Debian :: Apache 2 - Changing DocumentRoot To Public HTML
Mar 25, 2010
I'm pretty new to Debian, and I'm trying to set up Apache 2, and I want to set the DocumentRoot to public_html in my home dir, but I run into some problems.
I tried to change this (/etc/apache2/sites-available/default):
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /var/www/
<Directory />
Options FollowSymLinks
AllowOverride None .....
When I restart apache I get a 403 error, and when I change it back to its original, it works fine. I want to change the DocumentRoot so I can upload files via FTP to ~/public_html.
~/public_html has the mode 777.
View 9 Replies
ADVERTISEMENT
Nov 21, 2010
I unable to start the httpd service coz i try to configure a subdomain. It prompt the error below:
[root@server conf]# service httpd restart
Stopping httpd: [ OK ]
Starting httpd: Warning: DocumentRoot [/etc/httpd/var/www/html] does not exist
[code]...
View 7 Replies
View Related
May 6, 2009
I have apache working,i have users set under admin group in /home/admin/username/html that is with an html publicfolder at the end, now permissions are set right, /html is set to mode 777, and the contents also inside them. But everytime i do a 10.0.11.25/~les i get a damn forbidden error code, its got me so pissed off and i dont' know whats the problem. This is the error i get: Forbidden 403 You don't have permission to access /~les on this server.
Code:
[Tue May 05 19:37:48 2009] [notice] Apache/2.2.11 (Unix) DAV/2 PHP/5.2.6 configured -- resuming normal operations
[Tue May 05 20:44:30 2009] [error] [client 10.3.0.254] (13)Permission denied: access to /~les denied
[code]....
View 10 Replies
View Related
Mar 3, 2010
How can I forward all traffic from a public IP to another public IP. Let's say I have a first debian box named box1 with eth0 = 1.1.1.1 and eth0:1 = 1.1.1.2 and I want to forward all traffic from 1.1.1.2 to "box2" located somewhere else over the internet and having for eth0 2.2.2.2 Both 1.1.1.0/24 and 3.3.3.0/24 are public IP ranges.
View 1 Replies
View Related
Sep 28, 2009
I have installed the CentOS 5.3 on VMWare. Then I Have Installed Apache ,PHP , Mysql with the flowing Command :
yum install httpd
yum install php
yum install mysql
yum install mysql-server
yum install mysql-devel
yum install php-mysql
Then I tested my Web Server , Data Base server and PHP Whit Create A PHP Page that work to Mysql this Test is successfully. Next I ping my machine IP (192.168.6.131) and then Ping windows xp machine. Even I Ping My Linux machine in Windows XP. But when check the PHP Page Or Local host in Linux machine whit Browser (IE or FF in XP), Response (IE:) Cannot display the webpage or (FF:) The connection was reset.
View 3 Replies
View Related
Dec 10, 2010
why Apache is not parsing php code inside html files in LAMP? Whereas the same is working fine in WAMP..
View 6 Replies
View Related
Apr 19, 2010
I'm sure this is something simple, but I've googled all over and can't find the answer for the life of me. I've got an apache server and I need to redirect all requests to HTTPS in the same domain, except for 1 html file the load balancer hits and needs to get a 200 on. Can anyone point me to some documentation or show me what I need to add to the httpd.conf file to get it working properly?
View 1 Replies
View Related
Mar 15, 2010
I've reinstall the apache because of a starting problem and now it give me to download HTML files.
View 7 Replies
View Related
Aug 26, 2010
I seem to be unable to use the html
Code:
include virtual="test.txt" I have tried following the advice in this thread http://ubuntuforums.org/showthread.php?t=1510098 but it makes no difference. The file is there, but the line is delivered to the browser as-is. Using Lucid and a new install of apache 2.2 from the repository.
