Ubuntu :: Get Terminal Server Client Running?
Jan 23, 2010
I am building a Terminal Server Client using debootstrap for work. I found a couple post that suggested that I can change my inittab configuration to not load login. However it is my understanding that inittab has been replaced by upstart. I would like to know how to modify upstart so that instead of the user seeing a login: prompt my script is automatically loaded (rrdesktop)(revisedrdesktop) and the user is brought off a live cd to my terminal server.
View 2 Replies
ADVERTISEMENT
Dec 3, 2010
I am at a loss. I can not access my work remote desktop via the terminal server client on my wired box running Ubuntu 10.10. My wireless laptop is able to connect right away once I established the VPN connection. The VPN connection is established on both boxes with no problems.
When I tried the Terminal Server Client on my wired boxed, it says it can not establish a connection. Yet my wireless box gets connected immediately!
I check the /etc/dhcp3/dhclient.conf and the /etc/resolv.conf to see if there were any differences, but they are essentially the same. When I have the vpnc connection, they both recognize it and I am able to ping the IP address shown when I do a "ifconfig" on the terminal.
What can be the problem? Anything I need to configure on a wired computer versus a wireless one? What else can I check?
View 7 Replies
View Related
May 18, 2010
I love Ubuntu and last night I wiped crappy windows 7 off my laptop and installed and customised a beautiful Ubuntu 9 OS ( I tried the new 10.04 first but it had some issues for me ). Now, up here at work we got a Domain Controller that is running windows server 2008, I need to be able to RDP into it and mess with it, I tried to use the Terminal Server Client that comes with Ubuntu, and I can see the login screen just fine, but when I try to log in it says incorrect password and wont go through.
Just to make sure it was not my account that was the issue, I went to my boss and used his computer (a MAC running OSX) and I was able to get into the same server with the same credentials, so it has something to do with my computer not my account. Do any of you have any ideas on what the problem could be?
View 5 Replies
View Related
Jun 8, 2010
I've been using NX to login to a remote machine (using the free NoMachine NX client). I've been pretty happy with it, but I'd like the ability to run it as a separate desktop, rather than a window within my existing local desktop. I think I'd like to be able to start X Windows with only the NX client running, either in another virtual console (VC) in addition to my local desktop or perhaps sometimes as the only desktop running. My first thought was to go to another VC and start an empty X Server with only the NX client running with the command
Code:
xinit /path/to/nxclient -- :1
That seemed to work, except that just as the remote desktop is about to appear the X server shuts down. It seems that the nxclient process spawns the child nxssh and then exits, and at that point X Windows closes because the command it was started with has ended. I assume there's a simple way to fix this by writing a script that will only terminate once all the child processes have terminated and calling that on the xinit command line, but I'm not sure how to do that.
View 6 Replies
View Related
Nov 18, 2010
I am trying to use a smartcard with a remote windows computer via the terminal server client. I didn't see any settings in the UI, but I did see a redirectsmartcards property in the conf file. I tried setting it from 0 to 1 but it didn't seem to have any effect (still getting traditional login dialog on remote computer). Does anyone know if this setting is supported or not? I did install pcscd and friends and when I insert the usb smartcard pcscd does show up in /var/log/messages so I think the smartcard is working okay locally.
View 2 Replies
View Related
Jan 26, 2011
I'm currently successfully using the Terminal Server Client to connect to an SBS 2003 server at a remote location. I've been trying to figure out if it's possible to connect to any of the XP machines on the LAN behind it. I currently have to use RWW in IE on a VirtualBox XP machine to do that, and I'd love to be able to get rid of VirtualBox completely.
The server has 2 NICs, one connected to the internet, and the other connected to the LAN. There is only one public IP. The computer I'd most like to connect to has a static, private IP. Anybody done anything like this or have any thoughts on how to get it to work?
View 2 Replies
View Related
Jan 5, 2010
More for my own posterity than anything else, I thought I'd document here the way to get to eDesktop through linux (debian, ubuntu) at the University of West Florida (UWF), since they appear to only support Windows through their documentation on the University web site, and the link through Argus (the secure web site) doesn't work in Linux. This is sometimes needed to use the University resources (libraries and computer programs) from remote locations, and otherwise a google search is fruitless. I had to have a guy in the computer science department show me how to do it.This may apply for other Universities with similar setups.
View 1 Replies
View Related
Feb 24, 2010
In windows using remote desktop connection you can press Ctrl+Alt+minus to copy the current window on the remote desktop to the clipboard. How do you do that in Ubuntu's terminal server client? I have not found any key combination that works
View 2 Replies
View Related
Mar 12, 2010
I would like have my client computer be able to boot off of a cd right into a terminal server connection. Not click here, then there, enable wireless....so on.. Just boot into a terminal server connection screen.
View 1 Replies
View Related
Sep 9, 2010
So I setup VNC on my Mac (that runs Snow Leopard) and my PC (that runs Ubuntu) and I gave the IP address to Ubuntu, entered the password and it worked fine. The problem is that it still works fine... I only made this connection to test it because I thought it'd be cool, which it was (for a while). Now I cannot delete this connection whatsoever!
