Ubuntu :: Using Cdrom Locks Up System?
Feb 19, 2010
whenever i try to burn mp3 from a disk in the cdrom, the system will freeze up solid, keyboard, screen, mouse, the whole shebang. ubuntu will see an audio disk in the cdrom, and i can play some tracks off it (sometimes), but trying to copy it to mp3s will crash everything after about 2-3 minutes. somewhere between tracks 2 - 4. anyone else have issues? i have tried a different cdrom, and cables... and i hate to say it but it works under windows.
View 8 Replies
ADVERTISEMENT
Feb 2, 2011
I just installed Ubuntu 10.04 on my old Toshiba Satellite laptop. I'm dual booting with another Linux distro - ZenMini Everything works O.K. running Ubuntu but I can't restart the system with out it locking up. I have to power down completely from Ubuntu. I don't have any problem restarting with ZenMini so its obviously an Ubuntu problem.
View 3 Replies
View Related
Mar 5, 2011
Using Ubuntu 10.04 or 10.10, have a router. Whether connected via ethernet or wifi, I'm experiencing a problem downloading files. Trying to download a linuxmint iso , my laptop will freeze up after 5 or 10 min. I have plenty of disk space, and screensaver off. I've googled quite a bit and can't get a clue. My desktop will freeze up too. I can't imagine what would cause this.
View 1 Replies
View Related
May 16, 2010
Still having problems with the locked black screen freezing a couple of minutes in. I've done everything anyone has recommended on the other threads but nothing and it is driving me crazy. Please, does anyone have any ideas? I tried to install xfce4 but of course, screen froze and went black before I could fully download the software! I've tried the nomodeset but can't save it before doing a reboot (then went via terminal as quick as I could on start up to edit grub, but then... yes, it fell over and froze before I could hit save). So I'm giving this a lot of time I really don't have... such a shame I upgraded, 9.10 was working so well... alternatively,
View 1 Replies
View Related
Jun 9, 2010
System spec:
Core 2 Quad, Q6600, 2.4GHz OC'd to 3GHz
Asus Rampage Formula m/b
2x WD RE2 500GB HDDs ("linux boot" and "winxp boot")
1x Seagate Barracuda HDD ("boneyard")
4GB DDR2-800 RAM
Ubuntu 10.04 LTS
I'm having a really annoying problem with disc activity on my desktop system. Basically, if anything is writing a large amount of data to the hard drive (say, 10MB or over), the machine basically freezes solid. The mouse goes jittery (you move it and it takes a second then moves in one big leap).
For instance, if I try to image a USB hard drive to a file:
# dd if=/dev/sdh of=usbdrive_dump bs=1G
Effectively this works in two portions: it reads 1GB of data to RAM, then blats it out into a file. The machine is perfectly responsive while the USB drive is getting thrashed, but locks solid when the internal SATA drives are in use. Writing to USB HDDs doesn't seem to have the same effect -- I can copy 1GB files to/from them all day long and the machine is perfectly happy.
View 2 Replies
View Related
Nov 28, 2010
I am having problems with suse 11.3 after upgrade. system locks, so would like to know what logs to start looking into for clues as to what is going on.
View 3 Replies
View Related
Jun 16, 2011
Suspend / hibernate locks up my system.
View 4 Replies
View Related
Feb 12, 2010
At first I thought this was a scanner problem, but I've found that if I'm using the mouse while I'm scanning or sometimes just flipping back and forth with my usb kvm the keyboard and mouse become useless. If I'm scanning while I use the mouse, the system locks up. Here is what I'm seeing in /var/log/messages.
After executing xsane:
Feb 12 11:10:41 bnmlinux xsane: io/hpmud/musb.c 1987: invalid usb_open: Permission deniedFeb 12 11:10:41 bnmlinux xsane: io/hpmud/musb.c 1987: invalid usb_open: Permission deniedFeb 12 11:10:41 bnmlinux xsane: io/hpmud/musb.c 1987: invalid usb_open: Permissi
on deniedFeb 12 11:10:41 bnmlinux xsane: io/hpmud/musb.c 1987: invalid usb_open: Permissi
[code]....
View 6 Replies
View Related
Oct 27, 2010
The culprit is a Toshiba Samsung Storage Technology 222A CD/DVD RW drive, aka SH-S222A, sold under the Samsung brand. It occasionally locks up my entire system when I'm ripping an audio CD to a *.toc/*bin image with Brasero. I've had this happen with several different audio CDs, while ripping discs using both Imgburn under Windows XP and Brasero under Ubuntu 10.04. The display freezes completely, the mouse cursor doesn't move, and I can't get any response to keyboard input. Any sounds playing loop endlessly, repeating the last 0.5 sec or so before the cursor freeze. Meanwhile, the hard drive activity light stays on, but the optical drive light does not. I've let the system sit this way for several minutes, with no sign of change. To recover, I must press the system reset button.
