CentOS 5 Networking :: How To Public Page In Apache
Sep 28, 2009
I have installed the CentOS 5.3 on VMWare. Then I Have Installed Apache ,PHP , Mysql with the flowing Command :
yum install httpd
yum install php
yum install mysql
yum install mysql-server
yum install mysql-devel
yum install php-mysql
Then I tested my Web Server , Data Base server and PHP Whit Create A PHP Page that work to Mysql this Test is successfully. Next I ping my machine IP (192.168.6.131) and then Ping windows xp machine. Even I Ping My Linux machine in Windows XP. But when check the PHP Page Or Local host in Linux machine whit Browser (IE or FF in XP), Response (IE:) Cannot display the webpage or (FF:) The connection was reset.
i'm setting up apache on 5.3. i can access the apache test page without a problem from the server via URL... But i can't figure out how to access this page from another computer within the domain (for when i upload my home page.
i opened up my browser to surf the web and a page popped up i had never seen before.Apache 2 Test page powered by centos. Any address i put into my firefox browser won't come up and i'm stuck on this test page and,i can't locate it on my computer to remove it.How do i get rid of it and more importantly how did it get on my computer in the first place?
I've searched the forums (250 thread limit) for a fix on this, but all the questions seem unanswered or unrelated. My situation is this: I'm running Ubuntu x64 10.10 'Maverick'. I have a cablemodem connection for my Internet access. I have home network running on DD-WRT with the dreadful Linksys WRT54G series router.
My DD-WRT router is 192.168.1.1, subnet 255.255.255.0. My Linux box is 192.168.1.61, subnet 255.255.255.0.
I have a VyprVPN connection set up successfully on Linux. Mostly everything works great, speed's fine, latency is what I expect it to be. Except... I also run an SSH server to remotely admin the box at port 22, an Apache server running over SSL at port 7001, and a Transmission web client at port 7002 (only secured by basic HTTP realms auth). All of these things worked before I got the VPN working, I'm of course using NAT at the DD-WRT router.
The endresult I am looking for, is to have the security and protection of the VPN (even if it's only perceived) for everything I do on this machine -- EXCEPT on Apache, the Transmission web panel, and the SSH server, which I want to access from the outside world. I have no firewalls running or configured, not even iptables, not even the SPI firewall on DD-WRT. All connections to the aforementioned services from the outside world timeout coming in to the Linux box. They all work from inside my home network (182.168.1.0/24). In case it's needed, he's my routing:
My webserver accesses a backend mySQL server using CentOS5
The last week, I have been getting a "page Load Error" on my web server whilst others told me they are getting a "broken link" error when they try to access my web site. It has been working fine for the last 12 months until last week.
ADSL, modem and router okay according to service provider (verizon)
I can ping my IP address and my domain name.
# netstat -tap
shows http and https both processes running.
# service httpd restart no issues
I shut down firewall and tried again, but got the same "page load error".
I am running CentOS release 5.6 (Final) and have successfully installed PPTPD and this works great internally.
I want to access my Linux box remotely on the internet via my VPN tunnel. However I am not sure what I need to do on the Linux box to make this happen. My linux box is multihomed as follows
PSTN WWW <===========> ADSL Router Firewall <----------------> [eth1 192.168.x.x] Linux Box [eth0 172.16.x.x] <-----> to LAN
The desired topology is as shown.
VPN Client <------> Home ADSL Router <======= PSTN WWW =======> ADSL Router <------> eth1 Linux Box
1. The VPN is setup and bound to eth1 and eth0 and works well internally
2. IPSec, GRE and PPTP rules have been declared on the router which port map to eth1
However I am still unable to setup a VPN connection to Linux Box I suspect something hasn't been done or I have setup my NATing or IPTables correctly on the linux box.