I have tried changing the password on the Mac, limiting the users, and even switching it off completely by unchecking its checkbox. I have also tried limiting the users... BUT UBUNTU STILL MANAGES TO GET INTO MY COMPUTER! This is really annoying because anyone using the PC downstairs can now go into my Mac and mess about with things - I hate this. Somehow, Ubuntu has locked in on my Mac and, despite the changes, can earn access no matter what!
View 5 Replies
View Related
Apr 27, 2011
I'd document here the way to get to eDesktop through linux (debian, ubuntu) at the University of West Florida (UWF), since they appear to only support Windows through their documentation on the University web site, and the link through Argus (the secure web site) doesn't work in Linux. This is sometimes needed to use the University resources (libraries and computer programs) from remote locations, and otherwise a google search is fruitless. I had to have a guy in the computer science department show me how to do it. This may apply for other Universities with similar setups. It was impossible for me to figure it out on my own, I had to go back to my old 9.04 partition to get the info...
1) Open Terminal Server Client (Applications>Internet>...)
2) Insert as follows:
Code:
Computer: eDesktop.uwf.edu
Protocol: RDP
User Name: YOUR USERNAME
[code]...
3) OPTIONAL BUT RECOMMENDED click Save As and save it as a quick connect so you don't have to refer to this again.
4) Flip through the other tabs and configure as desired, and click Connect!
View 7 Replies
View Related
Aug 4, 2010
I am new to linux. I want to run a server-client (c#) windows/console based application on CentOS 5.4. The code in C# has made using visual 2010. Should I use wine for this purpose or go for mono?
View 1 Replies
View Related
Nov 27, 2009
I can successfully connect to a remote Windows Computer using Terminal Server Client but I cannot save the profile (Fedora 12).This means I have to enter the details every time I wish to connect. As I have many different remote locations I need to access on a regular basis is there any way to save the profiles?
View 6 Replies
View Related
Nov 15, 2009
i installed unix services for windows 3.5 on a windows xp pro box and it installed fine. I configured nfs on the debian box and exported the ip of the client computer and forwarded port 2049 correctly. I followed the instructions for setting up teh nfs client on windows. However whenever i go to tools->map network drive and type in the server-domain-name:/file-address it says it cannot connect?
View 6 Replies
View Related
Jul 30, 2010
My office is on migrating to UNIX system. I am configuring Centos as our server including some program will be running on it. But one of the problem is we use foxpro for operating some program on server directly. I can run that program on Centos using DOSBox. My question is how can i run that program on winxp client that connected to network through samba to that program on server? so my plan is just give the shortcut and link it to server. I have tried to open it but not work.
View 1 Replies
View Related
Nov 25, 2009
Is there a good terminal services client available I can connect to my Windows boxes from Fedora12? I am willing to pay for a commercial license if there is a good one
View 7 Replies
View Related
Apr 21, 2011
I sshed to a server a week ago, then ran *screen* and created a few windows in my screen session. I then ran a few programs on those screens. All the programs were running in the background (I run them with &). I did not close or detach from the screen sessions. So I was still connected to those screen sessions from my client machine.
Then, this morning I find my client machine rebooted. When I do screen -ls I find there are no screens available to reattach to. But that is not the worst part. The strange thing is that all my processes (which were running on the server) have disappeared as well, even though they were running in the background. I thought 1) using screen I will be able to re-attach to old screens when my client restarts, 2) If I have sshed to a server and have run programs in the background, restarting the client should not stop those programs (even if I had not used screen).
View 2 Replies
View Related
Sep 3, 2010
Muse will not make sound. The jack server is running, but not from the terminal. I can only get it to run with the Jack control. But it IS running. And still, I hear no sound from muse.Muse is connected to the system in the connection window.So, whats the problem?
View 3 Replies
View Related
May 10, 2010
i found this video, and i really want to do the same. *newbie needs to learn [URL]...my question is, what need to be installed and how?
is there any specific configuration to make it works?
and will it work if i want to connect from Ubuntu to Fedora ?
View 1 Replies
View Related
Feb 5, 2011
I've recently setup a custom home server running openSUSE 11.3 64-bit in terminal mode. I've since successfully setup and configured it to act as an iSCSI target using the iscsitarget package and the corresponding kernel module, along with the YaST module for the configuration. Prior to setting up my hard drive accordingly, however, I noticed that when I ran 'zypper up' in a terminal I got the following:
Code:
pph-server:~ # zypper up
Loading repository data...
Reading installed packages...
[Code]....
At the time I accepted, and found later that it removed the setup I had, meaning I had to start over. However when I ran YaST in a terminal it then wanted to re-install the iscsitarget package, which subsequently removed the tgt package, and so this continued for a bit. (Thankfully no actual data was stored on the target at this stage .) For the time being I've locked the iscsitarget package and the kernel module to prevent zypper from wanting to remove it and install tgt instead since I now have my target working as I want.
