Fedora :: Install Driver For Touchpanel On Core

Apr 14, 2010

I try to configurate a POS-System (Point of Sale - i hope pay desk is the right english word for it). The System is a BattleNetX and a Touch-Display (BA73-A) from the concern named Wincore Nixdorf (Germany). Currently, I try to install the driver for the Touchpanel on Fedora Core (12 I hope, but it can [edit: i mean can not] be important because the driver is older than FC12 ). Because, I am not the Linux adept, I work contiguous on the manual[1]. Now, I have a problem by a step. I must compile a adjust driver for the Kernel. But 'make' give me everytime a error. Here you see:

[code]...

View 5 Replies


ADVERTISEMENT

Software :: Install Older Version Of Gcc 2.95.3 In Fedora Core 8 Or Fedora Core 12?

Mar 14, 2010

i download the rpm package of gcc .

View 10 Replies View Related

Installation :: Get Wireless Driver For Fedora Core 10?

Jan 20, 2009

Where can I get the wireless driver for Fedora core 10. I am using a 64 bit system with a hp pavilion notebook.

View 7 Replies View Related

Fedora :: Broadcom WLAN Wireless Driver Fedora Core 11

Aug 26, 2009

Okay I posted about this a while ago, and i got my wired network to work, but now i need my wireless card driver to work. I have been doing research and I found something called ndiswrapper which drivers from windows working in linux. I typed in lspci in the terminal and it gave me my specs of my wireless card which is a:
-Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)

-Some people said there is no original driver for this card, so you need to use ndiswrapper, I was wondering does anybody know what this is, how do i use this, and help me out to get my wireless card going. If you give me instructions, please be really specific as I am really new and still getting the hang of commands.

View 1 Replies View Related

CentOS 5 :: Back Port The 5 USB HID Core Driver Version 2.6 Back To 4 USB HID Core Driver Version 2.0?

Nov 3, 2009

Is it possible to back port the centos5 USB HID core driver version 2.6 back to centos4 USB HID core driver version 2.0?

View 2 Replies View Related

Fedora Installation :: Dual Core Only Showing Single Core On F14?

Nov 3, 2010

I just loaded F14 on an old Dell Dimension 3000 with a dual core processor but only one is showing. Here's the output from top:

processor: 0
vendor_id: GenuineIntel
cpu family: 15
model: 4

[Code]....

View 2 Replies View Related

Fedora Installation :: Upgrading From Core 4 To Core 10?

May 20, 2009

I have created a virtual machine of a system running Fedora Core 4 and I need to upgrade it to Fedora Core 10. Based on what I have read, it iis possible so I started theupgrade process. I get an error message saying that /dev/hda6 (my root paritition does not exist) even though it does.

Does the installer need to read a label from /etc/fstab? I executed tune2fs -L / /dev/hda6 amd ,and added LABEL=/ for the corresponding entry for fstab. but the FEDORA CORE 10 is still giving the same problems for the installation process. Should I upgrade to an intermediate verson like Fedora Core 7 first?

View 14 Replies View Related

Fedora :: Install PHPUnit In Core 12?

Dec 20, 2010

I plan to install PHPUnit in Fedora Core 12 pc. But I cannot, I already use all YUM commands Regarding this.

View 2 Replies View Related

Fedora Installation :: Can't Install Core 10 Into XEN VM / Get It To Work?

Feb 8, 2009

When I am trying to install Fedora Core 10 into a XEN VM i get an error stating that images/xen directory does not exist on the DVD image.

View 2 Replies View Related

Fedora X86/64bit :: Install The BCM4727 On Core 13?

Oct 12, 2010

I am facing problem in installing/ configuring the Broad com wifi card (BCM4727) on fedora Core 13. how to install the BCM4727 on core 13. The os is 64 bit .

View 5 Replies View Related

Fedora :: Install An Ubuntu Package In Core?

Jan 9, 2010

I just bought a netbook that came with Ubuntu. I partitioned the drive so I can multiboot and have put Fedora Core 12 LXDE spin next to Ubuntu netbook edition. The netbook is System76 manufacturer and they have put all their drivers in a .deb package. How can I use this file in Fedora Core 12?

View 3 Replies View Related

Fedora :: Install Linux-ftpd-ssl 0.17 On Core 6?

Apr 28, 2010

How can I install linux-ftpd-ssl 0.17 on Fedora Core 6? Do I have to set any environment variables ? I downloaded the version from [URL] and tried to compile it but it is giving many errors.

