Ubuntu Installation :: System Locks Up After Running For A Few Minutes?
May 16, 2010
Still having problems with the locked black screen freezing a couple of minutes in. I've done everything anyone has recommended on the other threads but nothing and it is driving me crazy. Please, does anyone have any ideas? I tried to install xfce4 but of course, screen froze and went black before I could fully download the software! I've tried the nomodeset but can't save it before doing a reboot (then went via terminal as quick as I could on start up to edit grub, but then... yes, it fell over and froze before I could hit save). So I'm giving this a lot of time I really don't have... such a shame I upgraded, 9.10 was working so well... alternatively,
I have to type this quick because Ubuntu will lock up on me.The screen goes black, the cursor does NOT move, and the only way to recover is to do a hard reboot. This happened when I had windows XP installed as well, only it would reboot the machine after 5 minutes.I barely have time to open one program and it locks up.Could this be a hardware issue?I tried taking out the video card I had bought, thinking it would solve the problem, but it does not.
I've upgraded to 10.04 I have had a few small problems, for one, when the desktop locks after the predetermined 10 minutes or so, upon reconnection my mouse no longer works. This is a laptop and I use a usb mouse now, which occasionally will not work unless a unplug and replug. Secondly, when the desktop locks it disconnects the network, never used to do that.
when I move the mouse to the top left it shows the 4 desktops. But I have switched it to 2 desktops, plus I also undid the screen edge section in personnel settings. How do I turn this ANNOYING feature off, as I have the tradition menu there & makes life difficult. It locks the desktop to reenter the password after 5 minutes. I turned the screen-saver off & unchecked the lock desktop setting in there also. I tried to search for these, but ever time I did it would tell me it was to generic of a search.
I'm trying to perform an install of F14 (fresh install over F13), and it has been showing "running post-installation scripts" for 1 1/2 hours now. I am wondering if this is unusual and what the implications might be of power-cycling and rebooting. I'd note this is a fairly fast machine with 2 quad-core Xeons (I forget their model number).
I recently purchased a Quadro FX 4800 and tried to install it on Fedora 10. During the installation, Fedora didn't recognize my new graphics card and began installing the OS in text mode. I stopped the installation and tried to start over, this time I passed the following command: linux resolution=1024x768. I then proceeded with the installation, and again, I was posed with a text mode installation. I continued with the text mode install and when Fedora was done installing, I rebooted and system just locked up.
At this point I was frustrated, so I reinstalled my old 8800 graphics card and started a new install with something that worked in the past. When the install was done, I loaded the latest NVIDIA drivers and the rebooted. I reinstalled my new graphics card (Quadro FX 4800) then powered up my system. I thought everything was good to go and all of a sudden my system flickered and then locked up during the 'Anacron' testing phase. I then rebooted with the "Ctrl+Alt+Del" hotkeys, but my system always locks up during the 'Anacron' testing sequence. I am aware that the Quadro FX 4800 is a few months old, but how can I get it to work in linux? It has gotten so bad, that I had to resort to using MS Vista.
System specs: Intel Core Duo Quad Core 4 gigs DDR2 SATA RAID 0 Mobo: 680i SLI 800WATT Power Supply
I'm running 10.04 and when my screen locks I can't unlock it. I enter my password and it checks my password forever. This is a recent problem. I don't know what's causing it.
whenever i try to burn mp3 from a disk in the cdrom, the system will freeze up solid, keyboard, screen, mouse, the whole shebang. ubuntu will see an audio disk in the cdrom, and i can play some tracks off it (sometimes), but trying to copy it to mp3s will crash everything after about 2-3 minutes. somewhere between tracks 2 - 4. anyone else have issues? i have tried a different cdrom, and cables... and i hate to say it but it works under windows.
I just installed Ubuntu 10.04 on my old Toshiba Satellite laptop. I'm dual booting with another Linux distro - ZenMini Everything works O.K. running Ubuntu but I can't restart the system with out it locking up. I have to power down completely from Ubuntu. I don't have any problem restarting with ZenMini so its obviously an Ubuntu problem.
I'm running a pretty heavy-weight process (Rails tests) that involves several worker processes, in an effort to parallelize the runs. To measure the performance impacts, I run hdparm -T /dev/sda to give me the cached read performance. Note that the disk IO is not being measured, but the disk cache IO is. It works very well on my work machine (8-core Mac Pro running Ubuntu with 8GB of RAM).