The question I have is why zypper was trying to remove iscsitarget and install tgt, and yet the corresponding YaST module was wanting to do the opposite. Is tgt considered a better option by the openSUSE developers, in some way, for setting up an iSCSI target? Is iscsitarget development/availability being ceased by them in favour of tgt? Is there something else I'm missing? Neither of these packages seems old to me: the latest version of iscsitarget was released on SourceForge last July, while tgt was only updated this month.
View 2 Replies
View Related
Jun 11, 2011
I configured openLdap in RHEL5 on virtual achines,everything is working fine, I created a user called ldapuser,in LDAP server and i created a home directory for ldapuser in my LDAP client, now i can able to login to the both Server and client with ldapuser account....
Now here what am expecting is i want to export my server's home directory to the client, i dont want to create home directories manually in the client machine, i googled about that, and it can be done through autofs.....
what need to be done on the client and server side.
View 6 Replies
View Related
Apr 5, 2011
I would like to hear about a (telnet) terminal for Linux that can run VB scripts. The need is for configuration of a target board. I like secureCRT very much, but I can not use it from a Linux workstation.
View 4 Replies
View Related
Oct 12, 2010
I recently installed Ubuntu and dolphin file manager but when I press Shift+F4 for Terminal I get this error: Could not launch the terminal client: KDEInit could not launch 'konsole'.: Could not find 'konsole' executable. Now, I know I can open it with Ctrl+Alt+T but with shift+f4 from dolphin, terminal starts with current folder in command line.
View 2 Replies
View Related
Jun 21, 2011
I am looking for an interactive terminal based twitter client. It seems like there are a few around, but some of them appear to be abandoned. Does anyone have any recommendations of a good one to use?
View 1 Replies
View Related
Jun 26, 2010
i got ubuntu aabout a month ago and ive been trying to play games but none of them work for me then i remebered about rsps and used the ubuntu forum to get help with the 508 servers. (which work for me new if u need help i think i can help or post a lonk on how to get the 508 server working on ubuntu) but now i wanna try 317 servers the client loads which isnt my problem but then when i get in game there are invisible people (i see them on minimap) and when i do 1 move the client crashes. here is the error it get.hs_err_pid2288.log
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0x00007fb8680f3f19, pid=2288, tid=140429507319568
# JRE version: 6.0_20-b02
# Java VM: Java HotSpot(TM) 64-Bit Server VM (16.3-b01 mixed mode linux-amd64 )
# Problematic frame:
# V [libjvm.so+0x1dcf19]
[Code]...
View 5 Replies
View Related
Feb 7, 2011
I was trying to connect to my machine over the internet through a VPN. I was able to connect, with a fairly high ping (30-40 ms), then when I use Terminal Service Client to connect, just the login screen takes FOREVER!! Using a Virtualbox WinXP, I connect to the VPN and use its Remote Desktop and it is super fast.
View 9 Replies
View Related
Jun 25, 2009
I have a Nis server on Suse 11 which is configured using Yast and nis clients on Suse and CentOs .All clients which is on the Suse Os is working fine. But on CentOs , users couldn't login using nis username.I have mounted home directory using nfs in fstab . I can switch to nis users homedirectory only when i am root. But nis users could'nt login on reboot.' ypcat passwd username ' is showing the output . No selinux is enabled in the client .Is there is any problem with Suse server to Centos Client in nis ??
View 2 Replies
View Related
Mar 21, 2011
I'm SSHing to a headless Ubuntu box and sometimes need to upload files from that box via FTP. The built-in FTP client does not show the progress of my upload (or at least I don't know how to view it). I just see this during the operation (which could take up to an hour):150 Opening BINARY mode dataonnection for MyFileAre there any FTP clients which I could use in terminal and would show the progress (some kind of a progress bar or just the percentage)?
View 2 Replies
View Related
Feb 10, 2011
I currently use Deluge for torrents, and I have many torrents which I would like to keep seeding 24/7 on my desktop computer. This machine is on 24/7, and has many users, both locally (using the standard Ubuntu GUI on a monitor, keyboard, and mouse hooked to the actual machine) and remotely (via ssh). My point is that this is a multiuser system. I am the administrator/have root access.
Anyway, the point is, I would like to run a BitTorrent client on this system without having to have any user logged in just to sustain it. Currently, the only way I know of keeping BitTorrent active at all times is to log in locally via the GUI, turn on Deluge, and then hit "lock screen," protecting my session and allowing others to log in locally as well while I'm gone (via "Switch User"). It is a big drain on system resources to have me logged in all the time (especially with a GUI).
I think I have explained the problem...Is there a solution? I use Deluge and like it, so I'd like to stick with it, but if there is a better option for this purpose, I am willing to switch.
View 2 Replies
View Related
Apr 5, 2010
I was following the installation instruction in the official website for Termtter. But it doesn't work...
I did
Code:
sudo gem install termtter
. It finished successfully. It says 'command not found' when I run 'termtter'.
View 1 Replies
View Related