I will try to explain a bit first about my network typology: I have one cent os 5.5 machine with 2 nics - external one 86.x.x.122 and internal one with 2 IPs: 192.168.1.1 and 89.x.x.121. The ideea is that I have a public subnet (86.x.x.120/29) of IPs which are routable only through 86.x.x.122 so I have a webserver hosted on a different machine with the IP of 89.x.x.122 and GW 89.x.x.121 - everything works perfectly fine, except that I cannot access from the internal network 192.168.1.0 / 24 the so called DMZ (roughly) - the 89.x.x.122.
What really makes me crazy is that I setup the IPtables rules correctly because I can access the webserver from the outside world but I cannot accessit from the internal network...
what I'm missing - why the 192.168.1.0/24 cannot see the 89.x.x.122 machine... What IPtables rules should I add?
I'm pretty new to Debian, and I'm trying to set up Apache 2, and I want to set the DocumentRoot to public_html in my home dir, but I run into some problems.
I tried to change this (/etc/apache2/sites-available/default): <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/ <Directory /> Options FollowSymLinks AllowOverride None .....
When I restart apache I get a 403 error, and when I change it back to its original, it works fine. I want to change the DocumentRoot so I can upload files via FTP to ~/public_html. ~/public_html has the mode 777.
When running Firefox, page loading is very slow (e.g. taking nearly a minute for a ..... video to start; even gmail is slow). This is in contrast with my performance when using, e.g. linuxdcpp (file sharing), where I get speeds over 300kbps. Here is some relevant information:
I have apache working,i have users set under admin group in /home/admin/username/html that is with an html publicfolder at the end, now permissions are set right, /html is set to mode 777, and the contents also inside them. But everytime i do a 10.0.11.25/~les i get a damn forbidden error code, its got me so pissed off and i dont' know whats the problem. This is the error i get: Forbidden 403 You don't have permission to access /~les on this server.
Code:
[Tue May 05 19:37:48 2009] [notice] Apache/2.2.11 (Unix) DAV/2 PHP/5.2.6 configured -- resuming normal operations [Tue May 05 20:44:30 2009] [error] [client 10.3.0.254] (13)Permission denied: access to /~les denied
I am trying to set up a web page for the business and we have had the website or domain for a while but no one has put anything on it. I have never done anything like this before so i typed in the website and got the apache test page saying that i should add this: /var/www/html/
1) i'm not really sure what to add it to 2) i've tried adding it to the website url and that comes up with invalid page 3) could someone please explain in simple terms how i can get on to the webpage so i can start adding content to it?
I had installed and checked lamp stack last night but today when I type http://localhost the fodora test page for apache didn't come up. It is just blank. I had also configured apache to load after every boot.
Since I upgraded to 11.04 on my Server edition I have been experiencing some problems with my FTP-server and Apache. Apache just says that the page is "forbidden" if I'm not logged in on the server, which means I need to go to the server and physically log in or I can do it trough ssh but then when I close my ssh client on my work computer the page is "forbidden" again. And I cant seem to reach the FTP-server from an external address so I need to be in the network to access it.
It says something like: Code: An error occurred opening that folder on the FTP Server. Make sure you have permission to access that folder. 200 Switching to ASCII mode. 227 Entering Passive Mode (192,168,0,194,233,166)
I am getting this error whenever I access the page:
Code: PHP Warning: fgets(): supplied argument is not a valid stream resource Any idea whats all about? I explored and found it permission issue. I want to put a user call paul in apache group.Any idea how can I do that?
I not a total noob to linux only a noob to apache.I am Running A lamp server on A VPS with myhosting.com. but try as i might i cant apache2 to load the right page. I have set document root to /slk/redretriever/ but when i load the page it still loads /var/www/vhosts/default/htdocs/.I cant figure out why please help.
I have created a php page with only PHP Code: <? php echo "OK"; ?> in the code. When I go to that page in a browser, I get a blank page. Is that normal, or am I suppose to see the word "OK" displayed in a browser? When I became curious, I open up Wireshark to capture the packets, I see that my server is giving out a "HTTP/1.0 500 Internal Server Error".
Here's the entire tcp stream: Code: GET /services/test.php HTTP/1.1 Host: 192.168.1.5 User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 .....
I run Linux RedHat and want to find out how can I replace the standard Apache 503 error page with my own? This is my configuration in the httpd.conf file for error pages. Can I just edit the HTTP_SERVICE_UNAVAILABLE.html.var in /var/www/error directory and replace the content with my own , or how can I accomplish my goal?
When I try to start Apache2 (apachectl start) the command prompt returns right away. But when I check the processes (ps ax) I can't find httpd. And when I try to hit the server from a browser I get "the page cannot be displayed" error.
I've configured in apache on linux to display custome error page for error 403.i just entered the following line in httpd.conf file ErrorDocument 403 /path/for/html/file...Here we are using Https.Any idea how to configure it so that the custom error page is displayed my .html file?
I have apache installed and I have it all setup so that when I create a user, in their home directory i created a folder called public_html and then that user can upload web content. Users then can browse to their site by going to[URL],,.How can I get apache to show a different or default page if the user does not have a index.html file in their public_html folder. Cause if they dont, you get a 401 saying you dont have permissions to view, etc. So id like apache to default to something else if the user doesnt have a index.html.
when I try to view my root directory of my website.if I go to URL... on my computer, it always loads the "It Works!" page. I deleted the original index.html page, and even replaced it - but if I go to URL... it KEEPS coming up.If I specify the page I want to view, ie.URl... it loads the right file.Is there a setting in the conf file that Im missing?
i have installed fedora 11..when iam opening my apache default test page using http://localhost its opening but when iam trying to open the same using my ip address i.e. http://172.31.73.4 its not opening..instead iam gettin an error message like this in firefox
ERROR The requested URL could not be retrieved....While trying to retrieve the URL: http://172.31.73.4/can anyone tell me whats the problem because till now i was using fedora 8 and while using apache i never got this sort of problem..
I have a domain, dns hosted, and apache serving up pages. this all works fine, so far. i even have a cms running. my confusion starts when i try to host a different site under a subdomain, ie. sub.mydomain.com.i have two vhosts in apache. one is mydomain.com and the directory is /var/www/mydomain.but, when i try to add another vhost like webmail.mydomain.com, and i try to put the root directory in /var/www/webmail, it doesn't work. when i try to access webmail.mydomain.com, i just get the site on mydomain.com.I feel like i am just missing something really simple here, but i have tried searching around for solutions to no avail.
quesiton is how I can redirect http://www.thispage.com to http://my.page.com and still retail displaying http://www.thispage.com.The issue is if I point in httpd.conf to directory where my.page.com it doesnt work because it knows it address.
Been a very long time since I have played with Linux.Now in a new position and have setup a Nagios server running on Centos 5,5 for a NMS.How do I set apache that when I visit: whatever.org it starts Nagios.. Currently I have to go to whatever.org/nagios.
I'm running wordpress and have gone to the painstaking effort of setting up the ftp server on my 5.3 machine so it can do its own updates and download plugins. However, I've found that if I try to download anything, I get a "unable to resolve host..." error from the script. If I watch Iptraf while making the request, I see all the port 53 requests going to 127.0.0.1. Pings are too.
However, if I ssh in, I can ping and wget and whatever I want all day long and all the DNS requests to go the router (Clarkconnect 3.2 gateway machine). The web browser in the terminal works fine too. What is it about the php scripts that is causing them to misdirect pings and dns requests? I've never seen anything like it and can't find anything on the web about it either.
I just getting back to working with linux. I'm having a problem with what seems to be an iptables thing or something easier than that, Enough here is the question I can get apache to run on the local machine by either going to http://localhost or by the ipaddress on the CentOS machine. But for some reason when I try to take a look on my laptop (on the same network) and try to go to it using the IP address is doesn't go. I can ssh from my laptops but it will not open the apache startup page.
But after it updated and I restarted the service, it's reporting 2.2.0 on any error page. Yet through yum it's reporting 2.2.13-1. Is that normal? I've only ever used 2.2.x, starting with 2.2.6ish.
