CentOS 5 :: System Locks Up During Boot While Trying To Load First-run Configuration?
Aug 10, 2010
I just installed CentOS 5.5 on my machine and the installation appeared to complete successfully (it said it was successful). When I rebooted and tried to get into my new CentOS, my system completely locked up during the startup. According to the progress bar, it got stuck on the first-run configuration. I have not yet been able to boot into the OS. I am attempting to create a dual-boot system. I already have Windows XP installed on a separate hard drive. The GRUB loader works fine and I can choose either OS to boot into, it's just the CentOS won't finish booting. Windows is completely unaffected.Since I'm assuming the problem stems from the installation, I'll list the steps I followed.
1. Obtained the .iso image from a network drive at work (I am installing on my work machine). The image is dated May 17, 2010.
2. Burned the image to a DVD.
3. Booted from the DVD and chose to install using the graphical interface.
4. Checked the DVD. The installer verified that CentOS could be installed from it.
5. Picked my installation and keyboard languages.
6. Chose to create a custom layout for my partitions. On my second hard drive, I created the following partitions:
- Swap (8196MB, twice my system RAM)
- ext3 (100MB, mounted to /boot)
- ext3 (remaining drive space, mounted to /)
7. Picked my timezone (did not use UTC since Windows will handle setting the system time)
8. Set my root password. You don't get to know ;)
9. Did not choose to install any additional packages besides the KDE desktop. I wasn't sure what I'd need so I checked the option to customize later.
10. The installation than started and 15 minutes later, it told me it had succeeded and to remove the DVD and reboot.
11. Upon rebooting, I let the GRUB loader boot into CentOS (side note, I'd prefer if Windows was the default OS but that's something I should be able to Google on my own).
12. The startup looks like it's going fine until it gets to the first-run configuration, at which point the entire system locks up and requires a hard reboot. I've tried several times since and it always locks up at the same point.
View 6 Replies
ADVERTISEMENT
Dec 12, 2010
This laptop that I am trying to get Debian 5 working on is occasionally locking up during boot at "Activating Swap..." WTF could cause such a bizarre thing? The swap partition is just empty space. Activating must be nothing more than confirming it exists and mounting it.
View 3 Replies
View Related
Mar 28, 2009
I am trying to install CentOS 5.2 on an HP rp5700 desktop unit. These units were originally sold as a Point of Sales unit I believe, but HP also markets it as a high life cycle server for SMB market.I tried to load CentOS on this unit via CD (created from downloaded ISO of course). It presents the initial CentOS banner page and waits for the obligatory "enter" to continue. It begins the boot process up to discovering the PCI stuff and just locks up, no response. I have to power down to restart.Since this does not even get to the point of installing. I am at a loss what to do next. Has anyone had a similar issue with other PCs.The boot stops at the lineACPI: PCI Root Bridge [PCI0] (0000:00)
View 3 Replies
View Related
Feb 22, 2011
Ive installed centos freebsd and mandriva but i want to manage grub from my centos and y create successfully a boot load for freebds. But for mandriva it just doesnt work... so how can a create a boot load entry for mandriva from grub centos?
View 1 Replies
View Related
Nov 22, 2010
I have installed splashy from sid. Rest of the system is squeeze, and put the parameter "vga=791 splash quiet" in the kernel parameter...
Unfortunately this is not working properly. It does load the splash image as intended, but it then just hangs here, and does not load the OS unless I press enter. (I asume that something is hangning, but I cannot see the shell from here, and ctrl+f2-f6 is not working so I cannot get to any tty).
Then after boot, I can only see the / partition. But not /home. Duing a fdisk -l shows up the partitions, so they are there, just not mounted at boot?
If I press F2 at boot, before the image shows up, it does actually boot without any issues at all. It must be something with the image loading that is causing this.
View 3 Replies
View Related
Nov 27, 2010
This last time i managed to get it to install but it starts to load and the little Fedora hourglass fills up to the top and then it hard locks the machine. So.. I trashed the install and but ubuntu on.. but i wanted to give it another go, this time downloading the live CD rather then the DVD and see if i have better luck with it. My system is:
I7 920 with ASUS Mainboard :Asus P6T DELUXE V2
Physical Memory :12288MB (6 x 2048 DDR3-SDRAM )
Hard Disk :Seagate ST95005620AS (500GB) (clean drive not raid)
Video Card 1 :NVIDIA GeForce GTX 285
Video Card 2 :NVIDIA GeForce GTX 285
I have no logs at this time since, i wiped the original install out, i am just finishing out the download of the live CD and will try again. The qustion is is something i have an ovious issue, like the 2 video cards or something incompatable etc?
