i have fedora11 in my system i have tried to install to counter strike in my system.and it get proper way. but when i start it , it starts well but it gets freezes after Parsing Game resources Bar(status ) bar during loading and a error generated that my gecko installer wants to install html parser
now what to do?
my friend is having major sound problems when she is trying to play counter strike 1.6 on her ubuntu (latest version). she can only play it trough wine emulator and wine itself is updated to latest version.
from what she told me and i seen - most of the times she doesn't have sound at all. can you maybe point me on what should we do about it? i googled some "solutions" like disabling oss and etc. but it doesn't make any difference (killall pulseaudio for example removes all of her sound like videos sound and etc.).
I setup the server just find with Metamod and amxmodx, everything works other than it won't let my server connect outside of my lan. I forwarded every single necessary port for HLDS and steam on my DIR-655 xtreme n-gigabit router, most up to date firmware as well.
I've tried numerous ways of of starting up my server
Here is what happens:
Code:
Heres another, I try connecting with just a port and it runs but its only on local, in the servers list the ip is 192.168.0.192:
Code:
First of all, This is my first post in the forums, so - Hello all, nice to meet you. This is my first time with Ubuntu, and so, ran into a lot of problems. This problem is in installing counter strike. I know that there are a lot of guides and FAQ's online that give you lots of help on that, but I ran into an unique problem.
I installed the non-steam version of Counter Strike ( using wine ofcourse ). It created a shortcut in my desktop and I launch the counter strike game. I enter my cd key and then I select a profile, select a map, select the bots and then, it starts loading. After that, it stops half way and then it quits.
I can't connect to my "counter-strike Source server". I know it is running, as I run it thru SCREEN and no connections seems to reach it. I use a small modified script I found some where on this site and it is like this;I do believe the problem is in my use of ipatbles and UDp but haven't found any use of the command that has worked.
View 2 Replies View RelatedI had Windows 7 RC installed and F10 on the same machine. HP 6730s Intel Dual Core. Everything was working fine and I don't remember doing anything special when installing Fedora 10. I decided to install F11 from DVD, installation went fine but after rebooting all I get is "non-system disk error or disk error. replace and strike any key when ready". I couldn't find any relevant post in this forum and googling I found that this could be a disk starting to fail but I don't thing this is the case here. I'm trying to reinstall just now, I chose to install grub at /dev/sda (default), should it be /dev/sda1 ?
View 7 Replies View RelatedIt appears that my keyring manager has gone on strike. I did a "zupper up" today and ever since doing that, the computer has not asked me to enter my default keyring password when booting up. The only way for me to connect to my wireless is to enter the WPA security code every time and when loading Pidgin I have to enter all my passwords. This is very annoying!!!! I have deleted my default.keyring file, restarted and it is not asking me to enter a new password.
View 1 Replies View RelatedI am new to fedora and installed wine to see if I could get the sony reader software working (required to access sony bookstore from my sony ereader). Well the program did not work though it did create icons on my desktop. wine kept crashing and I said lets just get rid of it. I uninstalled wine via yum remove and nothing appeared to happen so I did rpm -qa |grep wine and saw lots of stuff. So I simply did yum remove wine* and then a rpm -qa |grep wine was empty. however wine is still under applications on my desktop and still has a category for programs--reader. I should also mention that while wine was installed I attempted to remove the reader via the wine uninstalller but a) wine gave a message of a core crash and b) all the uninstaller did was give me the option to reinstall the reader program. so now when I attempt to open an epub it tries with the sony reader software. I know I can just right click to use another program but for now I want wine gone completely from my pc and the sony program gone.
View 2 Replies View Relatedis it possible in C to use a counter as part of a variable name?
View 2 Replies View Relatedwhen I tried to install wine I got "Missing Dependency: wine-gecko is needed by package wine"so I looked for wine-gecko and download it but also when I tried to install it I got "Missing Dependency: wine-gecko is needed by package wine"it seems that I am in loop each package need the other what to do please?
View 1 Replies View RelatedIn the older version of firefox the tabs are right above the browser window. In this version there in the wrong place. It's counter-intuitive to not have it right above the browser window. How do put it back? Else, how do install the older firefox.