The baseline is: honk4:~ $ sudo hdparm -T /dev/sda /dev/sda: Timing cached reads: 13224 MB in 2.00 seconds = 6616.86 MB/sec In the middle of the test run: honk4:~ $ sudo hdparm -T /dev/sda
Using Ubuntu 10.04 or 10.10, have a router. Whether connected via ethernet or wifi, I'm experiencing a problem downloading files. Trying to download a linuxmint iso , my laptop will freeze up after 5 or 10 min. I have plenty of disk space, and screensaver off. I've googled quite a bit and can't get a clue. My desktop will freeze up too. I can't imagine what would cause this.
I am planning on running a script once every five minutes, and the syntax that comes to mind in doing this is the following:
Code: 5 10 15 20 25 30 35 40 45 50 55 * * * * /apps/<script>.pl Is there a better syntax to use to accomplish this task, or is the above example the way to go?
Core 2 Quad, Q6600, 2.4GHz OC'd to 3GHz Asus Rampage Formula m/b 2x WD RE2 500GB HDDs ("linux boot" and "winxp boot") 1x Seagate Barracuda HDD ("boneyard") 4GB DDR2-800 RAM Ubuntu 10.04 LTS
I'm having a really annoying problem with disc activity on my desktop system. Basically, if anything is writing a large amount of data to the hard drive (say, 10MB or over), the machine basically freezes solid. The mouse goes jittery (you move it and it takes a second then moves in one big leap).
For instance, if I try to image a USB hard drive to a file:
# dd if=/dev/sdh of=usbdrive_dump bs=1G
Effectively this works in two portions: it reads 1GB of data to RAM, then blats it out into a file. The machine is perfectly responsive while the USB drive is getting thrashed, but locks solid when the internal SATA drives are in use. Writing to USB HDDs doesn't seem to have the same effect -- I can copy 1GB files to/from them all day long and the machine is perfectly happy.
I am having problems with suse 11.3 after upgrade. system locks, so would like to know what logs to start looking into for clues as to what is going on.
At first I thought this was a scanner problem, but I've found that if I'm using the mouse while I'm scanning or sometimes just flipping back and forth with my usb kvm the keyboard and mouse become useless. If I'm scanning while I use the mouse, the system locks up. Here is what I'm seeing in /var/log/messages.
Previously I had posted a question on how to make it run every 7 minutes between 7 and and 11pm.However now I found out what I really need is every 7 minuted between 7:30 and 11pm BUT it has to be every 7 minutes, it cannot reset itself on the top of every hour, so the */7 wont work.How can it that it will be every 7 minutes, so it will go at 7:30, 37,44,51, 58, 8:05, etc..
The culprit is a Toshiba Samsung Storage Technology 222A CD/DVD RW drive, aka SH-S222A, sold under the Samsung brand. It occasionally locks up my entire system when I'm ripping an audio CD to a *.toc/*bin image with Brasero. I've had this happen with several different audio CDs, while ripping discs using both Imgburn under Windows XP and Brasero under Ubuntu 10.04. The display freezes completely, the mouse cursor doesn't move, and I can't get any response to keyboard input. Any sounds playing loop endlessly, repeating the last 0.5 sec or so before the cursor freeze. Meanwhile, the hard drive activity light stays on, but the optical drive light does not. I've let the system sit this way for several minutes, with no sign of change. To recover, I must press the system reset button.
I ripped the same discs without incident, using my other optical drive. It is a different brand, Lite-On, but otherwise similar to the Samsung drive: PATA interface, CD/DVD RW, etc. Anyone else have the Samsung SH-S222A? I'm wondering whether there is a bug in the drive's firmware, or I just have a defective drive. It works for other things. I can play audio CDs, access CD-ROMs, and rip audio CDs to individual tracks (rather than a disc image). I can also rip DVDs. Is there some way to recover my system when it locks up from drive misbehavior? I haven't found a way so far. I'm surprised that Ubuntu can be incapacitated so easily.
The SH-S222A has the most recent firmware revision, SB01. I tried to install the newer ID01 firmware from Samsung's website, but got a message that the installer couldn't find a "suitable" drive. I take that to mean that the ID01 firmware is meant for a slightly different variant of the -S222A, perhaps one only sold overseas. Yep, that's pretty much it. My drive's customer code is BEBE. Firmware ID01 is for drives with a different customer code.
This laptop that I am trying to get Debian 5 working on is occasionally locking up during boot at "Activating Swap..." WTF could cause such a bizarre thing? The swap partition is just empty space. Activating must be nothing more than confirming it exists and mounting it.