View 3 Replies View Related

General :: Install Firefox (or Anything) On Fedora Core 2?

Jul 21, 2010

just did Red Hat Linux (Fedora Core 2) install. It's the only OC on the machine. Boots and everything seems to work just fine. Everything but the operator, that is!

I want to install FireFox and Thunderbird and AVG (free) antivirus so I first went to the Mozilla site for a download, only to discover that the best way to install is as part of a Package Manager.

Fair enough - but what is a package manager? Part of the distro? Where do I get one for these items?

UPDATE - I figured out the Package manager thing and no , FireFox is not an option, nor is Thunderbird or any antivirus.

If I can't get a package manager, the site tells me that I can install with me as the only user by downloading and typing in a couple of commands (Unzip and run, I think). But I get a report that I need a something or other file (library?) for it to run. How do I find that file and why would I be the only user? Surely as root I can set it up for all users can't I?

I guess the short(er) question is: How does a new user download and install a program onto a new setup without a package manager?

Question 2 - this install is for a class and the instructor wants screen prints as proof I'm doing certain operations. How do I get a screen print of, say, a history listing and can I save the screen print or view into a file for submission?

View 9 Replies View Related

Programming :: How To Install PHPUnit In Fedora Core 12

Dec 20, 2010

I plan to install PHPUnit in Fedora Core 12 pc. But I cannot, I already use all YUM commands Regarding this.

View 4 Replies View Related

Fedora Installation :: Cannot Install Core 10 Monitor Out Of Range?

Jan 15, 2009

I cannot install Fedora core 10. It boots up and it gets to the Fedora 10 loading screen. After that it complains my monitor is out of Range and that's as far as I can go. I had originally thought I could get to some text install mode, but I don't make it far enough to do that.

View 1 Replies View Related

Fedora :: What The Packages Needed To Install Tomcat5 Core Using Yum

May 10, 2011

Code:

yum search tomcat5
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_GB to language list
Matched: tomcat5
jakarta-commons-collections-tomcat5.i686 : Jakarta Commons Collection dependency
: for Tomcat5
struts-webapps-tomcat5.i686 : Sample struts webapps for tomcat5
tomcat5-jasper-javadoc.noarch : Javadoc generated documentation for

[Code]...

From the above what are the packages which should be installed to to get tomcat5 core installed?

View 1 Replies View Related

General :: Difference Between Fedora Core 4 And Fedora Core 14?

Jan 12, 2011

I am in school for my CIS degree and the book I am using this session covers Windows XP and Fedora Core 4. I am having trouble finding & downloading Fedora Core 4. My question is: Is there a big enough difference between Fedora Core 4 and Fedora Core 14 that I would not be able to use 14 instead of 4?

View 14 Replies View Related

Ubuntu :: USB HID Core Driver (slow After Trying Virtualbox 4)?

Sep 1, 2011

using 10.04.3 i have removed virtualbox 4 and return 3.1.6 it seems to have added ~5 seconds to my boot time (at least at the ubuntui plymouth splash screen) and i had it down to ~9 seconds before as a perfectionist it is getting under my nerves my guess it it left something to enable usb support in virtualbox here is part of my dmesg

Code:
[ 3.712963] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 3.714460] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 3.719702] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 3.722055] usbcore: registered new interface driver hiddev

[Code]...

View 2 Replies View Related

Fedora :: Input To Create New Username And Password - Install X86-64 Bit Core 12?

Dec 25, 2009

1. No any input to create new username and password when I install X86-64 bit Core 12 And I can not login with root. So how can I login Fedora core 12?

View 4 Replies View Related

Fedora Hardware :: Crashing On Install On Athlon 8 Core Processor

Jul 30, 2010

I am attempting to install a custom fedora build but it crashed, I then attempted the standard fedora build (.iso) burned on a CD and I got to the boot window but at some point following the colored lines going across the bottom of the screen it froze. symptom - monitor still on not hibernating, num key works caps lock doesn't , hard drive is spinning and so is CD drive. Has anyone had issue loading this build onto similar hardware?

View 1 Replies View Related

OpenSUSE Install :: Add Fedora Core 11 To Suse's Grub Menu?

Jul 27, 2010

adding Fedora Core 11 to opensuse's GRUB menu so that I can boot FC11 from it. Here's what fdisk -l shows:

Device Boot Start End Blocks Id System
/dev/sda1 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.

