General :: Mono Error Message Using Wine?
Sep 26, 2010
I just installed wine in an attempt to open .exe files. When running the code line /wine/file.exe the following message appeared: wine: Install the Windows version of Mono to run .NET executables. I tried out two things, both of which didn't work and the message still appears every time I try to use wine
1st: yum install mono-core.i686 It is the Mono CIL runtime, suitable for running .NET code. 2nd: downloading mono windows version from the original website but still couldn't install it because it is an .exe file
View 6 Replies
ADVERTISEMENT
Aug 24, 2010
So, I have compiled a C# program on Linux using MonoDevelop. When I try to execute the resulting binary, my system tries and fails to run it as a windows executable, with wine. Wine gives me the following message:
$ ~/bin/MyMonoApp
wine: Install the Windows version of Mono to run .NET executables
~/bin/MyMonoApp: command not found
I can only convince it to run by explicitly calling mono:
$ mono ~/bin/MyMonoApp
So, how can I make this the default, so I don't have to explicitly call mono every time?
View 1 Replies
View Related
Jun 7, 2010
I am trying to run a .NET program with mono. I got the following:
Code:
Parser Error Message: Assembly ActiveReports.HtmlExport, Version=3.3.0.1999, Culture=neutral, PublicKeyToken=cc4967777c49a3ff not found
This means it requires ActiveReports, but could not find any Linux version of that software. So, is there any Linux alternative for it?
My system is Debian/sid (unstable).
View 1 Replies
View Related
Aug 4, 2010
I am new to linux. I want to run a server-client (c#) windows/console based application on CentOS 5.4. The code in C# has made using visual 2010. Should I use wine for this purpose or go for mono?
View 1 Replies
View Related
Feb 8, 2011
I am trying to install a program named "Ntrip" with wine, running Linux Mint 10 64bit (based on Ubuntu 10.04) I installed the software without problems, when I try to start it I get the following error:
Code:
fixme:actctx:parse_manifest_buffer root element is L"asmv1:assembly", not <assembly>
wine: Install the Windows version of Mono to run .NET executables
As far as I know, mono is by default on every Ubuntu 10.04 installation, however as per the error message, I installed the Windows version of Mono via Wine successfully. Trying to start the program again, still coming up with above error.
View 2 Replies
View Related
Aug 10, 2015
I installed Mono on Debian 8 using apt-get. Specifically, I followed these instructions: [URL]..
Then suddenly, my entire machine locked up . . . I gave it a few minutes and then cold booted. It came up to a login prompt but no gnome. sigh. So, I use apt-get to uninstall all of the mono stuff and I also did apt-get clean, apt-get autoclean, apt-get autoremove . . . and rebooted . . . to a login prompt.
So, I installed gnome using apt-get install gnome-core and then after a reboot I got gnome again.
However, every time I log in, I see an "Oops" message flash briefly and then the GUI loads. Everything seems to be ok . . . but I don't like seeing that message; it says something like "something went wrong, please log out . . ."
I kind of dug around /var/logs a little and there are some error messages in kern.log files . . . how I can get my machine back to the state it was in, i.e., not flashing an Oops message when I authenticate?
View 3 Replies
View Related
Mar 18, 2011
i first noticed when i tried to get mono via sudo apt-get install mono i got the error
[Code]...
E: Package 'mono' has no installation candidate then i tried to get it through the software center and i noticed the software center wasn't opening.... so i tried searching to find if someone else had the proroblem, they did, one solution was to reinstall python but if i open syapitic software i get the error
[Code]...
View 6 Replies
View Related
Feb 28, 2010
I would like to know if anyone has run more than one version of mono concurrently. I want to host a Battlefield 2 server with bf2ccd that requires mono 1.1.12. CentOS 5.3 repos provide mono 1.2.4 which is neither new enough nor old enough to support bf2ccd. I have considered compiling a newer version or an older version to accommodate this but I think that the only fully supported version is the 1.1.12 and I want to have the newer mono for other projects. I have used Slackware exclusively up to now and am not familiar with CentOS yet so I would like to avoid compiling if I can. The server is an unmanaged dedicated server so I'm not certain of all of the details. AFAIK it is a standard CentOS 5.3 install.