I noticed that sometimes my Linux server will randomly start to lag really badly, to the point where even a http request takes forever. It is an Intel Core2Quad with 8GB of ram running FC9. This is my "Everything" server so it does file, email, DNS, web (for local stuff only), VMs and so on. There are about 5-6 VMs running on it at any given time. I manage it through a VNC session and have some SSH consoles within that session. This way if I reboot my PC I don't lose all my SSH consoles. If I need to SSH to any server I do it from there. I treat it kinda like a terminal server to some extent.
When this slowdown happens, top is not really useful because I also do F@H so that will always be to the top, but it's low priority. The VMs are also always near the top. This does not change whether it's slow or not, so when it's slow, I have nothing to go by on how to troubleshoot. The load does seem to skyrocket though. Right now it's doing the slowdown thing and it's at 8.09. Normally it's at around 3 which imo is good as it it's under 4. I have 4 cores so anything more than 4 means it's queuing. At least that's how I understand it. This is the output of top:
I just installed CentOS 5.5 on my machine and the installation appeared to complete successfully (it said it was successful). When I rebooted and tried to get into my new CentOS, my system completely locked up during the startup. According to the progress bar, it got stuck on the first-run configuration. I have not yet been able to boot into the OS. I am attempting to create a dual-boot system. I already have Windows XP installed on a separate hard drive. The GRUB loader works fine and I can choose either OS to boot into, it's just the CentOS won't finish booting. Windows is completely unaffected.Since I'm assuming the problem stems from the installation, I'll list the steps I followed.
1. Obtained the .iso image from a network drive at work (I am installing on my work machine). The image is dated May 17, 2010.
2. Burned the image to a DVD.
3. Booted from the DVD and chose to install using the graphical interface.
4. Checked the DVD. The installer verified that CentOS could be installed from it.
5. Picked my installation and keyboard languages.
6. Chose to create a custom layout for my partitions. On my second hard drive, I created the following partitions:
- Swap (8196MB, twice my system RAM) - ext3 (100MB, mounted to /boot) - ext3 (remaining drive space, mounted to /)
7. Picked my timezone (did not use UTC since Windows will handle setting the system time)
8. Set my root password. You don't get to know ;)
9. Did not choose to install any additional packages besides the KDE desktop. I wasn't sure what I'd need so I checked the option to customize later.
10. The installation than started and 15 minutes later, it told me it had succeeded and to remove the DVD and reboot.
11. Upon rebooting, I let the GRUB loader boot into CentOS (side note, I'd prefer if Windows was the default OS but that's something I should be able to Google on my own).
12. The startup looks like it's going fine until it gets to the first-run configuration, at which point the entire system locks up and requires a hard reboot. I've tried several times since and it always locks up at the same point.
I upgraded to F13 this week. And autologin just sits with autologin present, but I have to click the autologin (rather than a user name) and then click again to actually login. That's not so "auto" anymore if I can't push the power button and come back in x minutes with everything and running.
I had this in my /etc/gdm/custom.conf TimedLoginEnable=true TimedLogin=marty TimedLoginDelay=8 What changed and what do I need to do now to get autologin to get off it's ass and log me in?
I am using ubuntu 10.4 on a Sony vaio and I never had troubles with the previous versions.just in those days something strange is happening. With no apparent reason, few applications running, the system will just freeze...sometimes I would be able to open a further application, some other things not. I have tried everything (in my knowledge)after which I simply use Alt F2, call the terminal and reboot (the only operation that the system will allow me to do.I have found no pattern of behaviour but his has happened with the following application running
Firefox, Openoffice and Rhythmbox Firefox and Torrent
now Firefox alone (yes it might be firefox...but still, if I am not wrong it happened also when firefox was shut and I was working on openoffice)now I have logged on into xfce environment to write this message (and I am using Midori as browser)..
10.04 Ubuntu / Gnome My system has just started crashing back to the Gnome login screen. Tried removing recently installed packages, as well as the repair broken packages from login screen.
if my PC lags a bit it crashes!But I wouldn't think it would be an ordinary crash.Earlier today I installed Xubuntu 10.04onto my PC. Well, The installation was smooth and I was able to get it installed. Then all of a sudden when I was looking aroundmy PC got caught in a little lag.. And when it lagged this black screen came up and it said
"Starting Common Unix System; cupsd [ OK ] " "Checking Battery State [ OK ] "
Then That screen disappears and these Straight gray bars come up and they cover the top of my screenAnd they just blink! I figured it might be a glitch so I went to go eat dinner.About 20-30 minutes later I come back and there still blinking.I tryed rebooting the system and trying again and it got cought in a little lag and the
"Starting Common Unix System; cupsd [ OK ] " "Checking Battery State [ OK ] "
Came back up and it disappeared again and the bars came back!I tried reinstalling Xubuntu 10.04 but it came out the same result.I tried updating the system cause when I installed it it said I had 164 updates waiting.
