I am new to linux. I want to run a server-client (c#) windows/console based application on CentOS 5.4. The code in C# has made using visual 2010. Should I use wine for this purpose or go for mono?
View 1 Replies
So, I have compiled a C# program on Linux using MonoDevelop. When I try to execute the resulting binary, my system tries and fails to run it as a windows executable, with wine. Wine gives me the following message:
$ ~/bin/MyMonoApp
wine: Install the Windows version of Mono to run .NET executables
~/bin/MyMonoApp: command not found
I can only convince it to run by explicitly calling mono:
$ mono ~/bin/MyMonoApp
So, how can I make this the default, so I don't have to explicitly call mono every time?
My office is on migrating to UNIX system. I am configuring Centos as our server including some program will be running on it. But one of the problem is we use foxpro for operating some program on server directly. I can run that program on Centos using DOSBox. My question is how can i run that program on winxp client that connected to network through samba to that program on server? so my plan is just give the shortcut and link it to server. I have tried to open it but not work.
View 1 Replies View RelatedI just installed wine in an attempt to open .exe files. When running the code line /wine/file.exe the following message appeared: wine: Install the Windows version of Mono to run .NET executables. I tried out two things, both of which didn't work and the message still appears every time I try to use wine
1st: yum install mono-core.i686 It is the Mono CIL runtime, suitable for running .NET code. 2nd: downloading mono windows version from the original website but still couldn't install it because it is an .exe file
I am trying to install a program named "Ntrip" with wine, running Linux Mint 10 64bit (based on Ubuntu 10.04) I installed the software without problems, when I try to start it I get the following error:
Code:
fixme:actctx:parse_manifest_buffer root element is L"asmv1:assembly", not <assembly>
wine: Install the Windows version of Mono to run .NET executables
As far as I know, mono is by default on every Ubuntu 10.04 installation, however as per the error message, I installed the Windows version of Mono via Wine successfully. Trying to start the program again, still coming up with above error.
I've been using NX to login to a remote machine (using the free NoMachine NX client). I've been pretty happy with it, but I'd like the ability to run it as a separate desktop, rather than a window within my existing local desktop. I think I'd like to be able to start X Windows with only the NX client running, either in another virtual console (VC) in addition to my local desktop or perhaps sometimes as the only desktop running. My first thought was to go to another VC and start an empty X Server with only the NX client running with the command
Code:
xinit /path/to/nxclient -- :1
That seemed to work, except that just as the remote desktop is about to appear the X server shuts down. It seems that the nxclient process spawns the child nxssh and then exits, and at that point X Windows closes because the command it was started with has ended. I assume there's a simple way to fix this by writing a script that will only terminate once all the child processes have terminated and calling that on the xinit command line, but I'm not sure how to do that.
I want to use a program, that runs windows and "linux with mono". I run Kubuntu 10.10.
Quote:
koen@Koen-Kubuntu:~/Documents/Software/SuperOneClick_1_6_5$ mono SuperOneClick.exe
** (SuperOneClick.exe:4191): WARNING **: The following assembly referenced from /home/koen/Documents/Software/SuperOneClick_1_6_5/SuperOneClick.exe could not be loaded:
[Code]....
I have a Nis server on Suse 11 which is configured using Yast and nis clients on Suse and CentOs .All clients which is on the Suse Os is working fine. But on CentOs , users couldn't login using nis username.I have mounted home directory using nfs in fstab . I can switch to nis users homedirectory only when i am root. But nis users could'nt login on reboot.' ypcat passwd username ' is showing the output . No selinux is enabled in the client .Is there is any problem with Suse server to Centos Client in nis ??
View 2 Replies View RelatedI am building a Terminal Server Client using debootstrap for work. I found a couple post that suggested that I can change my inittab configuration to not load login. However it is my understanding that inittab has been replaced by upstart. I would like to know how to modify upstart so that instead of the user seeing a login: prompt my script is automatically loaded (rrdesktop)(revisedrdesktop) and the user is brought off a live cd to my terminal server.
View 2 Replies View RelatedI have a problem running a game on a fresh Slackware64 install.
Slack version is 13.37
I've followed alien bobs instructions for a multilib environment from here:[url]
And then used sbopkg to download and compile wine version 1.2.2, which went through just fine.
After that I grabbed cabextract from sbopkg and ran this: wget [url] sh winetricks d3dx9 To get the DX9.
