I recently reinstalled Fedora 15 on my laptop and have been unable to get the wireless driver to work as it has before. I successfully installed the akmod-wl package from rpmfusion, built the akmod successfully, and rebooted with no success.
View 1 RepliesI have a problem with my laptop fedora 15 does not detect the wireless network target of Intel Centrino Advanced-N 6230 and Bluetooth 3.0.
View 2 Replies View RelatedI used to be able to connect to the wireless but recently Ubuntu has gone waywards on me.How do I find out what wireless hardware I have? How do I get the right driver for it?Currently I can identify the wireless but cannot connect. Connecting with Ethernet works.
View 4 Replies View RelatedRight so I just bought an Acer TimelineX with a Broadcom BCM43225 BCM43225 802.11b/g/n WiFi card. With this card I am not able to detect any wireless networks and after googling around I found out other people have had similar issues. But my problem is kind of unique in the sense that I'm using Backtrack as my Linux distribution (I'm not a blackhat or anything, more of an enthusiast with no malicious intentions) Also I'm not a God at Linux so if you have any solutions please be verbose! I tried the following: [URL] But the Makefile spits out a syntax error. (Makefile:29: *** missing separator. Stop.)
[Code]....
I am using Linux Mint 8 Helena x64 Edition on Dell Studio 15 laptop which has Dell 1520 Wireless-N Mini Card. It does work when I boot from Live CD of Helena, connect to a wired network and download & install the proprietary drivers when prompted. But on the installed system, I am unable to activate the Broadcom STA driver. I tried completely removing and then reinstalling bcmwl-kernel-source and dkms packages from package manager.When I go to Administration -> Hardware Drivers and click on Activate for Broadcom driver, at first there used to be a window which said Downloading and it used to go away after few seconds and nothing used to happen. Then I installed few updates. At the time of writing, I have installed all the available updates. Now after clicking on Activate, I get this error :
Code:
Sorry, installation of this driver failed.
Please have a look at the log file for detains: /var/log/jockey.log
[code]....
for over at week i have been trying to get my wireless card to work now. If i open Additional drivers, the non proprietary driver seems to be working and active. If i deactivate that and use the STA driver instead, it says active, but currently not in use. When i use the non proprietary driver, i can check mark on 'activate wireless', but nothing happens. When i use the STA driver there are no wireless options. I'm not sure if its important, but when i do "sudo lshw -C network" when the STA driver is active but not in use, the network status changes from 'disabled' to 'unclaimed'. When i came here, i tried to install "firmware-b43-lpphy-installer" as the sticky said i should, but the installation fails. It says my card is not supported: "Not supported card here (PCI id 14e4:4727)!"
[Code]...
I have Ubuntu 10.04 installed and can browse the internet via cable, but wireless isnt working. My wireless driver is "Broadcom 802.11b/g WLAN".
In the windows device manager, I found the corresponding inf file to be oem20.inf which I tried to install it through "Setup Windows Driver" but it gave an error saying invalid driver. I also tried installing the Broadcom STA driver, but that didnot help.
I am dual booting with Windows 7, and i installed ubuntu through the windows wubi installer. My laptop is HP Pavilion dv4. I have installed the regular Ubuntu desktop and have made all upgrades. The results from lspci command i have added below.
gowda@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[Code].....
Wireless networking doesn't seem to work. When I try to create a new network interface with system-config-network, my wireless card doesn't show up. The following comes from dmesg:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[Code]...
I saw a post about this elsewhere and downloaded some firmware drives from [URL] and installed then. But, I'm really out of my league when it comes to this kind of stuff.
I am a linux newbie, I spent more than 3 days trying to set up the drivers for my Intersil Prism 2 Wi-Fi adapter on CentOS 5.5. While trying to Make the driver source I receive errors of missing libraries. Is the hostap driver included in the Centos Kernel? I tried with insmod hostap but it didn't work..? Is there a kernel patch with the hostap drivers? I will be glad if someone can give me ideas or directions for setting up the driver properly.
View 1 Replies View Related1. Installed a fresh 10.10 and upgraded all packages (via Ethernet).
2. Downloaded latest drivers from ASUS webiste (DPO_RT3070_LinuxSTA_V2.3.0.2_20100422)
3. Unpacked and tried to compile:
The wireless card is working with the driver rt2870sta, but I've read not all the capabilities of the device is unleash unless the native driver is used.