View 7 Replies
View Related
Aug 25, 2011
My setup is two laptops connected by crossover cable. One runs Windows xp the other Fedora 13. Neither is connected to internet. I'm using a subnet of 192.168.1.x On Fedora eth0 is up, apache runs because it creates pidfile. Everything pings fine. Windows xp ip pings fine from command line. Gave Windows xp a static ip of 192.168.1.1 mask 255.255.255.0 and gateway 1.2, same as eth0. xp says it sees the server. eth0 is up.
DirectoryIndex looks at index.html. I created that file with very simple code and put it in document root. Document root permissions are 755. Access_log 770. Error_log 644. Apache User 755. Listen 80 When I type the ip for eth0 (192.168.1.2) into firefox, firefox gives me an error message - can't find server. The connection status says its connected.
The error log includes a line: [warn]./mod_dnssd.c:No services found to register I don't know what this means. Apache is not writing to access_log. When I cat the path to access_log I get nothing, then a command prompt. I'm looking for the part I'm missing that will let Apache serve that index.html file to firefox so I can see how my code looks to firefox as I go.
View 6 Replies
View Related
Aug 16, 2010
Do I need to restart the webserver if I make any change in the file index.html? Or should the changes get reflected when I open the page again without restarting the service?
View 3 Replies
View Related
Jun 12, 2009
With F11 installed Apache is having permissions issues reading files out of the html directory. Only wants to work with permissions set to read for other. [Thu Jun 11 23:25:28 2009] [error] [client 127.0.0.1] (13)Permission denied: file permissions deny server access: /var/www/html/index.html Tracked down the permissions issue. Is there a good reason not to change the group to apache and remove world read?
View 1 Replies
View Related
May 20, 2010
Today, the power was suddenly cut off in my house, then my home Ubuntu Server restarted after the power on, but when I use my laptop to view my wesite, the index.html suddenly became blank page, I did clear the firefox cache, doesn't work, still blank, and I changed browser, to seamonkey, the index.html still was blank, so, I am sure that the problem is coused by the server, and then, I put the index.html file to a subdirectory, which under the /var/www/home/index.html, and then I put the address < [url] > ,then,I can view my website the main page index.html.
View 2 Replies
View Related
Jun 18, 2009
I want to put Google analytics code on all legacy pages on my server, most of them don't have a template so I was wondering if Apache can automatically append the code.
View 2 Replies
View Related
Oct 27, 2010
I've searched the forums (250 thread limit) for a fix on this, but all the questions seem unanswered or unrelated. My situation is this: I'm running Ubuntu x64 10.10 'Maverick'. I have a cablemodem connection for my Internet access. I have home network running on DD-WRT with the dreadful Linksys WRT54G series router.
My DD-WRT router is 192.168.1.1, subnet 255.255.255.0.
My Linux box is 192.168.1.61, subnet 255.255.255.0.
I have a VyprVPN connection set up successfully on Linux. Mostly everything works great, speed's fine, latency is what I expect it to be. Except... I also run an SSH server to remotely admin the box at port 22, an Apache server running over SSL at port 7001, and a Transmission web client at port 7002 (only secured by basic HTTP realms auth). All of these things worked before I got the VPN working, I'm of course using NAT at the DD-WRT router.
The endresult I am looking for, is to have the security and protection of the VPN (even if it's only perceived) for everything I do on this machine -- EXCEPT on Apache, the Transmission web panel, and the SSH server, which I want to access from the outside world. I have no firewalls running or configured, not even iptables, not even the SPI firewall on DD-WRT. All connections to the aforementioned services from the outside world timeout coming in to the Linux box. They all work from inside my home network (182.168.1.0/24). In case it's needed, he's my routing:
[Code]....
View 2 Replies
View Related
May 22, 2011
I would like to set-up a pretty fast a running apache. I would like to use him so to launch a pretty small web site of 10 static html pages. At this time there is no security concerns (even though I want to do it right) , because the computer has not even ethernet cable. I have some experience, 8 years ago I Was setting up virtual hosts in fedora, so this process is not a blackbox for me.