View 2 Replies
View Related
Dec 2, 2009
I have a Fedora 12 system that I am trying to configure with 3 IP addresses on one NIC card. I created scripts for each of the connections I want in /etc/sysconfig/network-scripts/ and they are called ifcfg-eth0, ifcfg-eth0:1, ifcfg-eth0:2. If I run /sbin/services network restart it configures everything as I would like. When I restart the computer the only device configured is eth0 and it is set to DHCP. If I run the script again everything works. What am I missing to make this change persistent?
View 2 Replies
View Related
Oct 20, 2010
Our CentOS 5.5 server has an intermittent problem where kswapd0 begins using 100% CPU, driving the system load to 20-30 and higher, and eventually crashes the server. The problem seems to be triggered by an intensive Java process (Lucene indexing), but only once every month or two. Lucene reindexing normally runs every 15 minutes without a problem. When the problem happens, there is still plenty of free RAM (as measured by /usr/bin/free's "buffers/cache" value, which is 1.5GB) and free swap space. The server is running MediaWiki 1.15 with the standard CentOS Apache, PHP, MySQL. My intuition is that this is a kernel/swapper bug.
Kernel info:
$ uname -a
Linux myhost 2.6.18-194.11.1.el5 #1 SMP Tue Aug 10 19:05:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
Memory info:
Normal memory usage:
$ free
total used free shared buffers cached
Mem: 3090688 2769932 320756 0 258416 1531780
-/+ buffers/cache: 979736 2110952
Swap: 2097144 8212 2088932
Memory usage 30 seconds before a crash:
$ free
total used free shared buffers cached
Mem: 3090688 3050764 39924 0 113772 1309972
-/+ buffers/cache: 1627020 1463668
Swap: 2097144 179480 1917664
View 7 Replies
View Related
Oct 16, 2010
I want to upgrade to 11.3 but save my desktop and settings from 11.0. How can I do that?
View 3 Replies
View Related
Apr 28, 2011
My computer(win xp) crashed. When I turn it on I get the flickering line. If I press F2 while the BIOS is loading I can access the BIOS setup, but no operating system will load. I am not very familiar with BIOS. I put a cd in the cd drive that contained the latest download of Ubuntu and told it to reboot. Nothing happened. Setup says my CD-drive is set to a secondary drive. I looked in the CD files and I saw the windows installer (wubi). Is there a way I can boot linux?
View 13 Replies
View Related
Mar 20, 2011
I'm trying to install OpenSUSE 11.4 (64bit with the server options included) on my Mac (Core 2 Duo 2.0 Ghz with 2 GB memory). So I have sda2 the OSX, sda1 swap, sda3 is the bootcamp (windows), sda4 (ext4) and sda5(ext5). I installed rEFIt 0.14 first, then I reboot with DVD on. The installation setup resized the Windows partition from Bootcamp, and create 3 other partitions (the sda1,4 and 5). At the installation I choos MBR enable and "/" as home enable.
At the end of the installation I have the error about MBR, that can't mount, or create the mount point? I'll double check the exact message. Anyway, when I try to load OpenSUSE, is not working: can not load the system. I tried to find on the installation menu a repair (I thought that I can find an utility to fix the MBR). I don't want to choose other distribution, because I used SuSE before, and I really like it, and of course this way I can learn more about troubleshooting a Linux installation on different environment
View 9 Replies
View Related
Aug 16, 2011
I'm wondering where the services order is read from during boot. For some reason the system trys to mount my NFS files BEFORE it starts networking. This results in log delays during the boot process.
View 3 Replies
View Related
May 2, 2010
I have upgraded to ubuntu 10.04 but now can't boot into win vista, ubuntu and vista are on grub but vista will not load, I have tried sudo upgrade-grub which seemed to work but had no effect on loading windows. I did think of using win dvd to fixmbr but only as last resort, I entered the commands suggested by nitstorm and got "command not found". Followed link to source forge.net and test disk, followed the instructions to install and run test disk which repaired the boot sector in the vista partition, I can now choose to boot into win or ubuntu.
View 6 Replies
View Related
Jun 30, 2011
I just upgraded to F15 and it went well. But at the next and each subsequent cold boot the BIOS reports "Your system last boot fail or post interrupted Please enter setup to load default and reboot". The board is an asus P5N-D. I press F1 to blow past the error and all is well until the next cold boot. Restarts are fine, no errors at all.