Have just installed ubuntu 11.04 on an old laptop. I have US robotics 5410 card for wirelss however I am unable to get my wireless to work.
I searched the forum and found this thread - [url] Unfortunately I cannot find '/acx' directory and I am unable to create it.
I am trying to get the wireless working on a fresh install of F13 on my HP probook 6450b. The wireless button above my keyboard is amber, when I press it i see the following in /var/log/messages :Quote:ep 29 11:32:43 localhost kernel: atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).Sep 29 11:32:43 localhost kernel: atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it
View 9 Replies View RelatedI just got my new sager p150hm and everything is great, but i can not get the wireless to work in ubuntu. i've been poking in the dark for a good 8 hours total and have made very little progress so far. As I said in the title the card is a bigfoot killer wirless-n which is based on an athos chip. so far i have tried to install the latest compat-wireless package per command line, which failed, so i installed it through apt, which worked, but didn't fix the problem. next i installed the linux-firmware package which didn't do anything either. here is some info on what's what
lspci:
Code:
00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
[Code].....
Currently I'm having trouble connecting to the guest wireless network at my work. I've read through a couple threads that seem similar to my problem. I tried going through the terminal window and following the instructions that was offered to others. I'm just wondering if my hardware is different, if I need drivers, if my permissions aren't correct.
1. I recently received a Sony Vaio laptop model # VGN-FE770G from a friend, and I'm enjoying running Ubuntu.
2. I followed another thread that suggested to change some lines in /etc/network/interfaces, but I don't have permission to edit this file. I don't really have the need to set up multiple users on my laptop, so how can I change my permissions to root? (Or is it a good idea even?) Should I log in as root?
3. How can I set my laptop up to be flexible with network selections, using hardware: (built-in camera and microphone for example), and useful applications?
I ran "ifconfig -a" and this is what I got.
Quote:
eth0 Link encap:Ethernet HWaddr 00:13:a9:48:c3:00
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[Code]....
No wireless networking. The ethernet works fine, and the wireless interface itself works well in Windows 7 (dual boot). Tried: Ndiswrapper, notoriously quirky, does not seem to work with the XP driver (the oldest driver available for the RTL8191SE). The linux driver offered on the manufacturer's website lacks any installation instructions. I have no clue how to install a linux driver. SUSE seems to have two network managers that are constantly complaining about control: Network Manager and Yast. Neither are great and I am left missing my Ubuntu.
However, my audio only seems to work on SUSE. I have tried almost every distro on this machine. Ubuntu lacked sound and wireless, Fedora played startup sounds, but would not play an mp3 or wav file (fiddling with the mixer did not help). And Fedora also lacked wireless support. PCLinuxOS, my favorite, lacked sound and wireless. Tried some oldies too. ELE, DSL, Puppy, Ubuntu Netbook remix, Vector, Browserpuppy, Crunchbang, Cruncheee (just for experimental sakes) and probably others I am not remembering. So far, installing a free linux distro has cost me 14 dvd-R's and countless hours of installing, reformatting and reinstalling. Part of me really wanted crunchbang to work, as I love the minimalism and blacked-out theme.
I need wireless network access. The wireless light remains red in Linux and pressing the key does nothing to start the device. In Windows 7 it always lights white and works perfectly. Why hasn't SUSE adopted a gui for ndiswrapper? Other distros have it. Why is my brand new laptop, which is by no means abnormal in make or configuration, not 100% supported natively by any Linux distro? I just updated to the new kernel yesterday. So I should be running the most modern operating system available. Yet good-ol Windows 7 is my only fully functional environment.
Recently I have installed Fedora 14 on my other laptop. It's a dual boot with Windows 7. Everything worked perfectly fine, networking included, until my friend didn't accidently turned off the wireless by pressing a wireless button on the laptop. Since then the wireless on Fedora doesn't work. It does on Windows thought. I've tried restarting the laptop few times, but the wireless still doesn't want to work again.
View 2 Replies View RelatedI just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
My new netbook, Acer Aspire One 533, has a Broadcom wireless card, which lspci identifies as BCM 4313. Having spent a lot of time trying to make this work in Fedora 14 I went to IRC on #bcm-users where I was told that I probably need brcm80211. The only information I can find about this in Fedora is a list thread at http://lists.fedoraproject.org/piper...er/002728.html. It would seem that if this is still not available I must try to build compat-wireless, which sounds pretty scarey. Is there any way I can get the brcm80211 driver? I know that there will be an associated risk, but a netbook without a wireless connection is fairly useless, and I hate to have to depend on Windows.