View 9 Replies
View Related
Oct 20, 2009
I suspect that this has come up numerous times, but I am new to Linux and I am setting up a new in-house server using Ubuntu 9.04 and Apache, etc. I can see the welcoming "It Works!" message when I log in via Firefox. I can see "index.html" when I FTP the server with the site name and password at /var/www. I can also see the -rw-r-r-- attributes, but I can't edit the HTML file or replace it. When I try to rename the "index.html" file.
I get the following message: "Request denied. Verify that the file or folder exists and that you have the necessary permissions on the server to perform the requested operation."
I haven't been able to determine where to enter the password or what changes I need to make to be able to work with the /var/www directory via FTP.
View 4 Replies
View Related
Oct 25, 2010
I have to develop a php script, that acts as a man-in-the middle for a db-like-software and a webshop. This should run on a server within a DMZ, behind two firewalls, that should filter every request from other sources, than the eshop, and any other protocol than HTTPS. This server is a debian-machine, with a apache 2.2 and php 5.3. I've installed apache and php without any problems, installed openssl, generated a certificat and installed it. I tested the connection successfully. The eshop-server can connect to the server inside the DMZ without problems and receives a correct answer.
The db-like-software (called "netbasic") generates a csv-file in a fixed directory. this csv-fils has an owner called "netbasic". The file-access-rights are: -rwxr--r-- (I've some problems to interpret this. I know, r stands for read and w for write, x for both and the order is for different usergroups). My problem is now, that my php-script tries to read the file (successfull), generates output (successfull) and then deletes the file (failed -> permission denied). I figured out, that the problem is, that apache (or, I don't know, just php) don't runs as root and has therefore no write-permission. Because the server is already secured with the firewalls, we, my workmates and me, don't see a problem, to change the apache-user to root. but I don't know how this is done and don't know, what to search for.
View 7 Replies
View Related
Jun 17, 2009
I've run into some problems trying to change the default cgi folder from /var/www/cgi-bin to /var/www/cgi-local (in order to migrate scripts from a much older server to a new one). I have edited httpd.conf to modify the following:
Code:
ScriptAlias /cgi-bin/ "/var/www/cgi-local/"
#
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/var/www/cgi-local">
[Code]...
I have also tried several variations. I left ScriptAlias at the default "/var/www/cgi-bin" and I have tried it with AllowOverride None and without the +ExecCGI after Options. I am getting a 404 error when a form has an action directed at a cgi script that is in cgi-local.
View 4 Replies
View Related
Sep 19, 2010
I've had apache installed for a couple of years with no problem but this morning I thought I would change the apache document root to my secondary disk so that my WAMP setup in my Windows partition and LAMP could share the same files. I've edited the etc/apache2/sites-available file to point it to the new location of my document root but I am getting a 403 - forbidden "You don't have permission to access / on this server." error when I try to load files through the browser. I'm not sure if this is a permissions issue or the way I've edited the sites-available config.
Here is the new sites available config:
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /media/Data/webroot
<Directory />
Options FollowSymLinks
AllowOverride None .....
View 5 Replies
View Related
Jan 5, 2011
My ISP Blocks port 80 so I changed the port to 8081 after I do this and restart Apache and use my IP with :8081 after I get a page saying Not Found The requested URL /index.html was not found on this server. I get this same message if I use my real IP or the IP from my router. What can be causing this?
View 2 Replies
View Related
Apr 13, 2010
When I want to change my docroot in /home/Vincent/www or /home/Vincent/www/ it gaves me an.
:Syntax error on line 278 of /etc/httpd/conf/httpd.conf:
DocumentRoot must be a directory
I googled it already and they sad that you have to type in:
chcon -R -h -t httpd_sys_content_t /home/Vincent/www << doesn't work so I tried also chcon -R -h -t httpd_sys_content_t /home/Vincent/www/ But nothing seems to work?
