CentOS 5 Networking :: The OS Locks Up When Attempting To Activate A Wireless Realtek Card (pci)
Sep 8, 2009
I just recently installed CentOS 5.3 and to make a long story short I found the entry for my wireless card under the network settings but when attempting to activate the card the system locks up. I have to reboot at that point as nothing responds (keyboard, mouse, etc..).
Running the command /sbin/lspci -v reveals the following about the wireless card:
01:00.0 Ethernet controller: Realtek Smeiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
View 3 Replies
ADVERTISEMENT
Mar 31, 2010
Broadcom sta driver is installed and listed in Hardware Drivers but will no activate.It did activate and run perfectly when booting from USB FLASH DRIVE running UNR on HP MINI it has a external networkcard power off switch on the front of it if that matters.
View 7 Replies
View Related
Dec 26, 2010
Running Linux mint 10 After the installation the wireless connection worked but it was very weak and intermittent. The icon would show 1 bar or none. iwconfig showed the rate at 1Mb/s. The same card worked fine in windows and on a 32bit version of linux. Installed new driver from realtek. Now the iwconfig readings look good and the icons shows 2 and sometimes 3 bars. But it will not connect at all! I even turned off all security on my router but it would not connect.
View 14 Replies
View Related
Sep 12, 2010
I have a Toshiba Satellite series laptop, i get ubuntu on it, all works well but there's a problem, my wireless card doesn't work, it doesn't show me the aviable wireless network, my Wireless Card is an Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) but it works in windows. I used Ubuntu 8.04.4 LTS. When i run these codes that's what it shows:
[Code]....
View 4 Replies
View Related
Oct 12, 2010
I am trying to install EDUP 802.11n Wireless USB Install (RTL8188SU) on my recently installed ubuntu platform and I need a driver for it. I downloaded the one from the Realtec website and I got a bunch of files that I have no idea what to do with them. (h[URL]... I am compleatly new at Linux and I have no idea how to install anything. I am pretty nifty with Windows but this is my first time trying Ubuntu and Linux. So can I have some step by step guide to install this. I am good at following clear instructions correctly.
Aditional Info: I tired the hardware thing already or whatever its called and only NVIDIA drivers are there and my USB is not recornized because it needs a driver.
View 9 Replies
View Related
Aug 23, 2010
I've done some research for CentOS and Linux support in general for this card, and I haven't found the answer I'm looking for. Does anyone use this card in a system of theirs, and, if so, how easy was it to set up? It's on an Asus M4A785T-M/CSM motherboard that I'm looking to purchase (Newegg link here for reference). I've seen a lot of Realtek cards have zero problems in Linux before, but I know each chipset is different.
View 4 Replies
View Related
Mar 7, 2009
I have downloaded and installed Fedora 10.Now I am setting up the network and in the 'network configuration' it finds the wireless device (ralink) in the 'hardware' section of the configuration - I set this to eth0 (it originally set itself to wan0 and I still had the same problems, now it doesn't give me the option to put it back to wan0).Now I goto the devices tab and try to set up the device with eth0 - which it seems to find.But when I goto activate the device it tells me that eth0 cannot be found
View 2 Replies
View Related
Jan 15, 2010
I have install 64bit version of Fedora 12 on a new Dell Inspiron 1545 with a Dell 1397 wireless card. It actually uses a Broadcom BCM4312 chip.
I have install the following rpms:
Code:
broadcom-wl-5.10.91.9.3-1.fc12.noarch
kmod-wl-2.6.31.9-174.fc12.x86_64-5.10.91.9.3-3.fc12.11.x86_64
kmod-wl-5.10.91.9.3-3.fc12.11.x86_64
code....
what I do not understand is the state of the card as unavailable. how I can activate this card?
View 2 Replies
View Related
Jul 27, 2010
I've been trying to get Security Spin up and running (after having tried unsuccessfully with knoppix STD). I need to be able to connect to my home network, or hell any wireless network.I've tried using iwconfig wlan0 as well as the options in the Network Configuration panel as well as other related panels. I'm able to change and set up profiles for the wireless card, but not to activate them. The button just isn't clickable.If it helps, I'm running Security Spin from a unetbootin usb drive. The wireless card is identified by the system as "Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection" .
View 2 Replies
View Related
Jan 11, 2010
The card is recognized by Ubuntu 9.10 and I have it in the network manager. I followed one tutorial about creating an ad-hoc network and all looked good, until I actually wanted to connect (or to be more precise, my machine is a host for other computers). The wireless icon just loops endlessly, without connecting and eventually I get "Wireless network - disconnected" message.
