I can't connect to my "counter-strike Source server". I know it is running, as I run it thru SCREEN and no connections seems to reach it. I use a small modified script I found some where on this site and it is like this;I do believe the problem is in my use of ipatbles and UDp but haven't found any use of the command that has worked.
View 2 RepliesI setup the server just find with Metamod and amxmodx, everything works other than it won't let my server connect outside of my lan. I forwarded every single necessary port for HLDS and steam on my DIR-655 xtreme n-gigabit router, most up to date firmware as well.
I've tried numerous ways of of starting up my server
Here is what happens:
Code:
Heres another, I try connecting with just a port and it runs but its only on local, in the servers list the ip is 192.168.0.192:
Code:
i have fedora11 in my system i have tried to install to counter strike in my system.and it get proper way. but when i start it , it starts well but it gets freezes after Parsing Game resources Bar(status ) bar during loading and a error generated that my gecko installer wants to install html parser
now what to do?
First of all, This is my first post in the forums, so - Hello all, nice to meet you. This is my first time with Ubuntu, and so, ran into a lot of problems. This problem is in installing counter strike. I know that there are a lot of guides and FAQ's online that give you lots of help on that, but I ran into an unique problem.
I installed the non-steam version of Counter Strike ( using wine ofcourse ). It created a shortcut in my desktop and I launch the counter strike game. I enter my cd key and then I select a profile, select a map, select the bots and then, it starts loading. After that, it stops half way and then it quits.
my friend is having major sound problems when she is trying to play counter strike 1.6 on her ubuntu (latest version). she can only play it trough wine emulator and wine itself is updated to latest version.
from what she told me and i seen - most of the times she doesn't have sound at all. can you maybe point me on what should we do about it? i googled some "solutions" like disabling oss and etc. but it doesn't make any difference (killall pulseaudio for example removes all of her sound like videos sound and etc.).
I'm a new debian user. I install a Debian in Virtualbox, and try to connect to the source list to update, but it can't connect to the server, while network and internet connection works. This is my sources.list
deb http://ftp.rediris.es/debian/ squeeze main
deb-src http://ftp.rediris.es/debian/ squeeze main
deb http://security.debian.org/ squeeze/updates main
deb-src http://security.debian.org/ squeeze/updates main
deb http://ftp.rediris.es/debian/ squeeze-updates main
deb-src http://ftp.rediris.es/debian/ squeeze-updates main
Any ideas why i cant connect to the internet with this server.
View 2 Replies View RelatedI tried to connect to the server with vncviewer Therefor I installed vnc-ltsp-config (repo EPEL) I configured /etc/sysconfig/vncservers
VNCSERVERS="9:roland"
VNCSERVERARGS[9]="-geometry 1600x900 -localhost"
I'm trying to set up a server for an NPO who connects to the Internet through an internal proxy (Websense). I can't access the Internet unless through the proxy.
Since it's a server I did not install a GUI so I'm wondering how to connect the new server to said proxy server. I have the IP address, port number and username-password for the proxy server. The new server has a static IP address and is ready too go!
I usually used freebsd. Now I decided to try linux and selected CentOS 5.5. I installed it on my notebook Acer Aspire 5930G (I tried both i386 and x86_64 versions) and I have problems with cable networking. I selected static network configuration during install. Internet access is working via NAT on freebsd server.
I can ping anything in my LAN, I can ping any host in internet, nslookup works fine, but nothing else isn't working. I can't wget even in my LAN, can't connect to FTP server in my LAN etc. The same with internet hosts. Iptables turned off, iptables -l shows that all chains are in ACCEPT. SElinux turned off. NAT for accessing internet works fine - when I reboot to windows 7 with same network config internet is working. I guess this could be problem with driver for my NIC - Marvell Yukon 88E8071 PCI-E Gigabit Ethernet. But I can't change it on notebook :)
I have 2 server behind the netgear router on my network . win2k3 and CentOS development server, I have port forarded 80 to win2k3 server which i can access over the internet and is accessable. However I can SSH CentOS machine and portforwarded 8080 and 82 for web access, I can't access via any of the port, browsers says UNABLE TO CONNECT.. there is no firewall in CentOS machine.
View 1 Replies View RelatedI'm trying to open up some ports to connect via vnc to a server running Centos 5.5. I've edited /etc/sysconfig/iptables everything *looks* fine, but I still can't seem to get access to the port I've opened (I added some newlines for clarity between commands):
[Code]....
I'm building my first server to use as a Counter Strike: Source game server that I'm hoping will host 24-48 players. I plan on using Ubuntu Server 10.04 64bit. I also plan on using it as my own personal file server. I'm looking at building it with the Intel Xeon E3110 3.0GHz, 1333MHz, Wolfdale, dual-core processor (LGA 775) as it's cheap and from what I've read, should fit my needs.
Initially I want to build the server with a single SSD drive just to get the system up and running and then later I wanna add another SSD to mirror the original with RAID 1. Then I want to add 4 large capacity SATA drives in a RAID 10 for storage (after I've gotten everything else set up).