View 1 Replies
View Related
Jan 14, 2010
[root@xxx webalizer]# pwd
/var/www/html/webalizer
[root@xxx webalizer]#
[root@xxx webalizer]# ls -all
total 4924
drwxr-xr-x 2 tomcat tomcat 12288 Jan 1 04:03 .
drwxr-xr-x 16 tomcat tomcat 4096 Jan 14 10:01 ..
-rwxrwxrwx 1 tomcat tomcat 2606 Dec 1 2006 ctry_usage_200611.png
[Code]...
When I go to http://myserver/webalizer I only see the 2007 reports and I want to see all the years and months. How do I do that ?
View 13 Replies
View Related
Apr 11, 2011
On Godaddy's Simple Control Panel for their dedicated servers, the URL defaults to URL... I would like to change the location to URL....
View 1 Replies
View Related
Aug 2, 2011
I'm trying to write a p2p file sharing program using python's built-in libraries. Everything is going well. The only thing is that i'd like to be able to use openssl public and private keys so only a host with the public key could access/decrypt the filesharing. I've gotten these libraries (httplib, basehttpserver, ssl, os) to work using just a pem file containing both the public and private keys but no success with them seperately. Can someone point me in the right direction or offer an alternative? PS, the goal of the project is to create an anonymous, decentralized, secure file sharing program. I want to be able to upload this to sourceforge so everyone can use it, if that's any incentive
View 2 Replies
View Related
Sep 24, 2010
I run the following file with the >log.log redirector and it does not capture errors.
#!/bin/bash
echo ************************BEGIN LOG******************************
date +"%m/%d/%Y %H:%M:%S $HOSTNAME"
cp -f /scripts/original/clamscans.log /scripts
[code]....
The following errors show up when I run from the file from the term window, but are not written to log.log:
tar: /public/public/clamscans/*.txt: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
mv: cannot stat `/public/public/clamscans/*.txt': No such file or directory
I know with windows you can add the 2>&1 to capture error data. Is there such a thing for Linux?
View 2 Replies
View Related
Mar 9, 2010
I used wget -r to get all the web pages that were linked from index.html. The pages listed in index.html are all chapters. After using wget -r, all the chapters are now in the same folder on my local hard drive. Is there a way to build the chapters in their proper order into a "long"/"full" web page, rather than simply having each chapter as a link/next link on a previous page?
View 9 Replies
View Related
Sep 12, 2009
what is the best way (i.e standard way that is supported on all browsers and probably as well followed by web crawlers).... to include an html file either locally or externally in another ? Of course , i've done the research and i also know that there are server side includes (php , asp ...you name it) at the moment , i'm using this:
Quote:
<script type="text/javascript" src="path to file/include-file.js"> </script>
however, i've been warned that this method may not show up in some browsers as some tend to ignore this tag and that crawlers like your favorite search engine wouldn't bother reading this. so , what is the best and safest way to do the job? and btw , the reason why i've ousted SSI's from the start is because of among other things:
1) the fact that the included file is static html and because the text is included pretty much everywhere
2) hoping to reduce load time as the code (if successfully recognized) would hopefully be treated like any other embedded external file (e.x like an image) , therefore it would be cached without the need to downloaded it over and over again for each new page on the site.
View 1 Replies
View Related
Jun 17, 2011
On my stable/squeeze computer, I have /etc/ssh/ssh_host_rsa_key.pub but I cannot find this in my testing/wheezy computer. Why can't I find it? Did the way to retrieve one's public rsa key change? I have openssh-client and openssh-server installed on both computers.
View 2 Replies
View Related
Jul 24, 2011
I am very new to encryption. Right now I am making certs and keys using RSA public-key cryptography. Is RSA the best? What other public-key cryptography <?> is there to use? Is <?> a cipher or algorithm? Whats the difference?
View 2 Replies
View Related