I ripped the same discs without incident, using my other optical drive. It is a different brand, Lite-On, but otherwise similar to the Samsung drive: PATA interface, CD/DVD RW, etc. Anyone else have the Samsung SH-S222A? I'm wondering whether there is a bug in the drive's firmware, or I just have a defective drive. It works for other things. I can play audio CDs, access CD-ROMs, and rip audio CDs to individual tracks (rather than a disc image). I can also rip DVDs. Is there some way to recover my system when it locks up from drive misbehavior? I haven't found a way so far. I'm surprised that Ubuntu can be incapacitated so easily.
The SH-S222A has the most recent firmware revision, SB01. I tried to install the newer ID01 firmware from Samsung's website, but got a message that the installer couldn't find a "suitable" drive. I take that to mean that the ID01 firmware is meant for a slightly different variant of the -S222A, perhaps one only sold overseas. Yep, that's pretty much it. My drive's customer code is BEBE. Firmware ID01 is for drives with a different customer code.
View 2 Replies
View Related
Dec 12, 2010
This laptop that I am trying to get Debian 5 working on is occasionally locking up during boot at "Activating Swap..." WTF could cause such a bizarre thing? The swap partition is just empty space. Activating must be nothing more than confirming it exists and mounting it.
View 3 Replies
View Related
Jun 5, 2011
I noticed that sometimes my Linux server will randomly start to lag really badly, to the point where even a http request takes forever. It is an Intel Core2Quad with 8GB of ram running FC9. This is my "Everything" server so it does file, email, DNS, web (for local stuff only), VMs and so on. There are about 5-6 VMs running on it at any given time. I manage it through a VNC session and have some SSH consoles within that session. This way if I reboot my PC I don't lose all my SSH consoles. If I need to SSH to any server I do it from there. I treat it kinda like a terminal server to some extent.
When this slowdown happens, top is not really useful because I also do F@H so that will always be to the top, but it's low priority. The VMs are also always near the top. This does not change whether it's slow or not, so when it's slow, I have nothing to go by on how to troubleshoot. The load does seem to skyrocket though. Right now it's doing the slowdown thing and it's at 8.09. Normally it's at around 3 which imo is good as it it's under 4. I have 4 cores so anything more than 4 means it's queuing. At least that's how I understand it. This is the output of top:
Code:
[root@borg ~]#
[root@borg ~]#
[code]....
View 9 Replies
View Related
Aug 10, 2010
I just installed CentOS 5.5 on my machine and the installation appeared to complete successfully (it said it was successful). When I rebooted and tried to get into my new CentOS, my system completely locked up during the startup. According to the progress bar, it got stuck on the first-run configuration. I have not yet been able to boot into the OS. I am attempting to create a dual-boot system. I already have Windows XP installed on a separate hard drive. The GRUB loader works fine and I can choose either OS to boot into, it's just the CentOS won't finish booting. Windows is completely unaffected.Since I'm assuming the problem stems from the installation, I'll list the steps I followed.
1. Obtained the .iso image from a network drive at work (I am installing on my work machine). The image is dated May 17, 2010.
2. Burned the image to a DVD.
3. Booted from the DVD and chose to install using the graphical interface.
4. Checked the DVD. The installer verified that CentOS could be installed from it.
5. Picked my installation and keyboard languages.
6. Chose to create a custom layout for my partitions. On my second hard drive, I created the following partitions:
- Swap (8196MB, twice my system RAM)
- ext3 (100MB, mounted to /boot)
- ext3 (remaining drive space, mounted to /)
7. Picked my timezone (did not use UTC since Windows will handle setting the system time)
8. Set my root password. You don't get to know ;)
9. Did not choose to install any additional packages besides the KDE desktop. I wasn't sure what I'd need so I checked the option to customize later.
10. The installation than started and 15 minutes later, it told me it had succeeded and to remove the DVD and reboot.
11. Upon rebooting, I let the GRUB loader boot into CentOS (side note, I'd prefer if Windows was the default OS but that's something I should be able to Google on my own).
12. The startup looks like it's going fine until it gets to the first-run configuration, at which point the entire system locks up and requires a hard reboot. I've tried several times since and it always locks up at the same point.
View 6 Replies
View Related
Mar 19, 2010
Laptop has broken internal CDROM. I booted with floppy to get Puppy 431 installed from USB stick. Now I have USB CDROM access thru Puppy. I can mount and see the CD fine.
Is it possible to boot or install from a currently installed linux distro (Puppy)?