Can anyone recommend a motherboard that will fit this setup? I'd really like a motherboard that has built in VGA graphics so I don't have to buy a graphics card just for the install (as I plan on using SSH after I get it up and running). I don't plan on using ECC memory as I need the memory to be fast (for the game server). Because this is my first build, I'm very new to installing/setting up RAID. Do any motherboards exist that have a built-in hardware RAID that will work with Ubuntu and let me do raid 1 and raid 10? Or will I have to get a SATA RAID card? Will hardware based RAID allow me to build a raid 1 array with a SSD drive that's already in use (my system drive) without having to reformat/re-partition?
I have a linux router box with ubuntu which routes internet for several people. There is no extra traffic shaping, so everybody can get the whole bandwidth when its free. What I would like to have is a real time traffic counter per ip, just like a program called "iptraf" but on a per-ip basis. Iptraf can only count on a per-connection basis and thus cannot display a bandwidth that a certain ip has taken (because a single ip can start several onnections). So a console program with text interface like iptraf would be perfect - does anybody know about such a program? After some googling I came to the conclusion that such a program does not exist (which must be wrong - i think that per-ip real time traffic flow information is the first thing every router owner would like to know).
View 2 Replies View RelatedWhenever I add a rule to iptables, all of the policy counters reset. The counters for each individual rule remain intact, however, the main counter resets. Here's what I mean:
Code:
[root] ~ # iptables -vL
Chain INPUT (policy ACCEPT 65M packets, 83G bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 50M packets, 30G bytes)
pkts bytes target prot opt in out source destination .....
Did anyone heard about or can suggest mabe a postfix serverside solution in order to insert a counter number into the subject line before the message is sent?
I mean something similar with helpdesk tickets, because I would like to create the possibility for the senders, to make further refference about a speciffic message using it's counter number provided by postfix server.
I installed the Centos 5.5 and after the Xen. After I put a virtual machine named VM01.Initially it worked properly, I tried everything and it worked.When rebooted, I had problems with the network.I have two network cards eth0 and eth1, but eth1 does not have any ip and I use only eth0.The error that appears is:
vif0.0: received packet with own address the source address
every time I try to connect to the ftp server I setup i am recieving this error Response:*** buffer overflow detected ***: /usr/sbin/vsftpd terminated Error:Could not connect to server
View 1 Replies View RelatedI have two Centos 5 servers one running Asterisk with PHP installed and another sever running as a MySql Database server, at the moment when I try run simple script to see if I can connect to the remote server I get the following error.Quote:Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
View 2 Replies View RelatedI've installed from the CD the Centos version 5.5. When I try to connect to Internet I can't because I received some errors. I've the Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller also a wireless slot (I've the wireless card DWL-G650+) When I turn on the pc and I go to "Ethernet Device", I see set: peth0 (Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) ETHERNET CONTROLLER) and also set "Bind to MAC address": fe:ff:ff:ff:ff:ff I've set manually the IP address (I'm under router). Status is "Active" but can't go on the Net. When I change to "eth0 (Intel EtherExpress/100 driver)...sometimes become "Active" an other times said that the MAC address is different or to check the cable because can't find the IP. What can I do?
View 5 Replies View RelatedDuring the install of my Centos server 5.3 i cam in trouble after setting the Static IP address, Gateway and DNS i cannot connect to the internet my own network is visable. When i start ifconfig my network is running.
View 7 Replies View RelatedPl can anyone guide me to connect centos 5.5 using ethernet port to ADSL Broadband modem which is configured in PPPoe mode?
View 19 Replies View RelatedI'm no expert on DHCP. My problem is that i have a CentOS 5.5 server on which i want to install a DHCP server. I have two NICs where eth0 has access to the internet and where eth1 should act as an DHCP server.
I have installed dhcpd and this is how my dhcpd.conf file looks like.
Code:
ifconfig looks like this
Code:
When i start dhcpd on eth1 i get no error messages but when i connect any devices to eth1 they don't get any IP. I cant find anything in any logs about devices trying to get an IP address. I dont have any firewall rules in iptables.
I must connect my apache server to a SQL Server 2008 and use the native instructions (mssql_connect)...in ubuntu this is provided by php5-sybase but in centos this rpm does't exists. How I can connect to SQL Server? I must compile php from source? Is There a way to use the freetds driver?
View 1 Replies View RelatedI have noticed that Linux Mint 9 does not have a 'Software Source' server for Ireland. This is odd since LM originates in Ireland.
View 1 Replies View RelatedTrying to get a handle on xen. I have installed Centos 5.3 and I have created one xen guest using default 192 address. I can access this guest no problem from the xen host/server but how do I setup a bridged (I assume) xen guest so it can be connected from any network within my domain, The xm host is network is 10.32.161.0
View 1 Replies View Relatedi have centos installed in a VMWare . i have a windows server 2008 in a vmware too. i want connect centos (client) with windows (server), using dns in windows server. how to be this?
View 2 Replies View RelatedI have installed CENTOS 5.0 .. IM new to this centos linux..
-->regarding the remote connection
how can i connect the server through remote from windows 7 ..graphical interface ?
how to install lamp or apache , php , mysql
can u guys provide me any link or book for as a beginner for centos ?.
My centos server was startup to command line mode (console), and I install desktop on that server. after that I set up vncserver from putty, and connect to it using vncviewer, but I can not get into the desktop environment in installed but xwindow desktop instead, and if I try to "startx" in the vncviewer, error occurs, what's wrong ?
View 1 Replies View Relatedphp can't connect mysql by 'localhost' but can connect by IP address:
[Code]...