View 12 Replies
View Related
Apr 29, 2011
Is it possible to install GRUB in the MBR of the only bootable disk in the system, but load configuration and images from another disk?Basically I want to install GRUB on /dev/sda, but menu and images will be under /dev/sdb2.Note: /dev/sdb is not bootable.
View 14 Replies
View Related
Jul 19, 2010
I am trying to setup a ventrilo server. I want it to load the server automatically on system boot so it is running at all times. I have downloaded the server files and can manually start it, but I do not know where/how to make it start automatically.
View 1 Replies
View Related
Jun 2, 2009
I'm running into a strange problem trying to change the service load or boot order on my CentOS 5.3 box.
The service in question is shorewall. When I go to my /etc/rc.d/rc5.d/, I notice that shorewall is listed a S27shorewall. I need it to start much later. So I run a simple command "mv S27shorewall S99shorewall"
I then restart the server. But after the reboot, something has reset it back to S27shorewall.
For those of you who like the background story: I need to change it to S99shorewall, because I need shorewall to start AFTER xend does all its stuff, as xend messes around with the underlying networking of the computer. The xend stuff was at S98 and S99...but I was able to successfully rename them back to S97 and S98, and the rename stuck. I've also renamed other service orders. Those stick. The only one that gets reset is shorewall, always back to S27. I have no clue how to tell what is causing the resetting...
View 1 Replies
View Related
Mar 6, 2009
How do I set my centos system to the configuration it had directly after the installation? Because there are so many messed up tings on here right now, firefox will only work with my proxy server if I put its IP directly into firefox but not if I put its IP into the system proxy settings and then point firefox at that. httpd refuses to serve up any kind of documen apart from the test page randomly and even then I sometimes get a 403 error. Seriously is this the normal practice for setting up a LAMP server???
View 7 Replies
View Related
Feb 19, 2010
whenever i try to burn mp3 from a disk in the cdrom, the system will freeze up solid, keyboard, screen, mouse, the whole shebang. ubuntu will see an audio disk in the cdrom, and i can play some tracks off it (sometimes), but trying to copy it to mp3s will crash everything after about 2-3 minutes. somewhere between tracks 2 - 4. anyone else have issues? i have tried a different cdrom, and cables... and i hate to say it but it works under windows.
View 8 Replies
View Related
Feb 2, 2011
I just installed Ubuntu 10.04 on my old Toshiba Satellite laptop. I'm dual booting with another Linux distro - ZenMini Everything works O.K. running Ubuntu but I can't restart the system with out it locking up. I have to power down completely from Ubuntu. I don't have any problem restarting with ZenMini so its obviously an Ubuntu problem.
View 3 Replies
View Related
Nov 28, 2010
I am having problems with suse 11.3 after upgrade. system locks, so would like to know what logs to start looking into for clues as to what is going on.
View 3 Replies
View Related
Jan 26, 2011
have all ways been hiding in the background read not say a thinglets start well i look after 2 dell poweredge 2650 with 12 gig ram installed servers has been running fine onwell i though it was time to upgrade to 5 all went fine till reboot Memory for crash kernel (0x to 0x) not within permissible range ! well what i have been reading this is the norm for now What is mean by ignore it? LoLwell so i did the system keeps boot till i get to this linesbin/mingetty: /sbin/mingetty: cannot execute binary file alot, and it shows. INIT: Id "5" respawning too fast: disabled for 5 minutes ...so maybe its a memory issue so took 8 gig out left 4 in the system now it reboot alls good with only 4 gig of ram installed so is there a way to fix it to use all the ram can i get the system boot on 4 gig and then add the 8gig later on
View 7 Replies
View Related
Aug 31, 2009
We have 2 applications set as S96 and S98 at rc3.d and rc5.d simultaneously. Both applications create a system V shared memory segment by calling shmget.If the system boot at runlevel 5, both applications can obtain their shared memory segment id correctly, i.e. 98305 and 131074 individually. While there is a root owned segment id 32768 takes first seat on the list. This is the id list:
root, 32768
S96_app, 98305
S98_app, 131074
[code]....
View 1 Replies
View Related
Jun 16, 2011
Suspend / hibernate locks up my system.
View 4 Replies
View Related
Feb 12, 2010
At first I thought this was a scanner problem, but I've found that if I'm using the mouse while I'm scanning or sometimes just flipping back and forth with my usb kvm the keyboard and mouse become useless. If I'm scanning while I use the mouse, the system locks up. Here is what I'm seeing in /var/log/messages.
