occurring. I had been reading that supposedly yum is meant to have a "yum downgrade" option, however it doesn't appear to be recognised when I run it on my centos server.
View 2 Replies View RelatedI am new to CENTOS (5.2) and more importantly new to linux. Any time I try to gcc compile something, it always throws random errors. I yum installed development-tools which is what I have seen other threads suggest but that did not solve the issue. I still get the same errors. I cannot find a common error among the many things I have attempted to compile.
Here is my most recent file for an example made when trying to compile up-imapproxy :
gcc -g -O2 -I. -I./include -c -o src/icc.o src/icc.c
gcc -g -O2 -I. -I./include -c -o src/main.o src/main.c
src/main.c: In function "int main(int, char**)":
src/main.c:618: error: invalid conversion from *void* to *void* (*)(void*)
src/main.c:618: error: initializing argument 3 of int pthread_create(pthread_t*, const pthread_attr_t*, void* (*)(void*), void*)
src/main.c:646: error: invalid conversion from int* to socklen_t*
src/main.c:646: error: initializing argument 3 of int accept(int, sockaddr*,socklen_t*)
src/main.c:675: error: invalid conversion from void* to void* (*)(void*)
src/main.c:675: error: initializing argument 3 of int pthread_create(pthread_t*, const pthread_attr_t*, void* (*)(void*), void*)
make: *** [src/main.o] Error 1
Need to know if there are any known errors allocating disk space using rsync. I have recently setup a small file backup server (2 500GB drives) running Centos 5.2, with a rsync daemon (via xinetd). However I have noticed that after about a week of usage, if I reboot, then the disk that rsync uses, has a lot of multiply claimed blocks and inode errors, such that I have to run fsck multiple times to fix. This has happened a couple of times now so I don't think that its random.
View 11 Replies View Related