But, when I try to run the game, this is the error I get:
Code:
The game it self ran perfectly on the 32 bit version of Slackware, tested with 13.0. So now I think I'm missing some libs or something, but I have no clue which.
i installed unix services for windows 3.5 on a windows xp pro box and it installed fine. I configured nfs on the debian box and exported the ip of the client computer and forwarded port 2049 correctly. I followed the instructions for setting up teh nfs client on windows. However whenever i go to tools->map network drive and type in the server-domain-name:/file-address it says it cannot connect?
View 6 Replies View RelatedI sshed to a server a week ago, then ran *screen* and created a few windows in my screen session. I then ran a few programs on those screens. All the programs were running in the background (I run them with &). I did not close or detach from the screen sessions. So I was still connected to those screen sessions from my client machine.
Then, this morning I find my client machine rebooted. When I do screen -ls I find there are no screens available to reattach to. But that is not the worst part. The strange thing is that all my processes (which were running on the server) have disappeared as well, even though they were running in the background. I thought 1) using screen I will be able to re-attach to old screens when my client restarts, 2) If I have sshed to a server and have run programs in the background, restarting the client should not stop those programs (even if I had not used screen).
I would like to know if anyone has run more than one version of mono concurrently. I want to host a Battlefield 2 server with bf2ccd that requires mono 1.1.12. CentOS 5.3 repos provide mono 1.2.4 which is neither new enough nor old enough to support bf2ccd. I have considered compiling a newer version or an older version to accommodate this but I think that the only fully supported version is the 1.1.12 and I want to have the newer mono for other projects. I have used Slackware exclusively up to now and am not familiar with CentOS yet so I would like to avoid compiling if I can. The server is an unmanaged dedicated server so I'm not certain of all of the details. AFAIK it is a standard CentOS 5.3 install.
View 4 Replies View RelatedI have a CentOS + Samba server and Windows XP client machines. Users, passwords and permissions are entered on the server machine.users and passwords ( same as on the server ) are entered in the XP client machine.When attempting to access a public file on the server using a XP client machine and the IP address of my server, I am asked a user name and password and none of the already entered seem to work. I cannot access the server file (prompted again and again to enter user name and password). What did i miss
View 7 Replies View RelatedI am at a loss. I can not access my work remote desktop via the terminal server client on my wired box running Ubuntu 10.10. My wireless laptop is able to connect right away once I established the VPN connection. The VPN connection is established on both boxes with no problems.
When I tried the Terminal Server Client on my wired boxed, it says it can not establish a connection. Yet my wireless box gets connected immediately!
I check the /etc/dhcp3/dhclient.conf and the /etc/resolv.conf to see if there were any differences, but they are essentially the same. When I have the vpnc connection, they both recognize it and I am able to ping the IP address shown when I do a "ifconfig" on the terminal.
What can be the problem? Anything I need to configure on a wired computer versus a wireless one? What else can I check?
I have developed a web application written in c# I'm using:
O.S. : CentOS 5.2
WebServer: Apache (2.19)
Mod Mono (1.9)
DB server: MySql
Some Configuration parameters:
Max Connection number: 200
When the site receives more than 50 simultaneous connections, it becomes unreachable even thought Apache seems to work. I attach:
- Apache server status when the service falls down
- Apache configuration file
I am trying to make FTP server on Linux machines(Fedora/Centos) . How can we install and configure FTP?
View 1 Replies View RelatedI want to install .net framework, ERP & Oracle Runtime 11g in linux, using mono. how to install mono in linux & .net frame work.
Destribution CenOS/Fedora.
my App requires at least version 2.0 of mono. (Suse is up to 2.5) I have searched and searched repos, including Groups and Testing for any mono and can only locate very old version 1.x.
View 3 Replies View RelatedI recently got a new server. I installed CentOS 5.2. Here's some more info:
[root@thalamus etc]$ uname -a
Linux thalamus.tch.harvard.edu 2.6.18-92.el5 #1 SMP Tue Jun 10 18:51:06 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
I can't get the client server to authenticate to the openldap server. I can authenticate on the server itself though. I can su to, login and shh into the openldap server and become a ldap user. I just can't become an ldap user on the client.I didn't setup TLS/SSL. I can do that after I have it working. I'm using hashed passwords though. I don't have replication setup. I'm am tying to setup the most basic openldap environment then build from there. I have read the openldap section in the admin guide.
My setup at home.
Openldap server � light.deathnote.net -- 10.0.1.21
client server � vm-centos01.deathnote.net � 10.0.1.7 -- VM on virtualbox
Virtualbox host � L (OS MAC) � 10.0.1.2
router (apple airport extreme) / default gatway � 10.0.1.1
All computer can reach the internet and ping each other. When I installed centos I disabled SELinux.I used these guids to setup my openldap.