I have a second free partition ext2 available, sda2, and GRUB is working fine for me on boot.
(machine also doesn't have boot from USB option, yes, it's old, a project I am working on, I have Nimblex in CD now, I think it's a live cd, I would like to try a few different ones by installing to sda2 and wiping if ng.)
View 5 Replies
View Related
Feb 18, 2009
I recently purchased a Quadro FX 4800 and tried to install it on Fedora 10. During the installation, Fedora didn't recognize my new graphics card and began installing the OS in text mode. I stopped the installation and tried to start over, this time I passed the following command: linux resolution=1024x768. I then proceeded with the installation, and again, I was posed with a text mode installation. I continued with the text mode install and when Fedora was done installing, I rebooted and system just locked up.
At this point I was frustrated, so I reinstalled my old 8800 graphics card and started a new install with something that worked in the past. When the install was done, I loaded the latest NVIDIA drivers and the rebooted. I reinstalled my new graphics card (Quadro FX 4800) then powered up my system. I thought everything was good to go and all of a sudden my system flickered and then locked up during the 'Anacron' testing phase. I then rebooted with the "Ctrl+Alt+Del" hotkeys, but my system always locks up during the 'Anacron' testing sequence. I am aware that the Quadro FX 4800 is a few months old, but how can I get it to work in linux? It has gotten so bad, that I had to resort to using MS Vista.
System specs:
Intel Core Duo Quad Core
4 gigs DDR2
SATA RAID 0
Mobo: 680i SLI
800WATT Power Supply
View 5 Replies
View Related
Jan 20, 2010
I've got a Puppy system running version 4.3.0 that I'm trying to get on the home network. I'm using a D-Link DWA-130 (H/W revision C), which has a Realtek RTL8192U chipset. I got the drivers off of D-Link's website, and they compiled and installed just fine, but when either a) I try to connect to the network, or b) while I'm browsing the web, the system locks up completely. No mouse, no keyboard, no Ctrl-Alt-Bksp to get out of X, nothing.
I'll outline my steps: Install Puppy using a "Full" HDD install (not "Frugal"). Copy the "devx_430.sfs" file (which I got from the Puppy website) from a thumb drive to the "my-documents" folder (although the exact location proabably doesn't matter). Mount it, cd to the mounted directory and execute "cp -a --remove-destination ./* /" and "sync". Copy the kernel source for 2.6.30.5 ("kernel_src-2.6.30.5-patched.sfs4.sfs") to the same directory. Mount it and execute the same commands as before. Copy the folder containing the RTL8192U drivers ("rtl8192u_linux_2.6.0006.1031.2008") to the root directory (i.e. "/"). cd to the folder in the terminal and run "make", "make install".Reboot the machine. Set up networking using the Puppy Internet Connection Wizard. HERE'S WHERE IT SCREWS UP: It connects, but after a while (e.g. just after logging into LQ through it, as a test) it freezes the entire system.
I have to do a hard reboot ("panic button"), then a soft reboot (for some odd reason the usb module won't load after a hard reboot, so the mouse won't work) to get the system working again, only to have it lock up again once it connects to the network.
Are these drivers broken? Outdated? Is there anything I can do to fix this? EDIT: I should add that this only occurs when the adapter is plugged in. If I boot the system with it unplugged, it works fine (probably because it never loads the kernel module).
View 11 Replies
View Related
Aug 29, 2010
I have been trying plop floppy to boot a bootable cdrom from a mobile USB cdrom reader, but the usb cdrom are not recognized.I was thinking that with grub or grub2 or syslinux that would be possible, no ?
View 13 Replies
View Related
Aug 6, 2010
after my last topic that i got working, i realised i have the same problem as i did in windows, but cannot find a fix by google. and this is exactly why im not using capitals at the start of my sentences.
my cap locks key is broken and i want to use the tab key as my cap locks key. is this possible and how do i do it. i'm a linux noob
View 4 Replies
View Related
Aug 18, 2010
I have to type this quick because Ubuntu will lock up on me.The screen goes black, the cursor does NOT move, and the only way to recover is to do a hard reboot. This happened when I had windows XP installed as well, only it would reboot the machine after 5 minutes.I barely have time to open one program and it locks up.Could this be a hardware issue?I tried taking out the video card I had bought, thinking it would solve the problem, but it does not.
View 6 Replies
View Related
Jan 24, 2011
I just installed Ubuntu 10.10 on an older PC along side Windows XP. Everything boots fine in Ubuntu, until I log in. At this point I just get a blank purple window. No icons or start menu or anything. I am able to log in fine in safe mode.