So, the main issue here is - connecting! I just can't. Also if you know/have some good tutorial for ad-hoc,
Code:
ivan@ivan-desktop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"internat3"
[Code]...
View 2 Replies
View Related
Feb 12, 2010
this isnt happening on ubuntu but I think this is more or less a kernel problem that could happen with any flavor. After a new install off of a live cd my wireless card is not picking up any signals...i was able to use wireless while using the live cd but now after it has been isntalled to the hard drive it is not working. even tried in terminal to manually look (iwlist wlan0 scan) but it isnt picking up the signal
View 2 Replies
View Related
Feb 11, 2011
I'm using Kubuntu 10.04.2 LTS on a Bangho laptop. Kernel 2.6.32-28-generic i686. My card is: Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter iwconfig wlan0 gives me:
Code:
wlan0 IEEE 802.11bg ESSID:"Default_WLAN"
Mode:Managed Frequency:2.442 GHz Access Point: 00:06:4F:8D:B9:AF
Bit Rate=1 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr: off Fragment thr: off
[Code]...
Usually when this happens, for 10 or 20 seconds it appears to be connected (i.e. the heart symbol is there) but I can't ping google or my router, then it "realizes" it's disconnected. It takes one or two attempts to reconnect successfully by pressing the "active" button. Meanwhile throughout the disconnections and re-connections the signal is very strong (98%).
I had the same problem with my old access point, at first I thought it was the cheap/old hardware, so now I bought an "ENCORE ENDSL-A2+WIGX2 | ADSL 2+ Modem with 4 Port Wireless Router". The problem persists only with a stronger signal.
View 1 Replies
View Related
Jan 20, 2010
I've got a Puppy system running version 4.3.0 that I'm trying to get on the home network. I'm using a D-Link DWA-130 (H/W revision C), which has a Realtek RTL8192U chipset. I got the drivers off of D-Link's website, and they compiled and installed just fine, but when either a) I try to connect to the network, or b) while I'm browsing the web, the system locks up completely. No mouse, no keyboard, no Ctrl-Alt-Bksp to get out of X, nothing.
I'll outline my steps: Install Puppy using a "Full" HDD install (not "Frugal"). Copy the "devx_430.sfs" file (which I got from the Puppy website) from a thumb drive to the "my-documents" folder (although the exact location proabably doesn't matter). Mount it, cd to the mounted directory and execute "cp -a --remove-destination ./* /" and "sync". Copy the kernel source for 2.6.30.5 ("kernel_src-2.6.30.5-patched.sfs4.sfs") to the same directory. Mount it and execute the same commands as before. Copy the folder containing the RTL8192U drivers ("rtl8192u_linux_2.6.0006.1031.2008") to the root directory (i.e. "/"). cd to the folder in the terminal and run "make", "make install".Reboot the machine. Set up networking using the Puppy Internet Connection Wizard. HERE'S WHERE IT SCREWS UP: It connects, but after a while (e.g. just after logging into LQ through it, as a test) it freezes the entire system.
I have to do a hard reboot ("panic button"), then a soft reboot (for some odd reason the usb module won't load after a hard reboot, so the mouse won't work) to get the system working again, only to have it lock up again once it connects to the network.
Are these drivers broken? Outdated? Is there anything I can do to fix this? EDIT: I should add that this only occurs when the adapter is plugged in. If I boot the system with it unplugged, it works fine (probably because it never loads the kernel module).
View 11 Replies
View Related
Jul 12, 2010
my wireless home network is not recognized by my network card (RealTek RTL8190 mini PCI). The post was as follows: "I am using a new computer with Windows 7 , Athlon quad core 2.60 64 bit, 8GB RAM. Internet conection works fine with ethernet but ubuntu does not see my wireless network. card (RealTek RTL 8190 ID: 10ec:8190). Have searched this forum but unable to come up with a fix. I was looking for windows XP drivers to use Ndiswrapper but could not find a list of .inf files. My network is OK and works perfectly in windows and with my 2 laptops. Can anyone point me in the right direction? Additional info: install was done within Windows using WUBI to a separate partition on my HDD. I am new to this and thouroughly confused as to the procedure for installing the drivers if they are in fact available."
I am very frustrated in that I would like to use Ubuntu 10.04 but it is useless without internet connectability. I am new to linux and do not understand where to get the appropriate drivers or how to install them. I wish someone would answer this post and either give me a clue what to do or just say "give up" and uninstall ubunutu.