View 4 Replies
View Related
Jun 9, 2011
The program I want to use: ProppFrexx Tagger or ProppFrexx Meta Data Editor, can be found here: ProppFrexx ONAIR - The Playout and Broadcast Automation Solution I need this to tag WAV files with RIFF INFO Tags.The Sony PSP can read RIFF Tags! so yeah, that's the reason I need this program. here the complete error message
Code:
exception inside UnhandledException handler: USER32.dll
I don't have Windows anymore, and I never going to use Windows again I hope there is a fix for that
View 3 Replies
View Related
May 16, 2009
I'm running CentOS operation system 5.2 with the following softwares installed:
1) OS: CentOS release 5.2 (Final)
2) Web Server: Apache 2.2.4
3) Mono: Mono 1.2.4
4) xsp: xsp 1.2.4
5) mod_mono: mod_mono 1.2.4
I don't find any errors during installation of all of the above items. Problem is that, when I try to invoke one of my ASMX file from the browser, I'm getting the following error in my $APACHE_HOME/logs/error_log. This same ASMX is working fine in one of my RedHat ES Linux 5 system, what I mean here is I don't have any compilation or runtime errors in my ASMX code.
ERROR DETAILS
[Sat May 16 08:03:38 2009] [notice] Apache/2.2.4 (Unix) mod_mono/1.2.4 configured -- resuming normal operations
System.PlatformNotSupportedException: This operation requires Windows NT, Windows 2000, or Windows XP.
at System.Web.Hosting.ApplicationHost.CreateApplicationHost (System.Type hostType, System.String virtualDir, System.String physicalDir) [0x00000]
[Code]...
View 1 Replies
View Related
Nov 24, 2009
i recently installed the banshee media player using yum extender. Everytime i run it i get this error " a crash in mono-core-2.4.2.3-2.fc12 has been detected" how can i fix this problem?
View 2 Replies
View Related
Apr 30, 2009
Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies
View Related
Nov 10, 2010
Im trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies
View Related
Dec 31, 2010
Using IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message
Running the following;
evolution 2.28.3-0ubuntu10
Ubuntu 10.04.1 LTS
2.6.32-26-generic
View 4 Replies
View Related
Jan 6, 2010
My issue is with my Fedora 9 virtual machine that is running a Scalix mail server (host is F12).
The F9 VM was running fine until this morning when for no reason it crashed as I attempted to initiate a realVNC connection with it.
After a reboot users were unable to send mail to external addresses. When I try to check the network settings by selecting "System" -> "Administration" -> "Network", I receive the following error message:
Code:
View 1 Replies
View Related
Dec 2, 2010
Often when I run an upgrade to install new software or copy-paste instructions on commands on the terminal, I am getting the following error message:
error processing crossplatformui
What does this mean? I've been looking for codecs for video lan.
View 6 Replies
View Related
Sep 1, 2011
I've installed wine several times in ubuntu 11.04 but after the installation when i click on the wine icon it gives an warning message "The file 'wine' is not marked as executable. If this was downloaded or copied from an untrusted source, it may be dangerous to run. For more details, read about the executable bit."
View 1 Replies
View Related
Sep 29, 2010
compiling wine i got error Xlib/Xfree86 how can the package of it for RHEL 5.3
View 1 Replies
View Related
Jul 28, 2011
While installing linux, i got error message when i tried to create LV for /boot... i checked with my friends n they told me that /boot should be a standard partition... why is that, i asked them but they had no good explanation for it... could someone please explain me why do we create standard partition for /boot, why can't i use LV??? also i heard that its good practice to create separate partitions (LV or standard) for /, /home, swap & other major directories instead of 1 partition for all these.
View 7 Replies
View Related
Oct 1, 2010
Error message: GLIBC_2.0 not defined in file libc.so.6 with link time reference. What can I do?