View 3 Replies View RelatedI have a linux router box with ubuntu which routes internet for several people. There is no extra traffic shaping, so everybody can get the whole bandwidth when its free. What I would like to have is a real time traffic counter per ip, just like a program called "iptraf" but on a per-ip basis. Iptraf can only count on a per-connection basis and thus cannot display a bandwidth that a certain ip has taken (because a single ip can start several onnections). So a console program with text interface like iptraf would be perfect - does anybody know about such a program? After some googling I came to the conclusion that such a program does not exist (which must be wrong - i think that per-ip real time traffic flow information is the first thing every router owner would like to know).
View 2 Replies View Relatedi am just starting a ubuntu server and i am trying to learn i have a script that runs ever hour and i would like to put a counter (count=count+) in a line if it is true and also if the counter reaches its value of 10 to reset the counter to zero
View 3 Replies View RelatedI am executing the following script using 'awk -f process.awk out' where 'out' is the input file which consists of 5000 sequences. Each time it takes one sequence, run the below program by creating a directory, run the mfold command within that directory, running another shell script 'final5' and redirect the output to a file from final5 shell. After that the directory is deleted, taking second sequence from 'out' and repeating this process. It is working well upto 1020 directories. From 1021 it is giving error. After executing this 1000 times, can we reset the counter to 1 in such a way it takes it as directory 1 and start this process for 1001 to 2000 sequences. Similarly I have to reset the counter to five times because input file contains 5000 seqeunces.
[Code]...
I'm building my first server to use as a Counter Strike: Source game server that I'm hoping will host 24-48 players. I plan on using Ubuntu Server 10.04 64bit. I also plan on using it as my own personal file server. I'm looking at building it with the Intel Xeon E3110 3.0GHz, 1333MHz, Wolfdale, dual-core processor (LGA 775) as it's cheap and from what I've read, should fit my needs.
Initially I want to build the server with a single SSD drive just to get the system up and running and then later I wanna add another SSD to mirror the original with RAID 1. Then I want to add 4 large capacity SATA drives in a RAID 10 for storage (after I've gotten everything else set up).
Can anyone recommend a motherboard that will fit this setup? I'd really like a motherboard that has built in VGA graphics so I don't have to buy a graphics card just for the install (as I plan on using SSH after I get it up and running). I don't plan on using ECC memory as I need the memory to be fast (for the game server). Because this is my first build, I'm very new to installing/setting up RAID. Do any motherboards exist that have a built-in hardware RAID that will work with Ubuntu and let me do raid 1 and raid 10? Or will I have to get a SATA RAID card? Will hardware based RAID allow me to build a raid 1 array with a SSD drive that's already in use (my system drive) without having to reformat/re-partition?
Whenever I add a rule to iptables, all of the policy counters reset. The counters for each individual rule remain intact, however, the main counter resets. Here's what I mean:
Code:
[root] ~ # iptables -vL
Chain INPUT (policy ACCEPT 65M packets, 83G bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 50M packets, 30G bytes)
pkts bytes target prot opt in out source destination .....
As stated in previous posts I've not long come back to linux, I was wondering if anyone can suggest a good lightweight download usage meter to help track how much of my monthly allowance I have used etc.Under windows I was using one that logged into the Bigpond site and would display usage, how much was left and how many days were left till the end of the billing period.I've done some searching but so far can't find anything similar for linux.
View 2 Replies View RelatedI'm converting pages in PDF to images in the following way: convert file.pdf out.jpg In this way I get in the current dir files with these names: out-0.jpg (first page), out-1.jpg (second page), out-2.jpg (third page) and so on. You can see the increment counter begins at 0. Can it be done to begin at 1, so I would get these names: out-1.jpg (first page), out-2.jpg (second page), out-3.jpg (third page)?
View 1 Replies View Relatedi'm running 11.2 kde 4.3. i'm having issues with both smplayer and vlc. first, when i play an audio cd through smplayer, it pauses every 14-15 second. by pause i mean that the sound and time counter stops, and i actually hear the disc drive make a sound, the *typical disc-read sound. i tried a few discs, in case it was a specific cd; same thing for all. i also looked through the preferences to see if there was a setting that addressed it; nothing i see seems to address the issue.
playing the same cds in kscd works fine. but kscd really sucks....excuse me, it really really sucks. with vlc, whenever i start vlc, it will appear in my taskbar, but there is no other sign of its existence besides this. no system tray icon, no gui or any other sign of its presence besides the taskbar.