View 2 Replies
View Related
Mar 26, 2011
How can I get Suse 11.4 to see my wireless adaptor? Would love to get this working so I don't have to upgrade my old XP OS to Win 7.
linux@linux:~> /sbin/lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
Subsystem: CLEVO/KAPOK Computer Device [1558:4101]
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02)
Subsystem: CLEVO/KAPOK Computer Device [1558:4101]
Kernel driver in use: i915 .....
View 9 Replies
View Related
Nov 1, 2010
I have Slackware(x32) 13.1 installed on my computer. Everything runs just fine except it doesn't seem my wireless card.I looked around and found a driver on the Realtek website. But, after I installed it, linux wouldn't boot. It would just hang. The driver did help my get the card detected, though.
On lspci, I found:
02:00.0 [Realtek company name here] RTL8101E/RTL8102E
03:00.0 [Realtek company name here] Device 8172
On windows, it said I had RTL8191SE. I am confused as to which card I have and which driver I need.I reinstalled the driver and rebooted. I then turned off my ether card via bios. Then I rebooted. Linux then booted just perfectly. However, I couldn't get the wireless to work. I was freaking and then left to go do something else with my hands. Then I realized I had the card turned off.
I mentally punched myself. >.>
View 2 Replies
View Related
Nov 7, 2010
I have just downloaded realtek rtl98192se for my wireless pci card. after extracting the file, the user guide states to go to the top level of the directory and execute the command 'make' to compile the driver
I have done so but I get the error: make: *** /lib/modules/2.6.18-194.el5/build: No such file or directory. Stop. Make: *** [all] Error 2
View 9 Replies
View Related
Aug 24, 2010
It is detecting the wireless networks in the surrounding area but it isn't connecting.
View 11 Replies
View Related
Aug 27, 2010
I am having trouble getting a Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller to work on openSuSE 11.3. Most of the data for the problem is in this pastebin of the output of Framp's collectNWData.sh. I have also downloaded drivers for this card as detailed below.
Code:
stephen@linux-75on:~> zypper se -r drivers:nic -i
Loading repository data...
Reading installed packages...
Also, here is the more complete output of /usr/sbin/iwlist scan:
Code:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
pan0 Interface doesn't support scanning.
View 9 Replies
View Related
Aug 6, 2011
Ok a little confused here. I got this working in f14 no problems but anyway. I have a wireless usb net card with a realtek 8192su chipset and of course it is not recognized.Dloaded driver from realtek unzipped tarball. Ran make clean and no errors then ran make all and this is what I get same with make or make install.
Code:
[root@donnie rtl8712]# make all
make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.38.6-26.rc1.fc15.i686/build M=/usr
[code]....
View 3 Replies
View Related
May 28, 2010
I am not very experienced using Linux but I never had big problems with Ubuntu. Now I am busy writing my PhD thesis and therefore I had to install CentOS to use one lousy program that I could not get to work under Ubuntu. However, it seems to be quite fine and it is working well besides one fact: The network card stopped working. In the beginning it was working fine although the speed was only on the level of 100mbit. The switch and the LED on the card indicated gbit connection, though. I tried to install the driver for the 8168 card which reduced the card to 100mbit (indicated by the LED on the switch and the card).
Ethtool indicated it was gbit capable but I couldn't activate it. After reading more and more I figured I have to use the 8169 driver again and live with the 100mbit. Unfortunately, after uninstalling the old driver and reinstalling the driver 8169 the network isn't working at all anymore. The network-manager displays the card as inactive and when I try to turn it on it complains about the wrong mac address, which I am not able to change to the proper one. I am using CentOS 5.5 with the latest updates.
View 17 Replies
View Related
Mar 9, 2011
I am having a terrible time getting any networking to work with a new RedHat Enterprise 6 64 bit install. I am installing on an HP Proliant DL380G7.I have downloaded the driver - hp-netxtreme2-6.2.23-2.src.rpm from the HP website.Followed directions and did the following:1.Build Environment Setup - installed redhat-rpm-config and kernel-devel2.Installed the source (hp-netxtreme) rpm.3. Build the Binary RPM - installed rpm-build and ran the following:rpmbuild -bb /root/rpmbuild/SPECS/hp-netxtreme2.specIt runs through the build process and near the end I get the following:make -C /lib/modules/2.6.3271.el6.x86_64/build UBDIRS=/root/rpmbuild/BUILD/hpnetxtreme26.2.23/obj/default/bnx2-2.0.23b/src modulesexpr: syntax erromake[2]: Entering directory '/usr/src/kernels/2.6.32-71.el6.x86_64'/usr/src/kernels/2.6.32-1.el6.x86_64/arch/x86/makefile:81: stack protector enabled but no compiler supportmake[2]: gcc: command not found
make [3]: ***[/root/rpmbuild/BUILD/hp-netxtreme2-6.2.23/obj/default/bnx2-2.0.23b/src/bnx2.o] Error 127make[2]: ***[_module_/root/rpmbuild/BUILD/hp-netxtreme2-6.2.23/obj/default/bnx2-2.0.23b/src] Error 2make[2]: Leaving directory '/usr/src/kernels/2.6.32-71.el6.x86_64'
[code].....