[URL]
Below I have included some output from the files I'm using with openldap.
[root@vm-centos01 ~]# tail /var/log/messages
Jul 2 09:25:33 vm-centos01 xfs: nss_ldap: reconnecting to LDAP server (sleeping 16 seconds)...
Jul 2 09:25:49 vm-centos01 xfs: nss_ldap: failed to bind to LDAP server ldap://light.deathnote.net: Can't contact LDAP server
Jul 2 09:25:49 vm-centos01 xfs: nss_ldap: failed to bind to LDAP server ldap://10.0.1.21/: Can't contact LDAP server
[code]....
I'm running CentOS operation system 5.2 with the following softwares installed:
1) OS: CentOS release 5.2 (Final)
2) Web Server: Apache 2.2.4
3) Mono: Mono 1.2.4
4) xsp: xsp 1.2.4
5) mod_mono: mod_mono 1.2.4
I don't find any errors during installation of all of the above items. Problem is that, when I try to invoke one of my ASMX file from the browser, I'm getting the following error in my $APACHE_HOME/logs/error_log. This same ASMX is working fine in one of my RedHat ES Linux 5 system, what I mean here is I don't have any compilation or runtime errors in my ASMX code.
ERROR DETAILS
[Sat May 16 08:03:38 2009] [notice] Apache/2.2.4 (Unix) mod_mono/1.2.4 configured -- resuming normal operations
System.PlatformNotSupportedException: This operation requires Windows NT, Windows 2000, or Windows XP.
at System.Web.Hosting.ApplicationHost.CreateApplicationHost (System.Type hostType, System.String virtualDir, System.String physicalDir) [0x00000]
[Code]...
i have a centos 5.5 server running tomcat,oracle xe,apache etc..i would like to be able my windows machine to access this server by name, and not ip, for example have http://backserv:7080 for oracle xe web admin and so on..i know one way is DNS, but if i install oracle on a windows machine in peer-to-peer network, i can allready access with by it's name. o i'm guessing i should do something with samba, wins or something like that.never mind i got now for the REAL complex stuff of insalling web sphere 7 without user interface (need to look for a response file).
View 2 Replies View RelatedI have a problem about installing DHCPv6 on CentOS . I have 2 machines,a machine is DHCPv6 server and another is DHCPv6 client,they are in the same network.I configure 2 machines as the following link :[URL]
But,the client machine doesn't get a ipv6 from server.
does anybody have a nice tutorial about creating and installing Apache client certificate (PKCS12) ? I`m looking for some tutorials to CentOS. This what I have found on the internet for some reasons doesnt work. Or maybe somebody could write here how to do it?
View 1 Replies View RelatedI'm carrying out a project for my university (CIT in Cork, Ireland) and I'm using CentOS running over WMware. I have a server and a client. The server has no GUI (command line UI) while the client has a UI. I need to install a Simple Forum Machine application and I'm told to FTP the files into the server. I figured out that the best option is to load the files in the client via the GUI and then ftp them in the server. How do I transfer the files from a the client t o the server using FTP? I'm totally new to Linux so the more details the better. Also I'm trying to mount a USB key on the server but have had no luck.
View 2 Replies View RelatedI configured openLdap in RHEL5 on virtual achines,everything is working fine, I created a user called ldapuser,in LDAP server and i created a home directory for ldapuser in my LDAP client, now i can able to login to the both Server and client with ldapuser account....
Now here what am expecting is i want to export my server's home directory to the client, i dont want to create home directories manually in the client machine, i googled about that, and it can be done through autofs.....
what need to be done on the client and server side.
I'm new to CentOS and has recently use it.
I'm looking for a way to configure DHCP client so it would dynamically set the hostname and register itself to a DNS server. I don't have access to the DNS server.
I set up a L2TP/IPsec VPN server using xl2tpd and racoon on CentOS 5.5.
Now clients can successfully dial up to the server, but I can't find a way to know who connects to my server.
Is there any method or command to show l2tp client's information, such as his IP address, username.
I am bit new to Linux and have setup caching-only name server with Centos 5.5. when i do dig server, it provide resolutions. but when i use the server IP as DNS on my windows client, it says, "connection refused" on the NSlookup output. (IP table didn't enable) My server Ip is 192.168.1.253 and bellow is the configuration of "/var/named/chroot/etc/named.conf"
options {
listen-on port 53 { 127.0.0.1; 192.168.1.253; };
listen-on-v6 port 53 { ::1; };
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
memstatistics-file "/var/named/data/named_mem_stats.txt"; .....