_PC INFO_ Dell Dimension 2300 with Xubuntu 10.04 as the operating system 256mbs of RAM
I'm running low on disk space on my 10.04 server install. I'm running my normal partitioning without any lvm.
Is there a way I can create a new lvm set from my /home which is almost full and a new hdd to expand space just on that partition without killing everything on it?
I spent some time on this issue and I just wanted to share a resolution that was difficult to find (at least for me).Yum was working fine for me for a long time on my Fedora 12 installation x64, when suddenly it stopped during transaction checks. It didn't matter which package I was installing, or if I performed an update or anything. Always in the same place, and it always required a kill -9 to stop the process. Even with debugging turned on in yum (-d 10 -e 10 --rpmverbosity=10) it would not display an error...just hang during the transaction check. I tried the following to no avail:
Still, it would lock after the transaction test. The only thing that solved my issue was running:
Code: # strace yum -y update This showed me that I had a stale NFS mount that was in a hung state. I tried umount but it just showed that the device was busy and would not unmount. The only way to fix it was to perform:
Code: # umount -l /mnt/data which allowed the stale mount to be removed. Once that was cleaned up, everything worked. I struggled with this because there were no debugging messages, and I had no idea the transaction check would go through all of my mounted drives. However I just wanted others to know about this, because it was a rare issue, and I had trouble finding the solution.
I've got a Puppy system running version 4.3.0 that I'm trying to get on the home network. I'm using a D-Link DWA-130 (H/W revision C), which has a Realtek RTL8192U chipset. I got the drivers off of D-Link's website, and they compiled and installed just fine, but when either a) I try to connect to the network, or b) while I'm browsing the web, the system locks up completely. No mouse, no keyboard, no Ctrl-Alt-Bksp to get out of X, nothing.
I'll outline my steps: Install Puppy using a "Full" HDD install (not "Frugal"). Copy the "devx_430.sfs" file (which I got from the Puppy website) from a thumb drive to the "my-documents" folder (although the exact location proabably doesn't matter). Mount it, cd to the mounted directory and execute "cp -a --remove-destination ./* /" and "sync". Copy the kernel source for 2.6.30.5 ("kernel_src-2.6.30.5-patched.sfs4.sfs") to the same directory. Mount it and execute the same commands as before. Copy the folder containing the RTL8192U drivers ("rtl8192u_linux_2.6.0006.1031.2008") to the root directory (i.e. "/"). cd to the folder in the terminal and run "make", "make install".Reboot the machine. Set up networking using the Puppy Internet Connection Wizard. HERE'S WHERE IT SCREWS UP: It connects, but after a while (e.g. just after logging into LQ through it, as a test) it freezes the entire system.
I have to do a hard reboot ("panic button"), then a soft reboot (for some odd reason the usb module won't load after a hard reboot, so the mouse won't work) to get the system working again, only to have it lock up again once it connects to the network.
Are these drivers broken? Outdated? Is there anything I can do to fix this? EDIT: I should add that this only occurs when the adapter is plugged in. If I boot the system with it unplugged, it works fine (probably because it never loads the kernel module).
Rather than booting into a CD, or rebooting into a partition, or rebooting at all or clobbering my MBR or installing GRUB, I would like to install Ubuntu into an existing partition from an already running Ubuntu installation. Because of my requirements, LUBI or UNetBootin would not work because it (1) overwrites the bootloader (e.g., GRUB or NT bootloader) and (2) requires a reboot for the installation.
Is this possible? It seems like the Debian installer could just be run from the command line, but I don't know how you'd point to the right stuff (e.g., an ISO image).
Does anyone know of any way (preferably fully documented/tutorialed, but even theoretical would be great) to remotely install Ubuntu to a machine currently running Windows...
We have 8 machines powering a digital signage system. The machines are not physically accessible (without extreme difficulty) and are currently running windows XP with a VNC server for control.
I want them to run Ubuntu instead. Is there any way anyone can think of that I can do this? My only thought so far is WUBI...but once it boots into Ubuntu ssh isn't installed by default and vnc isn't enabled by default so I wouldn't be able to control it.
Also I'd really like to completely wipe out Windows and use only Ubuntu.