View 5 Replies
View Related
Jan 6, 2010
It gets stuck on the boot screen with the status bar, or on the loggin screen. The only solution is to reset. After that it is usually fine for the day and will reboot fine, it's a dual boot and my boys use windos on it a couple times a day also, that's why it's getting rebooted so much.
Any possible reasons for this? Or, how can I kill the boot image and get a text based boot screen? I tried Startupmanager, but it doesn't seem to work on 9.10.
View 6 Replies
View Related
May 13, 2010
I've experienced this problem with a distribution upgrade and then subsequently with a clean install of Ubuntu 10.04. Basically half the time that I boot up Ubuntu, it completely locks up with the following messages on screen (Sorry, I had to take a picture since it was locked up)However, when it does boot correctly, it pauses for just a moment after displaying the above text, and then displays a few additional lines, after which it goes on to boot 'normally'.
The next lines show 'plymouth' and 'ureadahead' processes being killed. If these lines show up the boot continues normally, otherwise the boot process hangs at the first picture.It is pretty frustrating to have to perform a hard restart during nearly every other boot, and the hangs seem almost completely random. Sometimes, it happens a couple times in a row, sometimes I can boot normally several times in a row. It also doesn't seem to be related to a cold start, versus a restart.
View 3 Replies
View Related
Aug 30, 2010
I am running Ubuntu 10.04. I have a HP Pavilion Dv7 Laptop, 4GB of ram, An AMD Turion X2 processor, my main HDD is 250GB Samsung and my other internal HDD is a 250GB Western digital. I am Very new to Ubuntu and the forums, So i wish to apologize if this is posted in wrong section. Now on to my problem, While using my computer the screen will go gray(all open windows), and my HDD light stays on. I never had this problem before on my other computer that has Ubuntu on it too. And as i said every window goes gray and the HDD light stays on and it happens randomly. It will come back to normal some times but others i have to Force Power down.
View 4 Replies
View Related
Sep 19, 2010
Once in a while, my mouse pointer will just lock up and then when I try to kill the X server by pressing Ctrl + Alt + Backspace on my keyboard, it quits the desktop and it shows my wallpaper. It does not go back to the login screen. How do I fix this problem?
View 5 Replies
View Related
Nov 22, 2010
I have disabled the screensaver from locking the computer and asking for a password. I did this by unchecking the box in System > Preferences > Screensaver which says 'Lock screen when screensaver is active.'
However, the screensaver still locks the screen.
I'm running Ubuntu 10.10 64-bit on an HP Pavilion dv5.
View 2 Replies
View Related
Dec 6, 2010
When I try shutting down Ubuntu (10.04) via the terminal (sudo shutdown now) it locks on the splash screen. I doesn't doe that when I shutdown with the button.
View 2 Replies
View Related
Feb 7, 2011
I would like to run a command when the screen locks, and another when it unlocks. I work in a shared office space. When I leave my desk (and the screen locks) I would like the webcam motion capture software 'motion' to run, in order to record anyone who uses my computer when I'm gone. Likewise when I come back and unlock the screen I would like it to pause.
View 1 Replies
View Related
Mar 1, 2011
When Ubuntu loads on my laptop (micron gx3, pentium 4) it freezes on the install screen. Is there something about my hardware that might cause a problem? I looked @ the other micron GX3 forums and didn't see the same case
View 1 Replies
View Related
Jul 9, 2011
About a week after installing 11.04, I started noticing that my computer basically locks up after leaving it for many hours. When I come back, I cant get any programs to respond. I click on Firefox and it takes about one minute for it to finally respond. If I try to launch Konsole, it locks up too. But suddenly all programs start responding at the same time, after about one minute.
This is very frustrating and I just feel the problem is zeitgeist. Of course I am not sure because I cant even run System Monitor to check the problem since I cant run any apps for about a minute. By the time I run System Monitor everything is working again.
View 6 Replies
View Related
Feb 2, 2011
I can click to close a program to close it and it will lock. No matter what I do; (click on EDIT OR FILE, etc, the system will lock. This happens several times each day. I shut down using ALT + SYSRQ + R, S, E, I, U, then B for a soft shutdown. I have used Ubuntu before, but this is a fresh install after having problems with the computer. Computer is a Dell 2400.
View 2 Replies
View Related
Dec 31, 2010
My cdrom is not mounting on ubuntu 8.04. I find this message in syslog (below). How can I resolve this?
<code>
Dec 30 16:13:26 ubuntusap kernel: [ 351.765683] usb-storage: device scan complete
Dec 30 16:13:26 ubuntusap kernel: [ 351.766423] scsi 5:0:0:0: CD-ROM Memorex DVD+-RAM 530L v1 5M64 PQ: 0 ANSI: 0
[Code]....
View 9 Replies
View Related