I would like to share some files with my customers. I would like to be able to give them different passwords with different rights. I would like to know which customers have downloaded the files, how many times and from wich ip. I would like to let the customer download a file just a number of times.(optional) I would like to be able to upload from web (optional) And with a polite presentation to the customer.Does it exists? Yes. I'm asking for something better and I hope somebody used it and is still happy with it.
View 2 Replies View RelatedI work in a simulations environment. I'm trying to write a bash script that will read fields from a .csv file into an array, the first field being an identifiyng number and the second field being a corresponding url. There are about 1600 of these number/url combinations in the .csv file that i'm reading from. Once that is done i want it to parse a text file and match the number, when it has a match i want it to enter the corresponding url into a particular line in the text file. The script I have written (with the help of the people on this forum a while back) does this well, but now I have a lot more data to parse. I think the script itself is explanatory enough to see what i'm doing. What i would like to do is cut it down to one while loop nested inside another loop so that I don't have 1600 or so elif statements. I can't figure out how to increment the output of the array. for instance, the first cycle would find the number that matches ${record1[2]} and input the url stored in ${record1[3]}. the next cycle would match ${record1[4]} and input the url in ${record1[5]}, and so on, does that make sense? The code is below and a sample .csv and text file are attached.
[Code]...
Did anyone heard about or can suggest mabe a postfix serverside solution in order to insert a counter number into the subject line before the message is sent?
I mean something similar with helpdesk tickets, because I would like to create the possibility for the senders, to make further refference about a speciffic message using it's counter number provided by postfix server.
I opened KPackageKit in my new Fedora system. I want to get wine. The description says "A Windows 16/32/64 bit emulator". But wine stands for Wine Is Not an Emulator.
View 2 Replies View Relatedwhile trying to get a game to work on wine I was surprised to find out that the wine version that ships with sid is 1.0.1 released in October 2005. So I installed the latest release I found at [URL] like this :
dpkg -i wine_1.1.42~winehq1-1_amd64.deb
The install failed, I think because I hadn't remove the old wine version, and that's when the joy-ride started. Impossible to remove wine to restart properly. (apt-get remove libwine wine and apt-get -f install didn't) After some googling I tried this :
dpkg -i --force-depends wine_1.1.42~winehq1-1_amd64.deb
This did install the wine version I wanted, and the game ran fine after that. However the result was a borked apt-get. Tried to remove wine again with the above commands, resulting in apt-get failing to do so because it tried installing wine-unstable and reported errors similar to these : E: Could not perform immediate configuration on 'wine-unstable'. see man 5 apt.conf under APT::Immediate-Configure for details. (2)
How can I uninstall / purge wine and any wine installed windows programs?I've tried deleting .wine (hidden folder)but in /usr/bin/ there are a number of wine related files.And wine sub menu still appears in Applications menu
View 6 Replies View Relatedi want to install wine on rhel 5.plz send me wine installtion command.
View 1 Replies View Relatedmaybe my questions sounds funny: i'm looking for a very small (or better as small as necessary) distro which runs in a virtual box an starts wine.The reason is: we have new laptops in my school runnig windows7 64bit home and we have some software which runs only on WinXP. So why not take a virtualbox wich runs wine to start the old Software?
View 2 Replies View RelatedLot of questions about WINE... When I'm done I'm going to make a HOWTO so that others can do what I did It's hard work, but I'm nearly done.The last problem I'm having is the WINE menu on GNOME won't show up after a install of WINE from a .deb package (it usually does). This was after I compiled WINE from source and removed it with "make uninstall" and "rm -rf /.wine".So now I installed the WINE from a deb package and the Wine menu entry is not showing up.I've tried re-installing Wine and rebooting my PC but nothing seems to work.
View 3 Replies View RelatedI have a problem running a game on a fresh Slackware64 install.
Slack version is 13.37
I've followed alien bobs instructions for a multilib environment from here:[url]
And then used sbopkg to download and compile wine version 1.2.2, which went through just fine.
After that I grabbed cabextract from sbopkg and ran this: wget [url] sh winetricks d3dx9 To get the DX9.
But, when I try to run the game, this is the error I get:
Code:
The game it self ran perfectly on the 32 bit version of Slackware, tested with 13.0. So now I think I'm missing some libs or something, but I have no clue which.
I don't know if it's just my system, but after applying the latest Wine update, the mouse cursor in Wine windows is now purple/magenta/pink, whatever. Not a big problem, just annoying. I've looked through the various config files in ~home and /usr/share/wine, and can't find any parameter that might even remotely address this.
View 4 Replies View Related