[code]......

View 2 Replies View Related

Fedora Hardware :: Install Modem Sierra Wireless AC775 On Core 6?

Apr 26, 2010

how to install the modem Sierra Wireless AC775 on Fedora Core 6. Fedora 6 detects the modem, but does not establish it as a device. And no entries in the directory /dev about modem. Startup Fedora 6 said that the initialization eth1 failed because no device serial_cs.

View 3 Replies View Related

OpenSUSE Hardware :: Driver For Intel Core I3 Integrated Graphics?

Nov 25, 2010

As this seems not yet to be covered in openSUSE Graphic Card Practical Theory Guide for Users I am asking here.

The Motherboard is an Asus P7H55-M Pro with Intel Core i3 530@2.93GHz. openSUSE 11.3 assigns the i915 driver by default:

Code:
# lspci -vk
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 8383
Flags: bus master, fast devsel, latency 0, IRQ 30
code....

View 9 Replies View Related

Networking :: Install Broad Band Wireless Modem (netgear)ADSL2 On Fedora Core 7

Jul 29, 2010

how to install broad band wireless modem (netgear)ADSL2 on Fedora core 7

View 2 Replies View Related

Ubuntu :: Update Of Libc And Xorg Core Kills Ati Hardware Driver

May 26, 2010

I got the weekly updates; libc files and an xorg core file from memory. Thinking now the xorg core possibly rewrote my xorg.conf!seems to have killed the restricted ATI driver. I can boot from kernel 2.6.24.26 but 27, the one I did the updates, after the Ubuntu progress bar I get a black screen. Booting from 26 I get the low resolution graphics guff and need to set it manually each time. Go to Sys->Admin->Hardware Drivers, and sure enough, the ATI driver is 'Not in Use'. Switch it on, try booting into 27, black screen.

Phew, back to 26, change to manual config, get back in, see ATI driver is off again, leave it off and leave manual graphics resolution and config, boot back into 27, everything is stretched and out of proportion!! But I can at least get in. Switch ATI driver on in there, reboot into 27, black screen.This is pretty urgent as my wife is end of semester uni stuff and needs this machine. Worse, so am I and have even more on the plate (but at least have a computer!),

View 4 Replies View Related

Ubuntu :: Run Dual Core - Crash - Single Core Runs Perfect

Apr 1, 2011

i am running gigabyte GA-M68M-S2P and AMD sempron 2.7. the problem is when i try to run dual core. it will boot and run for 2mins then it crashes. single core runs perfect.

View 6 Replies View Related

OpenSUSE :: Get Application To Utilize More Than One Core In Multi-core Setup?

Mar 27, 2011

I have a command line OCR program called OCR Shop XTR (Vividata corp) that I am using on a system with a 6-core AMD chip. I changed the bios so that the 6-cores were activated, but htop shows me that while the program is running, I am only getting activity on one core (the program maxes out the one core with consistent usage between 97% and 100%).

I have read that many programs are not written to take advantage of multiple core cpu's. However, I am just hoping that there is some way to get this program to take advantage of the extra cores. Does anyone know of a way to invoke programs from the command line which would spread the workload out among additional cores?

Here is the output of uname -a:Linux linux 2.6.37.1-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 i686 athlon i386 GNU/LinuxAnd here is the output for one of the cores from cat /proc/cpuinfo:processor : 5

vendor_id : AuthenticAMD
cpu family : 16
model : 10
model name : AMD Phenom(tm) II X6 1100T Processor
stepping : 0

[Code].....

View 5 Replies View Related

Ubuntu Installation :: Dual Core Support Core 2 E8500 Out Of Box?

Feb 14, 2010

Just a quick question. Does Kubuntu Karmic support core 2 E8500 out of the box or do you need the SMP kernel?

View 3 Replies View Related

Programming :: Multi-core Support - Control On What Core Will A Thread Run

Oct 31, 2010

Is there any Linux API that will let me control on what core will a thread run? If not, do I have to use assembly language?

View 2 Replies View Related

Fedora :: Installed Bless Hex Editor On 14 Laptop - Shows "mono-core Wants To Install A Font Language Code Not Matched: Utf-8"

Feb 22, 2011

i have installed bless hex editor on my fedora 14 laptop.However when i open it ,it shows "mono-core wants to install a font language code not matched: utf-8" i am not able to use bless hex editor properly.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved