Is it possible to back port the centos5 USB HID core driver version 2.6 back to centos4 USB HID core driver version 2.0?
View 2 Replies
I've been searching for an hour or so and can't seem to find a concrete answer. My endgame is having Ubuntu successfully installed (either 9.10 or 10.04) with a fully working Ati 4870x2. I desperately need some help on finding the proper configuration of OS version and driver version. I installed 10.04 with the 10.3 driver package from ATI's site and it was a no go - I had nothing but problems.
I would like to have full 3d acceleration so I can play some games through Wine. This is a powerful card - I know ATI doesn't have a great reputation in the Linux world but I really hope there is a driver version I can install to get some good results.The rest of my specs are in my signature I need to install 64 bit Ubuntu to make use all of the system and video ram.
i download the rpm package of gcc .
View 10 Replies View RelatedIs it possible to just roll back the version of Mesa on my install to an earlier version...I think this is the key to getting my game to work.
View 2 Replies View RelatedCurrently using Nvidia driver version 195.36.31, it's the version that works with Nvidia-kernel-dkms, would updating Nvidia driver to the current 275.09.07 driver version break my setup?
View 3 Replies View RelatedWhat is the best place to get an updated nVidia video driver for CentOS 5.5? Is there a CentOS package available that will update it? Or is it best to download it directly from nVidia? Also, I do not have an internet connection on the machine, so it will have to be a manual download and installation.
View 1 Replies View RelatedWhere can I get the wireless driver for Fedora core 10. I am using a 64 bit system with a hp pavilion notebook.
View 7 Replies View RelatedI try to configurate a POS-System (Point of Sale - i hope pay desk is the right english word for it). The System is a BattleNetX and a Touch-Display (BA73-A) from the concern named Wincore Nixdorf (Germany). Currently, I try to install the driver for the Touchpanel on Fedora Core (12 I hope, but it can [edit: i mean can not] be important because the driver is older than FC12 ). Because, I am not the Linux adept, I work contiguous on the manual[1]. Now, I have a problem by a step. I must compile a adjust driver for the Kernel. But 'make' give me everytime a error. Here you see:
[code]...
using 10.04.3 i have removed virtualbox 4 and return 3.1.6 it seems to have added ~5 seconds to my boot time (at least at the ubuntui plymouth splash screen) and i had it down to ~9 seconds before as a perfectionist it is getting under my nerves my guess it it left something to enable usb support in virtualbox here is part of my dmesg
Code:
[ 3.712963] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 3.714460] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 3.719702] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 3.722055] usbcore: registered new interface driver hiddev
[Code]...
As this seems not yet to be covered in openSUSE Graphic Card Practical Theory Guide for Users I am asking here.
The Motherboard is an Asus P7H55-M Pro with Intel Core i3 530@2.93GHz. openSUSE 11.3 assigns the i915 driver by default:
Code:
# lspci -vk
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 8383
Flags: bus master, fast devsel, latency 0, IRQ 30
code....
I got the weekly updates; libc files and an xorg core file from memory. Thinking now the xorg core possibly rewrote my xorg.conf!seems to have killed the restricted ATI driver. I can boot from kernel 2.6.24.26 but 27, the one I did the updates, after the Ubuntu progress bar I get a black screen. Booting from 26 I get the low resolution graphics guff and need to set it manually each time. Go to Sys->Admin->Hardware Drivers, and sure enough, the ATI driver is 'Not in Use'. Switch it on, try booting into 27, black screen.
Phew, back to 26, change to manual config, get back in, see ATI driver is off again, leave it off and leave manual graphics resolution and config, boot back into 27, everything is stretched and out of proportion!! But I can at least get in. Switch ATI driver on in there, reboot into 27, black screen.This is pretty urgent as my wife is end of semester uni stuff and needs this machine. Worse, so am I and have even more on the plate (but at least have a computer!),
In lmms there is no sound and it says:
No audio-driver working - falling back to dummy-audio-driver
in the command prompt. Sound works everywhere else just not lmms.
We have a small cluster of 20 HP systems, all running CentOS 5.3 in an NFS-root environment. Half are quad-socket, quad-core Xeon E7340 @ 2.40GHz (total 16 cores), the other half are 8-socket, quad-core Opteron 8354 (total 32 cores). All systems have a Mellanox Infiniband adapter ("Mellanox Technologies MT25418 [ConnectX VPI PCIe 2.0 2.5GT/s - IB DDR / 10GigE] (rev a0)")
With kernel 2.6.18-128.1.6.el5, infiniband works fine on all systems.
With the update to kernel 2.6.18-164.11.1.el5 (and both types of node running the same NFS-root image), the 16-core Xeons still work fine. Infiniband no longer works on the 32-core Opterons. Specifically, either the ib0 interface fails to appear, or it does appear but when configured with an IP address, doesn't actually work. In either case, loading the IB kernel modules takes a long time, but I haven't instrumented the load script yet to see which module, if any, is at fault. More errors listed below.
However, if I tweak the BIOS of the 32-core systems to reduce the per-socket core count to 2 (so effectively 8-socket, dual-core, down to a total of 16 available cores), Infiniband starts working again. Putting it back to 32-cores makes it fail. Booting the older kernel makes it work again. In summary: old kernel, IB works on all systems. Newer kernel, IB only works on 16-core systems.
Updating the IB firmware from 2.5.0 to 2.7.0 (latest available) doesn't help. I also did a full 'yum update' to make sure that libmlx4, openibd all other associated packages were up-to-date. Doesn't help either.
Some errors that appear on 32-core nodes:
ib_query_port failed (-16) for mlx4_0
ib_query_port failed (-16) for mlx4_0
mlx4_core 0000:04:00.0: SW2HW_MPT failed (-16)
mlx4_core 0000:04:00.0: SW2HW_MPT failed (-16)
[Code]....
I installed the new version of Chrome yesterday and all of the fonts are way too small and the pages don't look right at all. I tried doing the page zoom, but that makes the pages look even worse. Has anyone had the same issue? Is there a fix? Is there a way to revert back to version 5?
View 2 Replies View RelatedI added a PPA repository to my sources list in order to install a package. After a day, i decided i didn't like the software, so i uninstalled it & removed the PPA from my sources list. Everything is still working just fine.
However, Synaptic is telling me that there is a "local or obsolete" package left over from the software i had originally installed. I can't remove the package because it is something that my entire desktop depends on (in Synaptic Package Manager, when i mark it for "Complete Removal," or even just "Removal," it says that pretty much everything else will be removed with it).The package i would like to "roll back" is libgtk2.0-common (2.24.0-1.1). although i had originally got this from a PPA, a very close version is available on Debian experimental here, which is version (2.24.0-1).
I did an update to Firefox 3.6.16 and now it crashes each time it loads the homepage. I don't want to use Firefox 4 yet because some of the addons are still incompatible. So, how do I get the previous version of Firefox 3.6.15 for Ubuntu 10.10?
View 2 Replies View RelatedI have Fedora 11 on my machine. It comes with gcc 4.5. However, I am trying to compile code that require gcc 4.1. How do I install gcc 4.1 on my machine and still have 4.5 there as well? and how do I uninstall 4.5 gcc if I need. I was trying to use yum, but it did not work. Not sure what package I need.
View 5 Replies View RelatedI just did an update of new files including the new linux kernel (Ubuntu 10.04LTS) and it killed my opening GRUB bootloader screen plus the NEW firefox update is working dog slow. How to I get the GRUB screen back so I can go back to an earlier kernel version??
View 1 Replies View Relatedbouncing icon and spinning icon in toolbar for 10-20 seconds, then nothing. Is there a special log file to be found for mozilla errors? (couldn't find anything useful in or near /var/log/messages or warnings all dependencies of associated programmes seem to fulfil dependencies, but obviously something isn't right. Does anyone else have the same problem?
[code]...
i am running gigabyte GA-M68M-S2P and AMD sempron 2.7. the problem is when i try to run dual core. it will boot and run for 2mins then it crashes. single core runs perfect.
View 6 Replies View RelatedI was having touchpad issues out of the blue so I tried a fix where I do this: sudo sh -c "echo options psmouse proto=exps > /etc/modprobe.d/psmouse.modprobe" Unfortunately I only found out afterward that this replaced my touchpad driver with the mouse one, and as a result I don't even have the tab menu that is normally under the "mouse settings".
View 2 Replies View RelatedI just loaded F14 on an old Dell Dimension 3000 with a dual core processor but only one is showing. Here's the output from top:
processor: 0
vendor_id: GenuineIntel
cpu family: 15
model: 4
[Code]....
I have a command line OCR program called OCR Shop XTR (Vividata corp) that I am using on a system with a 6-core AMD chip. I changed the bios so that the 6-cores were activated, but htop shows me that while the program is running, I am only getting activity on one core (the program maxes out the one core with consistent usage between 97% and 100%).
I have read that many programs are not written to take advantage of multiple core cpu's. However, I am just hoping that there is some way to get this program to take advantage of the extra cores. Does anyone know of a way to invoke programs from the command line which would spread the workload out among additional cores?
Here is the output of uname -a:Linux linux 2.6.37.1-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 i686 athlon i386 GNU/LinuxAnd here is the output for one of the cores from cat /proc/cpuinfo:processor : 5
vendor_id : AuthenticAMD
cpu family : 16
model : 10
model name : AMD Phenom(tm) II X6 1100T Processor
stepping : 0
[Code].....
Just a quick question. Does Kubuntu Karmic support core 2 E8500 out of the box or do you need the SMP kernel?
View 3 Replies View RelatedIs there any Linux API that will let me control on what core will a thread run? If not, do I have to use assembly language?
View 2 Replies View RelatedOkay I posted about this a while ago, and i got my wired network to work, but now i need my wireless card driver to work. I have been doing research and I found something called ndiswrapper which drivers from windows working in linux. I typed in lspci in the terminal and it gave me my specs of my wireless card which is a:
-Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
-Some people said there is no original driver for this card, so you need to use ndiswrapper, I was wondering does anybody know what this is, how do i use this, and help me out to get my wireless card going. If you give me instructions, please be really specific as I am really new and still getting the hang of commands.
I have now installed Wheezy on two different hard drives and in each case it seems only one CPU of my dual core CPU computer is recognized. System Monitor, Gkrellm and lscpu show just one when prior to the new install the old Wheezy showed both CPU's. I have put the hard drive into two other computers with dual core CPU's and all show just one CPU.
Interestingly System Profiler and Benchmark (hardinfo?) > Devices > Processors now show a large amount of processor infomation when with the old Wheezy I would only see both CPU's listed and nothing else.
I've a Compaq CQ61 laptop, and i noticed that one of the cores is always at 100%.
I didn't check the duration of the battery but surely it will "eat" my battery in a hurry
I recently read in a forum that by default the Linux kernel only activates one of two cores in a dual core processor. Searching online gave one option to find out and that was the mpstat command. I therefore ran the command and got the following output.As the result says, it shows only 1 cpu. I was wondering what I could do to activate both cores in my machine, and whether doing so was going to cause me any problems.
View 14 Replies View RelatedAssume someone bind a particular process to a particular CPU core(In multi core machine) by using sched_setaffinity() like functions. Then how we can get that process running core id and CPU core utilisation of that process on that running CPU core(Pragmatically or by a Linux command)?.
View 5 Replies View Related