View 2 Replies
View Related
May 25, 2010
I have just completed installing Ubuntu 10.04 LTS. When I click on teh network manager it shows:
Wired Network
disconnected
Wireless Network (Intel PRO/Wireless 2200BG [Calexico2])
wireless is disabled
Wireless Network (Manufacturer RealTek RTL8187 RTL8187 Wireless)
[Code]....
I want to be able to connect through the RealTek wireless adapted.
View 3 Replies
View Related
Apr 28, 2009
I have a desktop PC with CentOS 5 installed, and a wireless card that's working well via NetworkManager.
How would I configure the wireless card statically, e. g. by editing /etc/sysconfig/network-scripts/ifcfg-wlan0?
This would be something like :
DEVICE=wlan0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.1.252
NETMASK=255.255.255.0
ESSID=my_essid
CHANNEL=3
But I don't know how to define the WEP key here.
View 2 Replies
View Related
Aug 4, 2009
I have a Sprint U760 air card that apparently works under Linux. Sprint has a guide: "Wireless Mobile Broadband Setup Guide for Linux OS" that I am using to setup the air card. When I go through the procedure in the manual for "Setting Up PPP Using KPPP" the last task is to query the modem to see if Linux recognizes it. When I do the query I get a response "unable to open modem". I have tried going back through the PPP setup but still get the same response.
View 8 Replies
View Related
Aug 12, 2009
installing my wireless card Atheros AR9285.I have tried to get it working with both compat wireless - Ath9k driver but I dont know exactly how to do.I have also tried to get it to work with ndiswrapper, but it is really tricky because nothing is available in centos like precompiled ndiswrapper.I used to work with Arch Linux so everything in Centos is totally new to me and I don�t understand a thing:I need to get it to work as soon as possible.What I have read the should go to just "activate" the ath9k driver with my card and it would work,
View 3 Replies
View Related
Feb 16, 2010
I've search for info on configuring ndiswrapper for the BCM4318 Wireless card. All I've been able to find is information on Ubuntu and Debian, which don't seem to use the same methods for configuration. Has anyone configured ndiswrapper for this or any wireless card on CentOS 5? I've installed 5.4.
View 7 Replies
View Related
Sep 11, 2010
I recently purchased the Linksys WMP45G wireless card for my desktop (as my router is too far for ethernet cable). I can't get it to work. The NetworkManager icon doesn't appear in the upper-right corner, despite being up-and-running. Here is some output:
[root@cwatson ~]$ uname -a
Linux cwatson.homeunix.net 2.6.18-194.11.1.el5.centos.plus #1 SMP Wed Aug 11 08:19:38 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
[root@cwatson ~]$ yum list installed "Network*"
[code]....
View 7 Replies
View Related
Feb 16, 2010
I have downloaded the driver installed it, and it works fine. But i can't get to turn it off. I do have the ability to unload the driver's kernel modules and the sysyem does not see my card after that. That's ok, but i'm thinking it still uses my battery power. The wifi led is always on no matter what i do. The fn+<wifi key> doesn't to anything.
View 8 Replies
View Related
May 21, 2010
I have installed 9.04 ( I currently have it on dual boot with Windows XP) and my problem is that I have no internet connection. I have a Motorola modem with a Realtek RTL8139 Family Fast Ethernet NIC network card ( it's a wired connection, btw) When I plug in the cable, there's a little animation, but after a while I get the message: Wired connection is not active (or something like that) Here's what I did so far:
1) I ticked the Wake-On-Lan option in XP, since I read it in the forums that I could solve my problem. It did not
2) I turned off my modem, rebooted my system.
3) I deleted the Auto Ethernet network, and plugged in the cable again...no use.
4) I did an ifconfig, since I know that is what you guys really want
evajulia@Derek:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:18:f3:ab:2b:3a
inet6 addr: fe80::218:f3ff:feab:2b3a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
View 9 Replies
View Related