View 1 Replies
View Related
Dec 1, 2010
When I am compiling from the src, I run the ./configure script. While there might be error sometimes, I 'd like to ask, what're the 3 stars( ***) in front of the msg stand for? Do they stand for critical errors?
View 9 Replies
View Related
Jul 16, 2011
I am quite new to Linux, so bear with me if I ask silly questions. For homework (and fun) purposes I needed to create a bootable USB of Fedora12. Which I did, successfully I might add However, when I rebooted the computer, I got this puzzling error message code...
What have I done wrong here?
View 5 Replies
View Related
Feb 16, 2011
When i am typing in the following command:
fdisk -l > ~/fsLabLog
i get a error message
disk /dev/dm-0 doesn't contain a valid partition table.
disk /dev/dm-1 doesn't contain a valid partition table.
View 1 Replies
View Related
Sep 30, 2010
I am migrating an application from HP-UX to Redhat Linux and I have some files of scripts. In one of the script files I have the line /pylive/smartPAY/spserver/scripts/sp.con which is the correct path and file name for an existing file. However I get the message "No such File or Directory/pylive/smartPAY/spserver/scripts/sp.con" The script worked fine in HP-UX, why not in Redhat Linux?
View 6 Replies
View Related
Jan 10, 2011
Our websever, Linux Debian with mysql, apache2, php 5 went down this saturday. Now this monday morning i must find out why this happened. I am looking for the the correct log files. We know that the server was available by using ping so it is (was) an application failure. We know that the our apache support team had changed the php to improve performance to apc.shm_size=192M (a couple a weeks ago) because couple a weeks ago we got a "Unable to allocate memory for pool" error message. Our server is running on a Vmware Server version 3 as virtual machine with sufficient CPU and RAM resources. Where and which log files must be checked to avoid future download times (it is our Company web page!!!!)
View 5 Replies
View Related
Aug 7, 2010
These days, I tried to compile my own kernel. Now, it seems work. However, when the kernel is booting, I always get the error message like below:
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
It looks that something is wrong with my acpi subsystem's configuration. But no matter How I reconfig it, this message still occurs.
My distribution is UBUNTU 10.04 LTS
original kernel with the distribution is 2.6.32
My own kernel is 2.6.35
View 7 Replies
View Related
Jan 14, 2010
solve this error "3c501 device eth0 does not seem to be present, delaying initialization".
View 3 Replies
View Related
Aug 19, 2010
On close down of kde4 I get the following error message;'Waiting for X server to shutdown kde4: fatal IO error; client killed error setting MTRR (base=0xf0000000, size=0x04000000, type=1) invalid argument (22)Because of this error I am currently closing down using "shutdown -h(-r) now"Could I please have some help on correcting the error.I have only a meagre experience with linux having only dabbled with it over the years
View 1 Replies
View Related
Dec 10, 2010
I installed Kubuntu 10.04 last couple days ago. Yesterday I installed some package software. After reboot, I had problem to login in GUI in Kubuntu. I tried few solutions in web I found,
Now It became more worse ! After BIOS - show this error message
error : unknown filesystem
grub rescue>
View 14 Replies
View Related
Jul 22, 2010
When I try to download the recent adobe flash 10.1 for my linux drive, I get the following error dialog box:
cannot get lock
cannot get the exclusive lock on the packaging backend. Please close any other legacy packaging tools that my be open.
Yum is locked by another application. The other process has the command line '/usr/bin/python /usr/share/yumex/yum_childtask.pyc 2 True False' (PID 2053)
I'm at a lost right now, I tried researching to find a possible reason, but I'm coming up short. I have a dual boot laptop with both fedora core 12 and windows7. Could there be a conflict between the two drives? I have the YUM extender on my linux drive performing the updates for me. I tried doing a YUM update via the terminal viewer, but I still get the same message.Any ideas as to why I'm getting this message, or how to fix this problem?
View 5 Replies
View Related