After executing xsane:
Feb 12 11:10:41 bnmlinux xsane: io/hpmud/musb.c 1987: invalid usb_open: Permission deniedFeb 12 11:10:41 bnmlinux xsane: io/hpmud/musb.c 1987: invalid usb_open: Permission deniedFeb 12 11:10:41 bnmlinux xsane: io/hpmud/musb.c 1987: invalid usb_open: Permissi
on deniedFeb 12 11:10:41 bnmlinux xsane: io/hpmud/musb.c 1987: invalid usb_open: Permissi
[code]....
View 6 Replies
View Related
Mar 5, 2011
Using Ubuntu 10.04 or 10.10, have a router. Whether connected via ethernet or wifi, I'm experiencing a problem downloading files. Trying to download a linuxmint iso , my laptop will freeze up after 5 or 10 min. I have plenty of disk space, and screensaver off. I've googled quite a bit and can't get a clue. My desktop will freeze up too. I can't imagine what would cause this.
View 1 Replies
View Related
Nov 2, 2010
I installed Win7 after Ubuntu (10.10). I attempted to reload grub so that I would be able to run them dual boot and now I can't load anything.
I followed the guide here: [url] and went threw it a couple of times now to make sure it wasn't user error.
I am using a live cd from 10.04 because it's the only one I have. Any chance that's why it isn't working properly? I wouldn't think so, but I assume that it's possible.
If that is the case; Any way to solve it without using the live cd? I cannot burn a new disk because I have to boot from disk to use my computer right now.
I just get a flashing cursor on a blank screen when I try to load.
View 9 Replies
View Related
May 16, 2010
Still having problems with the locked black screen freezing a couple of minutes in. I've done everything anyone has recommended on the other threads but nothing and it is driving me crazy. Please, does anyone have any ideas? I tried to install xfce4 but of course, screen froze and went black before I could fully download the software! I've tried the nomodeset but can't save it before doing a reboot (then went via terminal as quick as I could on start up to edit grub, but then... yes, it fell over and froze before I could hit save). So I'm giving this a lot of time I really don't have... such a shame I upgraded, 9.10 was working so well... alternatively,
View 1 Replies
View Related
Jun 9, 2010
System spec:
Core 2 Quad, Q6600, 2.4GHz OC'd to 3GHz
Asus Rampage Formula m/b
2x WD RE2 500GB HDDs ("linux boot" and "winxp boot")
1x Seagate Barracuda HDD ("boneyard")
4GB DDR2-800 RAM
Ubuntu 10.04 LTS
I'm having a really annoying problem with disc activity on my desktop system. Basically, if anything is writing a large amount of data to the hard drive (say, 10MB or over), the machine basically freezes solid. The mouse goes jittery (you move it and it takes a second then moves in one big leap).
For instance, if I try to image a USB hard drive to a file:
# dd if=/dev/sdh of=usbdrive_dump bs=1G
Effectively this works in two portions: it reads 1GB of data to RAM, then blats it out into a file. The machine is perfectly responsive while the USB drive is getting thrashed, but locks solid when the internal SATA drives are in use. Writing to USB HDDs doesn't seem to have the same effect -- I can copy 1GB files to/from them all day long and the machine is perfectly happy.
View 2 Replies
View Related
Jun 5, 2011
I noticed that sometimes my Linux server will randomly start to lag really badly, to the point where even a http request takes forever. It is an Intel Core2Quad with 8GB of ram running FC9. This is my "Everything" server so it does file, email, DNS, web (for local stuff only), VMs and so on. There are about 5-6 VMs running on it at any given time. I manage it through a VNC session and have some SSH consoles within that session. This way if I reboot my PC I don't lose all my SSH consoles. If I need to SSH to any server I do it from there. I treat it kinda like a terminal server to some extent.
When this slowdown happens, top is not really useful because I also do F@H so that will always be to the top, but it's low priority. The VMs are also always near the top. This does not change whether it's slow or not, so when it's slow, I have nothing to go by on how to troubleshoot. The load does seem to skyrocket though. Right now it's doing the slowdown thing and it's at 8.09. Normally it's at around 3 which imo is good as it it's under 4. I have 4 cores so anything more than 4 means it's queuing. At least that's how I understand it. This is the output of top:
Code:
[root@borg ~]#
[root@borg ~]#
[code]....
View 9 Replies
View Related