View 10 Replies View RelatedI've been trying to install the network adapter for the ar9285 driver using compat-wireless-2.6.32.16.tar.bz2 found at [URL] The commands I run after extracting are:
cd ~/Desktop
cd compat-wireless*
scripts/driver-select ath9k
Then after typing scripts/driver-select ath9k. This happens:
Processing new driver-select request...
Backing up makefile: Makefile.bk
Backing up makefile: drivers/net/wireless/Makefile.bk
scripts/driver-select: line 73: perl: command not found
[code]...
i am new using linux i install fedora 13 in dell mini 10 and i want to how i find and install the drivers for my laptop. I tried Ubuntu the last time and it has some hardware detection but i dont know how it made in fedora
View 5 Replies View RelatedWith any download that i start (whether ftp/http/bittorrent/etc..) I get download speeds of no more than about 100 KiB/s...which is decent, but I usually I know my internet speed is max at about 600 KiB/s. If I go to Network Mananger (while a download is in progress), and click on my wireless network, it will disconnect, then reconnect, and I'll get download speeds of up around 600 KiB/s for a period of about 20-30seconds...then, I'm back down to the 50 KiB/s - 100 KiB/s.
Fedora can download at max speed for a little bit, but then goes down to about 100KiB/s for the rest of time (until I disconnect and reconnect again). Why does this happen, and how can I get my speed to stay at maximum potential? Also, Fedora 10 recognized my wireless network card when i had installed F10. But I'm worried that the best driver wasn't used for it. I've found my actual driver that I used on windows vista/xp, and installed that via ndiswrapper, but i don't think that ndiswrapper disabled my old driver... am i right about this? Maybe a solution to my problem would be to disable the driver that came preinstalled on F10, so it can use my newly installed one instead?
I have a Netgear WG511GE PCMCIA card, and a driver from the original installation disk. I used an ndiswrapper-utils gui called ndisgtk to install the driver. I then do the following to verify an installation:
[Code]....
Unfortunately, when I put the PCMCIA card in, nothing happens. On Windows, a green light flashes even if the card is not connected to any network. At first I thought this might be a hardware issue, so I did #lspci and got:
[Code]....
Lo and behold, when I put a different unbranded Wireless PC Card in it works. I'm no expert in Networks, but to me this suggests a driver problem (i.e. the card is physically detected it just won't work). However, the correct driver was installed with ndisgtk and this was verified with #ndiswrapper -l, hence the confusion.
I'd be grateful if anyone else has had this problem/knows of this problem and is willing to share the solution with me/point me in the right direction. So far, Google has returned a few posts from a few years ago talking about patching kernels and manually building files etc (just before Prism54 became integrated into the Linux kernel).
I don't have a wired connection to internet. I have only a wifi connection. Is there any I could download a driver and install or myself in fedora 14??
View 14 Replies View RelatedI've been experiencing a problem with Fedora in which when I enable Wireless in Fedora, Wireless networking does not work in windows. HOwever, when disabled, it works correctly. Windows claims it is "not able to find any networks to connect to"
EDIT: It seems that when wireless is disabled manually on fedora before shutdown, there are no problems in windows.
It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
View 1 Replies View RelatedHow To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?
Here's the new driver:
I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
can't get my wireless internet to work.I have a toshiba satellite laptop with a build in antheros wireless card. Heres the info on my card when I do lspci.Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)I'm completely clueless on how I get it to connect to the internet wirelessly I was able to connect to my router earlier but it wouldn't let me use the internet though. I was trying to follow instructions from other post and now I cant even connect to my router anymore.
View 1 Replies View RelatedWhen I try to connect to any Wireless Networks in Fedora, the option at the top of the screen is grayed out. I can only connect to VPN, a hidden network, or create a new wireless network. My wireless works fine on the Vista side, so I am a bit confused at this
View 5 Replies View RelatedI know theres a thread for this for fc9 but thats probably kind of outdated now. So I am trying to set up a wireless connection for a pc in my bedroom and just want something that will work out of the box.
View 2 Replies View Related